Satellite L650-11R - not able to connect to public networks

Hello there.
Although I am very pleased with my laptop, I have one problem. I am not able to connect to public networks using ethernet cable at some location (not everywhere) Users with different laptops have no problem connecting to the same networks that I cannot, so I'm guessing the problem is my laptop.
I always get "unidentified network" error. I tried replacing the cable but the problem still remains.
Any suggestions?

Hi everybody, I have the same problem which happened with united & for the same product Satellite L650-1HR & also using default Toshiba OS, Windows 7 home premium.
from my home I can't connect to internet & always get "unidentified network" error also I tried replacing the cable but the problem still remains. only at my home & the same cable working properly with any other Laptop without any problem, outside home internet working properly without any problem.
I tried all ways, turned off firewall & the DHCP is already enabled, but I'm getting message telling that " the local aria connection does not have a veiled IP configuration"
So what do you think?

Similar Messages

Not able to connect to wireless network using WEP 128 bit hex password

I'm using a 128 bit hex WEP password on a Belkin wireless router.
My ascii passphrase is 13 characters.
I tried using the hex password generated by the Belkin router, as well as the hex equivalent of my ascii passphrase. Every time, I am told that either "there was an error connecting to the network" or the "password is incorrect" message.
I'm using channel 7, but have also tried with channel 11.
I tried using a $ sign in front of the WEP hex password. The $ does not work with Open Internet Connect or the Airport menubar.
I can connect if I don't use any encryption on the wireless network, and also through the Ethernet cable.
I have an iBook which connects fine to the wireless network.
So why doesn't the iMac work the same way ?

The security difference between NO encryption and any form of WEP is about 2 minutes or less for somebody looking to get in... besides having WEP enabled makes you look like an easy target since you think it'll stop anything!
Either leave it off, making Hackers think at least 3 minutes about WHY, or use/setup WPA of one form or another!

My iPad is not able to connect to 3G network.

Since last April, I am dealing with a connection problem. My3G connection falls away and I receive the message: No service.
I did all kind of restores, soft ones and hard ones, by iTunes etc. but nothing helps. Sometimes it is back and then it is again gone. I also placed a new simcard, but even that did not help. Unfortunately, Apple care in The Netherlands can't help me. Does any one has an idea how to solve this problem? Thanks

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

UM175 - Not able to connect to office network with VPN

I am having trouble connecting to my office network using this wireless card, UM175, and connecting with a VPN. I have the VPN set up the same as many other computers connecting to our server. Currently when I start VZAccess, I can access the internet and everything works fine. When I start my VPN to connect to my office server, it takes multiple tries with error 691 being returned. After two or three tries it connects. I can ping my computer from the server. I can ping my router and my server from my notebook with the UM175. However, I cannot do anything with the server. I cannot access the internet, access files from the server, or access any software on the server. I contacted IT and our administrators and they tested the system and VPN and state that there is a problem with the modem UM175. Is there some setting that I must set to make this work correctly. This is an urgent matter and must be working, or I will have to purchase another type of modem.

Where are you located? I'm in the Bay Area, CA and I was using the UM175 with my PPTP VPN without any problems. However, I recently upgraded to the new 4G on Wednesday and now the PPTP VPN won't authenticate...errors on verifying user name and password. I did a packet trace and found GRE packets are being dropped. This is a Verizon issue and it appears their 4G upgrades have directly caused this problem.
There is another thread about this issue located here: http://community.vzw.com/t5/Broadband-Netbook-MiFi-Devices/LG-LTE-Modem-VPN-Not-Working/td-p/349846

Not able to connect to my network since upgrade 2 days ago

Hello,
1 of my machines is unable to connect wirelessly to my network now.
It usually is on NetworkManager, and fails at the "setting address" stage.
I switched to manual setup to see where it fails and this I what I have:
ip link set dev wl works
rfkill indicates no block
wpa_supplican connects
BUT
that's where it stops, I cannot get a DHCP lease with either dhclient or dhcpcd.
They both timeout with nothing.
Strangely when I look at my router's log file, I see the requests coming but they are a bit strange, requests coming from this machine are as this:
Jun 28 22:19:28 tomato daemon.info dnsmasq-dhcp[898]: DHCPDISCOVER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:28 tomato daemon.info dnsmasq-dhcp[898]: DHCPOFFER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:44 tomato daemon.info dnsmasq-dhcp[898]: DHCPDISCOVER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:44 tomato daemon.info dnsmasq-dhcp[898]: DHCPOFFER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:51 tomato daemon.info dnsmasq-dhcp[898]: DHCPDISCOVER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:51 tomato daemon.info dnsmasq-dhcp[898]: DHCPOFFER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:59 tomato daemon.info dnsmasq-dhcp[898]: DHCPDISCOVER(br0) 192.168.1.114 <MAC ADDRESS>
Jun 28 22:19:59 tomato daemon.info dnsmasq-dhcp[898]: DHCPOFFER(br0) 192.168.1.114 <MAC ADDRESS>
While for machines that connect it looks like this:
Jun 28 22:13:41 tomato daemon.info dnsmasq-dhcp[480]: DHCPDISCOVER(br0) 192.168.1.108 <OTHER MAC ADDRESS>
Jun 28 22:13:41 tomato daemon.info dnsmasq-dhcp[480]: DHCPOFFER(br0) 192.168.1.108 <OTHER MAC ADDRESS>
Jun 28 22:13:41 tomato daemon.info dnsmasq-dhcp[480]: DHCPREQUEST(br0) 192.168.1.108 <OTHER MAC ADDRESS>
Jun 28 22:13:41 tomato daemon.info dnsmasq-dhcp[480]: DHCPACK(br0) 192.168.1.108 <OTHER MAC ADDRESS> <HOSTNAME>
What does the one having issue not send the DHCPREQUEST?
I assume the ACK is coming from the router in exchange for the REQUEST.
Thanks!

Hi. I had the same issue.
In my case it was caused by this bug: https://bugzilla.kernel.org/show_bug.cgi?id=78581
I solved it by downgrading the kernel, but there is also a workaround: setting the modprobe to "options ath9k_htc nohwcrypt=1" (I haven't yet tested this).
EDIT: The workaround works fine, I've just tested it. Simply create a file named /etc/modprobe.d/ath9k_htc.conf with the line "options ath9k_htc nohwcrypt=1", then reload the ath9k_htc module.
Last edited by fg (2014-07-01 12:02:01)

Not able to connect to wireless network by Time Capsule

Since yesterday (also updated time capsule firmware) I have reset my time capsule several times and re-setup my wireless (through time capsule). Wireless is visable in Airport configuration, but can not connect (either time out or keeps asking password). Ethernet through capsule to internet works OK, but wireless not. Ipad keeps asking me to connect to my own network; after inputting password no connection possible).

Hello tfh12. Welcome to the Apple Discussions!
There is always a possibility that something may go awry when updating firmware. I would suggest at this point of reinstalling the earlier version to see if this resolves the problem.
If it does, you can always attempt to upgrade again.
To manually download and install previous (earlier) versions of firmware...
o Open AirPort Utility.
o From AirPort Utility menu, hold the Option key and choose Check for Updates....
o Select (place a check mark beside) the version you require.
o Click Download.
o Select your base station then choose Manual Setup from the Base Station menu.
o From the Base Station menu choose Upload Firmware....
o Select a firmware version and click OK.
(ref: http://docs.info.apple.com/article.html?artnum=305301)

TS4429 Ever since i have upgraded to iOS 6.0 my iPhone 4 is not able to connect to cellular network and it always says Searching.. - No Service - Searching.... Even after upgrading to iOS 6.0.1 the issue still remains.

Please Help me to Solve No Service . After I upgrade to ios 6.0 my I

Please Help me to Solve No Service . After I upgrade to ios 6.0 my I

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

10g Enterprise Manager is not able to connect to the database instance

I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
The database instance is open,the listener is up and the agent connection also says that it succeeded.
The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
Thanks in advance.
Ram

Hi,
The EM is started and if i give emctl status dbconsole
-bash-3.00$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://gladiator:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running
Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
Thanks in advance.
Ram

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Not able to connect CRM Online to PowerBI

Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
oops, something went wrong
Failed to update model parameters
Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
Error Code400
TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
Version11.0.9165.945
Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

Hi Kiran
Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
SAP Note Description:
Summary
Symptom
MDM components stopped communicating after upgrading to 7.1.03
Other terms
TCP ports, Firewall, connection, network, SP03, SP3, 7.1
Reason and Prerequisites
Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
Application Old Port # New Port #
MDS 20005 59950
MDLS 20008 59650
MDIS 20009 59750
MDSS 20010 59850
If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
Solution
Revise the firewall rules such that they will allow the communication according to the changes described above.
In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
telnet <MDM server host name or IP address> <TCP port to test>
2) If no error response is received than it means that the TCP port is allowed to go trough.
3) Repeat steps 1,2 for all the other ports need by the application.
Thanks
Sowseel
Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

Not able to connect N70 to pc(xp) using ca-53 cabl...

Not able to connect N70 to pc(xp) using ca-53 cable
hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!

The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything.

Not able to connect to wifi wpa2 networks in lenovo vibe x2

Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Not able to connect to a queue under a foreign server.

Not able to connect to a queue under a foreign server.
I'm using WebLogic Server Version: 10.3.3.0. The foreign server is running, and can be pinged from this local server. Also the port where queue resides on foreign server, can be accessed through the my local server.
OS used is AIX 6.0 on both servers.
Tried restarting the local server but nothing helps. Same error continues.
HAS ANYBODY FACED THIS PROBLEM? WHAT IS THE CAUSE AND SOLUTION FOR THIS?
It throws following errors:
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.NoInitialContextException: Failed to create InitialContext using factory specified in hashtable [Root exception is java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown']
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:247)
     at javax.naming.InitialContext.initializeDefaultInitCtx(InitialContext.java:318)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:348)
     at javax.naming.InitialContext.internalInit(InitialContext.java:286)
     at javax.naming.InitialContext.<init>(InitialContext.java:211)
     at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:179)
     at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:96)
     at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:377)
     at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
     at javax.naming.InitialContext.lookup(InitialContext.java:436)
     at weblogic.jms.common.CDS$2.run(CDS.java:503)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
     at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
     at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
     at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
     at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
     at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown'
     at weblogic.common.internal.BootServicesStub.getMsg(BootServicesStub.java:34)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     at weblogic.security.acl.internal.RemoteAuthenticate.authenticate(RemoteAuthenticate.java:90)
     at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:746)
     at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:678)
     at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:239)
     ... 46 more
>
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is null>
<Jun 25, 2012 12:14:45 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:03 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:25 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:35 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:43 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:20:53 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:24:16 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
Edited by: 942523 on Jun 24, 2012 11:38 PM

Thanks René van Wijk for the reply.
I have a foreign server created in my local server, where i have already given the provider URL. This foreign server has the one queue and one queue connection factory under it to which I'm referring to.
Under JNDI tree i noticed this, for the queue(NOTIFY_QUEUE) i'm trying to read from one of the EJB:
This page displays details about this bound object.
Failed to create InitialContext using factory specified in hashtable
Also,etc/hosts has already these IP entries. Even after hardcoding the provider URL its throwing following:
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.CommunicationException [Root exception is weblogic.rjvm.PeerGoneException: ; nested exception is:
     java.io.EOFException]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
     at weblogic.jndi.internal.WLContextImpl.translateException(WLContextImpl.java:452)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:408)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
     at javax.naming.InitialContext.lookup(InitialContext.java:436)
     at weblogic.jms.common.CDS$2.run(CDS.java:503)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
     at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
     at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
     at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
     at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
     at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
     java.io.EOFException
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at weblogic.jndi.internal.ServerNamingNode_1033_WLStub.lookup(Unknown Source)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:405)
     ... 36 more
Caused by: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:338)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:768)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:702)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:890)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:840)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is t3://10.52.50.51:7002>
Let me know if any other thing i'm missing or it can be something else like network or some other issue.

IPad 2 - I am not able to connect my iPad 2 to my tv anymore using AV adapter.

What is wrong with my iPad 2? I'm not able to conect my iPad to my proyector or tv anymore using AV adaptor. Is there something wrong with my iPad?
I tried it with my wife's iPad 2 and it was the same result. I was not able to connect her iPad to my TV. Niether TV or a proyector couldn't find the device.
Would you please help me? Your help will be well appreciated.

Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
Try another adaptor before worrying about your ipad.

Satellite L650-11R - not able to connect to public networks

Similar Messages

Maybe you are looking for