Satellite L850-1HP unable to configure downloaded Windows Update files
My laptop had issues from day one which were first the CD-ROM not opening, then the webcam and microphone turning off forever and not being able to be turned on again ever, and last but not least, this summer, my laptop would not connect to any WIFI network at all, it wouldn't even find one.
I went to the place where I bought it for support, they sent it for repairs, a week later, I get it back, it's been restored back to factory settings, everything seemed fine, CD ROM functional.. webcam and microphone too.
So I thought I'd check around and start tyding things up to my liking, then I realise that I need to download some updates from Windows Update, so I do, about 100+ updates needed, I start downloading them, but they don't download up until the 20th minute that it's stuck at 0%, which seemed shifty to me, because then it just jumped up to like 10% and progressed forward.
After downloading the updates, or so it said that it had, I restart the laptop in order to get them working and configured properly.
It didn't. After I clicked restart, it started shutting down, saying that it's configuring and at about 20-30% it rebooted, then it loaded up the same screen saying that it's configuring updates, then it says it failed and says that it's restoring data back to normal, which it never freaking does.
After about two hours of waiting for it to do anything at all, I reboot the PC, same stuff.
Reboot again but this time I restore things to factory settings once more, takes me about 1hr again with a complete wipe of data (of course the OS stays and toshiba apps too), set everything up, name and stuff, accept terms and conditions, blah blah, OS starts up, I check everything and restart.
After the restart, I decide to not configure anything until I've downloaded all the windows updates, so I do just that, BUT, I get the same error again, shifty-slow download of updates, restart and get the same message that it cannot configure updates, and the forever-long wait for the laptop to "restore" data back to normal, which it hasn't done, again.
I'm completely clueless as to what I should do, I've restored factory settings once more but this time I'll just wait for some feedback or try to do whatever I find on these forums that is useful.
Please help.
Hi
The Satellite L850-1HP was preinstalled with Win 8 64bit.
Do you have problems installing the Win 8 updates?
Usually you will get an error message if an update has failed.
Could you post this error message?
Similar Messages
-
Why won't my computer allow to download windows updates?
my computer can not download windows update.It keeps saying I am not connected to internet.
That is a question for Windows support.
-
Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.
UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events. -
Unable to upload/download large html files(71 MB) into rooms
Hi,
I am unable to upload download HTML file(71 MB)into folders of collabration rooms.if it is uploaded also its getting Scripted/corrupted.
other files are working properly.
Is it because of large size or any other configuration settings.there is no error msg buts its getting scripted.
Waiting for your response
Thanks
Amit kumar KoyalHi Kerstin,
the note also says: "This restriction is no longer valid".
With SP19 I do run tests continously that test content up to 2GB.
Amit: What portal version are you running? What repository implementation is the file stored in? If the file is stored in a file system, what is it's file size limitation?
Regards,
Michael -
Unable to switch from Windows Update to Microsoft Update
On a new Windows 7 64 bit computer I am unable to access Microsoft updates. Windows update works fine, but when I click the link to get updates for other Microsoft Products it will only take me to the screen that tells me to use the start menu to check for
updates. I have also tried other links to Microsoft Update from other Microsoft webpages and end up with the same result.
I have Office 2013 Standard installed and activated, and from previous installation experience know that I should be able to access numerous updates through this method.
To verify that I am able to install updates for Office I manually downloaded and installed one Office 2013 update through the Microsoft download site.
How do I get this machine to switch to Microsoft Update?Hi,
According to your description, I think you may had a misunderstand between these two updates installation. Here is a paragraph which talking about Use Windows Update to Check for Updates to other Microsoft Products:
By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft
Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.
If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside
this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”
From: http://technet.microsoft.com/en-us/magazine/ff642466.aspx
Hope this helps. If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support -
Tried several times to unload all old files. Keep getting tthe same message "unable to uninstall iTunes update files:. What can I do?
Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time? -
T430s unable to restart after Windows Update
I'll start with the short version. I just got my ThinkPad T430s, so there were a lot of Windows Updates to install. After one batch, I am no longer able to restart the machine. When I click Shut Down, Restart or Log Out, the desktop disappears, but instead of bringing up the "Shutting Down..." screen, it just shows the desktop background indefinitely until I power down by holding the power button. I have been unable to figure out what is causing this, how to fix it, or which Windows Update was the cause.
Longer version:
I upgraded my machine from Windows 7 Home to Pro. After a series of Updates the problem started. I tried a lot of things, then decided to try reinstalling Windows. Again, it happened after a large chunk of Windows Updates. I have tried a million things. System Restore points don't fix it. "Clean Boot" doesn't fix it. Uninstalling Windows Updates doesn't fix it. Eventually I tried to use the Lenovo recovery CD, but it turns out the recovery partition only contains one of the 4 CDs you use. You don't find this out until you get an error that says "You have inserted the wrong disk" which occurs AFTER the recovery software has wiped all your partitions. So now my recovery partition is gone as well. My current plan is to install Windows fresh to hold me over until Lenovo can ship me the full set of recovery CDs, but if anyone has any ideas for what might be causing this no restart problem, I would appreciate it.kb2647753 seems to be the problem child.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
SCCM Clients stuck downloaded Windows Updates(Need Help)
I am using SCCM 2007 software update for my site. I created a deployment for windows XP patches and it applied successfully on the collection. But now i am seeing in Enforcement states for a deployment, Clients are stuck "downloaded Update(s)" stage,
I have check client logs also but does not find any error.
Can any one help me out over this
Regad
SachinKindly stop trying to bump your post by entering information that doesn't help anyone. On the client side what does it look like. Does the patch say failed when it installs? Do the client even see anything. You can stop the Windows
Update service. Delete the software distribution folder and restart it and it should recreate the folder and attempt to download the patches again and install. Remember the community is here to help when possible. By your posts I assume this
is an emergency so you might want to contact CSS, searching the internet or find a private consultant that could help you faster than we could. Sometimes there just isn't enough information for us to fix a problem. I have seen this problem
every month and every month a machine has a different problem as to why the error occurs. It could be
Previous required patch is broken
Windows update is messed up
WMI issue
Patch downloaded is corrupt. Delete the cache folder and see if the client will retry
Machine simply needs a reboot and it will complete whatever it is doing, retry and install
Client needs to be repair
Take a step back from the problem and write down some problems/solutions so you can track what you are doing and so you can find a direction.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com -
Think I found the fix for no downloading windows updates for HP Printers problem.
I thought I'd post a new topic here. I've figured out whats gone wrong with the windows 10 updates. Someone wrote about it in his thread (I forget the thread url though), and it worked. I've done this on 2 PC's.. W7 to W10, and W8.1 to W10. What you have to do is; 1. Go to device manager. Look down the list for Printers. Open up that arrow and see if you're printer is listed there? If it's listed as Unknown Device then; 2. Go to the HP website and find the driver for your printer on there. Download it through the website / program as though you was installing your printer for the first time i.e. it should check the connection of you're printer during this process. 3. Now you have your printer driver re-installed. Go back to Device manager and check that it now appears listed by the correct name in the Printer section. 3a. If there are other unknown devices besides your printer listed, you need to delete the other unknown devices, leaving only your printer listed. 4. Go back to windows update and retry a windows update (it asks you to install the old failed ones first, so try it, expecting failure, then press the retry button. 5. If all went well, it shouldn't list anymore updates, and you're done!
LuisFL29 wrote:
Well, I was still showing them after 10.5.2, I'm not sure if this was the case for everybody. I wonder if anyone out there still see the warnings. Ahh, sorry I meant warning not errors.
The only one I had was for the remote desktop and that disappeared with 10.5.2
I also installed 10.5.1 combo update and that took out all but the remote desktop warning.
If you have others, then be careful how you fix them.
Most of us have gotten rid of all of them using the combo updates.
Now, if only it wouldn't take 5 minutes to verify permissions ..
See if you can come up with a fix for that -
G570 - Does Lenovo have these hardware downloads - Windows Updates is offering them
I have these offered to me at Windows Updates. I can't find them at the Lenovo download and drivers site. Are they available and do I need them?
Sincerely, Libra
link to image
image(s) >50k converted to the link(s)
Solved!
Go to Solution.hi Libra,
These updates that you posted are optional for your machine as these are driver updates. If you're not experiencing issues with these components, you don't have to update them but they are safe to install (make sure you create a system restore point just in case you need to revert back the changes)
The Intel Management Engine Interface can be found under the Chipset Section and the Graphics Adapter can be found under the Video Section on the lenovo support site. The Logitech input device is probably for your Logitech usb device (can be a mouse, camera, keyboard, etc.).
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Unable to boot after windows update
Hello,
As is was trying to update windows today I didn't expect to lock up my computer, but right now i'm facing the blue screen of death at every startup. The startup repair is not helping.. So right now the only option i see is to reformat my C drive??
This was really unexpected, as I was installing a few of the optional windows updates (mostly drivers i think for the fingerprint reader, graphic card... ) when my pc crashed. I hope to recover some of the files on my desktop before reformating.
So i'm not really expecting too much help here because i can basically do nothing as even the startup repair is not working. But i'm wondering, are there any windows updates that should be avoided? I wish i knew what screwed up my pc. I'm runnign the w520 on windows 7btw.
Thanks!!
Aurel
Solved!
Go to Solution.Welcome to Lenovo Community! Aurel
Try booting your W520 to Windows Advanced Option Menu by continuing pressing F8 during POST (ThinkPad logo) > Then choose Repair Your Computer > System Restore to restore your computer to the previous state. Get back to us with your results.
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future | Please do not email me regarding technical problems, you could post it in the forum
=====================================
Sound Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet -
WRT54GV7.2 Can't download Windows Update?
Can't get the windows update error code 80244019 when internet connection is via linksys local connection. But when i connect it directly to DSL provider i did able to get the windows update without the said error occuring whenever i'm connected via router. Any advice to adjust the router settings?
Change your router's password from admin to something you can easily remember. This way your router will not be hijacked.
Greetings from Northern Ontario, Canada -
Unable to incrementally download software updates with unstable dial-up
I have recently moved to Angola and unfortunately only dial-up is available which is slow & very unstable so I am often disconnected. To date the maximum download/software update I have managed is about 20Mb.
Does anyone know of software that can manage interupted downloads and piece back together the file once all parts have been retrieved ?
I know this exsists in the PC world but I have found nothing for OS-X Tiger.
My guess is I am not the first with this problem so there should be something out there.
Thanks in advance for any ideas.Hi JMB --
Tough situation you're in. I think it can be frustrating here having my Airport broadband connection freeze up from time to time -- you sure put things in perspective.
Give this download manager application a try, perhaps. http://www.versiontracker.com/dyn/moreinfo/macosx/22616
I don't have personal experience with it, but, it did get a five star rating on version tracker, and it promises to resume dropped downloads from the point that they were dropped, which seems like it should solve your problem (if it works as advertised. It is shareware, and I don't know how much it costs to register, but a free trial download (ironic, no?) is available. Seems to be just what the doctor ordered for your problem.
Let us know how it turns out.
-- JDee -
Can't download OS update file ...
Ok ... New iPad 32GB WiFi only ... Trying to update to the newest OS and keep getting file corrupted message. Any help would be appreciated. Wifi works fine but can't seem to download the OS update file. Takes about 30 minutes or more, looks like its downloading but at the end says "file corrupt, disconnect and reconnect or try again later. Thanks everybody ...
DaveDisabled the firewall, not sure if I can diable the antivirus software. Still have the same issue. Takes like 30 minutes to download the whole file, and then tells me "file is corrupt, disconnect and reconnect or try again later ...
Thanks everybody ...
Dave -
Windows Update files: Security permissions has "unknown user"
Ok, this is weird. I have 30 files added in a November Windows update with a compile date or add-to date of 11/21/14. If I look at one of the files. MsSpellCheckingFacility.exe. I can see it is a legit file.
https://www.virustotal.com/en/file/e9dcf987838e9a70fca4e1b1dda217bd1e309cd4f6bac47402120f76aac6edc7/analysis/
However, the security permissions on the file are strange. The user TrustedInstaller is the owner. Now that seems to be typical when the file is a Microsoft updated file. However, the file also has a user added that is unknown.
user ? S-1-14-21
Umm, why is this? Its 30 files like this all REAL Microsoft files....all apparently part of the update. All scanned against virustotal as being revised about that date/time. Did Microsoft release an Update Build with files as a part
of that build that had Microsoft users still attached to them?Hi!
This machine is joined to a domain? This SID with parameter "-21-" indicates a domain. If so, it is needed to verify on local polices if any user had permission on domain workstations enforced by network Administration.
But when researching by SID "S-1-14-21" we have no
reference, as parameter "-14-" is not commonly used.
From articles bellow, we can find how SID works and the well known SIDs:
http://msdn.microsoft.com/en-us/library/dd302645.aspx
http://technet.microsoft.com/en-us/library/dn743661.aspx
As this is not a known SID, I suggest you to try to use the script on link bellow to determine who is the user account:
http://blogs.technet.com/b/heyscriptingguy/archive/2004/12/03/how-can-i-determine-the-sid-for-a-user-account.aspx
The problem can be a user account that had already deleted (this is why SID is not resolved to a name) or a problem on WMI component that is not able to resolve SID.
If not successfull with article above, please post a screenshot on file permission in order to help you further.
Cheers!
Alan Martins
Maybe you are looking for
-
Sharing pics on facebook with my Lumia 800
Hello, I've never had a problem sharing photo's on facebook until a few days ago and now although it looks like it's uploading the picture doesn't show up on facebook at all ? What could be the problem ? Regards, Caroline
-
These are the bugs I have so far discovered in Leopard since I got it last night. I should note that I did an Upgrade install. AirPort Disk - Accounts do not work, only shows shared account. Does however accept user name and password for log in. - Ap
-
None of the control buttons work, it's as if the darn video window is part of the backgroun.
-
How to create a Topic with UPK Developer 3.1.5?
Hi there! Im starting to use the Oracle UPK Developer 3.1.5 but I'm having problems to create a Topic, no problem with de Module and Section creation, but I dont see the option of create a Topic in the Link Section, anybody can help me? Thanks a lot
-
How to fill BKPF-XREF1_HD or BKPF_XREF2_HD in transaction F-43.
I would like to fill field XREF1_HD or XREF2_HD in T-Code F-43, however, I couldn't. How to fill BKPF-XREF1_HD or BKPF_XREF2_HD in transaction F-43. Is it impossible to fill the fields in F-43 ? Regards Chul Woo.