Satellite L650-116 memory card reader is not working

Hello
I have a problem with built-in memory card reader. Do not read my SD card at all, drivers installed.
Please help.

Hi
The notebook supports an BRIDGE MEDIA SLOT which support this card formats;
SD Card 8MB-2GB
SD-HC 4GB-32GB
Memory Stick 128MB-256MB
Memory Stick Pro 256MB-16GB
mini SD 32MB-2GB
SDXC 64GB
As you can see, the notebook is able to read max 2GB SD card.
The card reader will not read bigger SD cards.

Similar Messages

My Memory Card Reader is not Working...

I was Purchased LENOVO 3000 N200 notebook last month. All devices and working properly. But my MEMORY CARD READER (5 in 1) is not working. I was downloaded drivers and installed in my laptop, but when i'm inserting memory card in to slot it is not showing any message in my laptop. But Green LED is blinking.
Please give me instructions how to use MEMORY CARD READER...
ashok

Although the best way to read your memory card, memory card readers can be a pain. I've had a few I've just thrown out. Make sure the USB connection to the port is fully seated. Make sure the memory card is fully seated in the reader. Do you have an SD card because the reader in the iMac is by far the most reliable I've used.

Satellite M60-104 - memory card reader does not read memory stick pro duo

Hi guys,
the built in card reader on my laptop does not recognize/read sony's memory stick pro duo - is this normal or not?
I know it should read memory stick pro but not sure about pro duo.
Can you help me please?

Hi
>the built in card reader on my laptop does not recognize/read sony's memory stick pro duo - is this normal or not?
Of course this could be normal behavior because not all cards are compatible and supported.
I would recommend taking look into the user manual because there you can find a information which cards can be used in the notebooks card reader!!!

Satellite Click 2 Pro - Card Reader slot not working with Fedora 21

I am trying to get my Satellite Click 2 Pro P35W-B3220 to recognize the microSD card reader that is on the side of the screen.
I have the other one working just fine.
I'm using Fedora 21 as my OS.

# lspci -k
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel modules: i2c_i801
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Unassigned class [ff00]: Device 1aea:6621
Subsystem: Device f960:1179

Inspiron 1520: memory card reader doesn't work in Windows 8

I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?

Did you ever get this problem figured out? I had two hardware devices indicating problems when installing windows 8 on my 1520. Never actually used my card reader until I had everything up and running. I downloaded "Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00 Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00
R141246.EXE | Hard-Drive (582 KB)
Chipset|
Release date 26 Jun 2007
|Last Updated 03 Nov 2011"
It asked if I wanted to use it since I already had a newer driver in installed and I did it anyways. No more flags in device manager. Hope it helps.

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Satellite X200 and Windows7 (32bit) - Card Reader is not working

Hi All,
Hope someone can help.
My X200-219 has recently been upgraded to Windows7 and although it is running well, (better than with Vista for now anyway), the card reader is not working.
Do I need a driver installed??
Looked at various but can't find anything obvious??
Cheers and thanks
DB

Hi
Try please to install THIS driver .
It is Vista 32 bit driver for Digital Media Card Reader. I hope it will work.
Send some feedback.

Tun miniport adapters are not working and the camera card reader is not working on a T61P.

The Microsoft tun miniport adapters #4,2, and 3 are not working. They display code 10 error message. Also the USB mass storage device (camera card reader) is not working.
I have tried to uninstall and update the drivers to no avail. I have used ThinkVantage Tool Box. It only lets me know that they are not working. It does say to reinstall them. I have tried. All effort has failed.
All was find until I ran several updates via ThinkVantage.
All suggestions would be appreciated.
Thank you,
Tom

You will not lose data if you back up
Worth doing the basic troubleshooting
Reset
Restore best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
Visit Apple store since if it isn't software probably iPhone is on it's way out

Since I installed lion, my SxS Card reader is not working any more. Some advise?

since I installed lion, my SxS Card reader is not working any more. Some advise?

Try resetting the PRAM https://support.apple.com/kb/HT1379

Installed Photoshop Elements. Card Reader still not working.

Installed Photoshop Elements. Card Reader still not Working.

And what does any of that have to do with Adobe software? You better check your hardware setup and install the proper driver for whatever card reader you use...
Mylenium

HELP!!! My Card reader is not working!

My card reader is not working and this is extremely frustrating when trying to transfer data from one device to my my macbook pro. Is there any one out there that can help me with this issue?

Some people (me included) have found the problme to be a stuck contact inside the socket on the MacBook Pro. The far left contact appears to get stuck in the "inserted" position (depressed) and fails to signal to the computer that a new card has been inserted. This contact is partially hidded behind an alignment key molded into the socket. One fix is to carefully (and I mean carefully) use a toothpick to gently prod the contact into its "not-inserted" position (it will pop up and work afterwards). If you aren't comfortable doing this yourself, you can get an inexpensive card reader that connects via USB as a workaround.
If the computer is still under warranty (or you have AppleCare), take it in and let Apple or an AASP fix it for you.

SD card reader is not working in my MBP early 2011. Is there any solution?

SD card reader is not working in my MBP early 2011. Is there any solution?

on my macbook iphoto didn't recognise my camera or card reader after upgrading to iphoto '11,
Evenutally I went to an application called Image Capture which I seem to have already. This read the camera contents. I selected the images I wanted and then imported them into iphoto which was one of the options given. It worked. God knows why one has to go through two steps. But I'm feeling pretty triumphant. This may help you if you haven't already sorted it.

Numeric key pad is not working, card reader is not working

Numeric key pad is not working, card reader is not working,

Did you (or someone else) physically open the laptop case?
If you did, then some cables might have gone loose inside.
If you didn't, for the card reader, check if appropriate device drivers are installed in windows device manager.
for the numeric keypad, first tap once on the NUM LOCK key and check.
If this doesn't solve the problem, boot to "Safe mode", and check.

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

After update my memory card slot is not working

after update my memory card slot is not workingplease help me

Hi!, SHAIKE: Welcome, to Forum !. For help you, is necessary what, indicate brand, model and Operating System of your device.

Satellite L650-116 memory card reader is not working

Similar Messages

Maybe you are looking for