Satellite L505D-S598​3 - CD/DVD-ROM issue
Hello.
I have a Windows 7 Home Edition laptop that will not boot from the CD-DVD-ROM drive. Under normal circumstances, I know that if the boot order is right, the computer should automatically boot from the CD. However, it instead refuses to acknowledge any bootable disks I have in there at all. I have tried from Super Fdisk bootable CD to Linux Mint 9 Live boot CD version i386. My computer seems to just skip over the CD_ROM entirely and immediately boot from the hard drive.
However, it can still read CDs and DVDs perfectly. I have no problem burning items on a CD or pulling items off. I also have no problem playing games or movies that require a CD or DVD.
Solutions I have attempted:
Changing the boot order. Nothing changed.
Creating new CDs. Nothing Changed.
Gently cleaning the drive. Nothing changed.
Pressing the left and right arrow keys during the POST. Though it did throw me into the screen in which I choose what I want to boot, my only option was Windows 7 in the end.
Checking the Device Manager. My drive is working perfectly according to my computer.
Changing drivers. Updating wasn't possible as I already had the latest drivers, rolling back wasn't an option because there wasn't anything to roll back to, and disabling and enabling changed nothing.
Is there anything else I can do? I'm trying not to buy a new drive, as I'm short on money. I'll do it if I have to, but if I don't have to...
Thanks for any help or advice.
Satellite L505D-S5983
You might try reflashing the BIOS.
ACPI Flash BIOS version 1.10 for Satellite L500D/L505D (PSLV6U)
-Jerry
Similar Messages
-
I recently had my Satellite L505D-S5983 laptop's hard drive die due to disk failures and had to replace the hard drive. Because the laptop is older I am not able to read the activation key from the laptop and do not have a recovery partition from the dead drive. How can I authorize a version of windows 7 on the new hard drive and install it?
Satellite L505D-S5983
Downloads here.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 70 of the User's Guide.
Satellite L500 Series User’s Guide
If the new hard disk uses advanced-format technology, be prepared to install a new storage driver first thing.
Intel Rapid Storage Technology
-Jerry -
CD/DVD-rom Issues; Won't Boot
Hi, I am having a problem booting when I remove my CD-Rom 'Slave' or try to replace it with a DVD-Rom.
Below I will give my computer specs.
I have 2 hard drives, so the Primary IDE slots hold my 2 hard drives; one a
Master and the second one is the slave to the master.
On the Seconday IDE slots, I also have 2 cd-roms, one is the master and the
other is the slave to the master. The master is my cd/read/write cd-rom. I
want to leave it and change the slave cd-rom to a DVD-rom (not a dvd r/w
rom)...
I bought bestbuys dvd-rom, took out the 'slave' cd-rom and put the dvd-rom
in with the pin set for the slave. I booted my computer and it wouldn't boot
pass the first booting page. It wouldn't boot into windows.. What could be
wrong?????????
I took the new dvd-rom back out and left the secondary slave empty and tried booting and it
wouldn' t boot with nothing in the secondary cd-rom bay .. wierd to say the
least.. Like I said the secondary IDE slot is the Master of r/w cd-rom and I
never removed it or touched it, it is still there..
I then put my old cd-rom back in the secondary (slave) and waited a few
mintues and booted up my computer.. It booted with no problem.. I repeated
this whole sequence several times with the same results.. I for the life of
can't figure it out... My computer should boot with or without the second
cd-rom (slave), shouldn't it????? Adding a cd-rom or a dvd-rom should not keep my
computer from booting up should it?????
In my cmos, I have it set to boot-up with the hard drive as my first
boot-up, the second is the cd-rom.. but I don't see how removing or replacing
the 'slave' cd-rom would prevent it from booting into windows..
Yes, I have check the cables, settings and everything in my whole computer.
Can someone please tell me what is causing this.. I need a dvd-rom drive.
not paticularly the brand of the dvd-rom I just bought (which I have already
took back anyway) but I do need to get a dvd-rom asap in my computer so I am
hoping someone might know a solution to this problem..
Thanx for any help,
Granny (below are my specs)
SYSTEM INFORMATION:
Mother Board: K7N2 Delta series MS-6570 (v1.X) ATX Mainboard
AMD Athlon™ XP 2500+ 1.84 GHz, 2.00 GB Ram
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Manufacturer NVIDIA
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 6 Model 10 Stepping 0 Authentic AMD ~1837 MHz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 11/7/2003
SMBIOS Version 2.3
NVIDIA GeForce 6800 GT Video card 256MB
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Total Physical Memory 2,048.00 MB (just updated my ram from 512 mb last week)
Available Physical Memory 1.59 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.95 GB
Page File Space 2.60 GB
Page File C:\pagefile.sys
Power Supply 400 Antex (ATX12V)
Primary IDE
Master 40 GB Hard Drive
Slave 160 GB Hard Drive
Secondary IDE
Master CD-R/W Rom: TDK 52x EIDE
Slave to Master CD-R/W Rom: MTRP 50x EIDE
This is all it gave on the storage/ide under my system info;
Storage/IDE
Name Standard Dual Channel PCI IDE Controller
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCI\VEN_10DE&DEV_0065&SUBSYS_57001462&REV_A2\3&13C0B0C5&0&48
I/O Port 0x0000F000-0x0000F00F
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes),
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&26D47942&0&0
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
IRQ Channel IRQ 14
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes),
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&26D47942&0&1
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
IRQ Channel IRQ 15
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes),With the one drive alone did you remove the jumper?
Sometimes drives are picky and fight over who is master/slave. Try switching them. -
Satellite L505D-S598​3 and Turtle Beach gaming headsets
Do Turtle Beach headsets work with Satellite L505D-S5983 laptops? I was thinking about getting a PC Ear Force Z1 Head set, but I wasn't sure if it would be compatable with my laptop. I have Windowsx
Hi! Why do you think it's hardware?? Have you tried to restore back to factory? Have you tried to boot with the system repair disc??http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
There is a lot messing in your message
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
Satellite P205D-S7802: CD/DVD drive issue; driver corrupted or missing
Hi,
Dvd unit has not recognized by the OS.
When i open My Computer the only unit displayed is C, there's no D unit.
Then I go to device manager to check it, and I notice that the DVD unit has problems, then i open properties and the error message is:
"HL-DT-ST DVD RAM GSAT20N ATA DEVICE
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing".
First i thought that was a hardware problem, but I introduced the windows vista disc at boot and the unit read it very well. Then I choose update driver from device manager and the updater told me that the best driver was already installed for the device.
I tried to replace the .sys and .info files for cd-roms but nothing happened either.
What is happening, please help, is urgent i need to use my dvd unit.
Regards.Try this:
remove the CD/DVD drive from the device manager list
access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
This is described also here in the MS knowledge base article:
http://support.microsoft.com/kb/270008/en-us
Check it out! -
Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD
Hi,
My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
DVD drive isTSST CDDVDW-TS-L633A
Can you help?Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.
-
Satellite P300 19P - CD/DVD Burning Issue
Hi, I am new to the forum and hope that somone will be able to help.
I am having problems burning DVD's. When I use burning software the image is usually copied ok and then the burning process starts, which usually lasts a couple of moments and then the machine spits out the disc part burnt and wasted.
I usually use Corel DVD Copy 6, but have tried the TOSHIBA programmes and others such as NERO. Using Corel VideoStudio, this burns discs with a 90% sucess rate, but the problem comes when trying to copy my own created discs.
I have tried different Disc types (ie +R and -R), and I have tried burning speeds too.
Has anbody else suffered this problem?
I have managed to find an error code 06077-26-2A040902 , does this mean anyhting to anyone?
The TEMPRO Alerts seem to have provided firmware updates for a number of other DVD drives, but not the one in my machine? Perhpas it is due one? All the drivers are up to date.
Thanks for listening and anybodies help is more than welcome.
Cheers.Hi, sorry it has taken so long to post a reply again - many apologies.
Thanks for you suggestion, which I have completed and tried. Although, this did help and I have managed to copy some discs with limited sucsess I am still having problems. I also made sure that the filters are still removed as mentioned.
I use Corel VideoStudio to create my discs, which seems to work fine. The initial burn is successful and will play in any DVD machine perfectly. Since this issue I have given up using Corel DVD Copy6 and reverted to using the Toshiba DVD Backup tool, but this only allows a single disc copy (can't produce multiple copies). This works with a very low success rate.
I have so far:
- Made sure lense and discs are clean.
- Tried different media (+R and -R)
- I use good quality discs.
- Tried the filter removing as mentioned.
Is there any other suggestions as to what I can do to resolve this issue?
Many thanks for your continued help. -
Satellite U200-181 - compatibile DVD-ROMs
Hello
I have a question regarding compatibile DVD drives for Tohsiba U200-181.
I looked through this forum and found info that only UJDA765 and UJ-842
are compatibile with my laptop. I originaly had UJ-842 and tried to replace
it with UJDA765 but with no luck. CD ROM error during startup.
Many beay seller advertise other models e.g. UJ-832, UJ-862 as compatibile for this model too.
So i tried using UJ-862 removed from Toshiba U300 also with no luck.
I would appreciate any info on acceptable models or ways of
installing any of the new like UJ-862.
Thanks in advanceI guess the usage of other CD/DVD drives would not be possible because of compatibility problems. Even if other optical disk drives would fit in the ODD bay, the BIOS would not recognize it correctly.
But I think the info about compatible drive in user manual refers only to the optical disk drives which were provided with the different U200 models.
So possibly other ODDs could be compatible but this can be just tested at your own hand -
Satellite A200-23P - DVD-rom mechanic not working
I am sorry for my English in advance this topic! - Thanks
I have very big problem with my DVD writer (rom).
I bought SAT A200-23P three weeks ago.
The OS Win VISTA was installed. DVD-rom worked good.
If I installed Win XP to second partition on my HDD (before I make install disc with driver for sata disc in nlite) and installed all drivers and utilities for Toshiba notebook, I found that my DVD-rom does not respond while I press eject button.
DVD mechanic does not respond for eject in the XP and not even in BIOS!
Interesting is, DVD mechanic is detecting in BIOS, is detecting in XP, operating system XP votes - DVD mechanic working correctly - its fable.
However, if I installed XP on second partition, Win Vista does not load :(
I don't have a second chance for second selection (Vista and XP).
I have now XP only, even if Vista is on first partition - I didnt delete it.
Do you think the DVD-rom is HW or SW problem?
I think, seeing that DVD-rom not respond in BIOS - HW error.
But is very strange, if I install XP from DVD mechanic and close then is done, DVD-rom not working ... : (
If I open it manually and insert the disc, DVD not working (led diode not blink, just if I turn computer off, led blinked once).
PLS help me somebody -
THANKS!Hi Michal
Your issue is very strange I mean the CD/DVD drive issue
Fact is that the CD/DVD drives eject function should functions no matter what OS was installed on your notebook. It has nothing to do with your software on the HDD.
So I wonder why the eject button works with Vista and not with preinstalled XP OS ?:|
My only plausible explanation is that sometimes there is a loose connection between the notebook and the drive. At the other hand the issue could be related to the hardware problem too
As you see its not easy to say whats wrong exactly we can only speculate.
Now some details about your dual OS installation.
You cannot choose between the Windows XP and Vista because the Vista boot manager was overwritten during the Win XP installation.
This happened to me too. I have installed Win XP on my Satellite and was not able to start Vista.
The solution was easy; I have used another original Vista DVD (from my friend) and booted from this DVD. The Vista has renewed the boot manager and then I was able to boot the Vista.
Then I have downloaded the tool called Easy BCD.
This tool can change the settings the Vista boot manager. I have edited it and inserted a new Windwos XP OS entry.
Thats it! -
Satellite L505D-ES5025microphone issues please help me
When ever I try to video chat my friends on the other end hear a high pitched screaming sound and my voice is very soft. When I record video I have the same issue with the sound. I have no idea how to fix it, or if I can fix it. Anyone know what the problem is?
Satellite L505D-ES5025
Can't hurt to reinstall the driver.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry -
Satellite A200-1M8 PAE6E: CD/DVD drive issue - power calibration error
Hi,
I have an Satellite A200-1M8 ( or A200 PAE6E ) with Vista and for some time I've been trying to burn some dvds which I failed due to power calibration error.
I tested my DVD-ROM and it works normally, the problem is it does not read (recognise) every dvd.
Is there anyone who can help me out about this?
Or how can I learn which type of media my DVD-ROM would read?
Thanks in advance.Hi
I think I have founded an interesting article for you:
[Is there a list of supported type of CD-R/-RW or DVD-R/+R/-RW/+RW/-RAM discs which should be used?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=36]
But generally a power calibration error means that its the media is faulty or not compatible with the drive. -
Volume Control Issue (Satellite L505D-S5983)
My laptop: Toshiba Satellite L505D-S5983
So here's the issue:
Just recently I've started having problems using my volume control located next to the SD card reader slot.. You know, the volume 'slider'. It's been acting rather strangely, when I try to adjust my volume it doesn't change at all from the current volume percentage that it's at... Even when I'm sliding the slider. So then, I have to go into the manual volume in my hidden icons menu to change the volume. However, after I go through this step, I am then able to use my volume 'slider' control, and it actually works.
So, I'd like to know:
A) Why this is happening?
B) Am I able to fix this issue?
C) How would I fix this issue?
ox♥Scairry♥xoStill in need of a response.
ox♥Scairry♥xo -
Dvd Rom Drive in a Satellite 4030 cds???
I have an old Toshiba Satellite 4030 cds.I would like to know if i am able to install a dvd rom drive into this laptop. If yes which models would fit this machine.
Thank You
PBHi Breck,
in my opinion there is no way to upgrade the internal CD Drive to a DVD Drive because the CD Drive is fixed mounted and could only replaced by the same model!
Only an external solution like USB or PCMCIA would fit!
Sorry!
Rudi -
Replacing a DVD-Rom on a satellite S1410-S104
Can anyone advise me on how to replace the DVD-Rom on my SAT S1410 with a DVD\CD-RW.
I had hoped it would simply be a case of unclipping something and it would slide out like many other laptop models, but as yet I can't get the old dvd-rom out.
Any ideas?
Thanks
ScottIn fact you have a screw on bottom side of your satellite, but you have to remove the keyboard to have access to another screw. To remove the keyboard you must pull the plastic sheet on the top of keyboard, when you do that you see another tree screws, you must remove this screws and lift the keyboard.
And finally you see another screw who fix the CD drive to the chassis, remo9ve the screw pull the drive out and replace the drive, mount everything and voil.
Not easy but ... -
DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8
I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
Any solution?You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8. See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit
Maybe you are looking for
-
Unable to open connection error
Hi All, I have a report that is connecting to two ODBC DSN connections. Using Crystal Reports 2008 it opens fine and generates reports (we did this even on the Crystal Server using CR 2008). When we load this report onto the Crystal Reports Ser
-
Prompt occurs after installing Perian
I recently installed the "Noise Factory" suite of effects for FCP and Motion. Really great effects that can sampled, then purchased ala carte. After installing that, I then was doing some converting with Streamclip, which suggested I needed Perian t
-
Training Proposal in Qualification Catalog
Hi, What are the settings required for generating Training Proposal when we are performing Profile Matchup?Also please let me know what data should be maintained for this purpose in BEG/BET/BE. With Regards, Kaustuv Goswami.
-
Flash Remoting HTTP Status 500
Kindly help me with getting Flash Remoting started. I am using CF8 and my Flex client connect to the Flash Remoting. Fault Detail: Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: ' http://localhost/flex2gateway/cfamfpol
-
Hello to all - I'm moving a post from the general PS discussion over to ACR about synchronizations not working. Please see this thread: http://forums.adobe.com/message/6259863#6259863 The basics are as follows: I'm trying to make batch adjustments t