Satellite L650-1M6 and problem with video card

Good evening!
I have new Satellite L650-1M6 with no OS. When i made a fresh Windows 7 32bit installation i got several device problems. Most of them i manage to resolve my self (like wlan drivers) but now i need your professional help.
At this moment i had left this Problem Devices (from System information):
Not Available ACPI\TOS6205\4&4A257CF&0 The drivers for this device are not installed.
I think it could be video card (need to be ATI HD5470) but SysInfo say:
Adapter Type Not Available, (Standard display types) compatible
Adapter Description Standard VGA Graphics Adapter
Would appreciate any help on this.
Thank you in advance.

Hello
As I can see you got notebook without operating system and you try to install and configure your own OS.
In many postings I wrote here I write again and again that most important thing is to install all drives and Toshiba specific stuff following right installation order so here is installation order for your notebook model:
Win7
TOSHIBA Assist 3.00.10_O
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Synaptics Touch Pad Driver 15.0.8.1
Realtek Card Reader 6.1.7600.30111
TOSHIBA HW Setup Utility v2.0.0.6
TOSHIBA Supervisor Password Utility v2.0.0.3
TOSHIBA Web Camera Application V1.1.1.15
TOSHIBA HDD_SSD Alert 3.1.64.6
Intel Chipset SW Installation Utility 9.1.1.1024
Intel Management Engine Interface 6.0.30.1203
Display Driver
Intel Turbo Boost Technology Driver 1.1.1.1007
Intel Rapid Storage Technology Driver 9.5.7.1002
Conexant Audio Driver 4.119.0.61
TOSHIBA Value Added Package 1.3.3_64
LAN Driver
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.50
Bluetooth Stack for Windows by Toshiba v7.10.10(T)
Wireless LAN Driver
ConfigFree 8.0.29
I recommend you to install Win7 again and continue with all other stuff flowing this install order and I hope everything will be OK.

Similar Messages

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Problem with video cards and posterization effect

Hello everyone,
I have problem with posterization effect in Lightroom 4.4 and 5.
When monitor uses integrated video card (Radeon HD 4300) everything is ok. But when I plug in other video card (tested on GeForce GT630 and Radeon HD 7770) I have posterization effect in shadows in every Lightroom module. When picture is exported to jpg then everything is ok. Here is screenshot with NEF in Lightroom and jpg in IrfanView: https://www.dropbox.com/s/yftnnk6w1guii70/Lightroom_problem.png . Of course with colour images I have the same problem. Anyone have an idea what can I do? I have installed the newest drivers for video cards but it didn't help.

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Satellite A500-1GH problem with video card (I think...)

Hello,
I am having a problem with my A500-1GH. Randomly the monitor goes black and then recovers by showing a message "display driver stopped responding and has successfully recovered". My graphics card is the Nvidia GeForce 330. I read a lot, but all the opinions were old - from the beginning if the year, and no one seems to had solved this problem then. Do you know if now there is a solution for this?
The laptop is brand new (respectively the windows is brand new) and the drivers and bios are up to date.
Thank you in advance :)

hi,
Yeah, it is known problem with vga driver in this forum. As you already said yourself no one seems to had solved this problem :( I can just recommend you to try to install a vga driver from nvidia.com. In my case, i have nvida Gt 230 M, driver update solved it.

G505 problems with video cards.

Lenovo G505, 59-419907, AMD A6-5200, AMD Radeon R5 M230
I suffer second day. I downloaded a lot of different drivers.
several times reinstalled windows 8.1.
after installing windows in my Device Manager, there is a Standard VGA Graphics Adapter and unknown video device
when I try to install vga drivers from the Lenovo site, or from the AMD site, both graphics card become with the error icon
- Windows has stopped this device because it has reported problems. (Code 43)
Catalyst does not see the video card with an error
if I'm disable in the BIOS a discrete video card everything is OK.
as soon as I'm in the BIOS to turn on an external video card in the device manager both cards an error.
I tried to put the first driver on the onboard video card and then on the outside. nothing helps.
please help me before I killed myself.

Hi,
I have a same problem, I bought g505 (bios 3.00) but the wifi not work after few days. I think upgrade the bios, but on the official website was 2.04 version (i not understand, because i have 3.00, i think "downgrade" it), now my bios is 2.04 but the switchable graphics not work, only other option (i not remember it, maybe UMA) work, and I can't finde the 3.00 bios.
Thank for the answer, and sorry my English
Laslie

PCI port problems with video card

I have been running 2 video cards (ati 9800pro and 7500) fine for about 2 months now. Over the weekend I came home to find the monitor with my second card garbled with black lines running up and down the screen, shifting left and right. Also, there was a problem with my promise controller (had a question mark next to it in device manager) I reinstalled that and it works fine now. My second card continues to give me problems though. Device manager picks it up and says that my card is working fine but in display settings my card does not show up. I believe it a problem with the motherboard as I have tried 2 nvidia cards with the same result. It is also not related to windows as if I change the boot config to load my second card first (pci) the black lines/wavy picture loads up with the msi screen and in the bios setup as well (totally unreadable). I've also made sure that my monitor is working fine. Any suggestions???? Thanks.
Ian

Well to tell you the truth, I don't like the sound of this ...especially since you said that you tried another card, and had the same result....Well I would first go into the BIOS and on the PNP/PCI page, check the Clear NVRAM to enabled..As this will reset all the PNP devices...See if that works ...Have you tried to switch the AGP/PCI initiation sequence in the BIOS? back and forth?...You can also see if there are any IRQ conflicts.(but you probaly did this allready)...You can also try to increase the PCI latency, If it is set to 32 go up to 64 and try...Do you have any other PCI cards with problems?...Have you tried a different PCI slot?.....Well maybee another member or moderator has some advice ...Let us know.....Sean REILLY875

Problems with video card in CS4

I'm having what I think is video problems since I switched to CS4. No problems with CS3 before, or any other programs except CS4, now. Frequent apparent redraws leave remnants on screen, panels move back and forth, etc.
I have a Dell Precision 490 with 4gb ram and a nVidia Quadra fx 550 with 128 megs of ram. Open GL is enabled. I have loaded all the latest nVidia drivers.
If this sounds like a video card problem, can anyone recommend a good, not too expensive card? I don't play any games, just use the machine for PS. ID and Flash mostly.
Thanks in advance.
Jon

I am having the same problem with CS3 and CS4. Any luck on fixing your problem?
Thanks
andy
[email protected]

May have a problem with video card

Hi, I recently purchased my HP Pavilion 500-205t back in September. I haven't replaced anything in it yet. I'm not sure if I really should. I recently discovered that I am unable to watch videos on Youtube. It may sound silly to ask but I've tried everything I could think of to maybe fix my problem (updating flash, java, accepting cookies, clearing cache, restarted computer, tried a different browser, changed video quality, etc). I even made sure my graphics device was up to date on my computer. Nothing works! Is it because I actually need a video card? I assumed the computer actually came with it's own decent video card. I don't know if it's even my graphic card that's the problem. I obviously know nothing about computers so please I need your help!

Hello @camaya08,
I understand that you are having issues with your HP Pavilion 500-205t Desktop PC when watching YouTube videos. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
As well if you could describe what happens when you try to watch the YouTube video that would help as well.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Apple ID and problems with credit card

Hi, I'm having a lot of problems with the credit card registered to my ID.
I always made purchases with the card registered but now I get an error message which is as follows:
"Your payment method was not accepted. Please enter valid information for payment."
I've always used the same card VISA PostePay to buy app on iTunes Store but recently I'm getting this message. How can I fix? Thanks.

Firstly, make sure that your card is not close to the expiration date listed with your card registration. Next, take a look at your iTunes linked Credit Card information in all regards. Ensure that your Apple ID and Credit Card information indeed is identical with regard to Name, Address, Postal Codes, etc. Also, if you are an Apple Store Online Customer make certain that your Profile information is all, again identical to your other linked data regarding that particular Credit Card. There may be some different information somewhere that is giving you this intermittent problem. Check Your Credit Report and ensure there are no open disputes or recent file data that is in error.

865PE Overclocking problem with video card

Hello, this is my first post, so I just wanted to say hello to everyone.
I just bought the following equipment
P4 2.8c (stock cooled)
MSI 865PE LS motherboard
Kingston HyperX PC3500 2 X 256MB (dual channeled)
Geforce 4 TI4800 8X AGP 128MB
Sparkle 400W Power supply.
My problem is, when I overclock my processor, to a moderate level (3.1 GHZ) I get hieroglyphics and different colored textures placed when playing games (battlefield 1942) and when benchmarking in 3dmark.
What is the cause of this? Maybe a AGP voltage issue? Im new to overclocking and do not know much about the video card side to overclocking.
Thanks for the help,
-- Nick

set AGP/PCI locked to 66/33 in the BIOS.

PROBLEM WITH VIDEO CARD IN ORACLE VIRTUALBOX

Let's get to the point.
My host system is Windows XP and my Virtual system is Windows 98 .Also, my Windows XP has a ATI 128 Rage PRO video Card. The motion or movement in my Virtual PC is slow since the Oracle VM VirtualBox does not recognize my video card .Instead of it, the VM VirtualBox installed a Standard VGA Card driver in my guest Windows 98.

963627 wrote:
Let's get to the point.
My host system is Windows XP and my Virtual system is Windows 98 .Also, my Windows XP has a ATI 128 Rage PRO video Card. The motion or movement in my Virtual PC is slow since the Oracle VM VirtualBox does not recognize my video card .Instead of it, the VM VirtualBox installed a Standard VGA Card driver in my guest Windows 98.which is older Windows 98 or you?
What Oracle Versions are certified on Windows 98?
Please join the 21 ^st^ Century at your earliest convenience.

Problem with video card

Hi,
Running Windows 7 64bit with nVidia GeForce GTX570 and Adobe Premiere CS5.
Problem is that Adobe Premier do not let me to unable in "Project - Project setting - General " - "Video Rendering and Playback" and "Rendering"
an option with "Mercury Playback Engine Hardware Only"
From what I know my card with CUDA is supported by Adobe but somehow it do not work.
Any sugestions, pleasae??

Acctually that is explaine very well on tis site:
http://www.studio1productions.com/Articles/PremiereCS5-2.htm
Maybe it will help the others

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

Problems with video card.

I might need your help with the following problems. I just installed the ati radeon hd 5670 card (and the drivers) on the hp pavillion p6516f. When i checked the settings on adobe photoshop cs5 (3d section) it's grayed out. But i installed the graphics card driver. Please somebody help!

It looks like an older version.
You can go here and download the 11.2 version, just
after you get to the actual download page for your operating
system, go to the bottom and pick previous drivers and then choose the 11.2 version.
http://support.amd.com/us/gpudownload/Pages/index.aspx
MTSTUNER

Help flashing do not disconnet won't go away and problem with video

Hi - when I go into the options to set my music download etc, the page for video is grey and will not allow me to select automatic updates. When I drag the video over it says it has been unable to install it.
It now also keeps flashing the 'do not disconnet screen'
I am technophobic so really need help. My hubby bought this for my christmas as I love music but I am lost - it is the 60 GB version so there is loads of room.

If your ipod is a 60gig one, you have a fifth generation ipod (As known as ipod video)
this is the correct forum for your answer
http://discussions.apple.com/forum.jspa?forumID=808
i would like to help you, but i never used and ipod video.
good luck

Satellite L650-1M6 and problem with video card

Similar Messages

Maybe you are looking for