Satellite L500-1ek - setup system always starts with 800x600

I have new Satellite L500-1ek notebook with Windows 7.
Whatever screen resolution I setup system always starts with 800x600. And not only after restart but even when I logout my profile and login again.
More: I use also external monitor. I can have mirror of my laptop screen on the monitor or only display on monitor but whatever I do I cannot have extended screen.
When I try to set it up I'm simply ignored by driver.
So I tried to install newest driver. I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
What to do now?
Marek

Hi Marek,
> I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
As far as I know your notebook is equipped with Intel graphic card and so you are installing the latest display driver from Toshiba website. Is this right?
Well, I have to say that I had the same issue on my Satellite U400 that is also equipped with Intel graphic card. The solution for this problem was pretty easy: I installed the driver via device manager. There select the graphic card, make a right click on it and select Update Driver. In next windows choose the advanced installation where you can choose the driver directory yourself. After the installation make a restart and thats all! :)

Similar Messages

Phptoshop CC always starts with window open

Dear reader,
Photoshop always starts with opening a window (grey) at start-up or when closed en re-opened. How can I close this window permenently so that i can see my desktop when closing last Photoshop picture (window).
With kind regards.

Sounds like your on a mac and want to turn off the Window>Application Frame

Copy all the objects from the one system that start with (ZANK)

hi to all,
I have installed the name space /ank/ in the US system, we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/. problem is how can i copy objects and re-create.
thanks

Hi Ankal,
I guess this is your second thread on the same question. Ok provide these information
>>I have installed the name space /ank/ in the US system,
Are you saying that you have a machine (US System) and i has a namespace /ank/ ? What all objects are there in this namespace?
>>we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/.
Is the India system on the same US system?
Also tell me whether you have opened the home page of SAP XI/PI? If yes , are you able to open Integration Repository? If yes then how these US and India systems are referred in Integration Repository? Are they referred as separate software components?
Regards
Suraj

[SOLVED] XFCE always starting with the US keyboard

Hi guys.
Recently I came back to XFCE and I have one problem: it always starts with the keymap set to US. I have to manually change it to PL (which I need) with setxkbmap. Also, when I'm using the panel plugin I cannot choose any keymaps other than the currently selected.
What can I do about it?
Last edited by JeremyTheWicked (2008-10-12 21:49:56)

The way I deal with the multimedia keys is that
1) figure out what keycodes they generate (run 'xev' and do some presses)
2) assign the correct name to them via xmodmap
maybe 3) use xbindkeys to let them do what they should do (but this is probably not necessary, DEs like xfce should be able to act just based on having a correct name assigned to the keypresses)
the xmodmap stuff:
~/.xmodmaprc wrote:keycode 144 = XF86AudioPrev
keycode 153 = XF86AudioNext
keycode 162 = XF86AudioPlay
keycode 164 = XF86AudioStop
and then have 'xmodmap ~/.xmodmaprc' executed at X start (again, some DEs do this automatically, some don't)
But! maybe figuring out the correct option for your keyboard might render all of the above steps unnecessary. I don't know a good place to look for the options, except closely inspecting the contents of /usr/share/X11/xkb - there's a lot of stuff, but that's for instance where I found out the possible variants for the us keyboard.

Tetris always starts with the same blocks

Has anyone else noticed that the first game in Tetris after launching it always starts with the same blocks? For me, it always gives me the red "Z" block, the yellow square, the green "Z", orange "L", purple "T", blue straight block, blue "L", and so on. Every time. Without fail. And although my second game starts with something different, all second games always start with the same sequence too (purple "T", orange "L", yellow square, green "Z", red "Z", and so on).
Seems to me like whoever wrote the random number generator used by Tetris did a very poor job. Hopefully EA creates a version 1.1 to fix this, and Apple makes the update available for free to people who already bought Tetris. I find it hard to believe that something so obvious made it past QC.
PowerMac G5 Dual 1.8 Mac OS X (10.4.5) 5G iPod 60GB

Definitely agree about the need for a 1.1 update. The random generator and also the fact that, on my iPod at least, if I am listening to music and playing at the same time, whenever there is a change in tracks, the game locks up for a few seconds and I can't see the piece and it ends up dropping some place unexpected. This desparately needs to be fixed as many a 12th level game has been ruined because of this.

Mail app always starts with the standard account.

iPhone 5s
iOS 7.1.2
Mail app always starts with the standard account.
Can´t it start in the mail overview, where all different mailboxes are shown.
iPhone 4 did it..
Opens in standard account:
Should open in MailBox-Overview: (here just one mailbox)
7.1.2

After some searching I have found a solution. I had to delete the contents of the following folder:
~/Library/Mail/myemailaccount/.OfflineCache/
Note: replace "myemailaccount" with the appropriate folder on your computer that represents your e-mail account. Once I deleted the contents of this folder (there were 2 files), and restarted Mail, there were no problems.
Hope this helps a few people in the future!

Re: Satellite L500 - Error appears if I start recovery disk creator

Hi all, just tried to launch recovery media creator on the Toshiba board and the following ERROR CODE: 0d00f6-49-00000015 appears.
This goes after a few clicks on the mouse and the program starts.
Any ideas how to mend this?
Operating system is Windows 7 64bit my new shinny laptop.
any help would be great.

Do you use this tool for the first time?
This tool will work with factory settings only and nothing should be changed (preinstalled tools or partitions structure).
I am 100% sure it will work properly if you make recovery installations again. The principle how it works is the same on all new Toshiba notebooks and if this works on my brand new Satellite P500-127 and I don't see any reason why it should not works on your Satellite L500. At first start up I have installed Win7 64bit and later successfully created recovery DVDs.
As I wrote before, if possible install OS again using HDD recovery procedure as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
When installation is finished and you start OS for the first time start "Toshiba Recovery Disc Creator".

Satellite C660-1CN - touchpad do not start with Windows

Hi,
I have problem with Toshiba Satellite C660-1CN PSC0QE.
Touchpad don't start with Windows 7 Home Premium.
All drivers are updated.
Bios - lastest.
After log on I need to click *twice* "FN+F9" and after this is OK until next reboot.
I tried:
several Synaptics drivers - no change.
reinstall Windows - no change.
Windows XP mini from Hiren - no working.
BIOS defaults - no change
After I installed "toshiba value added package" I can't turn on touchpad at all.

Hi
Did you notice a difference while external USB mouse is connected or disconnected?
The point is that you can disable the touchpad automatically when external USB pointing device (mouse) is connected to the notebook.
This option can be found in +Control panel -> mouse+
In +control panel -> mouse -> last tab (Device settings)+ you can find all other options related to touchpad

Sequence should always start with 1

Hello,
i am using a sequence in a Mapping. But by starting the mapping the second or 3rd time the sequence did not begin with the value 1 but with the last value + 1 of the sequence in the 1st mapping.
Is it possible to use a sequence so that it always begins with the value 1 everytime you start the mapping?
Regards,
vinzi

I'm not sure I quite understood what you want, lemme get this straight:
U have a sequence named SEQUENCE and you use it in 3 different mappings. When you finish run the first, you want it to restart counting?
If so, then, I'm afraid you'll have to re-deploy the sequence. But you don't have to do it in Control Center.
You may create a stored procedure that creates the sequence using 'EXECUTE IMMEDIATE' facility. Then, use it as a pre mapping process. It would be something like:
-- This one you'd use in the pre-mapping process
create or replace procedure Create_seq as
begin
execute immediate 'create sequence bla bla bla bla';
end;
-- This one you'd use in the post-mapping process
create or replace procedure drop_seq as
begin
execute immediate 'drop sequence bla bla bla bla';
end;
Then, using this procedures in each mapping you want to use the same sequence. That should be enough.
Good luck

Eth0 always starts with rc.d/network start

Here is the relevant bit from my rc.conf
lo="lo 127.0.0.1"
eth0="eth0 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.5"
#eth0="dhcp"
eth1="dhcp"
INTERFACES=(lo !eth0 eth1)
but eth0 always starts. I am using a wireless card on eth1 to connect to the web and eth0 is a builtin NIC - it's really annoying!

dibblethewrecker wrote:um - as you can see from my rc.conf - that isn't gonna work for me!
I saw your "rc.conf". What I'm trying to explain to you is an easy sol'n. You seem to have you integrated NIC disabled anyway. What I offered was what worked for me. Of course, this was before hotplug was being used, so I don't know how that adds into the mix...
I guess your post was more of a "concern as to why this is occuring" than a sol'n. What I meant, in case of confusion was this:
MODULES=(...,<wireless NIC>,<integrated NIC>...)
eth0="dhcp"
eth1="eth1 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.5"
INTERFACES=(lo eth0 !eth1)
I believe that's what gave me a eth0 only interface, with no eth1, and eth0 was my wireless NIC. I don't think you'll have to worry what hotplug is doing that way. I may be wrong...

Openbox always starts with only 1 desktop

can anybody tell me what's wrong with the following rc.xml entry? I always get only 1 available desktop on startup, and then have to use the openbox gui configurator to tick up the number to 5 to enable them (then I tick back down to 4).
<desktops>
<number>4</number>
<firstdesk>1</firstdesk>
<names>
<name>1</name>
<name>2</name>
<name>3</name>
<name>4</name>
</names>
<popupTime>600</popupTime>
</desktops>

When my xml edits don't work as I expect, I always check with xmllint or I use an online xml validator such as this one from w3c: http://validator.w3.org/#validate_by_upload

System always starts fsck's at boot and can't start normally.

First of all, let me say that this forum is awesome. I've just started my first real ArchLinux experiment and you guys have helped me out so much already!
Anyway, my system keeps starting fsck's at boot. It then starts counting to 1 minute and 30 seconds, after which it stops the fsck and drops into into emergency mode. I can only boot by passing the "fsck.mode=force" parameter to the kernel from the boot manager.
I copied what I think are the relevant lines from journalctl:
Oct 28 20:18:33 argon systemd[1]: Starting EFI System Partition Automount.
Oct 28 20:18:33 argon systemd[1]: Set up automount EFI System Partition Automount.
Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-6a7e8bc0\x2d2e45\x2d4915\x2da0df\x2dc2b53783831e.device...
Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device...
Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-4631\x2d3940.device...
Oct 28 20:18:33 argon systemd[1]: Expecting device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device...
Oct 28 20:18:33 argon kernel: EXT4-fs (dm-0): re-mounted. Opts: discard,data=ordered
Oct 28 20:18:33 argon systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
Oct 28 20:18:33 argon systemd[1]: Starting LVM2 PV scan on device 8:18...
Oct 28 20:18:33 argon systemd[1]: Starting LVM2 metadata daemon...
Oct 28 20:18:33 argon systemd[1]: Started LVM2 metadata daemon.
Oct 28 20:18:33 argon systemd[1]: Found device Crucial_CT256MX100SSD1 EFI\x20system\x20partition.
Oct 28 20:18:33 argon systemd[1]: Starting File System Check on /dev/disk/by-uuid/4631-3940...
Oct 28 20:18:33 argon systemd[1]: Starting LVM2 PV scan on device 8:34...
Oct 28 20:18:33 argon lvmetad[221]: Cannot lock lockfile [/run/lvmetad.pid], error was [Resource temporarily unavailable]
Oct 28 20:18:33 argon systemd-fsck[225]: fsck.fat 3.0.26 (2014-03-07)
Oct 28 20:18:33 argon systemd-fsck[225]: /dev/sda2: 176 files, 51065/97280 clusters
Oct 28 20:18:33 argon systemd[1]: Started File System Check on /dev/disk/by-uuid/4631-3940.
Oct 28 20:18:33 argon systemd[1]: Mounting /boot...
Oct 28 20:18:34 argon systemd[1]: Found device /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e.
Oct 28 20:18:34 argon systemd[1]: Starting File System Check on /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e...
Oct 28 20:18:34 argon systemd[1]: Mounted /boot.
Oct 28 20:18:34 argon systemd-fsck[256]: /dev/mapper/SSDGroup-lvolhome: clean, 10177/12976128 files, 3039756/51897344 blocks
Oct 28 20:18:34 argon systemd[1]: Started File System Check on /dev/disk/by-uuid/6a7e8bc0-2e45-4915-a0df-c2b53783831e.
Oct 28 20:18:34 argon systemd[1]: Mounting /home.
Oct 28 20:20:03 argon systemd[1]: Job dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device/start timed out.
Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for /mnt/media.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for Local File Systems.
Oct 28 20:20:03 argon systemd[1]: Triggering OnFailure= dependencies of local-fs.target.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for /var/lib/mpd/music.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/bc7d204d-f19b-4238-a539-ccee44b83a7c.
Oct 28 20:20:03 argon systemd[1]: Job dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device/start timed out.
Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-e784d1a6\x2d648a\x2d423f\x2d9fd2\x2de8b5975672d4.device.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for /backup.
Oct 28 20:20:03 argon systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/e784d1a6-648a-423f-9fd2-e8b5975672d4.
I hope you can help me fix the problem or further diagnose it.

Oct 28 20:20:03 argon systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-bc7d204d\x2df19b\x2d4238\x2da539\x2dccee44b83a7c.device.
It seems there is a problem mounting /home. What device do you mount there; and does that exist when you end up in the rescue-shell?

I can't get Firefox to start with a blank page, which I always managed to do up till 17.0, buy now it always starts with the last page.

I have been using Firefox for several years, and know how to set my Home Page by going to Tools/Options/General, and selecting the appropriate tab.
However, since the last update to 17.0.1, It now always starts as it was when I shut down, including multiple windows if I had them open. It is so irritating that I am considering changing my browser.

Hello sandyn, see [http://kb.mozillazine.org/Preferences_not_saved#Corrupt_or_damaged_prefs.js_file Corrupt or damaged prefs.js file]
thank you

Always starting with a project...

Hi!
When I start GarageBand 10 it always starts up an old project that I´ve saved and closed!
Can I get this to stop and how?
I want it to start the program without choosing any project.
Regards
H

If you hold down the alt/options key while launching Garageband, it will not open a previous project, but present the File Chooser dialog or simply the main menu bar.
Alternately, you can ctrl-click (or right click) the Dock icon and select from the list of recent projects.

Satellite L500-19Z doesn't always go to sleep

I've got a L500-19Z laptop and it's set to 'go to sleep' when I shut the lid.
This generally works OK but occasionally when I close the lid it 'locks up' and when I open the lid the keys don't respond.
The only way out of this is to force a close down and then reboot. Does anyone know what might be the cause of this?
I'm loathe to restore my system if I can help it.
When contacting Toshiba all they can suggest is using the recovery disc and, if that fails, sending it back to be rebuilt.

> The only way out of this is to force a close down and then reboot. Does anyone know what might be the cause of this?
I think its software issue I mean it could be possible that some background processes are running and affect the standby mode.
The guy from Toshiba is right. You should always set the notebook back to factory settings (restore OS using recovery disk or HDD recovery) in order to ensure that there is nothing wrong with hardware.
This should be done at first
So do it and check how the notebook would work!

Satellite L500-1ek - setup system always starts with 800x600

Similar Messages

Maybe you are looking for