Satellite L505-13X - Doesn't start at the first time

my laptop does not start at the first time I turn and I put it out several times that it starts

Hello
> thanks you my friend but my problem has not been answered yet. because i have more than one laptop and all have the same problem
For me it sounds like a software problem.
I mean if you have installed XP, nobody knows which drivers you have installed and applications. Everything could cause this issue and in this case you have to search for a solution yourself.
If you install the OS from Toshiba recovery disk and everything works properly, its not a hardware malfunction and not an issue of Toshiba.

Similar Messages

ITunes doesn't open after the first time

Hi, my iTunes after the last upgrading doesn't open. Really it open the first time after starting pc then , when i shut down it seems frozen. Could you help me? Do you ave a solution?

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

Making a flash movie delay before starting for the first time

Flash noob here. I've currently got a little bit of
actionscript in my flash movie which makes it loop a couple times,
and then pause, before looping over again, and then pausing again,
and wash-rinse-repeat, which is fine.
But now what I also need is to add a small bit of code
(preferably on the first frame) which allows me to set a delay
time, that the movie will just appear to be paused, but it should
ONLY do this the first time. Every other time, the movie should
loop like it does normally.
The reason is because I've got about 3 movies on my page,
when one stops moving, I want a 2nd one to start, then when that
one stops, the 3nd will start, and when the third one stops, the
1irst one will start again, etc. so I have to time it just
right.

If it might help, here's the code I have so far. The movie
has 17 frames. But that shouldn't matter, I was going to just go by
the loop count, and try to even them up that way.
frame 1
function pause(){
play();
clearInterval(timer);
loopCount=0;
frame 16
if (!loopCount) {
var loopCount:Number = 0;
loopCount++;
if (loopCount < 5) {
this.gotoAndPlay(1);
} else {
this.gotoAndPlay(17);
frame 17
stop(); // 60000 = 1 minute
timer = setInterval(pause, 10000);

HT2500 mail starts like the first time asking to configure account

After restarting mya mac book when it froze ... I opened Mail and started as if I was using it for the first time, asking to configure email accounts.
Is there a way to get back all my accounts and emails?

Check & see how many Users accounts are in the Users folder at root of the drive, perhaps your home folder got renamed?
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854

IPad 2 starting for the first time without itunes ?

Hello everyone,
I just bought an iPad 2 for my brother in India. :-). A brand new iPad 2 in a white box from best buy. I have couple of questions and hope the forum members would help. Thank you.
1. As i unboxed , i pressed the Home button, and the iPad screen didn't show the connect to itunes logo,instead led me thru' a series of steps like registering for itunes/apple password and it just started on its own. It works fine though ,however i found this to be weird to start without connecting to itunes. Is this considered "normal" for recent iPad 2's to start without itunes ?.
2. What kind of travel adapter would you suggest for use in India /240V ?. I was suggested to purchase a world adapter kit from apple store for $39.00 ,but i would use only one adapter and the rest wouldn't be of any use ? Could you suggest an adapter to use in India ?

Sunnyr wrote:
Thank you. My question is about starting iPad 2 for the first time without connecting to iTunes ?
As of iOS 5, it is quite feasible to start up, configure and use an iPad without connecting to iTunes. My New IPad has NEVER been synched to a computer.

Cannot Start Up the First Time!

i bought my Mac Mini today and hurrired home to setup. To my disappointment, it didn't work the first time i turned on my Mac Mini. It kept stuck in a screen with a diagram i can't understand what it means. Can anyone help me? I have captured the screen in the following:
http://gallery.me.com/espl#100289
Help very much appreciated
Message was edited by: rkfchong

Yes. OSX is telling you to either connect a USB mouse, or power on your wireless mouse.

...gnome doesn't start after the first screen..

Dear all,
I am in difficult because I have installed Gnome ant it doesn't work.
When I launch gnome-session from .xinitrc "..exec gnome-session", the foot of gnome 2.6 appears, but it finishes to work with the clock of the mouse switch-on.
I attached the log at the end of this page.
Onother problem.
Is it correct my hosts configuration?
If i change it, xfce4 doesn't work correctly (keyboard doesn't work under firefox....).
Please, help me.
Thanks.
Luca.
hosts.
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
# 127.0.0.1 localhost.localdomain localhost
192.168.1.37 localhost.localdomain localhost
# 192.168.1.37 luca1
# End of file
log
XFree86 Version 4.4.0
Release Date: 29 February 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.4 i686 [ELF]
Current Operating System: Linux Luca1 2.6.5 #1 SMP Mon Apr 5 01:03:13 PDT 2004 i686
Build Date: 01 April 2004
Changelog Date: 29 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 23 13:16:10 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "laptop"
(**) | |-->Device "ATI Radeon 9000"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0646 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:3: chip 1039,7007 card 1584,7007 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1584,4003 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1584,5203 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1584,7002 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1584,5002 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 1217,6972 card 4001,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 01:00:0: chip 1002,4c66 card 1584,2302 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd7e00000 - 0xd7efffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc7c00000 - 0xd7cfffff (0x10100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:8:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x20800000 - 0x20bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20400000 - 0x207fffff (0x400000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] rev 1, Mem @ 0xc8000000/27, 0xd7ef0000/16, I/O @ 0xa800/8, BIOS @ 0xd7ec0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xdc000000 from 0xdfffffff to 0xdbffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project & After X-TT Project"
compiled for 4.4.0, module version = 1.4.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 6.5.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Radeon Mobility 9000 (M9) Lf (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[23] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[24] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[26] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[27] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xd7ef0000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = 0x4c66)
(--) RADEON(0): Linear framebuffer at 0xc8000000
(--) RADEON(0): BIOS at 0xd7ec0000
(--) RADEON(0): VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Non-DDC laptop panel detected
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Displays Detected: Monitor1--Type 2, Monitor2--Type 0
(II) RADEON(0):
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: Samsung LTN150P1-L02
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1400x1050
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1400x1050" 108.00 1400 34208 34320 1688 1050 1050 1053 1063
(**) RADEON(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1280x1024" 108.00 1280 34208 34320 1688 1024 1050 1053 1063
(**) RADEON(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1024x768" 108.00 1024 34208 34320 1688 768 1050 1053 1063
(**) RADEON(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "800x600" 108.00 800 34208 34320 1688 600 1050 1053 1063
(**) RADEON(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x350" 108.00 640 34208 34320 1688 350 1050 1053 1063
(**) RADEON(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x400" 108.00 640 34208 34320 1688 400 1050 1053 1063
(**) RADEON(0): Default mode "720x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "720x400" 108.00 720 34208 34320 1688 400 1050 1053 1063
(**) RADEON(0): Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x480" 108.00 640 34208 34320 1688 480 1050 1053 1063
(**) RADEON(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 34208 34320 1688 864 1050 1053 1063
(**) RADEON(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 34208 34320 1688 960 1050 1053 1063
(**) RADEON(0): Default mode "832x624": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "832x624" 108.00 832 34208 34320 1688 624 1050 1053 1063
(**) RADEON(0): Default mode "1152x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1152x768" 108.00 1152 34208 34320 1688 768 1050 1053 1063
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(**) RADEON(0): Using AGP 4x mode
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[8] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[9] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[10] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[11] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[12] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[13] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[14] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[15] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[20] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[24] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[26] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[27] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[28] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[29] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe08a7000
(II) RADEON(0): [drm] mapped SAREA 0xe08a7000 to 0x44258000
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0646; Card 0x1002/0x4c66]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xdc000000
(II) RADEON(0): [agp] Ring mapped at 0x4425a000
(II) RADEON(0): [agp] ring read ptr handle = 0xdc101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x4435b000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xdc102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4435c000
(II) RADEON(0): [agp] GART texture map handle = 0xdc302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x4455c000
(II) RADEON(0): [drm] register handle = 0xd7ef0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Will use back buffer at offset 0x11b0000
(II) RADEON(0): Will use depth buffer at offset 0x1754000
(II) RADEON(0): Will use 35840 kb for textures at offset 0x1d00000
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7136
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ChordMiddle"
(**) Mouse1: ChordMiddle
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "Resolution" "256"
(**) Mouse1: Resolution: 256
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xe08a7000 at 0x44258000

...I have tried to launch gnome-session under xfce4 WM.
It starts but stop it after the first charging with this warning:
Host name lookup failure on local host.
In addition, it give me:
Si è verificato un errore durante l'avvio del demome delle impostazioni di GNOME.
Alcuni aspetti come temi, suoni o impostazioni dello sfondo potrebbero non funzionare correttamente.
Il demone delle impostazioni è stato riavviato troppe volte.
L'ultimo messaggio di errore è stato:
Child process did not give an error message, unknown failure occurred
GNOME tenterà di riavviare il demone delle impostazioni al prossimo login.
sorry if it is in italian.
Ciao.
Luca.

I Chat will not start for the first time on my Macbook Pro after Migration

Hi hope someone can help as this problem has stumped me. I cannot get ICHAT to even start having migrated all applications via Migration Assistant from a Macbook to a Macbook Pro. Everything else seems to work fine except when I run ICHAT and follow setup I get to a final screen which locks without showing a DONE button to complete the setup process! I have reloaded OS X, downloaded the OS X Combo OSand tried that, deleted the app and started again just in case but to no avail. Can anyone help? The application worked fine on the old Macbook but not on this machine.

Hi,
Welcome to the  Discussions
Please tells us which version of iChat was moved to the new computer ?
What OS is the new computer at otherwise ?
I would guess you will have to do th Hard way
http://discussions.apple.com/thread.jspa?threadID=1486891&tstart=0
and include the Support folders in any Reinstall
Please note the Post time I add to my post as it may be some time before I post again.
10:58 PM Wednesday; September 2, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Why so long to start my Mac Pro the first time?

Today I just received my new Mac Pro - it's an 8 core machine with the hardware raid card and three 500GB hard drives.
So I carefully unpacked it, checked everything and connected up keyboard, mouse, display and LAN cable. Then I turned it on and I've been waiting ever since.
First all I got was a white screen, then after about 2 or 3 minutes the apple logo in the centre of the screen. After another 15 minutes or so I got a blue screen and then after another 15 minutes or so a "select language" dialogue. 30 minutes on all there is is the spinning coloured wheel.
Surely it is not usual to take so long to start up the first time? Should I just carry on waiting? Suggestions welcome - I'm coming to Mac for the first time from Linux after playing around with a colleague's MacBook.
Thanks

Hi there. It could be one of your drives is actually defective and causing I/O to slow down to a crawl. To verify this, try inserting the DVD that came with your Mac Pro and restarting the machine while holding down the 'C' key. This will boot up the machine off the DVD and bypass your hard disks. If it boots quicker there could be a problem with the drives or something else.

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Application started using Java Web Start doesn't launch the first time

I have a Facebook photo uploader application that I plan to distribute using Java Web Start. I'm using Java 6u4 on Windows XP SP2 with 2GB of RAM. I have Java 6u3, Java 6u4 and Java 5 u14 installed and I'm sure the one used is Java 6u4.
I signed my application and make use of all security settings.
Here is my JNLP file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+"
     codebase="http://www.antaki.ca/bloom/jars"
     href="http://www.antaki.ca/bloom/Bloom.jnlp">
<information>
    <title>Bloom</title>
    <vendor>Carl Antaki</vendor>
    <icon kind="splash" href="http://www.antaki.ca/bloom/Bloom.jpg"/>
    <icon href="http://www.antaki.ca/bloom/bloom32.jpg"/>
<shortcut online="false">
<desktop/>
<menu submenu="Bloom"/>
</shortcut>
</information>
    <resources>
        <j2se version="1.5+" initial-heap-size="32m" max-heap-size="128m" href="http://java.sun.com/products/autodl/j2se" />
        <property name="sun.java2d.d3d" value="false"/>
        <jar href="http://www.antaki.ca/bloom/jars/Bloom.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/BrowserLauncher2-1_3.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/SmartProgressMonitor.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/facebook.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/forms-1.1.0.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/json_simple.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/swing-worker-1.1.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/glazedlists_java15.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/swingx-0.9.1.jar"/>
        <jar href="http://www.antaki.ca/bloom/jars/jhbasic.jar"/>
   </resources>
<security>
     <all-permissions/>
</security>
<application-desc main-class="ca.antaki.www.bloom.gui.Bloom" />
</jnlp>Here is the link for my application http://antaki.ca/bloom/Bloom.jnlp
The first time the application is installed using a link on the browser it's downloaded then the certificate dialog is shown, after that I check the checkbox to accept the certificate permanently. The application doesn't load, it only loads the second time although I see it in the task manager. If I don't accept the certificate permanently it does load. This happens on both Firefox 2 and IE 7. I enabled the console and logging but nothing shows up there.That's really a weird problem, I wonder if Java Web Start is a viable deployment option, it does have great capabilities such as autoupdate but still seems to have important bugs.
Does anyone have any clue about what is going on.
The problem doesn't occur on Ubuntu 7.10.
Thanks,
Carl Antaki

>
You were right my XML file was not correct. I still couldn't find a valid JNLP validator. Sun has to provide that.>No they don't (have to supply a validator for their own document type, though it makes sense to do so), but yes they do (provide a tool that validates XML against schemas). Java can validate XML against a DTD or XSD.
Check these two threads (and chase the links) for more details.
JNLP xsd schema
<http://groups.google.com.au/group/comp.lang.java.programmer/browse_thread/thread/c6f65bf1df5f105d/30c6b7e2dc342dc4>
Validate XML against DTD? XSD OK. SSCCE.
<http://groups.google.com.au/group/comp.lang.java.programmer/browse_thread/thread/5b997a1edb765b11/e831f3066eb4aa38>
Look especially for the posts by Piotr Kobzda.
I had a tool on my site based largely on Piotr's codes, that linked to a valid JNLP DTD and XSD, but unfortunately my site is offline at the moment. Andy assures me that the JNLP 6.0 DTD has been corrected for the developer ..download tutorials of web start, though the online (web site) version may still be invalid.

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

Exporting to iTunes: track doesn't start at the beginning

Hi'all
This isn't a specific GB'08 question...I have exported a number of podcasts to iTunes and downloaded them onto my Shuffle. Annoyingly, they tend not to begin at the start of the track, but rather, a few seconds in. It is possible to rewind to the beginning of the track, so it is all there, but I can't encourage the tracks to begin there!
Any help would be much appreciated!
Many thanks

One trick is to move the entire podcast/song over a measure or two, so it doesn't start on the downbeat of measure 1, but the downbeat of measure 2.
Command A to select all tracks, and then slide everything over one measure to the right so measure 2 is the new "measure 1."
That way, if a bit of measure 1 disappears, it won't effect your audio since it'll be part of the empty measure before your content begins in measure 2.

Satellite A500 - Windows doesn't start, how to recover now?

Hello guys,
Recently , a week ago, i bought a new Satellite A500- 1HK. I installed everything and after i installed Office 2007, after the restart my PC stack on Windows 7 Logo. Pls notice that at this time a had an external HDD connected. That was my first mistake.
My second mistake was that after 5 minutes of inactivity i powered off my PC (not shutdown) and that was it. My PC totally crashed.
My third mistake was that i did not make recovery disks from the beginning and unfortunately i dont have recovery CDS. The recovery program its on a separate partition of my laptop.I tried to solve the problem as follows: I boot the PC, pressing F8 and i went to the repair menu. At the first time after the repair nothing was happened. after this i tried to proceed to the recovery option. i choose the US language and pressed enter. Nothing was happened. the screen shows an error saying: You must log in to access sytem recovery Options. If you are having trouble logging in , please contact your computer administrator for assistance. Click ok to restart the computer.
The only thing i imagine is that the recovery partition also crashed. What can i do now? I alrweady ordered the Recovery CD's from Toshiba and expecting them during the 2 next weeks.
What is your opinion . What happened? I hope that the rexcovery programm will work with CD'S and i will face no problem any more.
Thank you.
Leonardos

Hi buddy,
> I alrweady ordered the Recovery CD's from Toshiba
So in my opinion your question is already answered. Jus wait for the Toshiba recovery disk to restore factory settings.
If HDD recovery doesnt work, your only option is Toshiba recovery disk and now its time to wait for it. Im sure you will get the disk as fast as possible.
Good luck! :)

Satellite L505-13X - Doesn't start at the first time

Similar Messages

Maybe you are looking for