Satellite L755-128 (PSK30E): Can I use BIOS for L755 PSK2YE?

Bios upgrade for L755-128 (PSK30E) was never released. Current BIOS is 1.90.
Is it safe to upgrade to 2.70 from L755-12D (PSK2YE)? Very same laptop except added blue-ray drive.

Do I have BIOS problems?
No.
Do I expect BIOS newer than "preproduction beta"?
Yes.
Talking from experience with several Toshiba models, it seems that Toshiba is a bit less "BIOS&drivers" supportive with cheaper (no OS) models.
Thanks for reply

Similar Messages

  • Satellite A50 - Where I can find new BIOS?

    Where I can find new bios for my laptop Toshiba Satellite A50?

    Hi!
    Look on the Toshiba website. There you can find new BIOS versions and all drivers too.
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

    Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
    MSI P-35 Platinum
    Q6600 Core 2 Quad
    Presently XP 32Bit
    NVidia geforce 8600GT
    8GB DDR2 SDRAM PC6400-800MHz
    Windows 7..waiting to be installed.
    Hello,
    I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
    When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista.   Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers?  When do i install these drivers....before the OS install, or after?
    Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?  
    Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
    Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.?  People tell me that there is a chance of the OS installing sometimes on the other drives.
    Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
    Thx

      I've never had this much trouble hooking up a HDD.
           I have two IDE DVD/CD ROMS.  (My RAID MODE was IDE in XP OS, and still is with WIN7.)
           I have three SATA HDD's.
    After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
      So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
    I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor.  Seems no matter what I change in the boot sequence,it never wants to boot properly
    ....AND THEN,
     I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy.  Win. Explorer also listed them in that folder, in device manager, it listed all three too.
     The managed window showed this:
    74GB    (system,active,Primary partition)                       Storage
    2TB     (Primary partition)                                           Excessive Storage
    500GB  (Boot, page files,crash-Dump, Primary partition)   Operating system
    Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
    Before I just got online, I tried RESTART, and it opened Windows the usual way,  so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
    I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS.  Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE.  My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.            
    So what is the preferred boot sequence?   

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

  • How can I use OCCI for oracle8.1.6?

    my database is oralce8.1.6 for solaris8.
    I want to develop database application by OCCI .
    But only oracle9i has OCCI.
    How can I do?
    Where can I get OCCI ,and how can I use it for oralce8.1.6?
    thank you very much!!

    OCI is available for all versions of Oracle including Oracle
    7/8/8i etc. However it is not installed by default with these
    versions. I am assuming that the default 9i installation
    includes OCI. You should be able to install OCI for other
    versions through one of the development platforms e.g. ProC/C++
    etc.

  • How can i use AME for the new OAF page.

    Dear all,
    I have developed a new OAF page and registered under Employee Self Service.
    How can i use AME for the approval process.
    Appreciate your ideas?
    zamora

    I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
    Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
    Let's look at the workflow and putting an OAF Page as notification.
    As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
    In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
    If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
    Hope this gives some idea.

  • How can i use RTFEditorKit for JTextField.

    hi all,
    how can i use RTFEditorKit for JTextField.
    thanks in advance
    daya

    Don't cross post. This is a Swing related question and you have already posted in the Swing forum:
    http://forum.java.sun.com/thread.jspa?threadID=619619&tstart=0

  • How can I use Siri for IPhone?

    How can I use Siri for IPhone?

    Siri only works on the iPhone 4S or iPhone 5. If you have one of those devices, turn it on in Settings > General > Siri.
    If you need more info than that, ask in the Apple forums.

  • How can I use music for ringtones on my iphone 4?

    How can I use music for ringtones on my iphone 4?

    You can take any MP3 file that it 40 seconds or less and change the file extension to M4R. Then drag it into iTunes. It will appear under Ringtones and transfer over next time you sync,

  • I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
    If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

  • Can I use iCloud for backup?

    Can I use iCloud for backup?

    To back up all your data you are better off getting an external hard drive.  For details on iCould, read: http://www.apple.com/icloud/.

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • Can i use iCloud for pages documents iMac?

    can i use iCloud for pages documents iMac?

    Hi lmdavis72,
    It looks like you can.
    From "iCloud: Documents in the Cloud overview"
    You can download a document from icloud.com/iwork to your Mac or Windows computer, edit it, and then drag the revised version to icloud.com/iwork. It’s then automatically updated on all of your iOS devices. You can also drag an iWork ’09 (Keynote, Pages, and Numbers) or Microsoft Office (PowerPoint, Word, and Excel) document created on your computer to icloud.com/iwork.
    So it looks like it can go between iOS devices and your iMac.
    ivan

  • Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    No. Phones sold by GSM carriers can't access CDMA at all and phones sold by CDMA carriers can only access GSM if they are a) unlocked and b) in an area where there is not CDMA.
    Best of luck.

  • DBCA can not use ASM for database storage due to following reason: Could no

    Hi
    I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
    I installed Grid Infrastructure with grid user:
    Node1: # id grid
    uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
    Node2: # id grid
    uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
    I installed the Oracle Server with oracle user:
    Node1: # id oracle
    uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
    Node2: # id oracle
    uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
    All related Grid Infrastructure is functioning well in both nodes:
    $ crs_stat -t
    Name Type Target State Host
    ora.DATA.dg ora....up.type ONLINE ONLINE node03
    ora.FRA.dg ora....up.type ONLINE ONLINE node03
    ora....ER.lsnr ora....er.type ONLINE ONLINE node03
    ora....N1.lsnr ora....er.type ONLINE ONLINE node04
    ora.asm ora.asm.type ONLINE ONLINE node03
    ora.cvu ora.cvu.type ONLINE ONLINE node04
    ora.gsd ora.gsd.type OFFLINE OFFLINE
    ora....network ora....rk.type ONLINE ONLINE node03
    ora.oc4j ora.oc4j.type OFFLINE OFFLINE
    ora.ons ora.ons.type ONLINE ONLINE node03
    ora.scan1.vip ora....ip.type ONLINE ONLINE node04
    ora....SM1.asm application ONLINE ONLINE node03
    ora....03.lsnr application ONLINE ONLINE node03
    ora....d03.gsd application OFFLINE OFFLINE
    ora....d03.ons application ONLINE ONLINE node03
    ora....d03.vip ora....t1.type ONLINE ONLINE node03
    ora....SM2.asm application ONLINE ONLINE node04
    ora....04.lsnr application ONLINE ONLINE node04
    ora....d04.gsd application OFFLINE OFFLINE
    ora....d04.ons application ONLINE ONLINE node04
    ora....d04.vip ora....t1.type ONLINE ONLINE node04
    $
    The ASM instance are running well in both nodes
    Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
    $
    $ lsnrctl status
    LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
    Copyright (c) 1991, 2011, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
    Start Date 16-MAY-2012 15:24:19
    Uptime 0 days 0 hr. 16 min. 47 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
    Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+ASM1", status READY, has 1 handler(s) for this service...
    The command completed successfully
    $
    $
    DATA & FRA disk group are created:
    $
    $ echo $ORACLE_SID
    +ASM1
    $
    $ asmcmd
    ASMCMD>
    ASMCMD> ls -lt
    State Type Rebal Name
    MOUNTED EXTERN N DATA/
    MOUNTED EXTERN N FRA/
    ASMCMD>
    ASMCMD>
    The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
    What can be passing in this case... ?
    Thanks in advance

    Thanks both
    Really the problem initially was because of this:
    [INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
    and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
    I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
    /home/grid/.ssh -------> /home/grid/.ssh
    authorized_keys
    known_hosts
    This is the procedure if you run the wizard at the node1.
    The problem is that the wizard creates the keys incompletely...
    Thanks

Maybe you are looking for