Satellite L650 - Cannot start the Office 2010 - icon has changed
I have a new Satellite L650.
Using the Office 2010 icon on the desktop and my software code I installed the program.
Now I can't find it and the changed office icon says only for use for installed programs.
Where is it? Not in the listed programs.
Hi mate
Office is a package which contains several single applications like MS Word, Outlook, etc... so you will not be able to start Office clicking on Office icon.
If you want to start MS Word for example, then you will need to choose this software.
Usually you could find this going to Start button -> All Programs -> MS Office.
Similar Messages
-
Satellite L650 - Where are the Office setup files located
Hey there
I have a problem with office 2007 on my L650 and need to locate the setup files/cabs to run the setup program again.
Anyone have any ideas where the files are located?
Cheers
BTW the prob with Office is when I click a file to open in office (ie: work.docx) spits up an error saying action only valid for products installed!
yet the icon is there and everything is installed, this only happened 2 days ago for no apparent reason.
I tried to go directly to the MS Office folder and initialise word from the 'EXE' and this gave me an out of memory error.
Tried to uninstall from Control Panel and still a different error came up.
Anyways if anyone can help please.As far as I know the Office is preinstalled on the notebook and you cannot restart the installation furthermore its just an trial version and if you want to have a full version, you have to make a purchase.
In your case I see just one solution: the unit needs to be set to factory settings again to get Office working again. -
IPhoto Library icon has changed
Yesteday, I updated my iMac (Late 2009) to Mountain Lion (10.8.2) and installed the newest version of iPhoto (9.4.1).
All seemed to be working well until a few hours ago. Things I have noticed:
1) The iPhoto Library icon has changed to a pink flower (although the iPhoto application icon and the iPhoto dock icon have stayed at the usual (sun/camera/palm tree).
2) iPhoto is taking about 12 seconds to quit (I have about 8,000 photos)
3) Keywords is behaving strangely - some photos have keywords attached to them which I haven't put there (some of the time) and sometimes the keyword list (command K) shows up with none of my keywords.
4) This one might be my imagination but the font used for the folders/albums looks a bit different than it used to.....!
Hope someone can help!
Regards1 and 4: Nothing unusual there, Apple change these things around from time to time.
2 and 3:
Back up.
Option 1
Try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Cannot start Microsoft Office Outlook. Cannot open the Outlook window.
I get the following error message when opening Microsoft Outlook (using Windows 7):
Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Errors have been detected in the file.
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst.
Quit Outlook and all mail enabled applications and then use the Inbox repair tool (Scanpst.exe) to diagnose and repair errors in the file. For more information about the inbox repair tool, see Help.
I have tried the suggested fix of using the start menu, clicking "run" and then typing in "Outlook.exe /resetnavpane" and it did not work. Do I need some sort of a longer path to make this work?
I cannot find the so called "inbox repair tool" and don't know how to use "scanpst.exe".
Are all my old email folders now lost? How can I start using my Outlook email again?
Thanks for any help. SusanneIt seems to me that your emails has not been lost, perhaps your outlook folder has been lost. to get your emails back you must try one of the following ways.
Use backup file, if you have kept it in another location.
if not then go to the:
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst."
and run the scanpst,exe tool to fix the outlook error on windows 7.
If this application is not working or giving error then use a powerful PST Repair tool. which ,may become helpful for
you.
Visit here to know more: http://howto.fixscanpstexe.com -
Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat -
I need help figuring out what happened to the Outlook 2010 icon on my Windows 7 desktop taskbar ribbon.
I keep it at the bottom of my desktop screen. I used to be able to right-click the Outlook icon and I could see options for: New Email Message; New Appointment; New Meeting; New Contact; New Task. I see the options, but it does not create a new anything
when I click on one of those options. It does nothing. I have even right-clicked on one of the options and there is a window that opens saying, "Open." I click it and still nothing. Did I click or unclick an option somewhere under properties
that took that time-saving tool from my choices?Hi,
Please right click on the Outlook icon in the taskbar, click Unpin this program from taskbar.
Then go to Control Panel, repair Office in Programs and Features.
Start Outlook again, right click on the Outlook icon in the taskbar, choose
Pin this program to taskbar.
If this issue persists, please try the same feature for other programs to determine if it's an Outlook specific issue or Windows Client issue.
Regards.
Melon Chen
TechNet Community Support -
Cannot start the presentation server
Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
failed to start a managed process after the maximum retry limit
Log:
$ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
saw.sawserver
saw.sawserver.terminatesawserver
saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
saw.webextensionbase.init.workstationCheck
saw.webextensionbase.init
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan -
Unpinning Office 2010 icons from taskbar after clean 2013 installation
Ok so when installing Office 2013, Office 2010 programs get uninstalled. If the user had any Office 2010 icons on there taskbar though, they are still pinned to the taskbar and inactive. Is there a way to completely remove these icons? I created a .bat file
which goes into where the shortcuts are
(C:\Users\%user%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\TaskBar). I watch as the shortcuts are removed from this area, but when I go to the taskbar the icons are still there. Clicking on them gives me a message that the item
has been moved, renamed, or deleted, and allows me to remove it manually. Is there a way through scripting or GPO or the registry to make the shortcuts and icons to be deleted without having to do this manually?Hi,
Looks like clear out the TaskBar folder (%Appdata%\Microsoft\Internet Explorer\Quick Launch\User Pinned\TaskBar) can only make the taskbar item an unusable shortcut with no target.
You might need to refer to some scripting to achieve this. Please take a look at this thread and see if it helps:
http://social.technet.microsoft.com/Forums/windows/en-us/07c56c20-3f56-4191-84c6-fc033f7a8f29/remove-default-pinned-items-from-taskbar-with-gpop
Also, for scripting related issues, you can post in our script forum for more experienced responses:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thanks,
Ethan Hua CHN
TechNet Community Support -
Cannot start the source application for this object - Embedded PDF in Excel 2007
I am having a real issue which unfortunately is intermittant and I cannot pinpoint what is causing the problem. Basically I am inserting a PDF object into an Excel worksheet and immediately after I insert it, it will open fine. If you click off into another cell and save the sheet, then try to reopen the embedded PDF, you get the error "cannot start the source application for this object".
Any help would be very much appreciated! Has anyone else run into this?I got that problem with one of my client after updating from Adobe Reader 8.2 to 9.3.1. Excel version was 2002 and not 2007 but this is Adobe problem.
Check that registry key for you Acrobat Document key points to right AcroRead32.exe path at HKEY_CLASSES_ROOT\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32
of whatever key points to your Acrobat Document.
I used Sysinternals Procmon to monitor registry activity and found a line and opened that registry location and found out Adobe Reader 8.0 path there.
9:55:56,9021789 EXCEL.EXE 3236 RegOpenKey HKCR\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32 SUCCESS Desired Access: Maximum Allowed
I have seen that Adobe Reader 9.3 doesn't update that registry and leaves Adobe Reader 8.0 values there. Same problem may be in other upgrade scenarios too.
In addition to that my Windows 7 with Office 2007 that has never had anything but Adobe Reader 9.x versions didn't had anything on that registry location and it gave me same "cannot start the source application for this object" error. Putting that path "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" to LocalSever Default value fixed that too. Maybe Adobe should do something with this issue? -
Cannot start the db after reboot machine
Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/medisys@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,risingstar wrote:
Hi,
Thanks for ur reply
plz have a look
[oracle@med ~]$ cd $ORACLE_HOME/dbs
[oracle@med dbs]$ ls
hc_rmct.dat init.ora initrmct.ora orapwrmct sqlnet.log
initdw.ora init.ora.84201013612 lkRMCT spfilermct.ora
regards,Well.You see that your sid is rmct not RMCT then
export ORACLE_SID=rmct
sqlplus "/as sysdba"
startup -
Cannot start the db after reboot
Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/pwd@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,By definition your installation was not successful.
What network were you connected to when you installed the database?
After you rebooted are you still connected to the same network?
Has the IP Address changed?
How is "HOST" defined in your listener.ora tnsnames.ora files?
Oracle 10g dot anything is currently in desupport mode. It would be far better to install 11gR2 at this point in time. -
Urgent: cannot start the shadow instance at phase STARTSAP_TRANS
We are upgrading to NW2004s (ABAP only) from 640.
<u><b>How to re-start the shadow instance?</b></u>
At this point, <b>anyway we cannot start the shadow instance.</b>
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
<b>The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]</b>
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
<b>The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]</b>
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:20:45 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since Mar 22, 2007 1:20:49 PM
> MOUNT POINT 12 = D:\D12\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 23 = D:\D23\51032247
> MOUNT POINT 18 = D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
> MOUNT POINT 15 = D:\D15\NW_2004s_SR2_Upgrade_Master
> MOUNT POINT 09 = D:\D9
> MOUNT POINT 14 = D:\D14\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 01 = D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 08 = D:\D8\SAP_CRM_5.0_SR2_Languages
> MOUNT POINT 20 = D:\D20\NW_2004s_SR2_Languages
> MOUNT POINT 03 = C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 06 = C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 10 = D:\D10
> MOUNT POINT 17 = D:\D17\51032257
> MOUNT POINT 21 = D:\D21\NW_2004s_SR2_Languages
> MOUNT POINT 19 = D:\D19\51032257
> MOUNT POINT 05 = C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 04 = C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 11 = D:\D11\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 07 = D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
> MOUNT POINT 24 = D:\D24
> MOUNT POINT 02 = C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 22 = D:\D22\NW_2004s_SR2_Languages
> MOUNT POINT 16 = D:\D16\BS_2005_SR2_SAP_Installation_Master
> MOUNT POINT 13 = D:\D13\SAP_CRM_5.0_SR2_Installation_Export
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:24:47 PM
> cancel
Connection to SAPup was closed
Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:28:34 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
Reading data from "Upgrade Master CD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:43 PM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:50 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:28:54 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:28:56 PM
> Parameter input initial yes
You selected the following PREPARE modules:
Parameter input
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since Mar 22, 2007 1:28:59 PM
> execute
Execution of PREPARE module Parameter input begins at 20070322142901
>> 14:29:01 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 14:29:01 PREPARE: END OF PHASE BEGIN_PRE
>> 14:29:01 PREPARE: START OF PHASE KEY_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 961511
? SAPup keyword =
Waiting for input since Mar 22, 2007 1:29:02 PM
> SAPup keyword = 19327784
>> 14:37:23 PREPARE: END OF PHASE KEY_CHK
>> 14:37:23 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
Done.
>> 14:40:10 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 14:40:10 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:40:10 PM
> INSTANCE NUMBER = 59
> SAP SYSTEM HOST = damascus
> SAP SYSTEM ID = ADC
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since Mar 22, 2007 1:43:59 PM
> DATABASE HOST = damascus
> DATABASE ID = ADC
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since Mar 22, 2007 1:44:03 PM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since Mar 22, 2007 1:44:14 PM
> BATCH HOST = damascus
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since Mar 22, 2007 1:44:16 PM
> R3TRANS PROCESSES = 3
> MAXIMUM SYNC TIME = 120
> MAXIMUM UPTIME PROCESSES = 1
The password for Operating System account .\SAPServiceADC:
? PASSWORD =
Verification of the password for Operating System account .\SAPServiceADC:
? PASSWORD =
Waiting for input since Mar 22, 2007 1:44:19 PM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 14:44:43 PREPARE: END OF PHASE INITPUT_PRE
>> 14:44:43 PREPARE: START OF PHASE DBCHK_PRE
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since Mar 22, 2007 1:44:45 PM
> no
>> 14:44:49 PREPARE: END OF PHASE DBCHK_PRE
>> 14:44:49 PREPARE: START OF PHASE CONFCHK_IMP
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:44:50 PREPARE: END OF PHASE CONFCHK_IMP
>> 14:44:50 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since Mar 22, 2007 1:44:50 PM
> continue
? SAP Solution Manager Key =
Waiting for input since Mar 22, 2007 1:44:53 PM
> SAP Solution Manager Key = 12D8B10981
>> 14:45:14 PREPARE: END OF PHASE SOLMAN_CHK
>> 14:45:14 PREPARE: START OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: END OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: START OF PHASE HIAV_CHK
>> 14:45:14 PREPARE: END OF PHASE HIAV_CHK
>> 14:45:15 PREPARE: START OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: END OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: START OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: END OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: START OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: END OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: START OF PHASE INIT_CBU
>> 14:45:15 PREPARE: END OF PHASE INIT_CBU
>> 14:45:15 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20070322144515
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Parameter input' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:45:15 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:45:23 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:45:26 PM
> Initialization initial yes
You selected the following PREPARE modules:
Initialization
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:45:30 PM
> execute
Execution of PREPARE module Initialization begins at 20070322144532
>> 14:45:32 PREPARE: START OF PHASE INITCURENV
>> 14:45:32 PREPARE: END OF PHASE INITCURENV
>> 14:45:32 PREPARE: START OF PHASE DBCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:45:34 PREPARE: END OF PHASE DBCHK_INI
>> 14:45:34 PREPARE: START OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: END OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: END OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: END OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: START OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: END OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
>> 14:46:00 PREPARE: END OF PHASE DBCONNCHK_INI
>> 14:46:00 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: START OF PHASE UCMIG_DECISION
Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
Upgrade and Unicode Conversion.
In this case, several of the migration preparation steps can be done already on the start release
or on the upgrade shadow system.
For further information, please refer to OSS note 928729.
Do you want to perform a combined Upgrade and Unicode Conversion?
? Yes
? No
Waiting for input since Mar 22, 2007 1:46:06 PM
> No
>> 14:48:04 PREPARE: END OF PHASE UCMIG_DECISION
>> 14:48:04 PREPARE: START OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: END OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: START OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: END OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: START OF PHASE INTCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
>> 14:48:15 PREPARE: END OF PHASE INTCHK_INI
>> 14:48:15 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 14:50:38 PREPARE: END OF PHASE ADJ_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: END OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: END OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: START OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: END OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: START OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: END OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 14:50:38 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 14:50:39 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 14:50:39 PREPARE: END OF PHASE SPACECHK_INI
>> 14:50:39 PREPARE: START OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: END OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: START OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: END OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: START OF PHASE EXECCV
>> 14:50:44 PREPARE: END OF PHASE EXECCV
>> 14:50:44 PREPARE: START OF PHASE EXECAV
>> 14:50:50 PREPARE: END OF PHASE EXECAV
>> 14:50:50 PREPARE: START OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: END OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: START OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: END OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: START OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: END OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: START OF PHASE ADDON_SPEC1
>> 14:50:55 PREPARE: END OF PHASE ADDON_SPEC1
>> 14:50:56 PREPARE: START OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: END OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: START OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: END OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: START OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: END OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: START OF PHASE ACE_CHK
>> 14:51:01 PREPARE: END OF PHASE ACE_CHK
>> 14:51:02 PREPARE: START OF PHASE CRM_BILL
>> 14:51:02 PREPARE: END OF PHASE CRM_BILL
>> 14:51:02 PREPARE: START OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: END OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20070322145102
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Initialization' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:51:02 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:51:41 PM
> continue
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:51:41 PM
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:58:46 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:58:53 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:58:56 PM
> Import initial yes
You selected the following PREPARE modules:
Import
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:59:00 PM
> execute
Execution of PREPARE module Import begins at 20070322145902
>> 14:59:02 PREPARE: START OF PHASE REQIMPORT
The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:59:02 PM
> continue
>> 14:59:05 PREPARE: END OF PHASE REQIMPORT
>> 14:59:05 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
Trying to find archive files ...
Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
>> 14:59:40 PREPARE: END OF PHASE READDATA
>> 14:59:40 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
>> 14:59:41 PREPARE: END OF PHASE READDATA_EXT
>> 14:59:41 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
>> 14:59:42 PREPARE: END OF PHASE TOOLFIX_CHK
>> 14:59:42 PREPARE: START OF PHASE CPYFIL0_CBU
>> 14:59:42 PREPARE: END OF P -
itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Cannot find the system preference icon on my Power Book G4
Cannot find the system preference icon on my Power Book G4
This is from memory, since I do not have a pre-10.5 OS on any computer.
Check the Applications folder. System Preferences is there.
What version of Mc OS X are you running? -
I cannot find the internet browser icon on my blackberry curve 9360
Hello everyone, I'd really appreciate some help please!
I cannot find the internet browser icon on my blackberry curve 9360.
I've gone to options, Device, Advanced system settings, opened the Host routing table, hit the menu key and chosen register now. I get message saying "Registration sent!"
What do I need to do now?
Many thanks in advance.Hi wilkasmum
This article will guide you how to solve that problem: The browser icon is missing or not shown on the BlackBerry smartphone
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution
Maybe you are looking for
-
Mbp retina mid 2012 Shuts down unexpectedly
I have my mbp for 2 years now.After the first year i installed windows 7 via bootcamp.I never had any problems with it until one day when i had connected an audio system to it and played skyrim.I stepped on the audio system cable and the jack pulled
-
Double Cancellation of a Billing Document
Dear all, I am facing a challenging problem (at least it is challenging to me), I had created an billing with no SO, just with the Article Document. I used VF02 to cancel the billing document by selecting each line item and then cancel item, because
-
XI, Service Packs and Visual Studio 2008
Hi Sorry if these questions have already been answered but I have tried to search and get the answers myself with lots of link following and frustration. We are developing a Windows forms application using Visual Studio 2008. We need a good solid rep
-
I am using loadMovieNum to place an external swf on the stage. it is unloaded via an on (release). another button loads the external swf again. when it is reloaded a second time the external swf seems to play faster. the external swf has the followin
-
HELP! Anyone knwo where I can buy X60 's orignial battery? ThinkPad R60 (9457-AY1), Centrino Duo, 1GB RAM, 80HHD, XP