Satellite L635-10P - Stuck with system repair and blue screen

Help!
I have a satellite L635-10p with Windows 7. Windows does not load, getting blue screen after the 4 colorful glow bug, windows icon. Safe mode also resulting in blue screen
System repair is stuck in a black screen with movable cursor (white arrow).
Do not have recovery disk. misplaced it. lost.
please advise:
1. how I may get the data, document files from the desktop?
2. how to fix this?
thanx

Hi there,
If you don't have Windows DVD then i advise you to download Ubuntu Live CD. You can run it without installing it, and you can backup you data from there.
If you have DVD with Windows on it, insert it and wait for it to load. When it loads then hit "Other options" or something like that or maybe "Advanced" and there you will find "Command Prompt" hit it and in the console type "notepad.exe". Why you may ask, well you will get Notepad window and you can browse your hard drive and copy and paste data. If you can't see all files just be sure to select "All Files" in File types. That's the way I backup up my data.
2. What is the error on the blue screen ? Have you tried to Google for it ?
Regards Strahinja.

Similar Messages

System freeze and blue screen, help!

Hi guys,
Hopefully I can get some help on this...
I have a 2011 17inch MacBook Pro, intel core i7, 2.2Ghz, 4mb ram.
I've been having issues with the system freezing, like the screen goes a bit pixely and unresponsive and I'm forced to do a hard shutdown. On one occasion it has frozen with a blank blue screen which is rather scary! Also it has been running slower than normal...
I had issues before and took it to the Genius Bar and had the logic board replaced as well as the hard drive, this was less than a month ago.
Any ideas??
Cheers

You have a 90 day warranty for Apple repairs. It sounds as if you're having problems with the GPU, soldered onto the logic board.
I would advise taking the machine back to the Apple Store/AASP that repaired the machine and have them fix the logic board problem.
Good luck,
Clinton

Issue with USB ports and Blue Screen

So, I had to send my Satellite L355-S7905 back and Toshiba had to do a factory restore. I got it back 2 weeks ago and now I have a new problem; 2-3 times a day my mouse and printer stops working, these are connected via USB ports and I get a message that the device is no longer recognized. I found a solution on the Microsoft site to go to Device manager and Scan for new hardware changes and then Restart. I do this and when I restart I get the dreaded blue screen. So I then have to unplug, take out the battery and turn the computer back on. Then the mouse and printer are recognized. This will work for several hours and then the whole thing happens again. So, are there any long term solutions? Can anyone tell my why this is happening? Please note, that that the printer and mouse are not new and no new hardware has been installed since getting it back from the factory.
Thank you for your help!!
Jennifer

start-->control panel-->system and security-->device manager-->expand the universal serial bus controllers-->right click and uninstall all of the USB root hubs-->restart-->they will reinstall on restart, and search for attached hardware.

ICloud backup is unable to access the account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete my account?

iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?

You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.

Stuck with the apple and the scrolling gear while booting

Hi there
i am using my mac for more than 2 years , i did not format it or even fix any thing into it but now something bad happend...
accdentaly my genius friend preesed the power putton for more than 5 seconds to start up the computer and i heared a sound and a the normal flashing light under the track pad and suddenly i was stuck with the apple gray booting screen and the scrooling gear and the computer does not go further .. i left for 2 hours and it still stuck with the same screen ... try to restart do any thing no results also ...
NOTE: THE BIG PROPLEM IS THAT I PUT A PASSWORD FOR THE FRIMWARE AND I FORGOOT IT SO I CAN NOT USE THE FOLLWOING:
1-the ability to use the "C" key to start up from an optical disc.
2-the ability to use the "N" key to start up from a NetBoot server.
3-the ability to use the "T" key to start up in Target Disk Mode (on computers that offer this feature).
4-Diagnostic volume of the Install DVD.
5-mode by pressing the Command-S key combination during startup.
6- a reset of Parameter RAM (PRAM) by pressing the Command-Option-P-R key combination during startup.
Requires the password to use the Startup Manager, accessed by pressing the Option key during startup (see below).
7- Safe mood.
8-Single mode acsses and the other one i forrgot its name.
SO I FIGURED THERE IS NO WAY BETER THAN THE PRIVIOUS WAYS TO SOLVE THE PROPLEM
IF YOU HAVE ANY IDEAS OR ANY THING SO I CAN FIX THIS THING ?
Thanks in advance >>>
iBook G4 Mid 2005 Mac OS X (10.4.8)

I was mistaken about the PMU..with a little more digging I found that Open Firmware password can be removed if you change the amount of memory installed.
I found this info here: http://archive.macosxlabs.org/documentation/firmwaresecurity/faqs/faqs.html#remove_passwordprotection
The following is a link from Apple's site to download the user's manual for your iBook:
http://manuals.info.apple.com/en/iBookG4(Mid2005)_UsersGuide.pdf
It provides the instructions to add or remove memory from the machine. If you do have additional memory installed then you'll be able to remove the memory, and reset the PRAM, that way your password is gone. Hopefully from there we can figure out and fix your startup issue.
Ben

Iphone stuck with apple symbol and wont start up

i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS

Lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!

My clone tool in Lr is stuck in the scissors mode. How do I get it back to normal clone function.
Spending hours with this FRUSTRATION.
CAN SOMEONE HELP ME?

DOWNLOADED 5.7 CAN'T POST CLIP BECAUSE WHEN i LET GO OF THE ALT KEY THEY DISAPPEAR.
      Fr5.7om: Bob Somrak <[email protected]>
To: Cat Anders <[email protected]>
Sent: Sunday, February 15, 2015 5:22 PM
Subject: lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!
lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!
created by Bob Somrak in Photoshop Lightroom - View the full discussionFirst thing to do is update to LR 5.7.1.     No use trying to solve a problem on an outdated version. BTW, could you post a screen clip of these SCISSORS? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7197183#7197183 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7197183#7197183 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

When i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour .

when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>

Wrong Forum

Try updating my ipad 2 ,came back with error 1602, and now my ipad is stuck with the itune and usb icon on the screen

Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.

See if this page helps http://support.apple.com/kb/TS3694#error1602

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

HT201412 my Ipad screen is stuck with Itunes logo and wont repsond

my Ipad screen is stuck with Itunes logo and wont repsond

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

Repeatedly getting stuck on spinning wheel and grey screen, even after multiple re-installs of the OS

Ok, so running Lion on a MacBook, (2010 i think) and the OS got corrupted(stuck on spinning wheel and grey screen on boot)
Tried to repair the disk via disk utility using an install CD, no go, couldn't repair, so, did a clean install.
New install went fine, computer worked for about 3 days and then stuck on the spinning wheel again.
suspecting physical damage to the harddrive, I installed the OS to an external, and booted from there. Worked for a couple days and then stuck on the spinning wheel.
I have repeated the process 5 times now, each time it works for a little and then craps out again.
What's going on?
as a note, when I say it gets stuck on the spinning wheel, I have left it for 12 hours trying to boot to no avail.

The Apple Hardware Test doesn't always detect all errors.
Next time you get the gray screen/spinning wheel, try booting into the Safe Mode to see if it will boot.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
Startup Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

Satellite L635-10P - Stuck with system repair and blue screen

Similar Messages

Maybe you are looking for