Satellite L500 - blank blue screen after login to Win 7

Hi
I have this laptop and i can start up the laptop and it loads fine to the login page i then can login but when the screens opens after login it appears as a blank blue screen with the document folder open i have no background picture and no startup menu nothing else except the document folder.
From there i can access my files etc and anything else internet etc everything but i dont know how to get the screen back to normal.
If i go on background display i can see the image that should be on the background and change it but nothing happens on the full screen.
I have no restore point as yet as new laptop for xmas, i do have backup discs but think its just something to do with the display.
If go into files and folders it shows me the icons on the desktop but all i see is this blank screen.
Any ideas please, if not would restore files work or full back up disc
Thanks very much for any help

Hi
Check this:
Click right on the desktop and choose Personalize.
There you should check the area: Basis design and design with high contrast
Choose Windows 7 basic.
Then reboot the unit.
Usually this should help to get the Windows 7 common design and desktop settings.
But if this will not help then you could use an fast solution which would be a usage of the recovery disk of HDD recovery option.
This would format the HDD and would reinstall everything again

Similar Messages

Blue screen after login and HD and startup disk is full -how to erase data?

Blue screen after login and Hard drive and startup disk is full -How do I get in to erase data?

this user tip might help:
Your Mac needs adequate hard drive space to operate normally. How full can a drive be before it's too full? There is no hard and fast rule that says “X” amount or “%” of free drive space is needed. A low amount of RAM requires more drive space for Virtual Memory’s swap files.
Problems from insufficient RAM and free hard disk space are discussed in this link
http://www.thexlab.com/faqs/lackofram.html
Here’s some general guidelines for minimum hard drive free space:
1. As a general rule, your available space should be 5GB as an absolute minimum as it generally requires that much free space to perform an Archive and Install of Mac OS X and still preserve some free space for VM swap files.
2. Some say that your hard drive should have at least 5% of it's capacity available for use. Still others say 10% to 15%. If you routinely process complex graphics and videos, even more space is required.
Look at these links about freeing up more space.
Where did my disk space go?
_*http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243*_
Download & use WhatSize described in this link or Disk Inventory X @ _*http://www.derlien.com/*_
Freeing space on your Mac OS X startup disk
_*http://www.thexlab.com/faqs/freeingspace.html*_
Amazing Disappearing Drive Space
_*http://www.pinkmutant.com/articles/TigerMisc.html*_
Increase HD Free Space
_*http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html*_
How to free up my disk space
http://www.macmaps.com/diskfull.html
JGG

Completely Blank Blue Screen after Laptop is woken up from Sleep

Initial State: 1) Laptop is ON
2) Laptop is connected by LAN cable to ADSL Modem (BSNL Connection).3) Internet Connection is ON.4) Browser is ON.5) McAfee LiveSafe Internet Security (Antivirus) is ON.6) Skype is ON but not connected or logged on7) Download Accelerator Plus is ON but not in use. Process:1) I leave the laptop on and untouched for 5-10 minutes while I do something else.2) The laptop is in a Sleep State when I come back.3) I press a key or move the mouse to wake it up. Final State:1) I get the initial Windows Page on which I have to click on username to login.2) When I click on it, I do not get the page where I should enter password. Instead, I get a completely blank blue screen with absolutely nothing on it. I have to hard-press the power button for 10 seconds and then switch the laptop back on losing valuable data. Please help.

Hi , Welcome to the HP Forums!
It is a superb place to find answers and suggestions! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I grasp that when you attempt to wake the notebook from sleep by moving the mouse or pressing a key, you are presented with your log on screen. When you click your username and before you enter the password it immediately presents a blue screen and becomes unresponsive. Here are links to two documents I believe will assist you. HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8) HP PCs - Computer Locks Up or Freezes (Windows 8) To say thanks for replying please click the thumbs up button below. If this resolved your difficulty please let other people know the good news by selecting solution provided. This would allow it to be found with greater ease. Best of Luck!

Satellite M50 - Blank screen after login on Win 8.1

Satellite M50 running Win 8.1
After login, get blank screen mouse but nothing else.
Can run Explorer.exe manually via Task manager to get going but some apps such as Acrobat and Windows Mail don't work.
I've searched online and tried all sorts of the suggested fixes to no avail.
Any suggestions gratefully received!

I don't know what is wrong there but you can try to shut down Win8 completely and check repair options. Try with system restore and roll back OS few days back. Maybe this will help.
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

Blank blue screen on login page

I have the Satellite L875D-S7332. For the past few weeks I have had the problem of if the laptop goes into sleep mode, when I click somewhere on page to go from Date/time screen to login/password screen it stays blank and blue. Have to unplug and take out battery to get it restarted and onto regular login screen.

Satellite L875D-S7332 Specifications
Satellite L875D-S7332 Support Page
Try this:
1) Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.)
2) Enter cmd in the search box, and then right-click or press and hold Command Prompt.
3) Tap or click Run as administrator.
Type in the following command and then hit the 'Enter' key:
powercfg -restoredefaultschemes
Let us know what happens. Good luck.
Mike

Can't see desktop with blue screen after login

Hi
we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery.
From application log, we find some error:
Description (Event ID: 1000):
Faulting application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, faulting module msshsq.dll, version 7.0.6002.18255, time stamp 0x4be071d5, exception code 0xc0000005, fault offset
0x000063fd, process id 0x1300, application start time 0x01cf9a43236d46dd.
Description(Event ID: 9009):
The Desktop Window Manager has exited with code (0x40010004)
Description(Event ID: 1530):
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-249263827-1212357926-315576832-391740:
Process 3812 (\Device\HarddiskVolume1\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-249263827-1212357926-315576832-391740

Hi,
In general, event ID 1530 means there are some data in the user profile are still be accessed when the user log
off from the Terminal Server. Please check if any of the data is still remained in the user profile supposed to be deleted. You can use Process Monitor or Process Explorer in order to find the software which is using the data and find the solution. If there
is no such data remained, the Windows have possibly stopped the process and deleted the data when log off. In such a case, you can ignore the Event 1530.
In addition, I recommend running SFC /Scannow from an elevated command prompt and check a dump file for Windows
Explorer under C:\Localdumps.
Besides, you can also download
Autoruns to troubleshooting Explorer issues. Please run Autoruns as Administrator, go to Options menu, Filter, select Hide Microsoft Entries and Ok. After that, open the Explorer tab,
and you will see all DLL that are running inside File Explorer, so start disabling and testing if Explorer crashed.
Furthermore, the KB below may be helpful:
http://support.microsoft.com/kb/961038/en-us
Best regards,
Susie

Blank white screen after login prompt on sharepoint site

Greetings all
We have sharepoint site setup which is running fien since a year now with one WFE web server, db server, ad server
We received a problm recently when we received blank screen after entering login details.
Upon restart of website via IIS it resumed.
I am still finding what are causes and which event log would help to identify errors?

We couldnt schedule this to be on and waited for weekned.
However we again had same incident reported 8 am cst and found that event log has similar warning ( time approx 6 am cst).
Cleared sharepoint timer cache.
started sharepoint timer service again .
still website didnt show contents after authenticating.
stopped website in IIS   mapped to this web application and site contents started showing up.
is there anything else we need to enable in sharepoint logging to find root causes.
We have pending windows updates on server , should that be causing any of these errors?
Log Name:      Application
Source:        Microsoft-SharePoint Products-Web Content Management
Date:          11/7/2014 5:45:04 AM
Event ID:      7362
Task Category: Publishing Cache
Level:         Information
Keywords:
User:          domain\spapppool
Computer:      WFE01
Description:
Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources.
To configure the account use the following command 'stsadm -o setproperty -propertyname portalsuperuseraccount -propertyvalue account -url webappurl'. The account should be any account that has Full Control access to the SharePoint databases but is not
an application pool account.
Additional Data:
Current default super user account: SHAREPOINT\system
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-Web Content Management" Guid="{0119F589-72D7-4EC3-ADF5-1F082061E832}" />
    <EventID>7362</EventID>
    <Version>15</Version>
    <Level>4</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-07T11:45:04.442428600Z" />
    <EventRecordID>319506</EventRecordID>
    <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
    <Execution ProcessID="12700" ThreadID="6472" />
    <Channel>Application</Channel>
    <Computer>WFE01</Computer>
    <Security UserID="S-1-5-21-521425033-3276028114-1354584634-1109" />
</System>
<EventData>
    <Data Name="string0">SHAREPOINT\system</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          11/7/2014 5:45:09 AM
Event ID:      7043
Task Category: Web Controls
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      WFE01
Description:
Load control template file /_controltemplates/15/ExcelWebRenderer.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>7043</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>15</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-07T11:45:09.590620500Z" />
    <EventRecordID>319507</EventRecordID>
    <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
    <Execution ProcessID="12700" ThreadID="6472" />
    <Channel>Application</Channel>
    <Computer>WFE01</Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0">Load control template file /_controltemplates/15/ExcelWebRenderer.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          11/7/2014 5:45:11 AM
Event ID:      7043
Task Category: Web Controls
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      WFE01
Description:
Load control template file /_controltemplates/15/SlicerRendererControl.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>7043</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>15</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-07T11:45:11.384687300Z" />
    <EventRecordID>319510</EventRecordID>
    <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
    <Execution ProcessID="12700" ThreadID="6472" />
    <Channel>Application</Channel>
    <Computer>wFE01</Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0">Load control template file /_controltemplates/15/SlicerRendererControl.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.</Data>
</EventData>
</Event>
Can you browse the below URLs
http://sharepointfordummies.blogspot.in/2013/06/event-id-7362-super-user-account.html
http://social.technet.microsoft.com/wiki/contents/articles/20699.sharepoint-2010-event-id-7362-the-super-user-account-utilized-by-the-cache-is-not-configured.aspx
Thanks and Regards Rahul Dagar

Satellite L455D-S5976 - blue screen after BIOS update

fan wasnt operating properly causing overheat so updated bios,
see here
[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67086&tstart=0]
and now i am blue screening (it flashes extremely quickly) just as the windows xp screen on booting appears. keeps doing over and over, please help.
*edit,*
incidentally as the bios started updating the fan immediately picked up speed. strange.
Message was edited by: toshibauser_2

So you are not able to access BIOS???
Press F2 immediately (press it many times in the row) after notebook has been power on
But if you are not able to access the BIOS, I assume that there is a serious problem with BIOS/hardware possibly something went wrong during the updatebut usually this should not happen and its sounds strange
However, I think in such case just an ASP technician would help you.

Blank Blue Screen After Log In

Hello ladies and gents...ill describe the problem im having and how it occured.
I was browsing the web and playing music when my Powerbook G4 froze suddenly. I did the usual and restarted it. After the loading bar that says "Starting MAc OSX" appeared and fully loaded it went to the normal blue screen that appears when loading the whole desktop and dock...however nothing appeared and it just stayed there. I could still move the mouse around but thats it. I restarted again and was taken to a black screen and DARWIN appeared i put in my username and password and then it said "Welcome To Darwin". I let the powerbook sit for like 2 minutes and it went back to the Blue screen again, nothing loaded. Im basically at a standstill on what to do. I Do not have the installation CD's that came with my powerbook and I dont know what 2 do.
Anyone know a solution to the problem??????
And another thing, if its some sort of harware failure is there a way i can get my programs and digital design work onto an external harddrive i realllyyyy cant afford to lose that stuff.
Help is greatly appreciated.

See if this works...
Might try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (nameofvolume) appears to be OK  
If fsck found issues and has altered, repaired, or fixed anything, it will display this message: 
*** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214

Blank blue screen no login

When I start up my mac, it goes to the blue screen and never shows the login window. In verbose mode the screen flashes from blue to black displaying:
: Login Window Application Started
but never actually gets there! I've tried trashing my NetInfo but that hasn't seemed to work. Obviously I am working in Single-User mode to do this. Any suggestions, ways of trashing netinfo, ways to login!?!?

When I run the DU/fsck it always appears to be OK. But still no startup.
When I run sh /etc/rc
it all runs fine and then reports the following
: Couldn't read user-specified Computer Name; using default bMacintosh-000A957A2170b instead
: Couldn't read user-specified local hostname; using default bMacintosh-000A957A2170.localb instead
localhost /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: (-1) Cannot use ATS Persistent Store - switching to old FODB cache code
Workaround Bonjour: Unknown error: 0
Message was edited by: Andrea Sian

Function button on Satellite L500 causes Blue Screen Of Death

Ok I have an Satellite L500 and I got it back in December 2009. Ever since I first got it, if I ever press the function button the BSOD appears and the computer restarts. I dont particularly use the function button often, but its just in case I press the wrong button and its a nice feeling not to have a laptop-suicide button haunting my keyboard.
Also if I decide to shut down the laptop completely, and turn it back on at a later time, its likely that it will appear then as well. I have no clue as to why this is but any help would be appreciated.
Thanks a lot
A. Mcstea

Hi buddy,
And what operating system do you use? Does it happen with preinstalled Windows from Toshiba recovery disk?

Dual 7916's showing blank blue screen after 30 mins. uptime

Have any of you had this experience before? I have a 7975 series phone with dual 7916's expansion modules; The phone and the expansion modules boot-up fine but after 30 mins or more of idle time, the expansion modules display screen is Blue with no programing.This setup is working fine on other phones but is an issue on two 7975's right now. I have deleted and re-added the problem phones in CUCM 9.1 replace, ALL hardware (i.e. phone, pwr cube, expansion modules etc.) and swapped all network components. See the following Specs. below:
CUCM 9.1
7975 firmware SCCP75.9-3-1SR1-1S
7916 firmware B016-1-0-4-2

Hi Richard,
Just covering all steps here but are the expansion modules selected within the phone configuration within CUCM? On the physical phone itself, if you press the settings button and select Status, then Expansion Modules what do you see? May have to upgrade the firmware of the 7916's.
Hope this helps
Tony
Please rate helpful posts

My OS X is die ?? Blank blue Screen at start up.....

one day in the middle of use my Macbook Pro all the suddenly the screen all get scremble. and the machine just hang can't even reboot.
SO i takeoff the battery to reboot, but now all i get is a blank blue screen after the Apple Logo.
i try boot in safe mode.
i go as far as the login screen after login then just OS x10.5 default wallpaper and nothing etc ?
so how can i make my macbook work again ?
i really don't want to reinstall the OS as the comp also get another bootcamp partition.
so any suggestion ?
thx

True, everyone should but not everyone does. Some people, newcomers especially, have the naive idea that when they spend a lot of money on something it should work, so they don't worry that any day could be their computers last. I guess we all have to go through something like this so we learn the lesson. I hope that in the future he'll just get an inexpensive usb drive and use time machine if he wants. It works pretty well.
In the meantime we have to get him going again with the least criticism applied. The page I referenced is nonjudgemental and, I thought, contained the advice you gave him in a somewhat neater format.
Peace, and thanks for helping a fellow Macintosher

SAP BPC 10.0 Web Client Blank Screen after login

Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
Hery

Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery

Another blank blue screen at startup issue

Can anyone shed some light on this?
The iMac was operating fine up until a few nights ago. I had been using the machine all day without a hitch then in the evening tried switching to another user account and the system hung up stuck with the spinning pinwheel before login. I forced a reboot and got the blank blue screen.
I did all the recommendations I've seen posted here before. Repair Permissions and Disk Repair from the Install Disc (neither of which returned any issues) I rebooted in Safe Mode which runs fine but after rebooting I had the same problem. I booted Safe Mode again and tried making new accounts, that wasn't any help. I then went into single user mode to wipe out the preferences and netinfo database. No luck. reset SMU, reset PRAM, reset NVRAM, unplugged all external devices and pulled out the 3rd party RAM (bought it in 2005 from Crucial when I bought the iMac). No Go.
I reinstalled OSX using the Archive feature and that didn't fix things. Then I reinstalled OSX and let it wipe the entire HD clean after using Safe Mode to back-up my essentials onto external USB HD first. Even the clean install didn't help. It certainly runs a lot more zippy but it only runs in Safe Mode.
I ran the extended hardware tests from the Install CD/DVD and everything passed OK.
Now, there is one issue I can't solve myself and I have to wonder if this may be the cause of the problems, even though hardware tests don't reveal any problems. When I opened the case to pull the RAM, I noticed two capacitors on the logic board that had leaked, however the leaks are all dried up and crusty, not wet like a recent leak. Here's a photo:
http://www.mikepipes.com/sketchbook/imac-1.jpg
Is there anything I may have missed?
Now I have seen the other posts regarding the repair programs Apple has for certain model of iMac, and my serial number does fall within the range (QP519XXXXXX), however this is a 2nd generation iMac and the page states that only 1st gen iMacs are elligible. Wonder if the photo of the leaky caps could sway them to make an exception?
I'm trying to get as far as I can through troubleshooting because the closest Apple Store or Apple tech is 3 hours away.

Present you case to Apple. If you don't get anywhere w/them then ask to be transferred (or call them yourself) to Customer Relations - 1-800-767-2775.
Otherwise, you will have no alternative but to take your computer to your local AASP.
If you have AppleCare, you can have the repair tech come to your home (under certain conditions). Read the small print in the AC booklet.
You can also check AASP or AASP's Outside of the USA to find a repair shop closer to you.
*PS Thank you for providing detailed info about your troubleshooting efforts. It was a great help.*

Satellite L500 - blank blue screen after login to Win 7

Similar Messages

Maybe you are looking for