Satellite L650 - Microphone of headset not recognized

Hello,
On my L650 I'm trying to use a headset, the headphone socket is ok, the problem is the microphone socket when I plug external microphone it cant be found in recording devices only the on board microphone shows up.
Cheers
Gavin

Hey,
Have you tested the headset on another computer already? Just to make sure the microphone and cable of headset works properly and doesnt cause this problem.
I often use the headset on my notebook but its always recognized as usual. Its listed in recording devices (right click on speaker in taskbar > Recording devices).
But if not a sound driver update could help in this case. ;)

Similar Messages

  • Why is logitech 350 usb headset not recognized by my MBP?

    I have a Logitech Premium USB Headset 350 that is not recognized (at all) by my fairly new MBP, which is running OS X Lion 10.7.5. I have run all of the available software updates but the headset it still not recognized as an input or output device (under system preferences). When I plug it into my old PC (Dell Inspiron) it is recognized immediately and works perfectly. Can you please help me with this? I really want to me able to use the headset on my MBP.
    I have emailed Logitech several times and they have been unhelpful!

    Either read the headset user manual or contact the vendor.  You should also try posting in the Bluetooth forum area.

  • Satellite P75-A7200 headphone jack not recognized at all

    model number PSPLNU-00H004
    i've tried updating all drivers etc, still will not pick up headphones when i plug them in. scanned for new devices in device manager and it just sees microphone and speakers, nothing else.
    any help would be appreciated

    I am having a different headset related problem. the headset I am using is a turtle beach X12. the headset works like its supposed on every system I plug it into EXCEPT my new P75-A7200 with windows 8. the problem being very very low volume. this is a powered headset and even with the system volume at 100% and the headset volume at 100% all sounds are slightly above normal speaking volume. and if there is any backround noise at all I cant hear my game or movie at all.
    I have gone through the system settings and made sure all volume setting were at thier max and still the volume is too low.
    if I plug my headset in to any other system I own, be it my xbox 360 or my wifes laptop or even my desktop. I have to turn the system volume down. a LOT or risk having my ears blown out.
    I'm hoping its just a software/driver issue and that its not because of a low cost cheaply made sound card.....

  • Re: Satellite A205-S5825 - DV Camcorder not recognized by firewire

    I have a Satellite A205-S5825 and I cannot get it to recognize my Canon DV camcorder connected by a firewire cable.
    The same camera works perfectly with my desktop PC. My wife also has a Satellite, an A215 and this does not recognize the camcorder either. All 3 computers are running XP service pack 3.
    Can anyone throw any light on this? I would really like to use my laptop for video editing as my desktop is at another location.
    Thanks in advance
    600

    It is really strange. I would like to know if this will happen with factory settings.
    I have camcorder too and I have tested it now with Vista preinstalled P200 and WXP preinstalled Satellite Pro P300.
    On both notebooks the cam is recognized properly and I was able to record short movie.
    I really don't understand what is wrong there but try to remove firewire port from device manager and restart your notebook.
    The firewire port will be recognized and installed automatically. After doing this connect your cam and test it again.

  • Dragon Dictate headset not recognized by V3

    The usb headset came with Dragon Dictate v3.  After defining the Profile and proceeding to Training, I am instructed that I need to attach the headset!!!
    I have been a user of Dragon Dictate since its inception  ... it isn't me!
    Frustrated Chuck

    Linc,
    Thanks for your response.  Yes, other USB devices do work.  Checked the Dragon microphone on  System Preferences > Sound.  The output was bad unless the Alert Volume was at max ... and even then not loud.  Input was low.
    I do have another Dragon microphone and that works fine as per System Preferences > Sound!  Tried to use it with Dragon Dictate with same results as in my query.
    In a related issue,  I also have a Sennheiser microphone which has superb audio characteristics but is not USB.  I used it for many years, since Dragon Dictate was released.  Now, however, Dragon dictate gives the same respoinse as above.????
    Any input or suggestions?
    Chuck

  • Satellite A500-14K - USB key not recognized with Windows 7

    I have a Toshiba Satellite A500 14K, it was pre-installed for Windows 7.
    I have purchased the Windows 7 upgrade: I received one disk for PC upgrade et one disk for windows upgrade. I have launched the first disk, and then the second one.
    There was no special error message during these installations.
    Since this upgrade, my PC doesn't recognized the USB keys whereas they work perfectly with the previous windows version with this pc .They are normally plug and play usb keys. When I launched the windows update, a driver is found, but the installation failed in error with a message of access problem.
    I have check that the firewall doesn't block the access. I have installed the last version of the BIOS
    I don't found any similar pb on the forum
    thank you for your help

    Not BIOS update but chipset utility.
    Problem is that this notebook model is not supported for Windows 7 32bit but for 64bit only.
    The same chipset is used on Satellite L500 and it is supported for Windows 7 32 bit so you can try to install THIS chipset utility.
    Bye

  • Satellite C50-A - HDMI TV not recognized

    Dear all,
    I just bought the Toshiba Satellite C50-A-U19 (pscg6e) with windows 8 64bit 3 days ago. The HDMI connection to my TV worked for 2 days, but right now the laptop does not display the TV as a device.
    I've tried several booting sequences, and tried to "find new hardware" in the device manager. I've changed HDMI ports on the TV. Still, there is no sign that the TV is recognized. I've tried using <winkey> + <p> but because no additional monitor is detected nothing happens.
    I've changed the HDMI cable, and tested the cable (and the TV HDMI port) by using a playstation.
    I've downloaded and installed the latest display drivers from the toshiba website. I tried using the device manager to see if any additional updates are available, windows tells me i've got the latest drivers already.
    I've used the "restore system" function to set the configuration back one day, but to no avail. I've spent about 3 hours trying to solve this problem and I'm so frustrated right now.
    I'm absolutely clueless what else i can do at this point to get the HDMI to link up with my TV. All help will be greatly appreciated. please please please help me!

    Thanks for your reaction.
    I've not created a recovery media. Can i still do this or is it too late by now? Is it possible for me, after using the notebook for a week, to reset to " factory settings" or only to reset to the ssettings i have right now?
    I should also note that the problem changed for a bit. First of all, i used the recovery feature again and the HDMI output worked for about a day. The next time i booted the notebook, the HDMI was recognized when the TV was switched on a non-HDMI channel. As soon as i switch to the HDMI channel on the TV, my laptop screen went black for a second (to readjust i guess) and it no longer recognizes the TV at all. It acts like it is not connected.
    when the TV is on a non-HDMI channel, i can make the laptop screen go blank by using the screen option "only second screen." As soon as i switch the TV to an HDMI channel (making it unrecognizable for the PC), the laptop screen turns back on.
    WHen i switch from the HDMI back to non-hdmi, the laptop won't recognize the TV again. Only when i power down and restart the TV it is recognized (but only as long as i'm on non-hdmi channels).
    Message was edited by: rivvyriv

  • Error: USB Headset not recognized

    HP Pavilion dv7 Notebook PC  WV703AV
    OS: Windows 7 Home Premium - 64bytes
    Error: No error... just not working
    Hello, I just bought an USB headset SOMIC and after plugging it to the PC I realize it wasn't working. At the beginning I got mad thinking that it was about the headset, however after testing it in several computers with different Operative Systems(windows 7 x64, windows XP x32 & x64) I realize that actually they worked perfectly... so whats is coming on with my PC? - I thought.
    I tried by doing the following:
        1st - Changing it of USB Port - I tried the 4 of them.
        2nd - Updating the sound Drivers.
        3rd - Installing the Headset's drivers.
        4th - Downloading & Reinstalling the sound drivers.
        5th - Disabling the computers drivers in order to only use the headset's drivers.
    I am getting so angry that I am planning to reinstall my OS, however before doing it I would like to know if you could help me in this matter . It is clear that it is ABOUT THE USB CONDITION OF THE HEADSET as I have others with normal connectors and they work perfectly. Moreover, I JUST REALIZE that AUDIO BEATS monitor the sound settings and it has NO USB CONNECTOR COMPATIBILITY (only HDMI or NORMAL MALE CONNECTORS).
    So I tried disabling/uninstalling HP BEATS however it doesn't appear anywhere. Now I dont know what can I do to sort out this issue I am having please help me before I burned my PC . Pleasee I really need your help.
    I look forward to hearing from you, thanks in advance.
    Santiago.

    I too have this problem. Bump.

  • Satellite L735 - WLAN card is not recognized after own OS installation

    Dear sir,
    I have the laptop satellite L735-M14X Part No: PSK0CE-04X01RAR ,SERIAL NO: YB321818W
    My laptop was windows home premium 64 bit arabic and very slow and I wanted ultimate english so I made a format and installed win 7 ultimate 64bit , and after I installed all the drivers shown in the enclosed picture 4
    but the wifi still not working for a wireless internet connection!! (I updated the bios from 1.8 to 2.2 and installed the Value added package and enabled the wireless but nothing enabled )
    so I saw that there are 2 missed drivers as in the enclosed picture 1 & picture 3 and I didnt find the required sofware for them.
    also when I was installing the driver "widipl-20110323155916" , a problem occurred so please check the picture2
    Please find a good solution without recovery!
    Awaiting your soonest help and support
    Picture 1
    [http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]
    Picture 2
    http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.png
    Picture 3
    http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.png
    Picture 4
    http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.png

    Notebook specification [url= http://gulf.computers.toshiba-europe.com/innovation/en/product/Satellite-L735-M14X/1118017/] click here [url].
    There is written - Manufacturer : Atheros
    Download and install Atheros driver version 9.2.0.419.0
    Please let us know if this will be OK.

  • Satellite L650-12Z: Led does not light up when connected to power source

    My L650 does not show the white light anymore when the cable is plugged in.
    The connectors are clean, and the adapter is working.
    The laptop does still run on the battery ( when there was still power in it).
    Also without the battery, there is no white light indicating that the laptop is connected to the DC.
    Does anyone know what the problem could be and how to solve it?

    Thanks for your reply.
    Unfortunately the battery does not charge when connected.
    Only when connected with the full battery it is working.
    I have measured the adapter with my multimeter and it seems to be working properly.
    Like you said, letting a technician look at it would be a smart idea.
    I decided to send it to a service center in my city, in about 4 weeks I would have the notebook back they said.
    Weird thing for me still is, that around three weeks ago the same happened. Windows said the power was not connected. But after plugging the power in and out a few times it worked again. Maybe this is a symptom of something?

  • Satellite M100 - DVD-Multi-Drive not recognized as CD/DVD recorder (!)

    Hello,
    after installing Win XP SP3 in the last windows update, the Toshiba tools as well as other CD/DVD-burning software don't recognize the DVD-ram drive as such, only as a CD-rom-drive.
    Thus, software like recordIt doesn't work.
    I have already removed the drive from the hardware list and have reinstalled it.
    The driver used is "Mat****a DVD-RAM UJ-841S"
    That is correct, so far. But it doesn't burning CDs/DVDs.
    Has anyone noticed this problem as well?
    Thanks.
    Bjoern

    Hi
    I think its a lower upper filter issue and I think you could solve this following this step by step instruction.
    First of all remove the ODD (CD/DVD) drive from the list in device manager.
    Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Finally you should reboot the unit.
    After that windows will recognize the ODD again

  • Usb headset not recognized

    hey guys, i have a pair of razer kraken 7.1's and i was trying to get them to work with skype. i have them set up as default player etc, but skype doesnt recognize that they are there. it also says 'this app is unable to send to other devices' under devices. any help? thanks

    I too have this problem. Bump.

  • Satellite L25-S121 CDW/DVD not recognized

    I have uninstalled and reloaded.  There is always an error.  I got upgraded drive software.
    Attachments:
    20100213.txt ‏1 KB

    Hi Filiep,
    PLease check in Device Manager to see if there is anything showing against your CD-ROM device. If your CD-ROM is still shown you should be able to run the Troubleshooting process against it to check for any errors.
    If your CD-ROM is no longer listed then run the 'Scan For Hardware Changes option' to see if this detects your CD-ROM.
    HTH

  • USB microphone not recognized by mbp, retina, late 2013, 10.10.1 Yosemite.

    I bought a Behringer Xenyx302 USB preamp to connect a microphone to my mbp.  The device is not recognized by MacOS.  Preferences / Sound / Input only lists the internal microphone.  Based on other posts and documentation, I should see and entry for "USB microphone" or something like that.
    The preamp has a headset jack.  I can hear the microphone working through that, so I know the mic works.
    Behringer doc says that no drivers or software are required for MacOS.  15" mbp, retina, late 2013, 10.10.1 Yosemite
    Any suggestions?

    Yes I have checked Parallels config along with Parallels support.  Also on the mac side it also does not see or recognize USB 2 devices
    any other thing to try?
    Rich

  • Satellite L650: Some combinations with the FN button do not work on W7x64

    Hello,
    System
    <h3>Satellite L650-1KU</h3>Part number
    <h3><span class="partNo">PSK1LE-01700MRU</h3>
    I have install Windows by myself - this laptop haven't any OS from factory.
    Installed Windows 7 x64, all drivers and utilites from Toshiba driver site for windows 7 x64 accessible for my laptop model.
    I have no any unknown devices in Windows Device manager, all drivers installed and all hardware components woks fine i.e. wifi or bluetooth or web camera.
    But I still can't use some of keyboard combinations with Fn button. Not all, just five combinations do not work: Fn+F2 power modes, Fn+F4 hibernate, Fn+1,2 zoom and Fn+F8 wirelles devices.
    From search I have found only mentions about Fn+1,2 zoom - this funtion provide some util named Toshiba Zoom but on download page no any Toshiba Zoom for my laptop model and W7.
    Looks like there must be installed some additional utils from vendor for handling this combinations but I cant find any additional info or soft on driver download page.
    May be there are some utils what shold be located in lists of drivers/soft for 32 bit windows and it will be fine for 64 bit one?
    All combinations which works fine like volume +- Fn+3 Fn+4 or mute Fn+ESC does not shows any popus at moment of pressing, just <span class="short_text"><span class="hps">perform <span class="hps">its <span class="hps">function <span class="hps">without any indication.
    Dear users and support, can you help me what I should install from additional utils to provide support for combinations Fn+F2 power modes, Fn+F4 hibernate Fn+1,2 zoom and Fn+F8 wirelles devices?
    Message was edited by: Gimli_r

    Have you installed the Toshiba Value Added Package?
    Have a look on the Toshiba support/downloads website. Ensure you install the Win7 64bit version of TVAP designed for the L650 series.
    Updating the BIOS may also help.

Maybe you are looking for