Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

Hi,
I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
Any suggestions?

Hi
Did you try different disks from different manufactures?
How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

Similar Messages

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Hello,
I am sorry for bad English.
Satellite A300.
Conducted updating to Win7 on the program Toshiba Upgrade.
Does this program work;
TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
The program TRDCReminder did not find "Renewal of computer".
On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
If is not it these programm how to recover computer in the case of failure?
Does Tempro work in Win7?
Many thanks.
With kind regards.
Igor.

Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
My problem:
I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
" Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
error details:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: TRORDCLauncher.exe
Wersja aplikacji: 1.0.0.1
Sygnatura czasowa aplikacji: 4682674e
Nazwa modu?u z b??dem: WIMGAPI.DLL
Wersja modu?u z b??dem: 6.0.6001.18000
Sygnatura czasowa modu?u z b??dem: 4791a7a6
Kod wyj?tku: c0000135
Przesuni?cie wyj?tku: 00009cac
Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
Identyfikator ustawie? regionalnych: 1045
Dodatkowe informacje 1: 9d13
Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Dodatkowe informacje 3: 9d13
Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Przeczytaj nasze zasady zachowania poufno?ci informacji:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

Hi
Did you change anything on your notebook?
I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
This would lead to a new window and there you could choose Toshiba HDD recovery.
But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

Satellite L500D: 64bit Win recovery disc is 32-bit - can I restore 64 bit?

Hi all,
I have a Satellite L500D, which has Windows 7 Home Premium, 64-bit.
The recovery CD I have is only 32-bit, however, and I need to reinstall Windows.
I'm assuming this disk can only install the 32-bit version, and doesn't give you the option - so after it is installed, is there still a partition on the HDD for the 64-bit version?
If possible I would like to still use the 64-bit edition.
Thanks!

Please be careful with this.
Before you want to use recovery DVD you must create 64bit recovery disc version using preinstalled Toshiba recovery disc creator.
Many Toshiba notebooks are delivered with:
-preinstalled Win7 64bit version (recovery disc is not in package)
-additional 32bit version as recovery disc.
Im not 100% sure but I think that after 32bit version you may not have access to 64bit recovery image saved on HDD. Please create 64bit recovery disc before you change anything.
After doing this you will be sure that you can install 64bit using created discs.

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

NB200-10Z: Can't make recovery disk using TOSHIBA Recovery Disc Creator

Hi Folks,
I finally got round to buying a USB DVD drive in order to create recovery discs for my NB200-10Z. I got the following:
* Samsung SE-S084C, External USB 2.0 Slimline 8X DVD Writer, Black
I have twice tried to create a recovery disc and am now left with two trashed DVDs. The error codes in the error window are:
Error Code: 0E01B5-26-2A040803
Error code: 02016F-3C-00000000
The first time the burning was stopped, the second time the verify failed.
Can anyone shed light on this?

*Short version:*
Thank you to everybody who replied.
I decided to try out the USB DVD drive on another laptop to perform a HDD backup operation...and it failed as well. Grrrr. Same DVD media (I just hadn't got round to getting new media to try).
I think I shall discount the possiblility of the NB200 being at fault, and therefore shall consider this question answered on this forum.
*Long version:*
Well, I ended up using Virtual CD to "burn" an ISO file to HDD, and then copied that to another laptop to burn to DVD (not using the USB DVD drive, but the same DVD media type). Being the curious type I decided to perform a restore using the USB DVD drive. It got part way through installation then informs me that a CRC check had failed...argggg.
So, to cut a long story even shorter, I ended up slipstreaming the Intel storage drivers into a Win XP ISO (created from a Win XP CD I had from another previous laptop) and creating a bootable USB drive. Now I have a clean install with all the NB200 driver installed. Phew.
Actually, to think a bit more about it, I could have attempted to put the Toshiba recovery ISO onto the bootable USB drive, but I've done the clean install now anyway.
For whatever reason, I had such trouble getting the NB200 BIOS to recognise the USB DVD drive in order to change the boot order (it wasn't in the option list). This was with the DVD in the tray, and without the DVD in the tray. Some investigation required on my part, I think, to determine exactly what is going on.

Java does not run correctly

My school has a server which I think is UNIX and it runs something called IRIX. We compile our programs on there but it takes so long I usually compile on the PC with J2SE. The only problem is when I run the programs, they don't execute correctly while when I run it on the school server it does run correctly. Do you know what might be causing this problem? It compiles correctly on both sides.
If I need to ask the user for two things, I'll prompt for the first, then the second. But when I run it on the windows PC, it'll skip the first prompt and jump to the second.

Yes, the program executes correctly on Unix but not on PC. This is a homework assignment so I can't post it until I turn it in (tomorrow). It's very basic - since I'm taking an intro-Java course - and I'm doing this all by hand-typed text and the program runs with just text-displays and no graphical boxes.

Program does not run correctly

I purchased 2 CS6 programs for our charity via the CTX project
one version runs perfectly the other one does not and never has.
The problem is that it works for the first 6-10 images but then crashes and will not come back until you close down the computer.
Or when you open images in the RAW window where the image should be there is no image and you can see the background through the gap.
I have tried re-downloading the program again via [email protected], but it will not recognize my signin password, and no password email comes to our email.
I have a license key in the email we originally were sent by adobe but I cannot get to the point where I can use it
I know we got this at a charitable rate but it is absolutely useless
What can I do

download the installation file(s) and re-install. if you need more help, indicate what adobe program(s) are problematic
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.4 (win) 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Ran firefox update and now firefox does not run correctly.

I ran the latest firefox update 9Firefox Setup Stub 33.0). Now when I start firefox the browser opens and inside of it is black. I cannot see anything to use the browser. I have uninstalled and reinstalled with no luck. I have also restarted my computer. I have taken a screen shot of what it looks like.

Currently in version 33, Firefox has implemented a new, faster way of loading webpages. This new feature is called OMTC. However, there are still some tweaks Mozilla developers are making to this.
There is a known issue that Mozilla works on very hard to fix: if you are experiencing black webpages on some sites, here's what you can do to avoid the problem in the meantime:
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
To disable Hardware Acceleration
* Click the menu button [[Image:New Fx Menu]] and select ''Options''.
* In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
* In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
Now, exit Firefox, wait a few seconds, and then start it normally.
Please let us know if this solves the problem. Engineering is also gathering more information about the issue would request that you fill out [http://www.surveygizmo.com/s3/1851506/1c87a6cf309a this survey]
I should also mention that other users with this problem had an embedded intel hd graphics card with an old driver present. Until Mozilla comes up with a fix, if you want Hardware Acceleration in Firefox, you can try to update your driver through the appropriate link below to see if that helps:
Intel HD 2000/3000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23763
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764
Intel HD 4000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24328
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329
Thank you!

Software Update under Lion Does not run correctly

Hello
Since few days i can't have a software update check successful on my Lion 10.7
Here is the log :
24/08/12 00:19:10,566 com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [23167] for authorization created by '/System/Library/CoreServices/Software Update.app' [23163]
24/08/12 00:19:10,566 com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [23167] for authorization created by '/System/Library/CoreServices/Software Update.app' [23163]
24/08/12 00:19:11,467 Software Update: SoftwareUpdate Scan: Error Domain=NSURLErrorDomain Code=-1003 "Aucun serveur ayant le nom d’hôte précisé n’a pas pu être trouvé." UserInfo=0x10fc75000 {NSUnderlyingError=0x10fc78d10 "Aucun serveur ayant le nom d’hôte précisé n’a pas pu être trouvé.", NSErrorFailingURLStringKey=http://serveur:4080/nonauth/deny.php?dest=aHR0cDovL3N3c2Nhbi5hcHBsZS5jb20vY29udG VudC9jYXRhbG9ncy9vdGhlcnMvaW5kZXgtbGlvbi1zbm93bGVvcGFyZC1sZW9wYXJkLm1lcmdlZC0xLn N1Y2F0YWxvZw==&ID=MTQgOA==&DBL=, NSErrorFailingURLKey=http://serveur:4080/nonauth/deny.php?dest=aHR0cDovL3N3c2Nhbi5hcHBsZS5jb20vY29udG VudC9jYXRhbG9ncy9vdGhlcnMvaW5kZXgtbGlvbi1zbm93bGVvcGFyZC1sZW9wYXJkLm1lcmdlZC0xLn N1Y2F0YWxvZw==&ID=MTQgOA==&DBL=, NSLocalizedDescription=Aucun serveur ayant le nom d’hôte précisé n’a pas pu être trouvé.}
How can I fix the authorization ?
Thanks

Hello
I'm still having this issue on my iMac AND on my macbooc pro
Anyone to help me fixing it ?
Thanks

Youtube does not run correctly in my mac book pro (mid 2010)

sometimes the play/stop bottom in youtube doesnt work or it appears the charging wheel in the video. help please

What type of DVDs are you trying to burn?
What are you trying to burn? As far as I know, iTunes only burn music CDs. Check iTunes CD settings in Preferences>General
For DVD settings go to System Preferences>CDs & DVDs

Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Hi,
I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
Thanks for your help.

It is big problem now if the Toshiba tool cannot find the files.
How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
Check it out please.
What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

Toshiba NB200-10z - recovery disc creator.lnk isn't available

Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I fix it?

Since this is an English language forum you should post the message in English language.
I assume you are not able to start the Recovery disk creator software
Why?? Who knows.
Try to recover the notebook using HDD recovery option:
Press F8, choose Repair my Computer, and HDD recovery.
If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

Recovery media creator: "Can not get Disk driver information. No HDD Recovery area!...

The Toshiba Recovery Media Creator can not be launched."
That´s the final part of the message I receive when I try to make the system image.
As you can see (image below), this recovery partition exists, I haven´t deleted nor modified it in any way, and besides it´s in good state. I don´t understand why I get this error message. What can I do to get this recovery partition recognized by the application. I really need to make a system image.
Please, if somebody has any idea of how to fix this thing, I´d really appreciate your help.
Thanks in advanced.
Will
Solved!
Go to Solution.

Will, I'm afraid you'll need to order recovery discs and restore the hard disk to its original out-of-the-box contents using them.
Order Toshiba Recovery Media
BTW, the 1.46 GB partition you're looking at is not the recovery partition. It contains the Windows Recovery Environment.
-Jerry

Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

Similar Messages

Maybe you are looking for