Satellite L650-10D - Unable to install any graphic driver

Hi,
I have just spend most of the day trying to get this laptop to use proper resolution. Story:
The HDD failed and I had to get a new one. I downloaded Windows 7 Home Premium and installed everything from the scratch on a new HDD. The serial from the back of the machine worked fine with the Windows (fortunately).
After downloading a lot of drivers from Toshiba website I got working everything except the Display. At the moment the Windows is using: "Standard VGA graphics driver" which can not go furher then 1024x768, very annoying.
Steps I tried:
1) I downloaded "tc70077100m" AMD driver from the website.
Installation of the ATI Catalyst went thru, but the drivers were not changed.
2) Double clicking on "tinstall" or "tinstallwb" in the unpacked driver directories resolves in briefly seeing the icon on task bar after which the installer exits, nothing else, no error. Very professional ...
3) I tried manually updating the driver using the Device Manger pointing to directly to the file from the package. First I got warning, that the driver is not compatible, but I forced it to continue. I picked "ATI Mobility Radeon HD 5650". The installation failed saying that my version of Windows is not compatible.
4) I also tried downloading drivers from ATI website, which failed each time saying my software/hardware was not compatible.
5) I also tried downloading drivers for other L650 notebooks (the Intel ones) which failed for incompatibility.
Please advice how can one install graphic driver on this device. I am not after gaming, I'd just like to get reasonable resolution.
Regards

Hi kotatko,
Your notebook is equipped with ATI graphic card so other display drivers like Intel will not work. You have to install the display driver from official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start with display driver installation make sure that *chipset driver* is installed. The chipset driver can be downloaded on Toshiba page too.
May I ask you why you dont use the Toshiba recovery disk with all drivers and tools that is more comfortable?

Similar Messages

Satellite L650-1M0 - CAN'T install new display driver

Hello!
I have Toshiba Satellite L650-1M0 and i CAN'T install new drivers to my graphic card: Mobility Radeon HD 5650 from the AMD site. Why i cannot do it? I want to install the latest display drivers because i have problems with display mode. My laptop is set on 16:9 but some programs display in 4:3.
Please give the latest drivers on the Toshiba site or tell me what should i do to download drivers from AMD site. I have Windows 7 64x ;).

>Why i cannot do it?
Im really wondering you are asking something like this. It is well known that support for mobile units (notebooks) is offered by notebook manufacturer and not by hardware manufacturer.
Due to specific notebook design and limited cooling performance graphic card cannot be upgraded as on graphic cards designed for desktops. New driver means more performance. More performance means more heat and result can be graphic card damage or switch-offs because of critical hardware temperature.

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Can anyone help me? I recently bought a secondhand PowerBook G4 but there was no installation discs, where can I obtain a set as I am unable to install any software. Many thanks.

I recently bought a secondhand PowerBook G4 but there were no installation discs with it and at present I am unable to install any software, where is it possible to obtain a set of the discs so that I can reinstall the software to try and resolve this problem.
Many thanks.

You may also want to try eBay. Finding disks for a machine that old will be difficult though.
Best of luck.

After installing Trend Macro antivirus, I was unable to install any plugins. I get an "Unexpected Installation Error" message at the end of the installation. Closing the anti-virus does not help.

I have purchased Trend Micro Titanium Maximum Security and am now unable to install any plugins. I have had these plugins before and had no trouble with them but now they have disappeared. I tried closing the antivirus and added mozilla.org to the exceptions list but it did not help.
I have copied the text of the error.
Firefox could not install the file at
https://addons.mozilla.org/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=search
because: Unexpected installation error
Review the Error Console log for more details.
-203

http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203

Unable to install any software on Nokia E5-00

Hi, I have updated my E5 software from .042.010 to .042.014 on 06/06/2011, after the updation I am unable to install any kind of software on my cellphone. At the time of installation, it somehow stop responding and I have to restart the phone to continue my work. Please advise what to do. RV

@rvdelhi
Although you would need to backup essential data first, it may be worth resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself).
Happy to have helped forum with a Support Ratio = 42.5

Unable to install any version of iTunes

Hi there,
I am unable to install any version of iTunes as I get this error message "C:\program files\itunes\mozilla plugins\npitunes.dll verify you have access to that directory"
Can anyone help please?
I don't even have Mozilla Firefox installed!

Follow the steps outlined in the KB article: http://docs.info.apple.com/article.html?artnum=93976 and then try to reinstall iTunes.
Rachyl

Unable to install any upgrades

I am unable to install any updates on my MBA with OS X 10.7.2. They all result in "An unexpected error occured". I have tried with lots of different updates, firware update, Lion update etc with the same result.
Any ideas?

The code below is from trying to install update "Airport Utility" version 6.0 from The standard OS X Software Update function. The user (me) is prompted with "An unexpected error occured". I have tried with EFI Firmware, Max OS X Update combined 10.7.3, All packages. The result is allways the same.
Thanks, Jesper
Feb 21 08:57:57 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x103c08c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x103c08ae0=disk0s3=Recovery HD
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fa05b116de0
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7fa059605b60
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
              ProductBuildVersion = 11C74;
              ProductCopyright = "1983-2011 Apple Inc.";
              ProductName = "Mac OS X";
              ProductUserVisibleVersion = "10.7.2";
              ProductVersion = "10.7.2";
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: Firmware is up to date.
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: model = MacBookAir4,2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:14: --- last message repeated 4 times ---
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:58:17 Jespers-MacBook-Air Software Update[259]: Calculated need 7324.112 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:58:51 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.636 MB free; 19252.345 MB available with MTM reclaim
Feb 21 08:59:03 Jespers-MacBook-Air Software Update[259]: Calculated need 1393.781 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:18 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:20 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: ----- Begin install -----
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: packages=(
              "PKLeopardPackage <file://localhost/Library/Updates/041-1440/AirPortUtility.pkg>"
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Skipping component "com.apple.AirPortBaseStationAgent" (1.5.5-155.2.0-155002000000000-*) because the version 1.5.5-155.7.0-155007000000000-255 is already installed at /System/Library/CoreServices/AirPort Base Station Agent.app.
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Extracting file://localhost/Library/Updates/041-1440/AirPortUtility.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Feb 21 08:59:52 Jespers-MacBook-Air installd[264]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.scmLrH/Scripts/com.apple.pkg.AirPortUtility.7SWC9 k
Feb 21 08:59:56 Jespers-MacBook-Air installd[264]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AirPortUtility.pkg”." UserInfo=0x7fc91c89f3a0 {NSFilePath=./preinstall, NSURL=file://localhost/Library/Updates/041-1440/AirPortUtility.pkg, PKInstallPackageIdentifier=com.apple.pkg.AirPortUtility, NSLocalizedDescription=An error occurred while running scripts from the package “AirPortUtility.pkg”.} {
              NSFilePath = "./preinstall";
              NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAirPortUtility.pkg\U201d.";
              NSURL = "file://localhost/Library/Updates/041-1440/AirPortUtility.pkg";
              PKInstallPackageIdentifier = "com.apple.pkg.AirPortUtility";
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[259]: Error: An error occurred while running scripts from the package “AirPortUtility.pkg”. (PKInstallErrorDomain code 112)

Unable to Install any packages in Fink

I am unable to install any packages either via Fink commander or via the terminal. I was able to install some just the other day, so I don't know what went wrong.
I have not been able to get Fink commander to see any package lists, despite following every bit of advice I could find in these forumns and on the net. Also, I updated the repositories rsync as instructed on the net. I can see the list of Fink packages by running "Fink List". However, when I try to install "sudo apt-get install xyz package" I connstantly receive the error "xyz package not found".
I'm sure this is a case of operator error, only I don't know what that error might be. I would be most grateful for anyone's help in this regard as I really enjoyed the Fink programs like kdegames that I was able to install before I started having this problem.
My thanks to everyone for any assistance they can provide.
Message was edited by: PugetSounder

I appreciate your previous response, instructing me to enter "source /sw/bin/init.sh as a user in order to run Evolution.
My problem is that this solution only lasts until I logout. When I log back and and try to run evolution via terminal, I receive the error "Command not found". Once I enter your instruction again, all is well-for that session.
Is there a way I can do this globally and make it "stick"? By making it stick I mean so that I don't have to do it each time I want to run evolution.
These issues of course don't happen when evolution is run as admin user. Also, it's worth noting that evolution is the only fink program that causes these problems. Other KDE programs like kgeography and kmahjongg don't have such issues.
I appreciate any feedback you can give with this issue.

Unable to install any apps..did reset, reboot, restore but nothing works

unable to install any apps..did reset, reboot, restore but nothing works

so you want to restore as new not from a back up and then try to download a application. the purpose for this is the fact that if you restore from a back you then your just putting the save soft ware back on your phone. and if soft ware is the issue then this step just got voided out. if that doesnt work or you did do that then it can be something hardware related and it can be replace through apple for free if your under the hardware warranty

I am unable to install ANY Adobe product on my Macintosh

I am unable to install ANY Adobe product on my Macintosh
iMac running 10.9
Tried to update Adobe Reader and was unable to.
Removed Reader and tried to reinstall, no luck.
Now my copy of Adobe Acrobat Pro will not run or reinstall.
I have spend over an hour with Adobe tech support only to be told that they will escalate it to someone else.

Just to let you know,
I applied this procedure today http://forums.adobe.com/message/5780749#5780749
and it solved all my issues, CCDesktop and PhotoshopCC correctly installed and up and running now.
Regards,
Roberto

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

Hi Pamela,
You can follow the article: Activation & deactivation help which might be helpful for your activation issue.
Please let us know if it works or if you still face any issue.
Thanks,
Ratandeep Arora

Installing AMD graphic driver turns into BSOD

Hello, I have recently reinstalled Windows on my laptop and now i can't install AMD graphic driver. Whenever I try to install it, my screen switch off ( as usual during installing of graphic driver) and then turns into BSOD with error "atikmpag.sys". After this, I am unable to switch on my computer, because there is always BSOD waiting for me and I have to reinstall windows again. This is happening with Win 8.1 and with Win 7. I have tried many versions(releases) of drivers and many ways to install them. But the result is always the same: BSOD "atikmpag.sys".
Could u give me any solution for my problem? It is really frustrating. I am not very used to write in English, please excuse me. Regards, Patrik Obrtlík

AMD's 'catalyst clean utility' (stand-alone program) is notoriously bad, yes especially for switchable graphics laptops. And have heard some horror stories of that ruining windows installations needing a reinstall DDU, I would argue is perfectly safe however. It is pretty universal generic clean utility which can clean both AMD and Intel components. I use it myself(HP envy 15 with AMD+Intel), though AMD catalyst install manager (from 'uninstall or change programs' list) would work, though I don't think it cleans/removes Intel installations.

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Satellite L650-10D - Unable to install any graphic driver

Similar Messages

Maybe you are looking for