Satellite L655 doesn't turn on - Indicators only blink

Everything disconnected from the laptop. Drive of DVD, HDD, CardReader, battery, Wi-Fi. Only the processor and memory (it is tested on other laptop) are connected. I connect the power unit. The indicator of connection of the power unit (the first at the left, color white) turns on.
We press the inclusion button, the laptop doesn't turn on. Only the indicator of connection of the power unit (the first at the left) is switched on and two indicators - the second at the left and the second on the right blink 1 time white color.
It most likely codes of errors. How them to understand?

Hi
The second from left is Power indicator.
Normally this indicator glows white when the computer is turned on. However if you turn the computer off into sleep mode, this indicator flashes amber: one sec on two sec off.
Both while the system is shutting down and while it remains turned off.
The 3rd from left, battery indicator show the condition of the battery charge: white indicates the battery is fully charged, amber indicates the battery is charging and flashing amber indicates low battery condition.
The second from right seems to be an SD card (bridge media slot) indicator and this glows white when the computer is accessing the sd card.
For me it sounds like the motherboard is affected and this means you need an help from technicians

Similar Messages

  • My Zen Neeon 5gb doesn't turn on correctly, only appears CREATIVE on the scr

    I need help because my Zen Neeon 5GB doesn`t turn on the right way. I was listening to music the one day before?and when I tried to turn it on it only appears on the screen: CREATIVE and the menu doesn`t appear on the screen and I can`t listen to music and it doesn`t turn off until I reset it. But you can listen to the hard disk running. I can use it like an USB device but I can`t listen to music. i tried with the upgrade from firmware but appears:
    Device detection failed! Please power off it to generate system file.
    Device upgrade failed!What happen is`t death?

    Have you tried anything in the recovery mode on the player. If not i would go to creative knowledge base and lookup "recoverymode." I would try the clean-up and format first.

  • Satellite L655-S5150 display turns off

    Hello, I have used this laptop over a year and everything worked fine. A month ago, while I was using it , suddenly, the display went black, like in sort of sleep mode ( but the programs keep running). I just have to move the cursor and it turns up again, like nothing happened. But it is not only once, it keeps happpening again and again in the same day (just after a while it goes black again,and I have to move the cursor again).
    Since then, it happens randomly, some days it works fine for hours, others, just after minutes, it starts doing the same thing.
    What can I do?
    Thanks.

    Hi Try going into safe mode (F8) see it you have the same problem. If you made a system repair disc, boot with it and do a repair or restore to a earlier time before your trouble began. Are you using your PC with the battery in or out??Check your power setting. If you need help with these things please ask.
    Dokie!!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture40.JPG ‏98 KB

  • Ipod touch doesn't turn on, screen shows that it must be connected to itunes.

    pod touch doesn't turn on, screen only shows that it must be connected to iTunes. After connecting it and clicking the 'restore', downloaded the software needed to update the device. After all these steps, nothing happened. then the screen suddenly showed the apple logo, then the symbol that shows it must be connected to itunes.. happens again and again.

    Maybe here:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    http://support.apple.com/kb/TS3694

  • Satellite S45-ASP4310SL doesn't turn on, after pressing the power button, a LED blink

    Mi laptop Toshiba Satellite doesn't turn on anymore, THIS MODEL DOESN'T ALLOW ME TO REMOVE THE BATTERY, everytime I lift my finger from the power button the white LED light blinks, I've tried pressing for 30 seconds and a bit more and doesn't works, I've been using this laptop for more than a year, 2 days ago I leave it charging while gaming and go to the bathroom, when I head back, it was turned off and doesn't charge neither.
    Please help me, and excuse me for my bad English

    Hello.
    Do you have any security passwords set for your hard drives?
    There was a user that reported a similar problem with his machine a couple of weeks
    ago, and it turned out to be tied to the HD password he had set. When he turned the
    password off, the machine booted normally.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Satellite A660 (12X) doesn't turn on

    I downloaded a BIOS update, and the moment I run it, the laptop froze. No mouse movement or keyboard response. I left it be for some hours and it still didn't move. I tried to turn it off and it didn't work. Long press the power button didn't work either. In the end I had to remove the battery to turn if off.
    Now it doesn't turn on. Pressing the power button does nothing at all: no screen, lights or fan movement. The only thing still working is the power cable light.
    I was using the factory pre installed Windows 7.

    Bad luck buddy I have no idea why the BIOS update did not run successfully but it looks like the update procedure failed and the ROM module has not been flashed properly.
    Im not quite sure if the new BIOS update using an crisis disk would help you but you should definitely contact the Toshiba authorized service partner in your country for help and assistance.
    Explain him the whole story and possibly crisis disk would be your last way to get if fixed.
    Otherwise the motherboard needs to be replaced :( hopefully this isnt the case

  • How to switch off the LCD on Satellite L655-1JV?

    Hello!
    I have a *Toshiba Satellite L655-1jJV*, and I would like to know how can I *switch the LCD off*. I've tried to use the F5 key, but it doesn't give me the option to change (always the LCD on unless I connect an external monitor .
    Of course, I mean, switch the lcd off while, for example, I got the monitor up, and I'm listening to music...
    I'm really looking for the answer!

    In users manuals document is clearly described when you should use FN+F5 key combination and it has nothing to do with switching LCD off.
    If you dont need display and it should be OFF while you are listening music please change display settings in power options. In power settings there is option Turn off the display. Set it to 1 minute and everything will be OK.

  • Computer freezes/hangs - Satellite L655

    I have a Satellite L655 AMD Phenom(tm)quad core processor II P960. 64-bit. 4 gb ram. 1.80GHz (Windows 7)
    ..about 4 years old now..
    I shouldve made this aware way back when it started because it wouldve made it a hell of a lot easier.
    For about a year or more now everytime i log and get on the internet, play games, use microsoft word, ANYTHING. My connections starts to "Hang" (not responding) and turn up a white screen for about 5 minutes. this happens about 5-10 times an hour, literally. not even joking. about every 5-10 minutes this happens and it annoys me so much. I've ran many computer scans, gotten rid of malware/adware, boosted performance speed, run ccleaner and defraged it. always automatically install windows updates. EVERYTHING. the problem still isnt solved. I use chrome as my current internet browser and i frequently delete the history, cache, and cookies. Even as im typing this my browser started to hang, for a stunning 8 minutes! Im on the brink of throwing my laptop out the window.
    I believe it may be a program i have installed a while back that i dont remember which, i dont know. maybe something like a third party add on from a program thats doing this but i just want it resolved.
    THANKS!

    Tristen,
    Please provide the full model number of your computer.  It is printed on the bottom.
    You can try to restore your computer to an early restore point and see if you can restore your computer to a time before the problem began.  If this doesn't work, the best way would be to run in safe mode and see if you can reproduce the white screen.  If you can't, than it is likely being caused by conflict from some program that you have installed previously.  You could try uninstalling things one at a time, or just restore your computer back to out-of-box state and start all over. 
    I like to do a restore to out-of-box about once a year to keep clutter from building up on my computer.  Of course I save everything first (personal files, bookmarks, etc.) so I don't have to do that all over again.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Re: Satellite L655-11J flash card F8 missing Win 8.1

    First I searched the internet I read so many threads about this but none is regarding my problem.
    My wireless card is +Broadcom 8.11n+ with ID PCI\VEN_14E4&DEV_4727
    Is not supported by new TVAP flash cards which I had to install in Windows 8.1
    I noticed that in Windows 7 when I tried to install a new version of TVAP the F8 is missing,
    So I was stuck in an old version.
    I tied to add my wireless ID to the registry
    HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessAPL\BT WLANDP
    as it is not listed with no luck
    The only way I think is to contact TVAP developers and ask them to re-support my wireless again in a new release if they will make one, as I needed it badly it to turn off Bluetooth wireless as well.
    Although I can turn the WIFI off but the light of will stay on.
    I there is any other way anyone can tell I am willing to try
    Thanks in advance

    >Is not supported by new TVAP flash cards which I had to install in Windows 8.1
    As far as I know the Satellite L655-11 isnt Win 8 supported notebook model and also Win 8.1 is not supported too.
    Its not listed on this WINDOWS 8.1 UPDATE - SUPPORTED MODELS page
    http://www.toshiba.eu/innovation/jsp/checkWindows8_1Compatible.do?service=EU
    This means that there are no Win 8 / Win 8.1 drivers for the L655 series.
    _Secondly_
    The VAP (Value added package) isnt released for Win 8 or Win 8.1
    The VAP was replaced with Toshiba System Driver
    Additionally to get FN key working, the Toshiba Function Key Utility for Win 8.1 needs to be installed.
    These both tools are needed to get the FN keys (also the F8) working properly under Win 8 or Win 8.1

  • Satellite L655-S5150 Poor connection to wireless on Battery after BIOS update.

    Hi Folks, New to the Forum. Sorry if this was previously covered; however need help.
    Brand new Satellite L655-S5150. Updated BIOS and Eco via Toshiba Bulletin board a few days ago and have experienced wireless connection cutting in and out. Noticed it only happens while on battery power. Tried changing driver power options with no luck(I did not restart after making this change) and then changed back to default. Is there a fix for this? Should I roll back BIOS? Should I return for another PC?
    Any help is appreciated.
    Alex
    Solved!
    Go to Solution.

    I am not sure what is going on? I have the same laptop. I have flashed my BIOS twice. I am not sure what to say. I have never had any kind of problems with anything. I bought a Cissco ethernet router that handles all bands. I hooked the router up to comcast turned the laptop on and all was done. Get this, then I bought a LexMark 3 all in one printer. Set it up turned it on and started printing with no cables used, wireless. Deal is I have been working with computers for 20 years. The other deal, if I am not infront of the computer that is having problems it is hard for me to tell what is going on. I just don't get it. You should be able to plug it in and go for it. If you have questions I will do my best to answer them. Maybe if I can talk one through it it can be passed on.

  • My ipad 2 doesn't turn on, My ipad 2 doesn't turn on

    I used my ipad two days ago using mail and playng games only for a little time. I turn off ipad. Yesterday morning I tried to turn on my ipad but it seems dead. I try to charge after try all way to turn on it. I left it charging all the night but this morning it doesn't turn on still. Sorry for my english; hope have explained my problem.
    Thanks

    See if this will restart it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Macbook Pro Screen doesn't turn on?

    So, I have a late 2011 Macbook Pro 15". About two weeks ago, my macbook screen just stopped working. I shut it down, and since then it's been practically "dead". The display doesn't turn on, the logo on the back is off; Essentially, the whole display of the mac doesn't get powered on.  However, the startup noise is still there when I turn it on. I've been using it in a monitor as of now and it works fine with the monitor. This is the thing though, the screen is perfectly fine!! About a week ago in the morning when I turned it on, the display turned on. the screen had been white, and the apple logo popped up, it looked completely fine. Sadly I had to go to school and when I came back, no matter how many times I restarted it or did anything to it, the screen would just not turn on. Yesterday, I was showing my friend and restarted it, turned it on, then nothing. Tried it again while doing random keyboard strokes and the display turns on. Excitement in my eyes, it actually restarts and for the first time in two weeks I was to see my desktop and see my mouse moving around, all the icons, everything! The display and everything on it was working perfectly normal, no noise, no distortion, no odd colour, no issues on the display at all. My friend boots it to windows and the display stops working and again since then it hasn't worked. It's alive and perfectly normal in there, but I just don't know how to give it what it needs to bring it back that way.
    Does anyone know anything to help me on this? It's quite frustrating when you see it work, then shut off. I can't use it at school to do my work anymore and it's such a nuisance.

    You have a hardware problem. More than likely it is the cable that goes from the logic board to the display. It sounds like an internmitent short. Works sometimes not at other times.
    The only way to fix a hardware problem is to replace the faulty piece of hardware and the only people that do that is either an Apple store or an Apple authorized repair center. That is unless you can diagnose the actual failed hardware part, find one from an Aftermarket Mac parts seller and replace the part yourself.

  • The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on...  What is wrong?  Can photos and data be retrieved?

    The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on...  What is wrong?  Can photos and data be retrieved?

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem  due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
    Apple Retail Store - Genius Bar                          

  • MacBook Pro suddenly doesn't turn on.

    My MBP suddenly stopped working.
    It was sleeping and when I decided to use it, it doesn't turn on at all.
    The charger's LED indicator doesn't work either, or any of the lights in the computer.
    I don't know if a SMC reset can help fix it? Help..?

    gabyy1026 wrote:
    I don't know if a SMC reset can help fix it? Help..?
    The only way you will know if you do it!  If it doesn't work, then  post back.

  • Macbook Pro 2009 doesn't turn on without battery

    Hi. I have a mbp mid 15" mid 2009 2.66. In time the battery bacame very low like 4% health, and now is completely dead or broken. When i check the battery status leds it shows full and when I try to turn on the computer (of course with AC power) it tries to turn on for 1 sec then it dies, even with AC plug. i hear the fans trying to spin for 1 sec or less, i hear the hdd sound and i see the standby led like it is trying to power on normally but It seems like it's trying to use the battery to power on. (Even when the battery was good, it would't turn on if it was 0%.. i would have to wait 10-20min or whatever to charge it to aprox20% or whatever).
    I can't buy a new battery right now so I tried to turn it on without battery (I am sure the battery is completely dead and if I put a new battery it will work for sure) but why it doesn't turn on without battery?? I don't believe it needs battery to run on AC power. It's a SMC thing. What can i do to use the SMC and run the computer wihout battery? Now I'm using it with SMC bypass (keep pushing power for 10 sec and plug the ac chord) but with SMC bybass the fans run at max speed, no keyboard backlight no sensors and all that uses smc its not working. Is it safe to use it that way? (it's not running slower, i don't have performance issues).
    I tried PRAM reset SMC reset, removing battery with AC on.. nothing works. It won't turn on without battery. Only with smc bybass.
    It is something i can do? or buying a new battery is the only solution?
    Thanks.

    You have a hardware problem. More than likely it is the cable that goes from the logic board to the display. It sounds like an internmitent short. Works sometimes not at other times.
    The only way to fix a hardware problem is to replace the faulty piece of hardware and the only people that do that is either an Apple store or an Apple authorized repair center. That is unless you can diagnose the actual failed hardware part, find one from an Aftermarket Mac parts seller and replace the part yourself.

Maybe you are looking for

  • Outlook Anywhere, Office 2013 + Exchange 2013 freezes

    Hi. I'm pulling my hair out with this problem as it seems to make no sense. I have a client using outlook 2013 through outlook anywhere to their new server running Exchange 2013. when outlook is opened it seems to work for about 10 mins or so then af

  • Performance improvement in XI

    Hi, I have designed a scenario in which I am using my own queue for the message storage not the one that XI defines on its own. there is a BPM which uses a block a switch and a few transformation steps. at one end I am using HTTP adpt as sender adpt

  • 'completed' bar image on a report

    hi, I have got a report based on an sql query and I need an image within the report to display the completed percentage. This image will consist of a bar and a number 0-100 the length of bar will corespond to the number. any ideas? Thanks Tom

  • IPhone device not listed in iTunes windows

    I am trying to transfer songs from windows itunes to my new iphone 5s but the itunes has no button on the right top which says devices. Both the itunes and iphone 5s is convered with the same apple id. But still the device button is not shown. Please

  • Editing in Adobe PDF Pack?

    Hello, I'm thinking about buying an annual license for the Adobe PDF Pack but I have a question about editing. Based on the research I've done on the Acrobat.com website it seems that editing an existing PDF file (such as deleting a page) is not poss