Satellite L650 PSK1JA - WLAN not turning on / Unable to install WLAN

Can anyone help with my problem here? I've been trying for three days straight and still unable to find a solution.
My laptop, Satelite L650 PSK1JA-07E017 hasn't been able to connect to wireless recently.
I just reformatted my laptop again today (due to other problems) and now I found out
1. Initially, my toshiba (Out-of-Box-state) laptop has no WLAN driver installed, as the moment I checked Network Sharing Center, I only can see LAN (Atheros Ethernet AR81). (How did I connect into wireless all this time?!)
2. So knowing this, I tried to download several drivers (Atheros/Broadcom) WLAN, however.
- The Atheros WLAN driver seem doesn't want to install. The moment I run the setup, nothing happened.
- The Broadcom WLAN (802.11n) actually worked once, however the moment I restarted my laptop, Broadcom disappeared from the *Network Adapter list*
Both driver were taken from main website "Download" Support
I have been trying to find a solution, sometimes the broadcom WLAN works, sometimes it doesn't, at least until today.
Even if it works, it would connect to the Network only for about 5 minutes or so, and after that, the connection would go "Unable to connect"
Now today
1. The wireless network light wont even turn on (That orange light). The moment it would blink is the moment I turned on my computer, but after the TOSHIBA Screen (The screen where you choose to go to your BIOS setting/BOOT), the light suddenly turned off.
2. And when this light is turned off, I'm unable to enable it, as there's no WLAN driver on my computer (Heck, how does the light turn on?!). So FN + F8 Button is totally disabled.
3. No matter how many times I install WLAN driver, it's either
- Setup didn't do anything, no response, nothing happened (Atheros WLAN driver, all of them)
- Setup worked but wont be listed as Network Adapter.
4. I saw a forum answer talking about TBSWireless that's located in Toshiba folder, I tried and there's no response at all, nothing happened, nothing popp'ed up.
I used to think that it's caused by overheating, but apparently I don't think it's the cause anymore (as my laptop is totally cold right now)
This problem first time happened a year ago, but never pop up again until this year. Normally it's just reseting Network Adapter and it's all fixed. However, given now I don't have WLAN driver (Hence my connection is a box with red cross) there's nothing I can do. I can't install it, nor I can't do a single thing about it.
If there's something that I need to install first (before installing those WLAN driver) can anyone outline that for me?
and apparently my warranty has expired sometime last year so I can't really ask Toshiba to repair it (Unless I pay)

Installing Ubuntu is WAY easier than windows, same for installing packages (additional software ; although I doubt you'll need to do that).
Two choices:
1) Use WUBI (Windows Ubuntu Installer) which is just like installing another windows application on your harddrive. I have this, works great and still good for diagnosing h/w issues. It makes a dual boot menu so that you can choose windows 7 or Ubuntu from boot up.
Start download, run installer... follow prompts, easy. No mess no fuss.
Just go for recommended settings. My initial installation was 18GB but you can go for smaller if you want.
http://www.ubuntu.com/download/ubuntu/windows-installer
Side note: The application installer is an icon half way down on the left hand side in case you need to install anything additonal. I don't think you will, unless you want to play with Ubuntu.
2) Install onto USB or CD and boot onto that.
Follow instructions on this page:
http://www.ubuntu.com/download/ubuntu/download
Go for version 11.10 (latest version), 32-bit (recommended).
Either 1) or 2) will do the job. 1) is probably marginally less work.. you can't really call installing Ubuntu work. If installing windows was like installing Ubuntu no-one would have any problems.
OK. Once you re-start and boot into Ubuntu the network icon is on the top-right. Looks a bit like a triangle.
There are two great really free PDF books on Ubuntu in case you want to know more:
http://www.ubuntupocketguide.com/download_main.html
http://files.ubuntu-manual.org/manuals/getting-started-with-ubuntu/10.10/en_US/screen/Getting%20Started%20with%20Ubuntu%2010.10.pdf
You shouldn't need to read them though, just follow the on-screen instructions the installer gives you and then treat Ubuntu (once you boot into it) it as if it's like windows.

Similar Messages

  • Re: Satellite L650 PSK1JA: cannot play 2nd Life due to old GPU driver

    Hi,
    i have a windows 7, Toshiba Satellite L650 PSK1JA-0K4017, video card is ATI mobility Radeon HD5650 and Im unable to use second life ( everything in the worlds is a pink colour) and its unusable because i need an updated display driver
    I have tried the AMD website and am unable to install their drivers as they say they are not compatible and i need to obtain my driver from the manufacturer (toshiba)
    Trouble is that Toshiba display driver is very outdated 15/03/2010
    When are they ever going to update this particular driver and if not does anyone know of a workaround for this issue.
    Why is the driver so old.?? If i cant fix this issue i'll be purchasing a new laptop and it definitely wont be a Toshiba again. Useless if they never update their drivers.

    I think you have to understand that the L650 is a 2010 / early 2011 model - support would have been offered through the product life cycle and for some time afterwards. Most vendors will issue updated drivers where it solves a problem NOT just because to component manufacturer has "tweaked" it and made it version 2.1.1.1.1 rather than 2.1.1.1.0 ie "why fix something that isnt broken" which can make new issues
    In saying that i have updated AMD drivers using the AMD reference drivers many times on Toshiba's where the Official Toshiba driver is outdated and have not had an issue, even if there was one you just boot into safe made and reinstall teh original driver - either the one the one the unit shipped with in the TOSAPINS folder or download the last Official update from Toshiba prior to trying the AMD sources driver.
    Or sometimes you can download the latest AMD Catalyst Control software from Toshiba - just choose a newer model ie L50D - this gives you the option of either unpacking the driver to a Temp location where you can manually install OR automatic install - automatic install may check the model and fail so you may need to manually install as per previous post.
    just bear in mind Toshiba has one of the best reliability scores in the industry - choosing another brand due to 3+ year old unit not having Official current drivers is totally your decision, and buying a brand that is more likely to have a major fault within 3 years is a choice you are welcome to make - from my eperience the choice is easy :)

  • Hello, buy a membership for 1 month photoshop cc for my pc but I can not turn, I still ticking install the trial version, what I can do?

    hello, buy a membership for 1 month photoshop cc for my pc but I can not turn, I still ticking install the trial version, what I can do?

    sign out and then back in to your cc desktop app (using the same adobe id used to pay for your cc subscription).  Sign out, Sign in | Creative Cloud Desktop app

  • No network access on Satellite L650 (PSK1JA)

    Hi,
    I have an L650 Satelite laptop PSK1JA-0ED017 that is having trouble finding network devices.
    The history on this laptop is.... Hard drive failed, so a replacement was installed and OS (Win7 home x64) was reinstalled from recovery discs created at time of purchase. The laptop has been working perfect for about 2 months, but suddenly would not load drivers for LAN or WLAN.
    I have tried uninstalling and reinstalling, using the existing driver, and also downloading the driver set from Toshiba. I still get the "Windows was unable to load drivers for this device Error 31" message. I suspected a hardare fail, but managed to reboot and get running the old HDD and was able to see the available networks, so this ruled that theory out.
    I then suspected Virus or Malware, but ran scans for them and nothing found.
    Can anyone suggest how to remove all traces of the existing drivers so that I can reinstall with fresh downloads to check there is not a corrupt file causing this.
    I tried plugging in a USB Networks device and also get the "Error 31, Windows cant load driver". Im starting to think its not a specific network device driver, but some other driver to do with the nework interfaces.
    I tried doing a Sysrep to get it back to OOBE, whilst retaining all the software data that we have installed / copied, but this failed and I was unable to complete it.
    I really dont want to have to do a OS recovery, but I will as a last resort.
    Any help appreciated.
    Jon

    Hi Jon
    I use Toshiba laptops several years now and I was never faced with such problem, especially if notebook is preinstalled with original recovery image. Recovery image contains tested drivers and they should work. I have noticed that Windows update offers for some models WLAN driver as optional update. I hope you didnt install it.
    Googling around you can find numerous links and forums discussions about such issue. You can check what other people write about it but if you cannot fix it with driver reinstallation I presume there must be some problem with registry entries. It is pretty complicated to clean it up especially for someone who doesnt have enough experience with this.
    In my opinion you should back-up all your data and reinstall recovery image. Start to use notebook with clean preinstalled OS and make from time to time restore point.
    I know it is the last option but easiest and most effective.

  • Satellite L650 - ODD does not read most of CDs or DVD's after BIOS update

    While copying DVD's I was asked to do a bios upgrade from the software that came on my laptop, so i thought coming from toshibsa it should be safe. I closed all my applications and let the update happen, restarted my pc and tried to continue to copy my dvd's.
    Now my dvd writer does not read most of my cds or DVD's,originals as well.
    I have managed to get hold of my previous Bios version after quite a battle before the update to see if i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it.
    Any help would be greatly appreciated as i have two days to copy 100 DVD's for a client and i am unable to do this now,
    I have a Toshiba Satellite L650 laptop running windows 7 64 bit 8 gigs memory with a SSD Hard drive

    > i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it
    I dont think that BIOS is the problem here the point is that the CD and DVD support details are stored in the CD/DVD drive firmware and NOT in the notebook BIOS.
    So in my opinion the BIOS update is not the reason for your issue.
    I think you should check if laser lens cleaning would help you to read the disks.
    Use an cotton wool tip and alcohol fluid to clean gently the laser lens.

  • Satellite L650-111 is not listed in Toshiba's support

    I have Satellite L650-111 ( part number PSK1JE-00E00PY4) and when I try to access Toshiba support page for my computer
    there is no success. Even if I try to use "detect your notebook" there is no success.
    In whole Toshiba site(s) I could not find my notebook model.
    WHY????
    I'm very disappointed whit this situation, even more because that I had Toshiba Satellite A80-129 and whole
    set of drivers and support are listed.
    regards
    disappointed user

    Hi buddy,
    To be honest I dont understand your problem. I mean if your notebook will not be detected due automatic detection tool you can still search for drivers yourself. This takes one minute only.
    Your model belongs to PSK1JE series and therefore you have to search for L650 and PSK1JE downloads. Thats all! :)
    If you have more questions, please post again!

  • Satellite L650-11F is not suported in service page

    I can't find anything about Satellite L650-11F in service pages. ?f u have any idea please help me.
    I bought this notebook however I can't find any knowledge abou it in Toshiba web pages.

    I dont know what are you searching exactly but if you need drivers for supported operating systems you can find them on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    Choose there
    Notebook
    Satellite
    Satellite L Series
    Satellite L650
    PSK1JE (this number you can find on the bottom side on Toshiba sticker)
    Choose operating system and SEARCH
    If you have more questions let us know.

  • Powerbook G4 17" will not turn on with battery installed

    Hello,
    My PB will not turn on anymore. The battery was down. I bought a new battery and it is loading properly (except for the light on the adapter is always green while loading). But when I try to put the PB on, with only the battery installed, nothing happens. I just hear the fan is turning on, but it will not start-up.
    If I remove the battery and plug-in the adapter the PB starts-up normally.
    It's strange, I really thought i'd solve the problem with a new battery, but it doesn't help.
    Anybody know what is going on here?

    I have the same problem with my 17" Powerbook G4. I replace the PRAM battery and that did not work. I took it to the local Apple store to have them take a look at it the the tech said he had never seen one act like this. He told me that his guess was the it is a bad logic board. Not sure I want the put that kind of money into it. Its a good laptop but the logic boards are high in price. One thing I though about doing just to see is to replace the DC in board. There is a web site call powerbookmedic.com that has them for 50 bucks. Its the same place I got my PRAM battery.

  • NAS200 will not turn on with HD installed

    My NAS200 will not turn on with the Hard Drive installed, but will turn on and boot up without the Hard Drive installed.  There was just a storm and we did loose power.  I did not have the NAS200 plugged into a battery back and I unplugged it from the wall after we lost power.
    Since it turns on and boots without the Hard Drive installed, could the problem be with the Hard Drive itself?
    Does anyone have a recommendation?  I am affraid i lost everything on my Hard Drive and that my NAS200 no longer works.  Can't afford to purchase a new NAS200 or Hard Drive at this time.
    However, I did go out and purchase a surge protector/battery backup today.
    Please Help.

    It may be a problem with the hard drive.
    One way to check would be to connect the hard drive directly to the PC and see if the PC detects it when it boots up.
    Can you ping the NAS200 when it powers up without the hard drive connected?

  • Satellite L30-PSL33 does not turn on from hibernation

    Hello,
    as i mentioned in my previous post i also have a problem with hibernation.The thing is that when i leave it to hibernate and turn it on later sometimes it doesn't load Windows-the loading bar reaches its end and then it stops "thinking" so i have to shut it down and start it ...
    The OS is Win Xp Pro SP2 on Toshiba Satellite L30-PSL33.For example it loads Windows from hibernation 2 or 3 times and then after that it won't load the OS.
    Please give me an advice how to fix that..
    Thank you

    Its not easy to say whats could be wrong because as you said this issue happens sometimes and therefore its not easy to replicate this fault.
    Im an owner of a Sat L30. I use the Vista on my L30 and did not receive any similar problems.
    I talked to some people and read also on some computer websites that this error could be software related.
    One question; what OS was preinstalled on this notebook; XP or Vista?
    Maybe you have to update the OS on your notebook to the latest state.
    Please also check if any 3rd party programs dont affected the OS badly.

  • Brand New Out Of Box Satellite C655-S5307 Will not turn on , black screen

    I got this http://us.toshiba.com/computers/laptops/satellite/C650/C655-S5307/
    A Toshiba 655-5307 laptop for my sis for Christmas.
    She said she charged the thing overnight and went to turn it on, the green led power light came on I heard fans come on, black screen then shutdown.
     I got this laptop 1300 miles away while I was working out of state thought it would be a great gift.
    Please tell me this is a minor problem and easy to fix

    try to keep turning the laptop on while it has a charge and is unplugged until the battery completely dies and leave it to sit for 5 days unplugged but with the battery inserted.  Dont touch it or try to turn it on while it sits and the batt loses its charge.  Then plug it in and see the orange charging light.  immediately hit the power button.  The pc may try to boot and fail, but it might actually boot for real!  mine did.  I have seen this problem in this particular model posted all around the internet.  But it seems to turn on only if the battery is completely dead.  hmm.  

  • Satellite Pro L20 will not turn on

    Hi,
    I was using my laptop yesterday when my baby son pulled out the ac adaptor cord from the back of the laptop, when i went back to it, it had turned itself off, i have tried to turn it on with no sucess, i have no lights nothing.
    not even the light to show the laptop is on charge is working.
    its like its completly dead (i hope not)
    Any ideas??
    Regards,
    qube

    I would take the battery out so there is no power going into there at all, then hold down the power button for 10secs to clear the capacitors then reattach the battery and try again.
    If not I would take out the battery again and plug in the mains and try turning it on without the battery in.
    James.

  • Satellite L650-12Q does not start up

    I have a toshiba L650Q laptop. Its been working fine since 1.5years now..
    Just a couple of days back I closed the laptop ie closed the screen ( typically it puts the same in sleep mode).
    After about 10 min when I tried to open & start up the laptop simply does not startup :(
    I can see the battery & power adapter LED glow, but when I press the start button, it simply does not start..
    there is momentary glow of the power on button, i hear the fan trying to start up & then it dies down in abt 2 seconds & laptop simply does not start up..
    I tried the below troubleshooting steps but no success
    1) I removed the battery & tried starting using the adapter, it dint start up
    2) I put the battery out for like 1 hour & then tried again, it dint start up
    Please advise the troubleshooting steps or any pointers as what could the problem be & how can i resolve it..
    Message was edited by: dhiru23

    Try this:
    - Remove the battery and disconnect the AC adaptor.
    - Press power button 30sec long
    - Connect battery and AC adaptor to the notebook
    - Try to power up the unit.
    If this fails, check the memory modules.
    Remove one module and try to boot the notebook using one module. Run the test for each slot and module.

  • HP Officejet Pro L7580 not recognized and unable to install

    Hello everyone,
    We purchased a MacBook Pro and for sometime we had it connected to our HP Officejet Pro L7580 using its usb connection.  This MacBook Pro is running Mountain Lion software with the current printer update.  We moved and relocated our printer to a more suitable room.  In our house we have two routers.  Our main router is Actiontec MI424-WR and the secondary router is  Dlink DIR 655.  The Dlink is connected lan-to-lan with Actiontec. The printer is connected to Dlink router which is downstairs.  I have spent considerable amount of time figuring out why our MacBook Pro doesn't recognize this printer.  We have other computers at home that runs in unix (Ubuntu) and windows (Windows 7) and those computers are able to print, scan, and fax to this computer without problems.  The connections to all computers are the same which is wireless.  I have read a lot post in this community and as well as HP community and it doesn't provide any solution to this problem.  I am able to ping this printer from the MacBook with no problem.  When I install this printer using ip method the scan option is not there.  However if I bring the computer downstairs and install it using usb the scan option appears.  I am thinking that HP didn't provide a driver for scan option if you're connected wireless or ethernet.  But I found out that the current drivers for mountain lion for this particular printer has a scan capability.  I need some help in figuring out what's going on with this.  I would like to be able to scan using this laptop where I don't have to physically connect it to the scanner.  I am completely lost with Mac.

    Apple support:
    Network Printer Troubleshooting
    Reset Printing System

  • How to upgrade firefox in Ubuntu 10.04? Upgrade button is not present and unable to install the downloaded latest version.

    We have around 250 desktops where we have installed Linux Ubuntu 10.04, now the problem is that the Mozilla Firefox version in Ubuntu is 3.6 and the application we are using does not work correctly unless the firefox version is higher then 5.0, I have tried many times to upgrade the version but failed. So I would like to know the actual process of how to do the upgrade, I am not familiar with linux which has increased my problems. Please suggest

    https://support.mozilla.com/en-US/questions/886524

Maybe you are looking for

  • New to Mac - Issues with imported Excel Docs

    Imported my Excel docs from my PC and they made the trip but when I open them, some don't work properly. I have some billing statements that I made with Excel templates. Whenever I open and try to save them, I get an error message: Users/JaneDoe/Docu

  • Primary key issue

    Hi all, I'm new here, and I have a stupid problem, I think. If someone could help me, I'll be grateful. I have to build a very simple JSP application using a few database tables, providing the base functionality: insert, update, delete, search. I'm u

  • Error when select statement was gien

    i gave select count(*) from <tablename> on a table.i gort error ora -01578: ORACLE data block corrupted (file # 12, block # 15712).i gave statement alter session set events '10231 trace name context forever,level 10' created the table again from prob

  • Firmware Release Notes

    My company has just received a number of new BB 9300's and I've noticed that the firmware isn't up to date on them.  So I've downloaded and installed the latest firmware (977), but can't find any release notes to say what's been fixed/improved.  Can

  • Prod Env prob

    We have Weblogic 8.1 on solaris platform and have a critical application one managed server.This application/server is hangs up quite often ,like 4,5 times in a week.There are 400 execute threads and 3 reader threads.Most of the time the execute thre