Satellite L755D-S2579 AMD Drivers Not Working on Fresh Windows 7 Install

Hi,
The HDD died in my L755D-S2579 yesterday. I was able to install Windows 7 on a new HDD but cannot get the AMD drivers to work correctly. I've downloaded the latest drivers from the support page and it seems to go through the install but the Display menu continues to use the Generic Standard VGA Graphics Adapter instead of the AMD drivers. When I try to open AMD Vision Engine Control Center it says that there are no settings that can be changed at this time. I've tried uninstalling the generic drivers and uninstalling and reinstalling the AMD drivers but nothing is working. What can I do to get this to work? I can't continue using this laptop if it's running at 1024x768.

Satellite L755D-S2579
What is the part number of your computer? It looks something like PSK32U-03P00X.
-Jerry

Similar Messages

Some drivers not working in fresh XP SP1 install

My latest machine is set up for dual boot. The general use OS is XP SP2. The nForce drivers were installed from unified package 5.10. All hardware is working fine, and no problems.
The OS for digital recording however, is a different story. I'm using XP SP1 installed in a different partition. SP1 is usually recommended over SP2 for music multitracking purposes. I installed the exact same nForce drivers from the same 5.10 package. Device Manager is reporting two problems. The multimedia audio device drivers are not installed, and the Realtek Ethernet drivers are not installed. The nVidia Ethernet device works with no problem. I did not uncheck any options during the driver install.
So basically, I have no sound, and am only showing one Ethernet device. I've tried re-installing the drivers, but get the same result. Also tried updating the audio drivers through Device Manager, pointing the wizard directly at a folder full of the 4.57 nForce audio drivers which I've downloaded as well. The wizard doesn't even see them.
Funny how my recording OS is the one with no sound... hehe. Although I doubt it, are there any known issues with unified package 5.10 and XP SP1? Anyone have an idea of what might be happening?
Let me know if further info is needed.

Bimmerboy,
I do not know of any issue between SP2 and 5.10. It could just be a bad install of WinXP. I would do a fresh install on that partition again. It should solve the problem.
Take Care,
Richard

Touchscreen not working on fresh Windows 8.1 install

I just bought a Pavilion 11-n040nb x360 and I'm planning to buy a few more for work, but I have a problem I wasn't able to fix so far.
On the OEM Operating System the touchscreen was working without a problem. I then installed an SSD-drive and created a new partition with a clean Windows 8.1 install. From the first startup the touchscreen isn't recognized by Windows.
The touchscreen itself is still working in BIOS/UEFI-setup and the diagnostic tool proves there's nothing wrong with the hardware itself.
I found a lot of posts from people with the same problem and tried really every tip, a lot of different drivers and software, but still can't get it to work.
More usefull info:
- HD Graphics 10.18.10.3366 driver installed and in use
- Synaptics 18.0.4.81 driver installed and in use
- Windows is up to date (no recommended or optional updates available)
- Windows system screen shows the message 'pen or touch input is not available for this display'
- No unknown devices in Windows device management (all drivers installed)
- Looks a bit weird to me: in device management, next to the Synaptics PS/2 Port Clickpad, there is another device called "HID-mouse" with hardware ID HID\VID_0461&PID_4DF1&REV_0300&Col01 but I can't find any other drivers for it than the default Windows-driver, I'm thinking this might be the touchscreen hardware?
Any help on how I can get the touchscreen working on this clean Win 8.1 Pro install?!

@Dennichio ,
Hello and thank you for posting on the HP support forum. What may have happened with your install is that the chipset driver may not have been loaded first causing issues with the touchscreen driver.
Here is the link for your systems supported drivers.
HP Pavilion 11-n040nb x360 PC (ENERGY STAR) Drivers.
Once you have downloaded all your software and drivers for your notebook you will want to boot into safe mode and uninstall your drivers.
Windows 8 Safe Mode
You may have to reboot between each uninstall.
once this is done then you will have to boot back into windows normally.
Now install your drivers again this time make sure you install the chipset drivers before anything ellse.
Please let me know how this goes for you.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

How do I get past the drivers not found problem during Windows 7 install?

I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive. I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso. I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows. The system reboots and starts to install Windows 7. Then it pops up an error:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple. So, I copied the Windows Support Software to a USB drive.
Once I get to this point, I can browse to the USB drive and I get the following file tree:
Drivers
     Apple
          x64
     Asix
     Atheros
     ATI
     Broadcom
     Cirrus
     IDT SigmaTel
     Intel
          Chipset
               All
               ia64
               Lang
                    Chip
                         (various languages)
               WIN7
               x64
     Marvel
     NVidia
          NVidiaChipset32
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          NVidiaChipset64
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          Win7_32
          Win7_64
     RealTek
The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7. When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found. I can't get past this point. The Windows 7 installer will not continue. If I select any of the other directories, I get the message "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
Any thoughts? Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league. However, this is a Windows installation issue and I'm getting hung up on device drivers. Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
...Mel
Sr. Systems Administrator - Windows, SharePoint

valid Windows 7 DVD burned from an .iso.
Usually burned ISO to DVD only works when burn speed is set to slowest.
Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
Product support page is best place to start with every device and product.
www.apple.com/support/bootcamp
has manual pdf, faq, how to, support articles

Wifi not working with bootcamp windows 7 install

I have installed window 7 enterprise via bootcamp however I can't get my wifi configured. Windows does not see the built in wifi. So I cant get to the outside world nor configure a wifi printer in window. Everything still works perfectly in OS 10.6.6. Any advise on how get to get the wifi working in windows would be great.

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Hi,my iphone is not recognized and it says- AMDS its not working

hi, i have a problem, my iphone is not recognized and it says that AMDS its not working so i restarted and it is set to automatic startup....but it still isnt working! so my question is can i reinstall my itunes? wont it affect the tings i have in it (i mean my pic and stuff)? im asking cos i remember that itunes always deleted my stuff on my ipod? and i gues i have forgoten my backup pass.....thank u very much for help

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

U330 Windows 7 Drivers Not Working

Hello,
I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
thanks!
Solved!
Go to Solution.

check out our thread here
http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My imac is running mountain lion and last night i downloaded maverick. in midst of installing it it said a powerPC app microsoft word would not work so i canceled the install for the time being. my questions is if i choose to finish installing maverick

my imac is running mountain lion and last night i downloaded maverick. in midst of installing it, it said a powerPC app microsoft word would not work so i canceled the install for the time being. my questions is if i choose to finish installing maverick does that mean i will nevver be able to access word documents stored on my desktop? or do the word docs automatically convert to pages or what? i am so confused. would i be better off just sticking with mountain lion and send the maverick install to the trash? hoping someone will be able to answer my question though i am afraid the response is likely to be just stick with mountain lion so you can keep using word. i had been looking forward to maverick but it seems pretty drastic to not have access to microsoft word anymore by switching to maverick. hope someone has an answer so i can have the best of both worlds so to speak!

thanks for your response Csound1 on the peninsula ... if i go ahead and install maverick and then download LibreOffice or OpenOffice will i then be able to access old microsoft word saved documents on my deskstop through those two free alternatives? i am not that knowledgeable about these things so i am not sure if you are saying i will just be able to use libreoffice or openoffice for creating new documents or whether i can access the saved microsoft docs? are they transferred to OO or LO or what and if editing of the old word docs is needed can i do that through the OO and LO programs or apps (see i am not even sure if i am using the correct vocabulary!) hope you can answer this as quick as the first question, so i can decide to stick with mountain lion and trash the maverick install or proceed with maverick install and hoppe that my microsoft word docs are still accessible through OO or LO or adding to myquestion will pages on maverick be able to open the old word documents? thanks again!

Satellite L755D-S257​9 AMD Drivers Not Working on Fresh Windows 7 Install

Similar Messages

Maybe you are looking for

Satellite L755D-S2579 AMD Drivers Not Working on Fresh Windows 7 Install