Satellite L655-S5107 - No battery detected after Win 8.1 installation

I install windows 8.1 on my Toshiba Satellite L655-S5107, battery with an x ??appears in the description says "no battery is detected".
Why is this happening? Do I need a driver or software?

Hi
Possible solution:
Go to device manager, right click and uninstall "microsoft compliant ac adapter"
Then go to action and scan for new hardware.
Now the battery should be found.
Sometimes an additional reboot would be neccessary.

Similar Messages

  • Re: Satellite L655-11J flash card F8 missing Win 8.1

    First I searched the internet I read so many threads about this but none is regarding my problem.
    My wireless card is +Broadcom 8.11n+ with ID PCI\VEN_14E4&DEV_4727
    Is not supported by new TVAP flash cards which I had to install in Windows 8.1
    I noticed that in Windows 7 when I tried to install a new version of TVAP the F8 is missing,
    So I was stuck in an old version.
    I tied to add my wireless ID to the registry
    HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessAPL\BT WLANDP
    as it is not listed with no luck
    The only way I think is to contact TVAP developers and ask them to re-support my wireless again in a new release if they will make one, as I needed it badly it to turn off Bluetooth wireless as well.
    Although I can turn the WIFI off but the light of will stay on.
    I there is any other way anyone can tell I am willing to try
    Thanks in advance

    >Is not supported by new TVAP flash cards which I had to install in Windows 8.1
    As far as I know the Satellite L655-11 isnt Win 8 supported notebook model and also Win 8.1 is not supported too.
    Its not listed on this WINDOWS 8.1 UPDATE - SUPPORTED MODELS page
    http://www.toshiba.eu/innovation/jsp/checkWindows8_1Compatible.do?service=EU
    This means that there are no Win 8 / Win 8.1 drivers for the L655 series.
    _Secondly_
    The VAP (Value added package) isnt released for Win 8 or Win 8.1
    The VAP was replaced with Toshiba System Driver
    Additionally to get FN key working, the Toshiba Function Key Utility for Win 8.1 needs to be installed.
    These both tools are needed to get the FN keys (also the F8) working properly under Win 8 or Win 8.1

  • Toshiba satellite l850-1lk ''no battery detected''

    My laptop has been working fine but today when I went to go on it, the screen wouldn't come on, then when it eventually did come on it said ''no battery detected'', now my battery has been poor for some time now but what could this be?
    If i try to unplug it from the AC it just turns off straight away, the only way to keep it on is to keep it plugged into the AC, yet it still says no battery detected?
    I've looked on loads of forums and they said to update the BIOS, my bios is at 6.00 yet when I tried to update it, it wouldn't let me do it because it said ''please insert battery'' I've ordered a new battery but i'd really like to know what the problem is and how I can solve it, i'm not that tech savvy so
    Also, my PC health monitor also was working fine but now it won't open, service station, diagnostic tool etc all open fine, what has caused this?
    all help will be greatly appreciated!

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    If it's a European model, you could check the Toshiba Europe forums.
    - Peter

  • Suspicious files detected after clean windows 10 installation

    Hi
    I scanned my computer after clean windows 10 installation and found three suspicious files and i'm confuse should i remove it or not. The files details are below.
    Emsisoft Emergency Kit - Version 9.0
    Last update: 25/03/2015 07:40:59
    User account: Addison
    Scan settings:
    Scan type: Custom Scan
    Objects: Rootkits, Memory, Traces, C:\
    Detect PUPs: On
    Scan archives: On
    ADS Scan: On
    File extension filter: Off
    Advanced caching: On
    Direct disk access: Off
    Scan start:    25/03/2015 07:43:00
    C:\Program Files\WindowsApps\Microsoft.Cortana_1.4.2.152_x86__8wekyb3d8bbwe\dndactionurihandlers.dll     detected: Gen:Variant.Renos.38 (B)
    C:\Windows\System32\omadmclient.exe     detected: Gen:Variant.Graftor.6200 (B)
    C:\Windows\WinSxS\x86_microsoft-windows-d..agement-omadmclient_31bf3856ad364e35_10.0.10041.0_none_7aacbb6a819e253e\omadmclient.exe     detected: Gen:Variant.Graftor.6200 (B)
    Scanned    138054
    Found    3
    Scan end:    25/03/2015 08:03:27
    Scan time:    0:20:27

    Addison
    You can confirm whether or not these are malware by running a second malware app (Malwarebytes)  I suspect they are not and are just false positives
    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.
    http://www.malwarebytes.org/products
    Wanikiya and Dyami--Team Zigzag

  • Satellite C850-F0152 - Wireless is gone after Win 7 installation

    Hello
    I have a C850-F0152, i got it with Win 8 so i reformatted with win 7 x64, however my wireless is gone..
    What i mean is, i had wireless with win8, i could connect to networks and stuff, but with the reformat its just gone, there is no wireless adaptor being picked up in my device manager, and i cant see anything in the Network and sharing center.
    All my drivers are installled..i think, i let windows download most of them, and the only ones i cant find online and that windows also cant find is. Network Controller, USB Controller, then it lists 1 unknown device.
    Help someone Please, i got no clue whats going on.
    Regards
    Brigadier

    > All my drivers are installed...i think,
    Well, I think you did not install a compatible WLan driver
    The notebook seems to support Realtek Wlan / BT combo card.
    This means that one module shares the Wlan and BT function.
    In this case you should install Realtek Wlan driver, Realtek BT filter package and finally the Toshiba BT stack.
    PS. Satellite C850-F0152 belongs to the PSCBWF series. All drivers should be available on Toshiba EU driver page

  • Satellite Pro C850 - WLAN keeps failing after Win 7 installation

    Hi,
    I own a C850-1GR (PSCBXE), which comes with Win8.
    I've bought Win 7 32-bit Home Premium and reinstalled it from scratch.
    Afterwards I've installed the drivers from toshiba support page in the following order:
    Intel Chipset SW Installation Utility
    Intel Management Engine Interface
    Display Driver
    Intel Rapid Storage Technology Driver
    Realtek Audio Driver
    ATI HDMI Audio Driver
    SRS Premium Sound HD
    Synaptics Touch Pad Driver
    Realtek LAN Driver
    Realtek Wireless LAN Driver
    Intel Wireless Display
    Realtek Bluetooth Filter Driver Package
    Bluetooth Monitor
    Intel USB3.0 Driver
    Realtek Card Reader
    TOSHIBA Value Added Package
    TOSHIBA Sleep Utility
    TOSHIBA Resolution+ Plug-in for Windows Media Player
    TOSHIBA Media Controller
    TOSHIBA Media Controller Plug-in
    TOSHIBA Network Device ID Registry Setting Tool
    TOSHIBA Web Camera Application
    PatchFiles PCIIDEREG-1.2
    PatchFiles
    When the installation is done, WLAN fails after reboot, alternately.
    This means:
    *First boot: WLAN OK*
    *Second boot: WLAN fails*
    *Third boot ( = first boot): WLAN OK*
    *Fourth boot ( = second boot): WLAN Fails*
    *and so on.*
    Failing means, the WLAN symbol is displayed for a few seconds, then the "no network" icon is displayed.
    Any help is greatly appreciated.

    >(Why on earth should a device report an error every second system boot?)
    Yes, indeed this is very confusing and strange.
    Just one notice regarding:
    >Please note, that the intel driver is for "wireless display".
    Intel wireless display works only in connection with Intel WLan card. If your notebook does not contain Wlan card from Intel manufacturers, the wireless display does not work
    >Furthermore, all these drivers are listed on the C850 driver page for Win7-32.
    Yes, this is true but all these drivers appear because of different C850 with different hardware configuration.

  • Satellite A200-1AX: very grainy videos after Win 7 installation

    Hello.
    I have a toshiba Satellite A200-1ax and it use to have Vista when i got it.
    I got rid of the OS and installed XP, thous installing the BIOS update for XP.
    I've recently installed Win7 and everything is good. The only problem i have is with video files.
    Every thing i watch is very grainy.
    I've installed some codecs and the catalyst for Win7 beta and thing's got a bit better. Still pixelized though.
    But HD video files don't work at all. It's the same as having a video card that doesn't support HD.
    The audio races ahead of the video.
    I haven't changed anything with the BIOS.
    Could the problem be from there? Should i run the BIOS update for vista?

    I use ti have Xp on the laptop and the same videos where great. Now they are grainy.
    HD doesn;t work properly.
    That's the only problem with this OS...
    Use to have vista, but i don;t want to go back to those memories :D
    PS - i gave the copy of win7 to a friend, he installed it and the videos are OK with him.

  • Satellite L655 S5107 Audio stutters and it also crashes

    I'm having similar problems like a lot of people I think, where my laptop has audio stutters, but mines also freezes and then crashes. This happens when I'm listening to music or watching videos. I've tried updating drivers and disabling them and enabling again, but the problem still persists. I don't know what else to do, if anyone knows I would really appreciate the help, thank you. 

    You might want to share that information on the appropriate forum.
       http://forums.malwarebytes.org
    -Jerry

  • Re: Satellite A200 Touchpad scroll dosnt work after Win 7 installation

    When I change my windows from xp to w 7 my scroll dosen t work.
    What should I do?
    Sorry for my english....

    Hello
    The BIOS downloads you can find on the same place as drivers:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Before you start the update, close all running programs and make sure that you are logged in as administrator.
    Greets

  • Satellite L635-PSK04E - I lost Nero after WIn 8 Upgrade

    I'll this model ever be contemplated in toshiba upgrade assistant?
    I'm asking because i've already upgraded to Windows 8 but i lost NERO which came with Windows 7.
    It is possible to get it from any where else with the same conditions?
    Thanks,
    LP

    Yes, that was the problem! I made a clean install of Windows 8...and Nero...puf...:D
    I don't like upgrades, normaly they give problems. I prefer clean installations, but this is the price to pay...I tried to find it from the swm Toshiba images but no luck...
    Thanks..

  • Satellite L50-A01Q - WLAN not detected after install Atheros WLAN Driver

    I have a L50-A01Q. I've recently replace the harddisk to a SSD. I've installed Win8.1 via a DVD downloaded from Microsoft. I've also installed the Atheros Wireless LAN Driver download from Toshiba. However, the system does not recognise the WLAN. Anyone has reinstall windows 8.1? how did you get the driver?

    I have checked AU download page for your notebook model and there are offered two WLAN drivers: Atheros and Realtek.
    If Atheros driver is not recognized it is possible that Realtek WLAN card is used in your notebook model. Try to install this WLAN driver.

  • Hal.dll error during/after Win XP SP2 installation

    At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
    HDD1: OSX
    HDD2: free
    HDD3: OSX Data (raid 1)
    HDD4: OSX Data (raid 1)
    The setup I'd like to have is:
    HDD2:
    (1) Bootcamp-Partition (NTFS ~75GB)
    (2) Bootcamp-Scratch (NTFS ~150GB)
    (3) Scratch (HFS+ ~250GB)
    I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
    After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
    After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
    (1) Scratch (HFS+ ~250GB)
    (2) Bootcamp-Partition (NTFS ~75GB)
    (3) Bootcamp-Scratch (NTFS ~150GB)
    Same error.
    Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
    BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

    First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
    The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
    http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
    Hope that helps you........

  • Qosmio X70-A-12N - no sound over HDMI after Win 8.1 installation

    Hallo,
    I installed on my Qosmio Windows 8.1 and all driver.
    Now I have a Problem with HDMI Sound.
    When I connect with TV, I see the Picture on TV but don't get sound.
    I go to Control Panel: Sounds and Multimedi and I see the internal devices (loudspeaker from Laptop and Headset).
    I activated to see disconnected devices and no other devices will be displayed.
    I assume, it fail a driver.
    I installed Sound driver, DTS Studio Sound, Toshiba Audio Enhancement and SRS Premium Sound HD Plug-In.
    I don't installed the regestry patch -> For what I need it?
    Have you an idea to solve my problem?
    THX
    Richard
    (Sorry for my bad english)

    Hi
    >I installed on my Qosmio Windows 8.1 and all driver.
    As far as I know the Qosmio X70-A-12N were preinstalled with Windows 8.1 64bit system and this OS was configured by Toshiba.
    Did you install new Windows 8.1 or did you use the Toshiba system?
    Did you create recovery medium (recovery disk or USB flash memory stick)?
    In case you create such recovery disk, I would recommend you to use it in order to set the system back to factory settings. This should fix your HDMI sound issue.
    How about other Toshiba software installation like for example Toshiba system driver, display driver etc? Did you install all the Win 8.1 drivers and tools which were released for this unit?
    Missing software could be main reason for your HDMI issue

  • Satellite Pro C650 - missing Hotkey Utility after Win7 64-bit installation

    I've just installed Win7 64 bit on a C650 laptop but I don't see the Hotkey utilities for wireless on/off or touchpad (Fn F8 &F9) on the Toshiba list of drivers.
    Do these utlilies exist? Where would I get them from?
    Ritchie.

    You must install Toshiba value added package. This package contains several tools and utilities.
    Please download and install latest version from Toshiba support page - http://eu.computers.toshiba-europe.com
    If you need more help you are welcome.

  • Satellite L655-S5150 Poor connection to wireless on Battery after BIOS update.

    Hi Folks, New to the Forum. Sorry if this was previously covered; however need help.
    Brand new Satellite L655-S5150. Updated BIOS and Eco via Toshiba Bulletin board a few days ago and have experienced wireless connection cutting in and out. Noticed it only happens while on battery power. Tried changing driver power options with no luck(I did not restart after making this change) and then changed back to default. Is there a fix for this? Should I roll back BIOS? Should I return for another PC?
    Any help is appreciated.
    Alex
    Solved!
    Go to Solution.

    I am not sure what is going on? I have the same laptop. I have flashed my BIOS twice. I am not sure what to say. I have never had any kind of problems with anything. I bought a Cissco ethernet router that handles all bands. I hooked the router up to comcast turned the laptop on and all was done. Get this, then I bought a LexMark 3 all in one printer. Set it up turned it on and started printing with no cables used, wireless. Deal is I have been working with computers for 20 years. The other deal, if I am not infront of the computer that is having problems it is hard for me to tell what is going on. I just don't get it. You should be able to plug it in and go for it. If you have questions I will do my best to answer them. Maybe if I can talk one through it it can be passed on.

Maybe you are looking for

  • HT5664 how do you copy the iPhoto library to the hard drive

    I copied some photos onto a DVD and my new iMac won't let me download them into iPhoto.  I don't understand the instructions to download the iPhoto library into the hard drive.  How do I do that?  What do I do once that part is downloaded?

  • HT1349 Why can't I open my apps I bought

    Just bought an I phone and used iCloud now I can't use my apps I have already bought.  The app is here but when I tap on it nothing happens

  • OS X get "frozen" often while I run in internet ...

    Hi people, I remark that in that often my mac get "frozen" suddenly and I have to restart holding down the power key for few seconds..that's happend also 5-6 time pro day..sometimes less. After restarting, it says that OS X shut down and ask me to se

  • What would make my iTouch have issues with connecting to wifi?

    It has been working fine all over the house, but now I am confined to 5 feet near the router.  This problem happens in multiple areas, where a laptop can connect fine.  I've done both hard and soft resets.  I have not restored the iPod back to factor

  • Need a model Scenario

    HI Pals, I was going thru the form and i got many scenarios like IDoc to File, ABAP Proxy to File, File to JDBC, File to ABAP Proxy.. Could you get me one model scenario with screenshots for the Scenario explained below. <b>The Scenario is that the i