Satellite L555-10R Connect with TV

Hi there,
What kind of cable do i need to connect my laptop with the television?

Hi Dion,
I think its depending on the connector which cable you need... For example you can use a HDMI cable because it has the best picture quality and can transfer audio signal too.
You can get a HDMI cable from everywhere. Just search a little bit through Internet or ask your favorite computer shop.
Furthermore you should connect the cable firstly before you power on both devices. Using FN+F5 key combination you can switch too external monitor or TV. :)

Similar Messages

Satellite T110-10R with Realtek 8187se - connection drops on battery

Hi my friends,
there is a big issue with my laptop.
wlan signal strength: very good
other laptops do not have these issues in this network.
so, here my problem:
on AC mode, there are no problems with the wireless connection, but on battery mode, my wlan keeps on disconnecting, connecting, disconnecting, connecting... sometimes, this happens several times in one single minute! this is quite painful and annoying.
this happens with different wireless network, tried it on different ones - not just my home network
my system:
Toshiba Satellite T110-10R with Realtek 8187se
Windows7 64bit.
here a short overview on things i already tried
-BIOS updated !
-driver updated !
-OS reinstalled !
-power options: max performance
-even in all power options, i set max performance for the wireless adapter settings, on battery, too
-properties of the wlan card in device manager, i disabled the option : allow the computer to turn off this device to save power
-in the same window, advanced, 802.11d activated
well,despite of the fact, that i have this issue on my home network AND on other networks, i tried following things on my router at home:
-firmware updated
-device reset
-no automatic ip (dont know the correct english term) - this i set on my laptop, too
-wlan changed to 802.11 b, g, b and g, also tried wep
-wlan channel adjusted to auto and not auto, trying different channels
-disabled all power saving functions
... as you can see, i tried everything I KNOW..
maybe, you guys have something for me i did not think on...
well, i hope, somebody can help me with this problem...

hi guys,
there is a big news on my thread.
i still have the issue but JUST ON my wifi-lan at home.! I again tested my problem on other networks and i had no problems on those ones.
Well:
my router at home:
fritzbox 7110
-firmware updated
-device reset
-no automatic ip (dont know the correct english term) - this i set on my laptop, too
-wlan changed to 802.11 b, g, b and g, also tried wep
-wlan channel adjusted to auto and not auto, trying different channels
-disabled all power saving functions
maybe now somebody could help me?!?!
Are there known issues with realtek and fritzbox devices?
other device/laptops dont have any problems with this router!
just my toshiba with realtek wlan adapter
bye

Connect Satellite L555 to older Emerson TV

Is it possible to connect my L555 laptop to an older Emerson TV? Appears the laptop has a VGA output port and the TV has seperate S-Video & S-Audio ports?

The Satellite L555-12V for example support an RGB (VGA out ) external monitor output.
This means that you can connect an external monitor to this notebook.
Furthermore the notebook supports HDMI out port (not sure if your notebook support the HDMI as well) but HDMI port can be used to connect an LCD, plasma or LED TV to the notebook.
But the old TV cannot be connected to the HDMI port so you will need to use the VGA out port. I think you will need a kind of adapter to get the video out on TV.
Search in the internet for *VGA and S-Video Adapter-Cable.*
You will need such part.

Adobe connect with satellite

Hi,
I teach classes using adobe connect. We are thinking of moving out in the country to an area that can only get satellite internet. Do any of you know if it is possible to use adobe connect with satellite? I called the help line and asked but they could only say that they don't recommend it, but they don't really know. The area has two providers, hughes and wildblue. Anyone have any experience with this?
Thanks,
Teresa

Let's be clear about consumer satellite internet versus commercial and military grade. These are completely different worlds. Understand that Adobe Connect is designed for and sold specifically to corporations, governernment agencies and universities. In that light, most of the target customer set would be using commercial grade internet connections. However, some proportion of users would be on consumer grade connections like DirecTV (now HugesNet). Having supported HughesNet while I worked at IBM in this space, they have lots of different connection types for universities and enterprise customers. Most of these customers have selected speeds that will work with any web conference solution. Having been a customer of HughesNet there are several consumer grade speeds and it would be best to have the higher speed version. The US Goverment has their own satelite netwrok and they use Connect all the time that way. Now, that being said understand that satelite networks have a very large latency factor that will affect the quality of any web conference. Latency is not really a problem except when you try to share webcams, video or MP3 files via Connect. The military tries to minimize the use of these multi-media types because latency affects the quality of the video. It can get quite choppy no matter what web conference you use because of the video needing a lot of bandwidth back and forth.
So. let the buyer beware but if you have no other option than satellite pay the extra dollars for the highest package you can get.
Another option might be celluar 3G or 4LTE. Adobe Connect works great on cellular networks so don't forget to see if that is an option. Might not be if the data plans limit the traffic though!
Hope that helps.

Satellite M30-154 cant connect with wireless internet (wifi)

hello,
i did a product recovery on my m30-154 a couple of days ago, and now he doesnt connect with the wireless internet we have in our house. he sees the SSID but he just dont connect, i allready did a BIOS update and an Intel update and I dont dont know what to do now. Can somebody help me?
cheers

> he sees the SSID but he just dont connect
The SSID is secured. Right?
Can you connect to open Wlan?

Satellite U840W-10R Problems connecting an extra display HDMI

Hello!
I need support, I'm getting CRAZY!
I bought an screen 27" to connect via HDMI to my laptop, I tried in the store and the display worked straight ahead just connecting the HDMI.
They sent me a few days later a brand new one, and for my surprise it doesn't work.
I know that my laptop works perfectly fine, I connect it regularly to the TV, using the same cable, and the screen works with other computers.
I found in Toshiba's website an update for display drivers, Intel (R) HD Graphics.
Right after the installation of this drivers the screen works!
I can see the duplicate of the image, no issue, but then, I have to restart the computer to save the changes.
Upon the restart, the image isn't seen any more, Intel Graphics doesn't recognize any other output, the screen shows a clear message that there's not HDMI signal coming.
if I reinstall the drivers, the screen comes to life again, only delaying the restart action I get it to work for a while. In the last try I made it didn't last longer than 15' about.
I've also looked into the website of Phillips (brand of the screen), found a pack to update the screen drivers for Windows 8. But my system answers that is all up to date...
SOS!

> I know that my laptop works perfectly fine, I connect it regularly to the TV
But you said the HDMI out works properly in connection with the TV. Right?
This means that HDMI out is OK.
I guess the issue is related to the monitor. There must be an issue with a signal which cannot be detected by HDMI out port....
Are there any power saving settings or something like that enabled on the external monitor?

Satellite L555-S7008 - cant install Intel Storage Manager for Win XP

I have installed XP on my laptop.
Everything works fine except that I cant put it into Ahci mode.
I Installed xp under compatability mode because I am supposed to be able to install the sata drivers by running Intel Storage Manager.
I have tried the version on this website as well as one from Intel, and they both stop with the error
"Your computer is not does not meet the minimum requirements for this software".
I have also gathered that I can extract the drivers from this package, and install them manually,
however when i try, it say drivers extracted successfully, yet nothing is extracted.
Can someone please help me get the Storage manager to install so I can run Ahci mode.

Hi
Satellite L555-S7008 belongs to the Toshiba US series.
You have to download the drivers from the Toshiba US driver page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
There is a Intel Storage Manger:
Intel Matrix Storage Manager for Windows XP/Vista/7 (32/64)(v8.9.0.1023; 10-23-2009; 4.25M)
You will need to set SATA to AHCI before including this to the Win XP setup.

Slow dial up Internet connection with Internal modem

I just bought a Mac G4 with dual 1.25 gig processors and internal modem for my dial up connection to the Internet. My modem connect speed is 28.8K and max through put on a session is 19K.
I can use any of 3 Windows/PC's and plug them into the same phone jack and get a solid 50.6K connection with a max through put of 49K. Get basically the same connect speeds with a Windows Laptop
Any thoughts of what may be the problem with the Mac Internal modem and such a slow connect speed.
Would buying an external modem with its own processor help me in better connect speeds. Simply at 28.8K the Mac is next to useless on the web.
My home is all wired with Cat 5e, all jacks are a direct run to the punch down block.
My goal is to switch my business to all Mac's, but I need to get the connect problem resolved first.
Thank You
wm300

My girlfriend lives in a hill town in a fairly wooded mountain road. She cannot get broadband or DSL either, and the town will, probably never get it. She has satellite, and when it's working well it's great, but in bad weather or cloudy days, the reception is spotty and the satellite provider charges mucho buck for their satellite high speed internet acesss.
So, she has no choice but to rely on the town's phone lines and basically is stuck with dial-up. Unfortunately, the town's phone lines are very old and are analog lines with no digital support. The fastest she can ever achieve is 28k to 30K speeds. Panifully slow dial-up and even small downloads are an experience in patience and time.
Maybe call the phone company to check what kind of phone lines your town or surrounding towns are using.
And if they know what data transfer speeds the lines support
Also, a thought.
If this Mac was not purchased new, but as a refurbished or used Mac, it could've had a "new" slower modem installed because the original failed and a identical spec'd modem was not installed.
I have a single 1.25 Ghz MDD and has a V.92 56K internal modem and I just found out my town's phone lines can support a 125k data transfer or "high speed dial-up". Unfortunately, for some unknown reason, my 56K will only get me to transfer speeds of between 44k and 48. Not sure if this is fault of my modem, accessing my ISP as the dial-up number dials into a tower at least 20 miles away and my ISP's server is over 40 miles away.
My brother came to visit and his PC laptop could dial-in to his ISP and was able to get transfer speeds of 100k to 120k.
Again, not sure if this was because of a faster modem or not.
You would think that if the phone line in my area can support 128k speeds that my modem should be tapping in and operating at 50k spedds or close to the modem's max of 56k.
This is a stumper becuase I am considering looking for a high speed dial-up provider to replace my current ISP, but if my modem won't clock to any faster than 44k or 48k , I think this would be a waste of my efforts and money.
If anyone can help me shed some light on my situation, this will help me out, as well.

Solman connection with DEV + prodcution server

Dear friends,
Pls give the link for
1. SOLMAN configuration .... connection with DEVELOPMENT server and PRODUCTION server
2. Then .. if any document or pdf is uploaded in Development .. It is also display in SOLMAN.
thanks
Lee

Dear Lee,
Here are the steps to connect an Satellite System to Solman applicable to both Dev and Prd Systems :
1. Create the Server / Database / System Component in transaction SMSY (
Landscape Components ) to define the system to Solman. In the System component ensure that you have generated RFC's to the relevant clients of the satellite system using the Generate RFC function.
2. Then in transaction SMSY itself , Create an Logical Component for the product amd product version of the system and assign the system to the logical component as per the logical role of the system like DEV / QAS / PRD.
3. Then Create an Solution in transaction DSWP and add the Logical component to the Solution in the Solution Settings.
Bingo. Here you are set to either setup system monitoring for the satellite system or to generate EWA's for the satellite system or to configure Service desk and all other related scenarios.
I hope these steps help you configure Solman.
Regards
Amit

Satellite L555-S7008 - Can't install Windows 7 display driver

Hi Guys
I'm confused now
I have a Satellite L555-S7008, I Installed a Windows 7 ultimate edition but unfortunately the display driver didnt work. Now I have Pain in my eys because of the resolution. What should I do in order to make it work?
Hardware detected "Mobile Intel(R) 4 Series Express Chipset Family" but it doesnt support this type of hardware
2) What driver should I installed for PCI Network communication controller?

Thanks for ur reply freind
I Followed the Below but with no success:
* Microsoft Windows* Vista / Win7 "Have Disk" Installation Instructions
1. Click "Start" then right click on "Computer" button and select properties.
2. Click on the "Device Manager" selection on the left.
3. IF UPDATING DRIVER GO TO STEP 5
4. Double click "Video Controller (VGA Compatible)" if present under "Other Devices". (Go To STEP 6)
5. Select "Display adapters" then double click on the graphics controller shown.
6. Click on "driver" tab and select "Update Driver".
7. select the following option: "Browse my computer for driver software"
8. Select the following option: "Let me pick from a list of device drivers
on my computer".
9. Click on the "Have Disk..." button and then the "Browse" button
10. Enter the directory where you unzipped the file you downloaded,
and then enter the "Graphics" subdirectory. Highlight "igdlh.INF"
file. Click on the "Open" button
11. Click on the "OK" button and then click "Next" button. The operating system will install the driver.
12. Click on the "Close" button and then click on the "Yes"
button to reboot. The driver should now be loaded.
But I Noted that the file "igdlh.INF" is not in the directory as i found inside it this" kit19757.inf""
Pls help freind,Realy i have pain in my eyes
Thanks

Satellite L505 - Wireless connection is slow

Curlie028,
I'm having the same problem with a brand new Toshiba Satellite L505 - Windows 7 64-bit with the Realtek RTL8191SE Wireless NIC.
I've tried EVERYTHING.
[http://www.dslreports.com/speedtests/] starts out at about 1480 kbps dowload speed then rapidly drops to less than 300 kbps. LAN cable gives 1480 kbps download speed all the time on my DSL connection. But when I use the Realtek wireless NIC, the speed starts out fast, then tapers quickly to < 300 kbps.
My daughter has a Satellite A500 (not L500) with a different wireless adapter. Sitting side by side anywhere in the house, her laptop, when accessing the same wireless router, always enjoys nearly 1500 kbps as measured by www.dslreports.com/speedtests/ - but not so with my laptop!
I've done all I can to investigate this on my own - much like you - driver updates, BIOS update, turning off all the Norton Internet Security Suite stuff, different browsers, you name it.
I've even tried modifying the "netsh int tcp set global" parameters, running the speedtest repeatededly as I made changes following the steps outlined at this website: [http://www.speedguide.net/read_articles.php?id=2574]
The only thing left to do is to call Toshiba Support and start riding them relentlessly until something gives.... I don't want to return the laptop. I want them to FIX THE PROBLEM!
Mike

Hi buddy,
You wrote that you tried everything like driver update, etc.
But it would be interesting to know which driver you have installed. Please install the latest WLAN driver from the official Toshiba page and not from Realtek directly. All drivers from the Toshiba page are pretested for your notebook.
Check this!!!
Furthermore it would be interesting to know if you run factory settings or your own Windows installation.
The Norton Internet Security software isnt so fast. I would recommend uninstalling it and choosing another AntiVirus like AntiVir. The Firewall you can use the Windows one.

Slow connection with build in WiFi card

I have a wanadoo family adsl internet 20 mbit connection with a live box. The live box is also a wireless router.
When i connect to the livebox wiht my toshiba mx40-231 the connection is very slow. The connection is constantly switching between 1mbps and 54 mbps and speeds between.This is also the problem. One moment a internet page is send in 1/10 of a seccond and 1 minute later a page is loading in 20 secconds! the strang thing is that the signal strength is constant high!
With the live box i got also a USB wireless stick. when i use this stick i get a constant 54 mbps very very fast connection.
It seems to me the build in wireless card is the problem. I have already the latest wireless driver and tried a few channels on the router.
Anyone got a idea to solve this problem so i can throw this wireless stick away :-) Very clumpsy thing this wireless stich on such a beautifull laptop!

Hi
If you check wireless board you will find many topics about this theme. It is known that Intel wireless card 2200 B/G make troubles and connection is not constant. We can just speculate why this happen but the fact is that this card has problems with different routers.
For example: Satellite M40 has the same card and work fantastic with Netgear router. Even with Belkin it works well with full speed.
I recommend you to install latest Intel driver
Good luck

Satellite L555-12V - Touchpad doesn't using Win 7 64bit

I bought the laptop with Windows 7 home premium.
Then I installed Windows 7 ultimate 64 bit and my touchpad doesnt work anymore.
I tried everything. I have the original drivers for 64 bit
When I make the auto detecting on the Toshiba page it shows me that I have a Satellite A200-17O. :/
Sorry for my English :D
mfg

So what notebook do you have exactly?
Satellite L555 or Satellite A200-17O?
Did you check the device manager if the touchpad would appear as unknown device or as installed devices with an yellow exclamation mark??
I think its driver related issue but from my knowledge the touchpad should work and you should be able to use it even the drivers have not been installed.
Did you check if the touchpad is not disabled? Check it using the option FN+F9

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Untrusted server cert chain - while connecting with ldap

Hi All,
I am getting the following error while running a standalone java program in windows 2000+jdk1.3 environment to connect with LDAP.
javax.naming.CommunicationException: hostname:636 [Root exception is ja
vax.net.ssl.SSLException: untrusted server cert chain]
javax.naming.CommunicationException: hostname:636. Root exception is j
avax.net.ssl.SSLException: untrusted server cert chain
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(DashoA12
275)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.OutputStream.write(Unknown Source)
at com.sun.jndi.ldap.Connection.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapClient.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
at Test2.getProxyDirContext(Test2.java:66)
at Test2.main(Test2.java:40)
Any help would be appreciated
Thanks in Advance
Somu

This got resolved when in the code the following
System.setProperty("javax.net.ssl.tmrustStore", CertFileName);
where cert file name is the filename with complete path.the file is a CA certificate of the LDAP server
in X509 format

Satellite L555-10R Connect with TV

Similar Messages

Maybe you are looking for