Satellite L500-19x crashes when loading software from dvd

Satellite L500-19x crashes when loading software from dvd. This is photoshop elements 9. Other software generally loads ok, but not always.
Any ideas?

Hi shownomercer,
Have you tried the Photoshop disk in another computer to check if the installation disk is ok or not?
What happens exactly when the computer crashes? Bluescreen?

Similar Messages

Satellite Pro L100 crashes when loaded with 2 x 1GB Ram

Hi,
Satellite Pro L100 - came with 512MB ram - Too slow - expanded using 2 x 1GB ram from crucial technology, speed 555MHz
When both 1GB installed, laptop crashes on the XP boot screen - then loops, crashes, loops, crashes etc...
Tried alternating the slots and using ram independantly - No change - so ruled out faulty ram
Tried shippped memory with 1 x expanded 1GB ram - All OK.
Tried every orientation conceivable - just crashes when expanded ram is loaded to its specificed max - 2GB.
Upgraded BIOS to 3.2 - no change
Does anyone here have any other suggestions? I fear my last resort is to dig deep and get more ram from a diff OEM, prefer not to hence asking politely for help
Thanks in advance,

Have you ran Memtest?
Download the bootable Memtest CD ISO from www.memtest.org and run it for a few passes.

FCP keeps crashing when loading thumbnails from bin

Hey folks,
I am having constant issues where FCP keeps crashing when I load a bin with thumbnails. This doesn't happen every time I open a bin, but after I open say 6 or 7 bins. After the research I have done I have come to a couple of possible solutions 1= this previous post
http://discussions.apple.com/message.jspa?messageID=9545404#9545404
The only thing that is stopping me from trying this procedure is I don't have another Mac with the VADriver, so I have to extract it from the OS DVD, which is fine thanks to the Pacifist program which makes it easier, but I don't know how to get the specific file extracted.
I also noticed that the guy who solved the same issue with this procedure has an older OS to mine, so surely with the new OS the problem would have been resolved??
2= the other solution seems to be to put the footage onto a hard drive with a faster connection other than firewire 800. But this doesn't seem right to me because the project worked perfectly fine on the old PowerPC Mac using the same external FW800 drives I am using on this computer.
I would appreciate any advice. at this point I am probably wasting around 1-2 hours a day with FCP crashing and having to reopen the project to work on it again.
Anyone having similar issues?

Here's what the fabulous Crash Analyzer says about it:
*MPEG Media*
This crash appears to have been caused by MPEG media (or MPEG-derived media such as XDCAM, HDV or H.264) in the timeline. MPEG-based media is not recommended for editing in Final Cut Pro.
*Suggested Actions*
Set the codec of your sequence to ProRes in Sequence Settings.
Alternatively, and for best results, transcode any HDV, MPEG-2, XDCAM, AVCHD, H.264 or other long-GOP media into an editing-friendly format such as ProRes or Apple Intermediate Codec (AIC).
*Relevant Line*
0 QuickTimeH264.scalar 0x0f7114d7 JVTCompEncodeFrame + 2769062
Report generated by Crash Analyzer in FCS Maintenance Pack
You can download a fully working demo of Crash Analyzer from Digital Rebellions website ... and then you should buy it! Its worth every penny.

Finder crashes when loading previews from card reader

Hi there,
Hope someone can help me! I just plugged in my Compact Flash card into my USB2 card reader and went to preview the images in the Finder.
After loading a few, the Finder window vanishes (I suppose it crashes?).
I've tried deleting user caches, also deleted my Finder prefs file - same thing!
Any ideas? I'm a photographer and shoot a LOT of images - I've never had this problem before!
Regards,
John

Try copying them to your hard drive first. I know that whenever I open more than a few pictures from an SD card in my USB 2 media reader (or PC Card adapter, for that matter) it takes forever - and more than a few hundered photos have crashed my Mac before.
I think these cards are just too slow for opening many photos in preview - but copying them to my internal drive before previewing always works.
Good luck,
-Dan

Final cut pro x crashes when loading files from my external hard drive.

please help!

Sorry, but I'm not following you very well. Perhaps some else who does will weigh in and help.
evliz98 wrote:
Movie files.
The term, movie files, covers a lot of territory. What format? Open in Quick Time, hit Command–I and post a screenshot.
My files are stored on an OWC external hard drive.
Project and Events?
If I drag a file to my computers hard drive, the applications starts up fine. SMH.
Drag what kind of a file? Projects need to be opened from within FCP.
Russ

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

Re: Satellite L500-19X - Webcam application start with Windows

I have lost my Web Camera Application from off the desktop.
I can bring it back by going to the Web Camera Application / Program files(86) / Toshiba/ Web Camera Application and clicking on the Web Camera Application .exe. But it will not reappear when I boot. I have the Auto Run ticked,
My laptop is the Satellite L500-19X, Windows 7
Thanks for any help.

Thanks to all the replies I have now got the Web Camera Application working properly.
Dr.Lamp the download link you gave me has enabled the Web Camera Application.
The problem I had with installing the driver ie Windows Script Host error, not allowing me to install the driver, I overcame by not allowing the zip file to extract and install. What I did was create a new folder on the desk top, and instructed the zip to extract but not install the contents into the new folder. When all the files had been extracted to the new folder, I opened the folder and clicked on the .exe file. To my amazement and joy, the software ran and first removed the existing software, I rebooted and clicked again on the .exe and the software installed. I now have the web camera application on my desktop and it re-appears after a re-boot.
Message was edited by: Altone
After reading the replies that was given while I was writing my last post, can someone enlighten me regards whether the action I took was the correct action to take, I am concerned that I may still have further problems regarding the 'Error message Cannot find script engine'

Safari keeps crashing when loading large data on web pages

I have owned my iPad 3 for more than a year now and I have never encountered this problem but ever since I have updated to the latest iOS version(7.1.1), my safari keeps crashing on my community site where threads have maybe over a 100 comments in them.
Now whenever I open a thread page on Safari, it loads for a few seconds then crashes, to make things worse for me is one in a while when it crashes, it reboots my iPad. I have seen several similar questions asked by other people regarding safari crashing when loading large amounts of data and got help saying that there's something wrong with the CSS. or something but I never got any idea on how to resolve this bug.
Can anyone tell me how do I prevent my Safari from crashing everytime I open a thread? Any solutions? Because I am getting really ******.
(Ps: I have already tried other browsing apps such as Google Search and Chrome, they still crash. I even tried letting it load half-way and then stopping it but it isn't going well.)

I have restored my iOS devices a number of times in order to resolve issues and it has gone very smoothly every time. I am not going to lie, it takes a fair amount of time to backup, restore the iOS and then restore from the backup, but it could very well resolve the issue.
On the other hand, it may not help at all. Restoring the software is a standard troubleshooting measure And that is why it is recommended when other suggestions aren't working. But before you restore, there are a couple of other things that you could try,
Reset all settings. Settings>General>Reset>Reset all Settings. You will not lose any data when you do this, but it does take some time to enter all of the device settings again, so be aware of that.
Another thing to try is to erase the device and start over. This is different than restoring to factory settings. Reads rhis for more information.
iOS: How to back up your data and set up your device as a new device

Satellite L500-19X: Win7 install won't work - stuck on syswow64 loop?

I've tried to reinstall Windows 7 on Satellite L500-19x but it won't complete - every time I boot up laptop a white splash screen appears saying "preparing to install...may take a few minutes" but this never disappears...can get out of this screen by starting task manager and hitting escape a few times.
When get as far as desktop things seem to be in order except for command prompt running Syswow64/sysprep/...access is denied on continuous loop, also there is a window saying "TUPIT 2" which seems to have failed as there is a "requested registry access is not allowed" in front of it.
Would really appreciate if somebody could tell me how to fix this as it is extremely frustrating and seems to be so close yet so far to being successfully completed!

Hi
This message is very strange. Had read in internet about similar issues but the issues were always related to the registry problems.
In most cases the error message appeared trying to repair the Windows OS.
Did you try to make a clean installation?
I think you should format the HDD firstly before trying to install the Win 7.
Hopefully everything would be erased from HDD before starting the setup installation

Re: Recovey menu does not appear on my Satellite L500-19X

Hello,
I cant start my toshiba laptop L500-19X.
When I start appear two option menu. 1.Start normally or 2. Recovery mode. Both options cant run windows 7. I only obtain black window without seeing any windows.
I try pressing F8 to enter the detailed recovery menu. I select the Repair Computer option waiting for the Toshiba Recovery Options Menu but it does not appear. The only thing appears in the screen is the mouse pointer in minor resolution mode, but i cant see the menu, and this stills forever.
What can I do?
Thanks.

After I press Repair You Computer in the F8 menu, the next screen shows a progress bar with the message: "windows esta cargando archivos..." (windows is loading files). When the progress bar finish appears a few seconds a new screen where I can see a symbol as if w7 is loading, but 2..3 seconds after goes to a black screen. And more seconds after, even minutes, appear the mouse cursor, but after it happens nothing, and I dont listen hdd work forever.
Thanks.

Further GarageBand crashes when loading lessons ...

Hi All,
I've GarageBand installed on a Mac mini server (the new Apple ones). When I try to open any lesson it silently crashes. The
I've seen the other thread with similar title and tried replacing the "Gill Sans.ttf" font with a "Gill Sans.dfont" from another system. Rebooted. Still crashes.
I've fixed permissions. Still crashes.
I tried deleting everything - everything - GarageBand related on disk and reinstalled and updated. Same problem. Crashes when loading lessons.
The console has a whole lot of these:
2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.519 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
2/26/10 11:42:07 PM pkgutil[2221] PackageKit: * Missing bundle identifier: /Library/Receipts/php-4.3.4.pkg
2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.577 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/php-4.3.4.pkg
2/26/10 11:42:07 PM pkgutil[2221] PackageKit: * Missing bundle identifier: /Library/Receipts/php-5.0.3.pkg
2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.578 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/php-5.0.3.pkg
2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] No receipt for 'com.apple.pkg.RemixTools_Instruments' found at '/'.
which may be a result of the fact that I migrated OSX 10.5 server to OSX10.6 server.
It also has:
2/26/10 11:42:08 PM MIDIServer[2222] MIDIServer [2222] starting; arch=x86_64
which seems ok.
But crashes with this:
2/26/10 11:42:17 PM com.apple.launchd.peruser.501[297] ([0x0-0x1f01f].com.apple.garageband[2211]) Job appears to have crashed: Bus error
2/26/10 11:42:17 PM ReportCrash[2209] Saved crash report for GarageBand[2211] version 5.1 (398) to /Users/admin/Library/Logs/DiagnosticReports/GarageBand2010-02-26-234217server-2.crash
I can't see anything in the crash files, except it looks like it might be trying to open a file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x914c6a90 strlen + 16
1 ...ple.CoreServices.CarbonCore 0x973a636c FSMount::makepath(unsigned long, char const*, unsigned long, char*) + 140
2 ...ple.CoreServices.CarbonCore 0x973a2621 FSMount::_getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*) + 179
3 ...ple.CoreServices.CarbonCore 0x973a2529 FSMount::getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*) + 279
4 ...ple.CoreServices.CarbonCore 0x973ecf96 FindHFSName2Retained(void*, short*, unsigned long, unsigned long, FSAttributeInfo*, char*) + 1017
5 ...ple.CoreServices.CarbonCore 0x973ed27c PBMakeFSRefSync + 115
6 ...ple.CoreServices.CarbonCore 0x973ed206 FSpMakeFSRef + 45
7 com.apple.music.apps.Logic 0x00c2cb4e LgSamplerGetFileNameForKey + 147646
8 com.apple.music.apps.Logic 0x00a1e7f6 CSetVSong::~CSetVSong() + 1146438
9 com.apple.music.apps.Logic 0x008d280f LgDocument_MovieFullPath + 47
10 com.apple.garageband 0x000b66dc 0x1000 + 743132
11 com.apple.garageband 0x00272f78 0x1000 + 2563960
12 com.apple.garageband 0x00270257 0x1000 + 2552407
13 com.apple.garageband 0x002713a8 0x1000 + 2556840
Any suggestions or help most appreciated.
Cheers,
Ashley.
Message was edited by: Ashley Aitken

Have you tried to delete the downloaded version from the Applications folder and to reinstall from the AppStore? Perhaps the download was incomplete.
If that is not the problem, check all your Audio Units, and other plug-ins like VST plug-ins for compatibility, see: GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins

IPhoto crashes when loading

iPhoto crashes when loading. I am on 9.1.2 & I think this may have started after the update was applied on the 27/4 and the error message does not mean much to me
Process:         iPhoto [1472]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.1.2 (9.1.2)
Build Info:      iPhotoProject-6050000~2
Code Type:       X86 (Native)
Parent Process: launchd [409]
Date/Time:       2011-05-06 13:01:43.756 +0100
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          123013 sec
Crashes Since Last Report:           20
Per-App Interval Since Last Report: 10155 sec
Per-App Crashes Since Last Report:   11
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 37

That's a different crash. When you re-installed, did you delete the receipts first?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD

VMware crashes when loading VMware Player unrecoverable error: (vmx) NOT_IMPLEMENTED d:/build/ob/bora-203739/bora/vmx/main/pollVMX.c:3981

VMware crashes when loading VMware Player unrecoverable error: (vmx) NOT_IMPLEMENTED d:/build/ob/bora-203739/bora/vmx/main/pollVMX.c:3981

Hi,
Please next time do not post a full log as content of the post, instead use the browse button to attach as file.
Also add a little bit of background information, like if you installed fresh, has it worked before, has anything changed, what is your host OS?
The relevant part in your log appears to be:
May 18 12:10:07.330: player-3900| Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Users\Columbus\Documents\Virtual Machines\Windows XP Home Edition\Windows XP Home Edition.vmx
May 18 12:10:07.330: player-3900|
May 18 12:10:07.423: player| Unhandled Win32 SEH exception
May 18 12:10:07.423: player| ----Win32 exception detected, exceptionCode 0xc0000005 (access violation)----
Either you have some security software (firewall, antimalware, antivirus) not allowing VMware Player to connect to the vmware-authd port or your install is broken and you have to rerun the install (uninstall, reboot, install, reboot)
Wil

When installing software from a Canon EOS CD, my Imac says I dont have the right permissions ... I am the administrator !

When installing software from a Canon EOS CD, my Imac says that I dont have anough priveledge to install, and to log on as administor.
I am the administrator.. but I created an account called administrator.. didnt work.
I thought the CD was bad, and got anoter copy that I know was loaded on another mac.. same problem
I even repaired permissions with the disk utility.
Disk: EOS Digital solutions ver 23.0
Thanks for your help
< Email Edited By Host >

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

How to load software from a small sized CD on macbook pro?

How to load software from a small sized CD on MacBook Pro?

Welcome to Apple Support Communities
The disc drive of the MacBook Pro does not support mini CDs, so you need to get an external DVD drive that supports mini CDs. After connecting it, insert the mini CD and install the application you want.
If you have got another PC with a DVD drive, you can use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

Satellite L500-19x crashes when loading software from dvd

Similar Messages

Maybe you are looking for