Satellite L505-10K - Unexpected error when using recovery disk creator

Toshiba Satellite L505-10k
Can't make any recovery disc when I open toshiba recovery media creator, it says: an unexpected error occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then it comes again and then I click ok and it comes again and I click ok and then the program comes and when I create the disc it comes to the verification, but then it says: Unable to read the following file. E: \ Boot \ fonts \ chs_boot.ttf (error code: 02015-20-00000000).
I really do need help, I'm afraid something will happen to my computer, so is there anyone who knows something about this kind of problem?
Thankful for your help.

Hi
I don't now if that works be cause when I got my computer I tried to create an recovery disc but it says yeah, you know, and I was looking in the folder if the file was there as it says that it could not read but the file isn't there so I don't think that it works to do an recovery from the HDD but I know that I can order an recovery disc from toshiba but I don't know if it works to do an recovery with it du you think so? but if I order an recovery disc do you think that I can get it for my language? I'm from sweden.

Similar Messages

Satellite A660-13Q - Error when opening recovery media creator

My problem is that: When I try to open the TOSHIBA Recovery Media Creator application gives me the next error: "CAN NOT get information from the disk controller" with the options Accept or Cancel, when Accept then gives the next error --> "there has been an unexpected error. out of this application and restart it. Error code: 0d00f6-49-00000001" then accept next error "there has been an unexpected error. out of this application and restart it. Error code: 0D0172-49-00000001" Then accept, the application open correctly.
Please, I need a solucion of the errors, Thanks.

Hey,
I dont know what to say but fact is you cant start Toshiba recovery disk creator there is not much what you can do because you cant download this program on official Toshiba website.
In your case I would try to recover your notebook to factory settings using HDD recovery option:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
After this create the recovery disk again before you install any new software or something else.
I could also imagine that you installed another program that blocks recovery disk creator but its hard to say about this so try HDD recovery and see what happens.

Error when using recovery

I get error when i try recovery my pc
Recovery manager could not restore your computer using the factori image.
Please contact HP support. Error Code: 0xe0ef0003
Model- Hp G62 Notebook pc
Product number- XF287EA#ABU
System-Windows 7 32bit
Please help me and i start computer i get message:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
And i cant use the computer later i try to buy new Windows 7 CD but i cant Boot bios and i cant run windows cd.

Hi there
now you need to run the test on the HDD to make sure that your HDD work fine
Here is The link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&lc...=
Good Luck
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Runtime Error When Using Recovery CDs

Hi. I had a HDD failure on this notebook. I got a SSD to replace it with (on my own) and got the recovery DVDs from HP. After 3 hours of trying to install the recovery DVDs to the SSD only to have it fail in the last seconds because it couldn't write a "Yes" to some config file, I found a 640GB HDD to try and recover the DVDs to. Now after booting very slowly into the recovery disks, I get a
Runtime Error!
Program: x:\RITA-TOOL\Reducer.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
Any help is appreciated!
This question was solved.
View Solution.

I will ask to have your issue escalated.
Done!
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Satellite A300 - I can't find the recovery disk creator

Hi everybody!
Need some help with my Satellite A300. I lost the optical recovery disc I burned when the laptop was new. Now when I'm trying to burn a new recovery disc I can't find the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the recovery files left - a folder named HDDRecovery with size 4.5 GB. The problem is to find out how to burn the disc.
Can anyone help?
//iMate, Sweden

Hello
F8 will works just if you didnt change anything with first partition and if you still use factory settings.
"Toshiba Recovery Disc Creator" cannot be gone for no reason. Either you have removed it from the system or you have installed own Vista OS.
I don't want to speculate why you cannot use F8 anymore but fact is that for new Vista installation you need recovery DVD.
You can order one under https://backupmedia.toshiba.eu/landing.aspx

"Final Cut Pro generated an error or unexpectedly" Error when using Qmaster

Hello all I have Final Cut Studio 3. I am using the latest Final Cut and the latest compressor.
I have a Core i7 so i am trying to use all 8 virtual threads or at least four. However when I use the "This Computer" option in compressor it is not an issue. It will compress fine. However, when i use the virtual cluster i set up with QMaster i get the dreaded "Final Cut Pro generated an error or unexpectedly" and it fails. I am unsure what to do. Here are the circumstances:
When I to compressor from FCP and use "this computer" it is no problem.
When I send to compressor from FCP and try to use your personalized cluster (taking advantage of those expensive cores!) it won't work. it fails and give me the aforementioned error.
I have enclosed a video which can be seen at:
http://www.youtube.com/watch?v=ZyKsw8ii5Ig
PS I know that I can make the file quick time self contained, but this program should work on it own.

Virtual Clustering works by launching multiple copies of the Compressor encoder, each of which needs access to the source media that you are compressing. This is fine if you are compressing from a source movie clip, as they can just open the file multiple times.
But when you export from Final Cut Pro, FCP can only communicate with one copy of the encoder - it cannot launch multiple copies of itself. *Consequently, you cannot export to a virtual cluster from the Send to Compressor command.*
A common misconception is that exporting to a QuickTime movie is slower. This is wrong - it is actually faster for two reasons - 1) it is faster to read the file directly than to request each frame from FCP and 2) you have access to virtual clustering. If your timeline is completely or partially rendered, deselect Make Self-Contained and the QuickTime export will be quicker.
Another issue is that you are using up all of your virtual cores, leaving nothing left over for the operating system. There are varying schools of thought on how many to choose, ranging from the total number of cores minus one to half the number of cores (the latter being Apple's official suggestion). Also remember that each instance requires at least 1 GB of RAM, and remember to leave some extra for the OS and running applications.

Unexpected error when using appendChild() in SDK 3.4 and above

I'm using an API class to build XML objects within AS3 and passing them as a String (of well-formed XML) to a Web service. This class has worked just fine in Flex 3.0:
public class MyXMLClass
private var message:XML = <root></root>;
public function MyXMLClass()
message.appendChild(<arguments></arguments>);
public function setArgument(name:String):void
message.arguments[0].appendChild("<argument name=\"" + name +"\"></argument>");
public function setArgumentValue(name:String,value:String):void
message.arguments[0].argument.(@name == name).appendChild("<value>" + value + "</value>");
public function getMessage():XML
return message;
//Take the result of getMessage().toXMLString() and pass that into the Web service as a String.
But now that I am running Flash Builder whether I compile with 3.4 or 4.0 SDK I get:
Error #1086: The appendChild method only works on lists containing one item.
The line of code it chokes on is the setArgumentValue function.

Yeah that was it Alex. The following code change worked:
public function setArgument(name:String):void
message.arguments[0].appendChild(<argument name={ name }></argument>);
public function setArgumentValue(name:String,value:String):void
message.arguments[0].argument.(@name == name).appendChild(<value>{ value }</value>);
This now works in SDK 3.4. Unfortunately SDK 4.0 (Adobe Forums: Discrepancy in XML between Flex 3.4 and...) breaks all my XML but at least I can cross this one off. Thanks.
11/15/09: Glad to report having found a workaround for the other issue mentioned above.

Unexpected error when trying to sign in to sync

Version 32.0.3 installed. I've been getting a message that Firefox unable to sync for the last **days So when i tried to log out of sync and log back in. I get an error "unexpected error" when i try to log in. So i tried to create a new account and get the same issue from the log in page. Have looked at everything listed on troubleshooting sync page Still the same issue.

HI mfackler,
That usually means something has gone wrong. If you have already tried to sign out and back in in accounts.firefox.com please provide the following troubleshooting information for further investigation:
* How do I turn on sync logs:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Please also use pastebin.mozilla.org for sharring any errors that relate to this issue.
Thank you.

Unexpected Error When Creating Network

Running 10.9.1 and getting "Unexpected Error" When Creating a new network. Need help getting started.
Thanks for the support!

You need to use the alternatives under options..
It will never pick this option itself.. so click Other Options.
and use replace an existing device.
Or simply remove the existing setup and start over..
Reset to factory every time you start a setup.. and create a new network.. then reset the older units once this is working and use them to extend the network.
Personally I prefer to replace and start afresh as it just leads to less issues.
As far as range is concerned the new AC models are variously reported as excellent to worse than existing old models.. wireless is simply another form of voodoo only in white plastic instead of black.. which sort of suits the black arts better.

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

Java Heap Error when using Stateless Session Timer Bean deployed in Oracle

Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, Vidyadhar

Hi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
     at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
     at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     ... 9 more
Any idea?
Thx Auro

I am getting an unexpected error when trying to install iCloud on my PC

I am trying to install iCloud on my PC and new iPhone 4S, but when my PC says there is an "unexpected error" when installing.

Hi UniversityDesigner,
Welcome to the Community!
Please go through this thread: http://forums.adobe.com/message/5581753#5581753
Thanks!
Ankit

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

Satellite L505-10K - Unexpected error when using recovery disk creator

Similar Messages

Maybe you are looking for