Satellite L655 - black screen upon powering up

My L655 Satellite went black last night...now when i go to turn it on it goes through the motions but only a black screen appears after starting in safe mode.
Any suggestions?

Hi
Im a little bit confused
How can you start the notebook in safe mode if the screen is blank?
Are you able to see something on the external monitor?
Usually you can switch to the external monitor using keys FN + F5.
But this is possible only if the windows has booted up.
Are you able to access BIOS pressing F2 immediately after the notebook has been powered up?

Similar Messages

IOS app rejected due to a blank, black screen upon launch

I recently got my iPhone app rejected and the reason is below:
"We found that your app exhibited one or more bugs, when reviewed on iPhone 5 running iOS 6.1.3, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
Specifically, the app displayed a blank, black screen upon launch. Please see the attached screenshot/s for more information.
The steps to reproduce are:
1. Launch app
2. Bug encountered"
I use FlashDevelop and the latest Apache Flex + Air SDK 3.7 + swfversion=20. I don't have an iPhone 5 to test on but I've tested the application on a 3GS, iPod touch (4th gen.) on IOS 4.3, 5.1 and 6.1.3 (latest) and the application works on all of them.
The attached screenshot mentioned above is here:
the "blank" screen is actually a deep blue one, which the color I've set to my project's background.
I didn't make any special modifications in the code to support iPhone 5 to be honest, and the project dimensions were set to 640x960, but I did include the [email protected], and it shows inside the .ipa at Payload/Myapp.app/
In almost all the iPhone 5 discussions I've read online, theat launch problem is due to the [email protected] not being there in the root of the release .ipa, but I'm sure it does exist on my ipa. Also, I have request high resolution set to high, and the Info.plist has the correct DTPlatformVersion (6.0) and DTSDKName (iphoneos6.0).
Any ideas what the problem could be?
Thanks.

Remember - they gave you a very specific device and version. It might be working on all other configurations. So if you are unable to get your hands on that device and version you are going to be left stabbing in the dark as to what is going wrong.
My advice would just be to figure out what's different with that device and make sure everything is configured properly.
Another option - if you don't want this app on the iPad anyway - is to remove it from the configuration:
<key>UIDeviceFamily</key>
<array>
<string>1</string>
<string>2</string>
</array>
You would delete the <string>2</string> part.

Black screen upon waking Mac

Mac Mini 2011 with 2x4GB RAM, 2.3Ghz i5, 500GB 5400RPM HDD
So I need some help regarding my Mac and it's driving me mad! Its a bit tempermental and it isnt always the same occurance each time, but basically symptons are (somtimes it occurs, sometimes not with each one!):
Turning on It will freeze on white screen (no logo)
upon waking up from sleep it will display black screen with mouse and notifications. no login UI or wallpaper. Can SOMETIMES login if i just type password (as if login screen is still there). mouse dissapears once typing begins
Sometimes when the previous event occurs (^) and i put computer to sleep it will then do the opposite and display just the wallpaper with no input from mouse, keyboard
I have tried removing all devices (webcam, USB mouse etc) and turning on computer but as its tempermental
I have also reinstalled a new OS X over the top from internet recovery
Also reformated HDD and restored OS X.
Also reset SMC and NVRAM.
Also checked in
/private/var/run/StartupItems   -doesnt exsist
/Library/StartupItems - nothing in this folder
/System/Library/StartupItems - nothing either
/System/Library/LaunchDaemons - Loads of files in this folder
/Library/LaunchDaemons - only a few files
Also only 3rd party pref are Java and Flash.
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          DivX Web Player: Version: 3.0.1.5 - SDK 10.5 3rd-Party support link
          Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          SharePointBrowserPlugin: Version: 14.3.4 - SDK 10.6 3rd-Party support link
          Unity Web Player: Version: UnityPlayer version 4.1.5f1 3rd-Party support link
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Java 3rd-Party support link
Also run the AHT extended test, no issues detected.
Also set "sudo pmset autopoweroff 0" and "sudo pmset standby 0" in Kernal.
Also repaired disk permissions, it only repaired the printer stuff.
After i gave this in kernal, i then reset SMC again to check.
Checked console and noticed a 40 second gap before this error:   "05/02/2014 07:03:00.266 configd[55]: inet_set_autoaddr(en1, 1) failed, Resource busy"
turned off my WiFi and issues still persisted.
This had previously been on forums last week in Mac Mini section with the help of 'BDAqua' however im out of options and need some more help. If anyone could be helpful enough to give some suggestions on why my screen is black upon waking up (exc. notifications. they appear) and most time i need to hard reboot (sometimes i can type in password and it unlocks).
I can not afford to start fresh, i have a 110GB iTunes Library with 210 iOS apps and photos too important to me to be forgotten.
PLEASE HELP ME

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Black screen upon wakeup after longer sleep...

In the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in).
This did not occur until I got 10.7.3 and only within the last 2 months.

Anyone?
I am up to 100 crashes upon wakeup now. Various versions of Lion 10.7.x. I have done clean installs as well.
Does anyone else get the black screen of death shortly after wakeup from sleep?
This never happened on 10.7.0, 10.7.1 or 10.7.2
Crashes happen in both 10.7.3 and now 10.7.4, and for sleeps as short as 90 minutes.

Black screen upon waking

Twice now since installing 10.5 my Mac has woke up with a black screen, forcing me to hold the button down and attempt rebooting several times. Is this a known problem?

I can confirm the same problem here on a PowerPC Dual G5 with 2 Apple Cinema 23" monitors on both Tiger (10.4.11) and Leopard (10.5.5). The secondary monitor is blacked out upon waking from sleep and/or reboot, yet it appears in the Displays Preference Pane. Mirroring the displays or changing its resolution does not help.
Now, when I plug and replug the monitor's DVI, I get this in the console...
Sep 29 10:51:41 XXXXXX kernel[0]: USBF: 198.392 AppleUSBHubPort: Port 2 of Hub at 0x4b300000 reported error 0xe00002c0 while doing getting port status (2)
So, apparently it's a USB issue. Did a quick search on this forum, but I havn't found out a solution yet.
Any clues!?
Message was edited by: Mircea Turcan

Satellite L750 black screen on start up!

After using my new Laptop for three weeks (and only for 3 hours per day) suddenly one morning I pressed the start button and the only thing I got was a black screen with nothing else .No cursor , no sound , nothing at all , only black screen. Please I need help

I have the same problem with this Satellite L645-S4102. No Toshiba splash logo on startup. Just a black screen. There were BSOD problems before I got this laptop but I can't even get the laptop to bootup to even try and repair it. The laptop is out of warranty. On startup, it checks for usb bootable or DVD bootable disc (lights come on, but that's it). any help would be greatly appreciated. I tried taking out the batteries and leaving it for over an hour, held the power button to drain any static electricity, then put the lithium battery and laptop battery in and still get the same results.

Satellite L300D - Black Screen on start-up

Hi Guys, I need some help please. On Thursday I was on my computer and noticed the time was wrong I thought I must of done something wrong and was going to fix it. I went to restart my computer but it wouldnt boot just had a black screen. I knew I hadnt damaged the screen. After a bit of googling I read about taking the battery out and plugging the charger in and low and behold it worked!
On Friday I charged my battery up for an hour and put it in the computer and that worked too so I thought the problem was solved.
Unfortunately today my computer will not start at all with or without the battery in still get the black screen. The fan is going but apart from that its very quiet. I tried putting the cd in to see if that would do anything but it didnt.
Any suggestions please?

When I first got theToshiba Satellite, it came with Vista. It was UNUSABLE! I mean that I would have to restart it by removing the battery and disconnecting all power every couple of hours.
Toshiba wouldn't help me and microsoft would not help me.
They both blamed each other. So after paying over $700.00 I was disappointed.
After a year of struggling, I found the drivers for windows XP and installed Windows XP. The laptop was suddenly fast and it worked.
I don't like how hot it gets and the noisy fan on most of the time. A friend has a LENOVO laptop that works very good, and is very quiet.
I doubt that I would ever buy another TOSHIBA again, mostly because they did not support me when the laptop was unusable right out of the box.
Also 3 years is too short a period of time for the 4700.00 Laptop to go in the landfill!
Pathetic.

Satellite laptop black screen on start up!

Last night my laptop froze up and after several minutes of waiting it out nothing was happening. I did a hard shut down and left it overnight. This morning upon turning it on all I get is the Toshiba start up logo and then it goes to a black screen with a blinking white cursor in the upper left hand corner. My only 2 options in the logo screen are F2 and F12. What happened and how can I get it back to normal? I'm starting to panic!

Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop.
Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
If that doesn't fix it, try contacting technical support by calling (800) 457-7777.
- Peter

Satellite P300- Black Screen at start-up

Hey,
My notebook freezed the other day then shutdown. Ever since it has been unable to rebot. The power and battery light are on and when I go to turn it on it comes on and will ether stay on for 5 seconds and go off or stay on but still with a black screen.
Any of you guys plz help.

Hi
In your case I would check the memory modules firstly.
The point is that a faulty module would affect the notebook startup process you would not be able to access the BIOS if the modules are faulty.
You said the notebook shut down this would mean that the temperature has increase to a higher level and therefore the notebook powered off in order to prevent the hardware from damage
In your case everything can be possible as I said; RAM should be checked at first, if RAMs are ok, then other parts like CPU and motherboard should be checked
I think you have not many experience and not enough resources in order to run some tests and therefore I recommend contacting a technician. The professional guy could test the parts and if necessary could replace it

Satellite M70 - Black screen after recovery installation

So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
I do not know what to do now to make my laptop work again. Please help.

Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
Which installations mode you have used: standard mode or expert mode?
Try to install it again.
As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

Satellite T130 -Black screen- HDMI works perfectly

The problem started as a HDMI-cable was plugged into my running Satellite T130-17E and the screen was closed down. From that point the notebook screen stopped working. When booting the windows start-up logo is on for a couple of seconds and just before the entering the desktop the cursor is visible on the screen. But except from these short moments there is no action on the notebooks screen. When I reinstalled the driver to the graphic card there was some short moments (less than 0,5 sec) when the screen was active.
I can use the notebook without any problems via HDMI to my TV. And when I adjust the screens brightness (FN+F6/F7) the black screen can get more back-lighted.
When I turn off the HDMI-output or plugs it out - nothing happens on the notebooks screen.
Can some of you please try to help me out as I really need my notebook to work normal again. If you can help me sort out this problem I'll be very grateful-
Kind Regards,
Jacob Lindberg

When I use FN+F5 to use LCD only - there is a very short moment when i can see the dekstop on the notebook screen, but then it turns black again.
When I try to duplicate the output on HDMI and on the notebook screen - the notebook black is very backlighted when compared to the notebook screen when only the HDMI-output is used. When I switch between the different options on FN+F5 there is som very short moments when some the the notebook screen is active - but it is like a millisecond.
Is there any thing else I can do?
Message was edited by: Lindberg

Satellite A200 - Black Screen Of Death

Hi All,
I have a Satellite A200 model PSAFCA- 01K00J. This model I bought from Harvey Norman in Australia but I can find no listing on the Toshiba web site as either current or discontinued. That sux as I am looking to get any bios updates available to try and rectify a recent black screen issue.
The first time this occured I was able to re-start after removing the battery/disconnect power several times before it came good. The next day after a re-start attempt to install anti-virus updates same problem... disconnected power, removed battery, removed ram (replacing ram one then the other to check for faulty ram cards) and hard drive then bled off residual power with start button. Went through this proccess multiple times before eventually successfull. I have had to go through this a couple of times since after automatic re-starts for windows updates, etc. I have sourced the procedure for manually resetting the bios by jumping it but that is something I want to avoid doing until I have exhausted all other options.
Toshiba Satellite A200
Model- PSAFCA- 01K00J
O/S- Vista
Hard Drive- 160GB with 50GB free space remaining.
System 32 with duo core proccesors.(intel)
Bios Version/Date- phoenix technology's ltd 5.20, 25/10/2007
SMBIOS Version- 2.4
Any idea's on sourcing the latest correct bios or any other input would be gratefully appreciated... :)

Hi Timox, when I turn on at the start button the lap top displays (lights up) the satellite logo and the small display at the bottom front (power on/battery connected and charging displays) and you can hear the extraction fan running as normal but there is just a black screen. I have tried to set up an external monitor... the only time that worked was when I was pressing f8 to go for a system repair/restore but the restore made no difference. Other than that the external monitor shows the same black screen as the lap top.
Given that the bios controls the start up I would have assumed that would be the logical place to look (haven't tried the f2/escape deal yet) so curious as to whats leading you away from the bios ?
I am trying to get to the bottom of this by process of elimination so if you have any other tricks I can try first I would love to hear them... thanks in advance :)
Found a link for an old review of this model... Yet Toshiba doesn't list it for updates (grumble)
http://www.pcworld.idg.com.au/review/toshiba/satellite_a200_psafca-01k009j/218566/
Message was edited by: dustyminer

Satellite L750D - Black screen with sound in media players

Hi,
I have a Toshiba Satellite L750D and running Windows 7. When I play a video file (any format) windows media player opens and starts to play but I only get sound, no picture its a black screen. I tried 2 other media players (VLC and Power DVD) and the same thing happens.
Can anyone help?
I've searched online but nothing has helped so far.
Thanks.

Thanks PauPau for your reply.
I have seen this fix in another online forum, however when i open Options in WMP, there is no Advanced button on the performance tab. I have been unable to locate any options for the Video Accelaration, and no options for 'overlays'.
This problem is not just with WMP, i've tried other players and get the same problem. When WMP is open on the video file, i can see the thumb nails with a picture of the video, but when i open them the picture is black but sound is ok. This is the same for the other media players as well.
Another suggestion i read was to turn off WMP in windows programs, then reboot and then turn WMP back on. This didn't work either. I have also checked the driver and there is no yellow flag on this to say there is a problem.
My last option at this point is to resotre back to factory settings, but i'll use this as a last resort.
Your suggestions are appreciated.

Satellite M70 - Black screen on startup

Hi!
I've a problem with my Satellite M70-309, so for two times after Toshiba logo, Windows Xp (home sp2)doesn't start.
The result is a BLANK & BLACK SCREEN.
So I power off manually then appeared screen black where I can choose if startup normally, last good configuation etc..
What's happened?
Is a hardare problem?Because last mounth my cpu is dead I changed it.
Thank you!
(Sorry for my english I'm italian)

Hi Roks
It is not easy to say what the problem can be but I presume there is something wrong with HDD. It will be interesting what happen with new HDD.
If possible start also recovery procedure to see if the HDD will be recognized properly and if recovery procedure starts properly. Check it using expert mode installation where you have access to HDD info (partitions and so on).

Satellite P505 black screen only on startup

I know there are a lot of black screen posts but I cannot find anything with quite the same problem we are facing. We have a satellite P505-S8980 that only has trouble booting after it has been turned off for the night (or at least a good few hours). No problems with sleep, hibernate etc.
The system boots, we see the Toshiba screen, but where the login screen should be is a black screen with no cursor. An external screen plugged in shows the login screen. After 3 or 4 restarts the screen works as normal.
Have tested the memory and the hard drive extensively and they also work perfectly in another P505. Any advice would be very much appreciated, the machine is great apart from this new problem.
Thanks for your time.

Thanks Peter for your reply, I have been through both of those links before without any luck.
We have done a complete factory restore on this computer, tried the bios reset and all other listed suggestions. There doesn't seem to be any error associated with this, as windows actually starts, then the screen goes black at the user login page.

Satellite L655 - black screen upon powering up

Similar Messages

Maybe you are looking for