Satellite L50T-A - Touchpad not detected

I have a Toshiba Satellite L50T-A running Windows 8 64-bit. All of a sudden my touch pad has disappeared from settings. When I do a search for new hardware it is not detected either. Is it un plugged?
I would appreciate pictures with exactly what I must do.
Thank you in advance.

Hello
If I understand you right touchpad is not detected and not listed in device manager, right?
Problem is that you cannot do much about that and force touchpad to work.
What you can try is to test functionality with factory settings. With other words, you can set BIOS to default settings and reinstall original recovery image. After doing this your notebook will have identical settings as on first day after first start.
If you do this and the result is the same it is possible that touchpad is defective or there is some problem with touchpad connection to the mainboard. This must be checked by Toshiba service.
Do you use external mouse at the moment?

Similar Messages

Can't install Win 8 - Satellite Pro C660 does not detect HDD

Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno Moreira

Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out.

Toshiba Satellite A305 S6839 Battery Not Detected

Hellos all.
So as you can see, I have a toshiba satellite A305 S6839. Recently my laptop has been telling me I should probably replace my battery, so along comes Cyber Monday...
This is the replacement battery I bought.
Technical Details
Battery Type : Li-ion
Voltage :11.1V Capacity :7200mAh
Weight: 584g, Battery Cells: 9 cells
Brand New Replacement Product, Works as Genuine Parts.
The Replacement Battery come with Full 1 Year warranty,Batteries are in high grade quality and certified by CE and RoHS
Product Description
Product Features:
* Over-charge protection
* Over-discharge protection
* Over-heat protection
* Over-current protection
* Short-circuit protection
* High capacity circulatory function
* Low Power Consumption IC Design
* No Memory Effect
* High Charge current
Fit Machine Model:
Toshiba Dynabook TV/68J2 Satellite A350D series AX EX TX Series A200 A205 A210 A215 A300 A300D A305 A305D A350 A355 A500 A505D L200 L300 L300D L305 L305D L500 L500D L505 L505D L550 L555 L555D M200 M205 A200 A210 Pro A300 A300D L300 L300D L50 L550
Compatible Part NO: ASUS: Toshiba PA3533U-1BRS PA3533U-1BAS PA3534U-1BAS PA3534U-1BRS PA3535U-1BRS PA3682U-1BRS PABAS098 PABAS174
At first it didn't charge. But after doing a power reset, it charged up. And then I did a charge/discharge cycle. The problem is that right after I did my first discharge to break it in, the battery was not detected again. So I ran through everything. Power cycles. Uninstalled ACPI battery driver and reinstallled it to no avail Updated my bios to 1.80, since there's not 3.0 version for my lappy model. My old battery still charges though my laptop still tells me it needs to be replaced.
So...
Is there anything more I can do? Should I just return it and get a new replacement battery or is there still anything else that can be done? Was it just not compatible with my laptop even though it said it was? Any help would be great! Thanks!

You may want to look at the fixes in this article:
Battery not charging, not being recognized, or losing charge
If it still doesn't work, there may be a problem with the battery or a hardware problem in the laptop itself.
- Peter

Satellite A300d - New battery not detected

I recently got a new battery PA3533U-1B RS/AS for my aged Satellite A 300d.
When I place the new battery in the laptop, unplugged, press power button, the red battery indicator flashes several times, no power.
When i plug in the mains to the laptop, the red battery indicator stays red as-though charging, once windows has loaded the battery shows as Not Detected.
I have checked connection and gone through device manager- unistall/install but come to no luck. This is the 3rd replacement battery I've had from this company who have a very positive review. Is it my laptop or the battery?
I do have a good faithful 20 minutes battery that recognises every time and charges without a problem.
If you could please help it would actually stop me from going crazy, thanks in advance :)

Hi Paolo,
Thanks for your reply. I have kept the battery on charge for 12 hours +, both the 2nd and 3rd battery I have received, and neither of them show as detected.
When the laptop is off, new battery in, ac in, red light stays on for about an hour then it continuously flashes. This happens with both. After charging it won't turn on until insert ac, then when windows loads, bat not detected.
When I put my original battery in in turns on without ac, and battery shows and info correct.
I will speak to the dealer again, I returned the 1st battery, once i reported 2nd one faulty, he sent me a 3rd. The dealer has really positive feedback and good comment, it's just baffling?!
Thanks again for your help.
Daniel

Satellite 5200-903 does not detect Wireless Adapter

hello everybody,
I wonder if anyone can tip me on this one...
Since I reinstalled the OS ( have XP pro SP2 ) PC seems not detecting anymore the WIRELESS adapter in Device manager under Network Adapter.
Also the light of the wireless switcher does not turn on anymore.
I am also having problems to access the BIOS to check if the adapter is detected there, I do not have a Toshiba HW setup in Control Panel as indicated in the manual.
Any suggestions?

Hello Juliana
The question is how did you install the OS? If you use recovery CD all tools will be installed including Toshiba HW setup. If the unit is preinstalled with Microsoft WXP CD you must install all Toshiba stuff belatedly.
Just short explanation about WLAN card. Basically if the light of the wireless switcher does not turn on thats clearly indicate onto hardware problem. I assume that the WLAN card is defective. Check also if the card is listed in device manager.
If you want to enter BIOS settings pres ESC button at the boot up procedure and keep it down for a few seconds.
Bye

[SOLVED] HP Touchpad not detected or working with kernel 3.4.6-1

On my HP Folio 13 (https://wiki.archlinux.org/index.php/HP_Folio_13), the touchpad stopped working tonight after upgrading to kernel 3.4.6-1.
Downgrading back to 3.4.5 fixed it. I've tried AUR xf86-input-synaptics-led and the stock xf86-input-synaptics packages.
Doesn't even seem to be detected, as there's not even a mention or reference to "synaptics" in /var/log/xorg.0.log, and it's nowhere to be found under /dev/inputs/.
It isn't listed under "xinput -list" either (normally shows as "SynPS/2 Synaptics Touchpad").
Last edited by sultanoswing (2012-07-26 08:18:15)

anrxc wrote:Hello you need to rebuild synaptics-led with the new kernel if you have it installed. It replaces/overrides psmouse module in the kernel, and if it fails to load you would be left without a touchpad.
Yep that was the problem. I'd forgotten I'd compiled and installed the psmouse module using synaptics-led (/face-palm)
The AUR package, along with xf86-input-synaptics-led, did make the double-tap top-left corner hotspot work to turn the touch pad on and off. The LED light showing whether the pad is on or off never worked, however.
So - I'm now back to stock xf86-input-synaptics and on kernel 3.4.6-1 and all is working as it should.

Satellite L series - Touchpad not working when AC charger pluged in

guys.... pls, some help... i have headaches ;))
my touchpad its almost frozen, when i plug my AC charger
its working only on battery
when i plug the charger, the touchpad its almost frozen... if i put an USB mouse, its working but still, not perfect... the cursor moves a little slower... and, the buttons its like they have no strenght when i push them... sometimes works, sometimes i have to push 2 or 3 times, to click''; the touchpad buttons are working perfectly.... so, i use the mouse to move the cursor and to click , i use the touchpad buttons
have any ideea why ?
=>> i did uninstaled and reinstaled the drivers
=>> i even did a bios update, but nothing changed
=>> i disabled and also uninstalled the ACPI from the battery, with no use
=>> NO, its not a FN problem
pls... ? :)

Hi
There are some threads in this forum where some users reported a similar issue.
As far as I know the problem was a AC adaptor malfunction.
Using new, compatible AC adaptor has solved the issue.
Good luck!

Touchpad not detected after Xorg update

cat /proc/bus/input/devices:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=800000000000 0 0 500f02102002 380307cf810d001 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=4000 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.2/input0
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.3/input0
S: Sysfs=/class/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=05a9 Product=2640 Version=0100
N: Name="Laptop Integrated Webcam"
P: Phys=usb-0000:00:1d.7-6
S: Sysfs=/class/input/input11
U: Uniq=
H: Handlers=event11
B: EV=3
B: KEY=1 0 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input12
U: Uniq=
H: Handlers=mouse2 event12
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

mcmillan wrote:Probably related to the xorg upgrade with hotplugging
http://wiki.archlinux.org/index.php/Xor … otplugging
If you haven't already searched the forums there seem to be a few threads going already where people are dealing with issues with this upgrade
I searched and got my keyboard and touchpad set up to work with hotplugging. Keyboard worked, touchpad did not. Any configuration changes I made dont get reconginzed. I dont know what the deal is unfortunately

Satellite Pro A60 - HDD not detected by BIOS

Hi to all !!
I've been given a Satellite Pro A60 (PSA65E) , for free ....'cause it has a bug!!! But I would like to fix it and use it.
Problem is that HDD is not recognized by the BIOS. Strange enough, it is possible to format it during initial phase of an OS installation from scratch ( I've tried with Win XP and Win 2000 ), but installations do not proceed further since it will not boot from HD. If I try to install a seccond time, it does find some data already present in the HD and gives warnongs ... meaning that it is also possible to write on the disk.
BIOS screen says : no drive.
CD drive is OK, shown as secondary.
I did also search through the Fora at no avail.
Actions done so far :
* flashed the BIOS , now at 1.90 release
* Replaced the original HD (Toshiba, 40 GB ) with another one known to be good , smaller ( Toshiba as well , 30 GB)
* Tried to pull out CD drive and verified BIOS does recognize it has been removed, and recognized it again when put back in. The same manouvre done with the HD does not change anything in the BIOS screen: it always says 'no drive'.
* Tried with DOS version of Partition Magic : it says 'no drive found'. Same with the backup disks that came with the PC.
* Tried other stuff found in Fora : remove all power sorce, let the PC for several minutes.... opened up and checked for visible problems in the HDD area and so on.
Any suggestion would be be appreciated !!!
Thanks
aurcri

Hi to all!
I've spent some hrs to try to find out what is going on. I surrender. The result stays the same: Satellite Pro 'sees' just non Toshiba HDD's. Toshiba HDD's work fine on other notebooks. Tried also the available Toshiba HDD's on a third unit. The only explanation I can guess of is that Satellite BIOS queries the installed HD something that other notebooks do not, and most of the HD reply as it expects and others ( Toshiba's ) do not.
The most suspected item remains BIOS, IMHO.
Talked also with the guy who handed over the broken Satellite to me: no help... he just stated that he never had a problem since the beginning and then suddenly one morning he could not IPL anymore. Oh well, he got lost with the back up CD's, due to the 'strange' behavior of the problem. Taking into consideration that it was possible to R/W from the HD but not to IPL, it is understandable.
I think we can close this thread, unless somebody from Toshiba Storage Division can shade some light....or the Bios guru, maybe.... it would be nice to know.
Thanks to all for the attention
Aurcri

Satellite S1800-100 HDD not detecting

Hi there,
I have just got an old laptop, the guy that gave it to me thinks that he had deleted the boot sector so it needed reformatting and reloading.
However I booted up into the windows 2k set up disk only to find that there was no HDD detected.
I then went into the BIOS to see if it was detected there to find that it isn't.
I just want to check that I'm right in thinking that the HDD is actually knackered?

Hello
It is possible that HDD is defective but there can be also defective HDD controller placed on mainboard. If possible try to obtain other HDD and you will see if new HDD will be recognized properly.

Satellite L50-A01Q - WLAN not detected after install Atheros WLAN Driver

I have a L50-A01Q. I've recently replace the harddisk to a SSD. I've installed Win8.1 via a DVD downloaded from Microsoft. I've also installed the Atheros Wireless LAN Driver download from Toshiba. However, the system does not recognise the WLAN. Anyone has reinstall windows 8.1? how did you get the driver?

I have checked AU download page for your notebook model and there are offered two WLAN drivers: Atheros and Realtek.
If Atheros driver is not recognized it is possible that Realtek WLAN card is used in your notebook model. Try to install this WLAN driver.

Touchpad now working (not detected)

Good day,
Since a week (maybe kernel 3.3.2 update, not sure) ago my touchpad stopped working (at all). I have attempted googling many times but could not fix it (neither do I found a bug in arch or anywhere for that). Today (kernel 3.3.3) it got working twice after restarts (out of nowhere), but no more.
What I've found is that it seem to not be detected (or it's detected as something completely different that doesn't even get close to a touchpad). It doesn't show up in Xorg.0.log, nor dmesg, nor in /proc/bus/input/devices.
Please, suggest where to dig - will provide more information (logs) if not enough.
Below are attached the logs after a fresh restart (touchpad not working):
Xorg.0.log
[ 15.861]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 15.861] X Protocol Version 11, Revision 0
[ 15.861] Build Operating System: Linux 3.3.1-1-ARCH x86_64
[ 15.861] Current Operating System: Linux arch-vostro 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012 x86_64
[ 15.861] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 15.861] Build Date: 14 April 2012 07:09:45AM
[ 15.861]
[ 15.861] Current version of pixman: 0.24.4
[ 15.861] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.861] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.862] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 25 21:51:33 2012
[ 16.007] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.043] (==) No Layout section. Using the first Screen section.
[ 16.043] (==) No screen section available. Using defaults.
[ 16.043] (**) |-->Screen "Default Screen Section" (0)
[ 16.043] (**) | |-->Monitor "<default monitor>"
[ 16.043] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.043] (==) Automatically adding devices
[ 16.043] (==) Automatically enabling devices
[ 16.159] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 16.159] Entry deleted from font path.
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.166] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 16.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.166] (II) Loader magic: 0x7c7ae0
[ 16.166] (II) Module ABI versions:
[ 16.166] X.Org ANSI C Emulation: 0.4
[ 16.166] X.Org Video Driver: 12.0
[ 16.166] X.Org XInput driver : 16.0
[ 16.166] X.Org Server Extension : 6.0
[ 16.168] (--) PCI:*(0:1:0:0) 10de:0427:1028:0273 rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
[ 16.168] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.168] (II) LoadModule: "extmod"
[ 16.232] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 16.248] (II) Module extmod: vendor="X.Org Foundation"
[ 16.248] compiled for 1.12.1, module version = 1.0.0
[ 16.248] Module class: X.Org Server Extension
[ 16.248] ABI class: X.Org Server Extension, version 6.0
[ 16.248] (II) Loading extension MIT-SCREEN-SAVER
[ 16.248] (II) Loading extension XFree86-VidModeExtension
[ 16.248] (II) Loading extension XFree86-DGA
[ 16.248] (II) Loading extension DPMS
[ 16.248] (II) Loading extension XVideo
[ 16.248] (II) Loading extension XVideo-MotionCompensation
[ 16.248] (II) Loading extension X-Resource
[ 16.248] (II) LoadModule: "dbe"
[ 16.249] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 16.259] (II) Module dbe: vendor="X.Org Foundation"
[ 16.259] compiled for 1.12.1, module version = 1.0.0
[ 16.259] Module class: X.Org Server Extension
[ 16.259] ABI class: X.Org Server Extension, version 6.0
[ 16.259] (II) Loading extension DOUBLE-BUFFER
[ 16.259] (II) LoadModule: "glx"
[ 16.259] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.135] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.143] compiled for 4.0.2, module version = 1.0.0
[ 17.143] Module class: X.Org Server Extension
[ 17.143] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012
[ 17.143] (II) Loading extension GLX
[ 17.143] (II) LoadModule: "record"
[ 17.143] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.158] (II) Module record: vendor="X.Org Foundation"
[ 17.158] compiled for 1.12.1, module version = 1.13.0
[ 17.158] Module class: X.Org Server Extension
[ 17.158] ABI class: X.Org Server Extension, version 6.0
[ 17.158] (II) Loading extension RECORD
[ 17.158] (II) LoadModule: "dri"
[ 17.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.199] (II) Module dri: vendor="X.Org Foundation"
[ 17.199] compiled for 1.12.1, module version = 1.0.0
[ 17.199] ABI class: X.Org Server Extension, version 6.0
[ 17.199] (II) Loading extension XFree86-DRI
[ 17.199] (II) LoadModule: "dri2"
[ 17.199] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.214] (II) Module dri2: vendor="X.Org Foundation"
[ 17.214] compiled for 1.12.1, module version = 1.2.0
[ 17.214] ABI class: X.Org Server Extension, version 6.0
[ 17.214] (II) Loading extension DRI2
[ 17.214] (==) Matched nouveau as autoconfigured driver 0
[ 17.214] (==) Matched nvidia as autoconfigured driver 1
[ 17.214] (==) Matched nv as autoconfigured driver 2
[ 17.214] (==) Matched vesa as autoconfigured driver 3
[ 17.214] (==) Matched fbdev as autoconfigured driver 4
[ 17.214] (==) Assigned the driver to the xf86ConfigLayout
[ 17.214] (II) LoadModule: "nouveau"
[ 17.219] (WW) Warning, couldn't open module nouveau
[ 17.219] (II) UnloadModule: "nouveau"
[ 17.219] (II) Unloading nouveau
[ 17.219] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 17.219] (II) LoadModule: "nvidia"
[ 17.219] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 17.322] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.323] compiled for 4.0.2, module version = 1.0.0
[ 17.323] Module class: X.Org Video Driver
[ 17.349] (II) LoadModule: "nv"
[ 17.349] (WW) Warning, couldn't open module nv
[ 17.349] (II) UnloadModule: "nv"
[ 17.349] (II) Unloading nv
[ 17.349] (EE) Failed to load module "nv" (module does not exist, 0)
[ 17.349] (II) LoadModule: "vesa"
[ 17.349] (WW) Warning, couldn't open module vesa
[ 17.349] (II) UnloadModule: "vesa"
[ 17.349] (II) Unloading vesa
[ 17.349] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.349] (II) LoadModule: "fbdev"
[ 17.349] (WW) Warning, couldn't open module fbdev
[ 17.349] (II) UnloadModule: "fbdev"
[ 17.349] (II) Unloading fbdev
[ 17.349] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.350] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012
[ 17.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.362] (++) using VT number 7
[ 17.442] (II) Loading sub module "fb"
[ 17.442] (II) LoadModule: "fb"
[ 17.442] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.457] (II) Module fb: vendor="X.Org Foundation"
[ 17.457] compiled for 1.12.1, module version = 1.0.0
[ 17.457] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.457] (II) Loading sub module "wfb"
[ 17.457] (II) LoadModule: "wfb"
[ 17.457] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.471] (II) Module wfb: vendor="X.Org Foundation"
[ 17.471] compiled for 1.12.1, module version = 1.0.0
[ 17.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.471] (II) Loading sub module "ramdac"
[ 17.471] (II) LoadModule: "ramdac"
[ 17.471] (II) Module "ramdac" already built-in
[ 17.511] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.511] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 17.511] (==) NVIDIA(0): RGB weight 888
[ 17.511] (==) NVIDIA(0): Default visual is TrueColor
[ 17.511] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.511] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.252] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 19.252] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.262] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 19.263] (--) NVIDIA(0): Memory: 524288 kBytes
[ 19.263] (--) NVIDIA(0): VideoBIOS: 60.86.64.00.27
[ 19.263] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.263] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.270] (--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 19.270] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.270] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 19.270] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.316] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 19.316] (==) NVIDIA(0):
[ 19.316] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.316] (==) NVIDIA(0): will be used as the requested mode.
[ 19.316] (==) NVIDIA(0):
[ 19.316] (II) NVIDIA(0): Validated modes:
[ 19.316] (II) NVIDIA(0): "nvidia-auto-select"
[ 19.316] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 20.327] (--) NVIDIA(0): DPI set to (110, 108); computed from "UseEdidDpi" X config
[ 20.327] (--) NVIDIA(0): option
[ 20.327] (--) Depth 24 pixmap format is 32 bpp
[ 20.327] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 20.347] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 20.347] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 20.347] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 20.347] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 20.347] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 20.347] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 20.347] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 20.347] (II) NVIDIA(0): Config Options in the README.
[ 20.359] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 20.684] (II) Loading extension NV-GLX
[ 20.780] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.780] (==) NVIDIA(0): Backing store disabled
[ 20.780] (==) NVIDIA(0): Silken mouse enabled
[ 20.781] (==) NVIDIA(0): DPMS enabled
[ 20.781] (II) Loading extension NV-CONTROL
[ 20.782] (II) Loading extension XINERAMA
[ 20.782] (II) Loading sub module "dri2"
[ 20.782] (II) LoadModule: "dri2"
[ 20.782] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.782] (II) Module dri2: vendor="X.Org Foundation"
[ 20.782] compiled for 1.12.1, module version = 1.2.0
[ 20.782] ABI class: X.Org Server Extension, version 6.0
[ 20.782] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.782] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.782] (==) RandR enabled
[ 20.782] (II) Initializing built-in extension Generic Event Extension
[ 20.782] (II) Initializing built-in extension SHAPE
[ 20.782] (II) Initializing built-in extension MIT-SHM
[ 20.782] (II) Initializing built-in extension XInputExtension
[ 20.782] (II) Initializing built-in extension XTEST
[ 20.782] (II) Initializing built-in extension BIG-REQUESTS
[ 20.782] (II) Initializing built-in extension SYNC
[ 20.782] (II) Initializing built-in extension XKEYBOARD
[ 20.782] (II) Initializing built-in extension XC-MISC
[ 20.782] (II) Initializing built-in extension SECURITY
[ 20.782] (II) Initializing built-in extension XINERAMA
[ 20.782] (II) Initializing built-in extension XFIXES
[ 20.782] (II) Initializing built-in extension RENDER
[ 20.782] (II) Initializing built-in extension RANDR
[ 20.782] (II) Initializing built-in extension COMPOSITE
[ 20.782] (II) Initializing built-in extension DAMAGE
[ 20.783] (II) Initializing extension GLX
[ 21.299] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.300] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.300] (II) LoadModule: "evdev"
[ 21.300] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.309] (II) Module evdev: vendor="X.Org Foundation"
[ 21.309] compiled for 1.12.0, module version = 2.7.0
[ 21.309] Module class: X.Org XInput Driver
[ 21.309] ABI class: X.Org XInput driver, version 16.0
[ 21.309] (II) Using input driver 'evdev' for 'Power Button'
[ 21.309] (**) Power Button: always reports core events
[ 21.309] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.309] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.309] (--) evdev: Power Button: Found keys
[ 21.309] (II) evdev: Power Button: Configuring as keyboard
[ 21.309] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.309] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.309] (**) Option "xkb_rules" "evdev"
[ 21.309] (**) Option "xkb_model" "evdev"
[ 21.309] (**) Option "xkb_layout" "us"
[ 21.329] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 21.329] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.329] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.329] (**) Video Bus: always reports core events
[ 21.329] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 21.329] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.329] (--) evdev: Video Bus: Found keys
[ 21.329] (II) evdev: Video Bus: Configuring as keyboard
[ 21.329] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 21.329] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.329] (**) Option "xkb_rules" "evdev"
[ 21.329] (**) Option "xkb_model" "evdev"
[ 21.329] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.330] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Power Button'
[ 21.330] (**) Power Button: always reports core events
[ 21.330] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.330] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.330] (--) evdev: Power Button: Found keys
[ 21.330] (II) evdev: Power Button: Configuring as keyboard
[ 21.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 21.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.330] (**) Option "xkb_rules" "evdev"
[ 21.330] (**) Option "xkb_model" "evdev"
[ 21.330] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.330] (II) No input driver specified, ignoring this device.
[ 21.330] (II) This device may have been added with another device file.
[ 21.330] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.330] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.330] (**) Sleep Button: always reports core events
[ 21.330] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.330] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.330] (--) evdev: Sleep Button: Found keys
[ 21.330] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 21.331] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.331] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event11)
[ 21.331] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 21.331] (II) Using input driver 'evdev' for 'Integrated Webcam'
[ 21.331] (**) Integrated Webcam: always reports core events
[ 21.331] (**) evdev: Integrated Webcam: Device: "/dev/input/event11"
[ 21.331] (--) evdev: Integrated Webcam: Vendor 0xc45 Product 0x63e0
[ 21.331] (--) evdev: Integrated Webcam: Found keys
[ 21.331] (II) evdev: Integrated Webcam: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11/event11"
[ 21.331] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 10)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.332] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.332] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.332] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.332] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.332] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 21.332] (**) Option "xkb_rules" "evdev"
[ 21.332] (**) Option "xkb_model" "evdev"
[ 21.332] (**) Option "xkb_layout" "us"
[ 21.333] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.333] (II) No input driver specified, ignoring this device.
[ 21.333] (II) This device may have been added with another device file.
[ 21.333] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 21.333] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.333] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 21.333] (**) Dell WMI hotkeys: always reports core events
[ 21.333] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 21.333] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 21.333] (--) evdev: Dell WMI hotkeys: Found keys
[ 21.333] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 21.333] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 21.333] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 21.333] (**) Option "xkb_rules" "evdev"
[ 21.333] (**) Option "xkb_model" "evdev"
[ 21.333] (**) Option "xkb_layout" "us"
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event12)
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[ 39.462] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event12"
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:46/input12/event12"
[ 39.462] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 13)
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[ 39.462] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse0)
[ 39.462] (II) No input driver specified, ignoring this device.
[ 39.462] (II) This device may have been added with another device file.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120414 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Vostro1510/0G914C, BIOS A10 07/10/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f76f0] f76f0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bfeca000-bfed0000
[ 0.000000] RAMDISK: 37a4e000 - 37d1f000
[ 0.000000] ACPI: RSDP 00000000000f7670 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bfed689a 0008C (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedecd6 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed7db1 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: APIC 00000000bfededca 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bfedee32 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedee6a 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bfedeea6 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedeed8 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: OSFR 00000000bfedeefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC 00000000bfedef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed7b04 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6eb2 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6e0c 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6926 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048159
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765712 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027674
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046772k/5242880k available (4495k kernel code, 1050244k absent, 145864k reserved, 4327k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2493.737 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.28 BogoMIPS (lpj=8312456)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003366] Security Framework initialized
[ 0.003372] AppArmor: AppArmor disabled by boot time parameter
[ 0.003684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007297] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008428] Mount-cache hash table entries: 256
[ 0.008584] Initializing cgroup subsys cpuacct
[ 0.008587] Initializing cgroup subsys memory
[ 0.008597] Initializing cgroup subsys devices
[ 0.008599] Initializing cgroup subsys freezer
[ 0.008601] Initializing cgroup subsys net_cls
[ 0.008603] Initializing cgroup subsys blkio
[ 0.008639] CPU: Physical Processor ID: 0
[ 0.008640] CPU: Processor Core ID: 0
[ 0.008642] mce: CPU supports 6 MCE banks
[ 0.008650] CPU0: Thermal monitoring handled by SMI
[ 0.008654] using mwait in idle threads.
[ 0.009761] ACPI: Core revision 20120111
[ 0.013342] ftrace: allocating 17484 entries in 69 pages
[ 0.020455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056107] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073465] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100006] Booting Node 0, Processors #1 Ok.
[ 0.100008] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.113362] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.119996] Brought up 2 CPUs
[ 0.119998] Total of 2 processors activated (9978.57 BogoMIPS).
[ 0.122938] devtmpfs: initialized
[ 0.124435] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
[ 0.124435] NET: Registered protocol family 16
[ 0.124435] ACPI: bus type pci registered
[ 0.124435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.124435] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.162520] PCI: Using configuration type 1 for base access
[ 0.162527] dmi type 0xB1 record - unknown flag
[ 0.163353] bio: create slab <bio-0> at 0
[ 0.163355] ACPI: Added _OSI(Module Device)
[ 0.163355] ACPI: Added _OSI(Processor Device)
[ 0.163357] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163358] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164422] ACPI: EC: Look up EC in DSDT
[ 0.170006] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.170470] ACPI: SSDT 00000000bfed7780 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170725] ACPI: Dynamic OEM Table Load:
[ 0.170728] ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170826] ACPI: SSDT 00000000bfed7111 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173475] ACPI: Dynamic OEM Table Load:
[ 0.173478] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173641] ACPI: SSDT 00000000bfed7a3c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173891] ACPI: Dynamic OEM Table Load:
[ 0.173893] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173957] ACPI: SSDT 00000000bfed76fb 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174201] ACPI: Dynamic OEM Table Load:
[ 0.174203] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174421] ACPI: Interpreter enabled
[ 0.174424] ACPI: (supports S0 S3 S4 S5)
[ 0.174439] ACPI: Using IOAPIC for interrupt routing
[ 0.237181] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.237303] ACPI: No dock devices found.
[ 0.237306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.237549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.237987] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.237990] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.237992] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.237994] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.237996] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.237998] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.238001] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.238003] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.238040] PCI host bridge to bus 0000:00
[ 0.238042] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.238044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.238046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.238048] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.238050] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.238051] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.238053] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.238055] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.238064] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.238108] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.238148] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.238200] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.238256] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.238299] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.238354] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.238409] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.238434] pci 0000:00:1a.7: reg 10: [mem 0xf8304800-0xf8304bff]
[ 0.238543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.238576] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.238597] pci 0000:00:1b.0: reg 10: [mem 0xf8300000-0xf8303fff 64bit]
[ 0.238698] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238730] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.238838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238872] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.238980] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.239015] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.239123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.239156] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.239264] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.239296] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.239351] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.239393] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.239449] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.239490] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.239544] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.239600] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.239624] pci 0000:00:1d.7: reg 10: [mem 0xf8304c00-0xf8304fff]
[ 0.239733] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.239759] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.239854] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.239962] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.239968] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.239972] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.239976] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.240040] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.240056] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.240069] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.240081] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.240092] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.240105] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.240159] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.240185] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.240196] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.240208] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.240220] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.240231] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.240243] pci 0000:00:1f.2: reg 24: [mem 0xf8304000-0xf83047ff]
[ 0.240307] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.240331] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.240347] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.240387] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.240474] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
[ 0.240494] pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
[ 0.240515] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240536] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
[ 0.240551] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.240565] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.240669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.240672] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.240675] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.240679] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240738] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.240743] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.240747] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.240755] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.240815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.240819] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.240824] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.240831] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.241146] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280
[ 0.241215] pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit]
[ 0.241595] pci 0000:06:00.0: supports D1 D2
[ 0.241597] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.241777] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.241782] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.241786] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.241793] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.241928] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[ 0.241988] pci 0000:07:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.242097] pci 0000:07:00.0: reg 18: [mem 0xf8410000-0xf8410fff 64bit pref]
[ 0.242168] pci 0000:07:00.0: reg 20: [mem 0xf8400000-0xf840ffff 64bit pref]
[ 0.242213] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.242482] pci 0000:07:00.0: supports D1 D2
[ 0.242484] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242650] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.242654] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.242665] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.242717] pci 0000:08:05.0: [1217:00f7] type 0 class 0x000c00
[ 0.242738] pci 0000:08:05.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.242750] pci 0000:08:05.0: reg 14: [mem 0xf8002000-0xf80027ff]
[ 0.242837] pci 0000:08:05.0: supports D1 D2
[ 0.242839] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242866] pci 0000:08:05.2: [1217:7120] type 0 class 0x000805
[ 0.242891] pci 0000:08:05.2: reg 10: [mem 0xf8002800-0xf80028ff]
[ 0.243002] pci 0000:08:05.2: supports D1 D2
[ 0.243004] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243031] pci 0000:08:05.3: [1217:7130] type 0 class 0x000180
[ 0.243055] pci 0000:08:05.3: reg 10: [mem 0xf8001000-0xf8001fff]
[ 0.243168] pci 0000:08:05.3: supports D1 D2
[ 0.243170] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243235] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.243243] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.243250] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.243253] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.243255] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.243257] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.243259] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.243261] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.243263] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.243265] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.243301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.243423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.243461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.243493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.243526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.243558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.243610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.243650] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.243652] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.243654] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.247869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.247912] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.247952] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.247991] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248029] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.248068] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248106] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.248145] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.248198] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248198] vgaarb: loaded
[ 0.248198] vgaarb: bridge control possible 0000:01:00.0
[ 0.248198] PCI: Using ACPI for IRQ routing
[ 0.259277] PCI: pci_cache_line_size set to 64 bytes
[ 0.259762] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.259764] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.259862] NetLabel: Initializing
[ 0.259864] NetLabel: domain hash size = 128
[ 0.259865] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259877] NetLabel: unlabeled traffic allowed by default
[ 0.259881] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.259886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.259890] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.269997] Switching to clocksource hpet
[ 0.276375] pnp: PnP ACPI init
[ 0.276393] ACPI: bus type pnp registered
[ 0.276659] pnp 00:00: [bus 00-ff]
[ 0.276661] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.276676] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.276678] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.276680] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.276681] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.276683] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.276685] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.276687] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.276689] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.276691] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.276692] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.276694] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.276696] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.276698] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.276700] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.276702] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.276704] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.276705] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.276707] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.276713] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.276771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.276835] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.276837] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.276839] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.276840] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.276842] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.276843] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.276845] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.276847] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.276900] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.276902] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.276904] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.276907] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.276909] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.276911] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.276913] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.276915] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.276918] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277064] pnp 00:02: [io 0x0000-0x001f]
[ 0.277066] pnp 00:02: [io 0x0081-0x0091]
[ 0.277068] pnp 00:02: [io 0x0093-0x009f]
[ 0.277069] pnp 00:02: [io 0x00c0-0x00df]
[ 0.277071] pnp 00:02: [dma 4]
[ 0.277108] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277116] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.277151] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.277208] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.277259] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.277262] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.277271] pnp 00:05: [io 0x00f0]
[ 0.277281] pnp 00:05: [irq 13]
[ 0.277318] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.277328] pnp 00:06: [io 0x002e-0x002f]
[ 0.277329] pnp 00:06: [io 0x0061]
[ 0.277331] pnp 00:06: [io 0x0063]
[ 0.277332] pnp 00:06: [io 0x0065]
[ 0.277334] pnp 00:06: [io 0x0067]
[ 0.277335] pnp 00:06: [io 0x0080]
[ 0.277337] pnp 00:06: [io 0x0092]
[ 0.277338] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.277340] pnp 00:06: [io 0x0680-0x069f]
[ 0.277342] pnp 00:06: [io 0x0800-0x080f]
[ 0.277343] pnp 00:06: [io 0x1000-0x107f]
[ 0.277345] pnp 00:06: [io 0x1180-0x11bf]
[ 0.277346] pnp 00:06: [io 0xfe00]
[ 0.277348] pnp 00:06: [io 0xff00-0xff7f]
[ 0.277409] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.277412] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.277414] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.277416] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.277418] system 00:06: [io 0xfe00] has been reserved
[ 0.277420] system 00:06: [io 0xff00-0xff7f] has been reserved
[ 0.277423] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277431] pnp 00:07: [io 0x0070-0x0077]
[ 0.277436] pnp 00:07: [irq 8]
[ 0.277471] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303369] pnp 00:08: [io 0x0060]
[ 0.303371] pnp 00:08: [io 0x0064]
[ 0.303376] pnp 00:08: [irq 1]
[ 0.303417] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303428] pnp 00:09: [irq 12]
[ 0.303469] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.303485] pnp: PnP ACPI: found 10 devices
[ 0.303486] ACPI: ACPI bus type pnp unregistered
[ 0.310427] PCI: max bus depth: 1 pci_try_num: 2
[ 0.310483] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4000000-0xc40fffff]
[ 0.310487] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4100000-0xc41000ff]
[ 0.310493] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4200000-0xc46fffff]
[ 0.310497] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.310499] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.310502] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.310505] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.310508] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310512] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.310515] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.310521] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.310526] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310533] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.310536] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.310542] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.310546] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310554] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.310557] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.310563] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.310568] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310576] pci 0000:07:00.0: BAR 6: assigned [mem 0xf8420000-0xf842ffff pref]
[ 0.310578] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.310581] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.310587] pci 0000:00:1c.4: bridge window [mem 0xc4200000-0xc46fffff]
[ 0.310592] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310600] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.310606] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.310656] pci 0000:00:1e.0: setting latency timer to 64
[ 0.310660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310666] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310668] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310670] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310676] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.310677] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[ 0.310679] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310682] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.310684] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
[ 0.310686] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310688] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.310689] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.310691] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310694] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.310695] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.310697] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310700] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.310701] pci_bus 0000:07: resource 1 [mem 0xc4200000-0xc46fffff]
[ 0.310703] pci_bus 0000:07: resource 2 [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.310708] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.310710] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.310712] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310713] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310715] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310717] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310719] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310721] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310755] NET: Registered protocol family 2
[ 0.310880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.311982] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.316195] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.316791] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.316793] TCP reno registered
[ 0.316803] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316846] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316995] NET: Registered protocol family 1
[ 0.317267] pci 0000:01:00.0: Boot video device
[ 0.317481] PCI: CLS 64 bytes, default 64
[ 0.317536] Unpacking initramfs...
[ 0.374501] Freeing initrd memory: 2884k freed
[ 0.375594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.375597] Placing 64MB software IO TLB between ffff8800bbeca000 - ffff8800bfeca000
[ 0.375598] software IO TLB at phys 0xbbeca000 - 0xbfeca000
[ 0.375610] Simple Boot Flag at 0x36 set to 0x1
[ 0.376082] audit: initializing netlink socket (disabled)
[ 0.376096] type=2000 audit(1335390677.373:1): initialized
[ 0.376634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.378819] VFS: Disk quotas dquot_6.5.2
[ 0.378870] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.378959] msgmni has been set to 7909
[ 0.379145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.379175] io scheduler noop registered
[ 0.379177] io scheduler deadline registered
[ 0.379231] io scheduler cfq registered (default)
[ 0.379359] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.379463] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.379588] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.379715] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.379842] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.379986] vesafb: mode is 1440x900x32, linelength=5760, pages=0
[ 0.379988] vesafb: scrolling: redraw
[ 0.379990] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.380871] vesafb: framebuffer at 0xc9000000, mapped to 0xffffc90011100000, using 5120k, total 5120k
[ 0.459332] Console: switching to colour frame buffer device 180x56
[ 0.537533] fb0: VESA VGA frame buffer device
[ 0.537543] intel_idle: MWAIT substates: 0x3122220
[ 0.537545] intel_idle: does not run on family 6 model 23
[ 0.537589] GHES: HEST is not enabled!
[ 0.537656] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538109] Linux agpgart interface v0.103
[ 0.538184] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.549069] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.549174] mousedev: PS/2 mouse device common for all mice
[ 0.551979] rtc_cmos 00:07: RTC can wake from S4
[ 0.552091] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.552123] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.552132] cpuidle: using governor ladder
[ 0.552134] cpuidle: using governor menu
[ 0.552324] TCP cubic registered
[ 0.552326] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.552329] NET: Registered protocol family 17
[ 0.552341] Registering the dns_resolver key type
[ 0.552449] PM: Hibernation image not present or could not be loaded.
[ 0.552454] registered taskstats version 1
[ 0.560521] rtc_cmos 00:07: setting system clock to 2012-04-25 21:51:18 UTC (1335390678)
[ 0.560570] Initializing network drop monitor service
[ 0.565560] Freeing unused kernel memory: 732k freed
[ 0.565880] Write protecting the kernel read-only data: 8192k
[ 0.570360] Freeing unused kernel memory: 1632k freed
[ 0.572877] Freeing unused kernel memory: 656k freed
[ 0.579734] udevd[38]: starting version 182
[ 0.593304] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.607088] usbcore: registered new interface driver usbfs
[ 0.607172] usbcore: registered new interface driver hub
[ 0.608132] usbcore: registered new device driver usb
[ 0.608499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.608564] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.608568] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.608591] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.608626] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.612504] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.612523] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
[ 0.614670] SCSI subsystem initialized
[ 0.616861] libata version 3.00 loaded.
[ 0.617667] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.620033] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.620307] hub 1-0:1.0: USB hub found
[ 0.620312] hub 1-0:1.0: 4 ports detected
[ 0.620479] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.620483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.620496] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.620528] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.624409] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.624427] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
[ 0.633354] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.633512] hub 2-0:1.0: USB hub found
[ 0.633516] hub 2-0:1.0: 6 ports detected
[ 0.633616] ata_piix 0000:00:1f.1: version 2.13
[ 0.633651] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634377] scsi0 : ata_piix
[ 0.635315] scsi1 : ata_piix
[ 0.635744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.635747] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.635809] uhci_hcd

hi all,
I was able to fax and get a connection now. My next question is, in the network preference I see the internal modem red dot showing it's configured but not connected. Shouldn't it be green or does it matter? Your input will greatly be appreciated.
Web dude

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

[Potentially Solved] Touchpad sometimes not detected possible IRQ.

Edit:
Potentially solved: since adding the below entries to my bootloader I have not encountered the issue, or it may be just a coincidence.
append to the boot line: i8042.nomux=1 i8042.reset
I've been experiencing an issue for the last few years which has bugged me across two different brands of laptop, but has been very hard to debug due to how random the event seems to occur.
One in every 20 or so boots, the touchpad on my laptop (Lenovo Z500) is not detected; not just by X, but by the system as a whole, it's as if it has been physically disconnected somehow.
It will take a few good reboots for the system to detect it again, and the problem disappears for another few days/weeks
One strange thing I have noticed, is that when looking at the listing of interrupts during a 'failed touchpad boot', IRQ 12, which I believe is normally the touchpad, has vanished.
I'm not very clued up on these matters so I'm not sure how to start debugging this, and working out if the issue is down to my setup of the system or not.
Any ideas on what could be causing this?
Thanks.
Output of /proc/interrupts during a working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 16 723 9 10 IO-APIC-edge i8042
8: 0 0 0 1 IO-APIC-edge rtc0
9: 299 118 10 14 IO-APIC-fasteoi acpi
12: 845 21415 146 77 IO-APIC-edge i8042
16: 461 8993 74 44 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 2 25 5 1 IO-APIC-fasteoi ehci_hcd:usb2
41: 5 22 0 2 PCI-MSI-edge xhci_hcd
42: 1557 1065 596 500 PCI-MSI-edge ahci
43: 11 2 0 0 PCI-MSI-edge mei_me
44: 266 0 0 0 PCI-MSI-edge snd_hda_intel
46: 4 28 26 1 PCI-MSI-edge i915
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 3002 12958 2572 1842 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 88 170 115 197 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 367 332 393 431 Rescheduling interrupts
CAL: 129 71 24 58 Function call interrupts
TLB: 99 72 157 892 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/interrupts during a non-working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 9 235 2 11 IO-APIC-edge i8042
8: 0 0 1 0 IO-APIC-edge rtc0
9: 217 44 24 40 IO-APIC-fasteoi acpi
16: 96 2512 38 173 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 3 25 1 4 IO-APIC-fasteoi ehci_hcd:usb2
41: 6 23 0 1 PCI-MSI-edge xhci_hcd
42: 1445 937 649 479 PCI-MSI-edge ahci
43: 9 3 0 1 PCI-MSI-edge mei_me
45: 11 10 4 39 PCI-MSI-edge i915
46: 93 80 94 0 PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 1251 3465 1964 692 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 76 97 47 79 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 349 252 190 335 Rescheduling interrupts
CAL: 110 72 30 69 Function call interrupts
TLB: 101 52 817 651 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/bus/input/devices during a working boot (touchpad detected at bus 0011):
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input5
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=event11 mouse0
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input13
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input14
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
Output of /proc/bus/input/devices during a non-working boot:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input6
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input8
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140
Last edited by kYd (2014-07-01 18:11:45)

Hi gav989,
welcome to the forums. Please have a look at our forum etiquette, esp. at the "Pasting Pictures and Code" section.
The image you posted is too big, but only slightly, so I leave it there for now. You may want to look at these screenshot posting rules as well.

New battery is not detected on Satellite A300

Hello every body
I had this problem with my laptop Satellite A300 (PSAJ4E). I bought a new battery and started my laptop. I have Windows Vista.
The battery is not detected. When I remove the charger its work well but with indicator of low battery so Im update my BIOS but the problem is still there.
So I look around and tried to disable Microsoft in device manger.
Still not fixed properly. I removed charger and insert it again.
It shows the AC power supply but no charge.

hi king_soft,
sold a third party battery?
in some cases the used controller (battery) is not recognised by your system...
you can try this (without any promisses):
shut down notebook, remove battery, connect ac-adapter and make sure unit is powered
insert battery and wait 24hours
disconnect ac-adapter and remove battery
switch machine on to make it fully discharged (some components holding electricity)
insert battery and start the unit
check powermanager or energy options if the battery is recognised...
never open up a battery pack - it's really dangerous!
if the battery pack is recognised by the system - you won!
if not make sure that your ac-adapter supplies the right voltage/current to your system
test another battery to make sure the loading device (notebook) is working properly
if so exchange battery pack!
editing: found a info that the highest rated cpu is a Intel Celeron -M 380 (1.60GHz)
Message was edited by: Al-eX

Satellite L50T-A - Touchpad not detected

Similar Messages

Maybe you are looking for