Satellite L850 - Unidentified network trying to use LAN card

I have the Satellite L850 and have been using the wireless without any issues.
Now I find I cannot get the network to work just using my Ethernet cable.
I have tried disabling the wifi and enabling the realtech PCIe family controller, which is the LAN connection, but I keep getting unidentified network.
Is there some sort of confliction between the wifi even though it is disabled and the LAN connection.
I am tearing my hair out. The LAN worked fine before I decided to try the WIFI.

Hi
The Unidentified Network problem can be related to different causes and therefore different workarounds could be possible.
First of all I would recommend you to uninstall the LAN card driver.
This can be done within the device manager. After the driver has been removed, reboot the notebook and install the LAN driver which you could download from the Toshiba driver page.
2nd workaround: Reset the reset TCP/IP protocol
To do that, check the Microsoft knowledge base article:
http://support.microsoft.com/kb/299357
Check also if you some security tools (Mcafee, firewall, antivirus software) dont affect the network connectivity.

Similar Messages

I am using Lan Card in Mac OS version Yosemite. When i remove Lan card it shut down system automatically with some message in chineze language. Before updating to yosemite it works fine.

I am using Lan Card in Mac OS version Yosemite. When i remove Lan card it shut down system automatically with some message in chineze language. Before updating to yosemite it works fine.

Sounds like a kernel panic. Lag the panic and post it here:
Mac OS X: How to log a kernel panic
BTW, this is the Mac Pro desktop forum.

HT204053 I tried to use a card and it will not work for my App Store

I tried to put a different card on file but it won't let me

By not letting you, you mean ... ?
If you are trying to use a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is and it's being declined then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management
If it's something else then some info as to what happens and when would be useful.

HT201209 We are trying to use gift card to purchase music. But it keeps trying to charge my debit card instead of gift card. HELP

How do i use itunes card to buy music. It wants to use my credit card info instead.

Hello
Please make sure if you have not done so already. Download the latest version of iTunes 8.0.2 below.
If for some reason you find it is still charging credit card vs gift card balance, Please contact iTunes Store support below.
http://www.apple.com/itunes/download/
http://www.apple.com/ca/support/itunes/store/giftcard/ (Gift Card Related)
http://www.apple.com/ca/support/itunes/store/creditcard/ (Credit Card Related)
http://www.apple.com/ca/support/itunes/store/buy_troubleshooting/ (Purchase related)

I am unable to setup my 2011 Macbook Air as Wifi Hotspot. Tried both using LAN and Data Card(USB dongle)

I recently shifted to a new place and it will take a while for the telcom company to install the landline and DSL connection. Until then, I am stuck with only a data card at home and a LAN cable from a neigbours router(he doesnt have WiFi).
I have been trying by all means to make my MBA a WiFi Hotspot but it never works. I wish there was a tool like connectiy for Mac. Cant it be as simple as its in the iPhone, I use it for tethering(BT,USB,WiFi) with a click of a button.

Hi, first of all Thank you for your instant response.
Yes, I have updated to version 33, Now the problem is not as random as it was before. I found that I have absolutely no issues when I use FF for the first time after starting my computer. At this point there is no issue at all I can watch videos when both logged-in/logged-out and also they work perectly if I switch between flash and HTML5.
But as soon as I restart Firefox I cannot watch the videos at all. No matter if I am logged in/logged out, I did try HTML5 but still it didn't work. The error message was same in all the cases "An error occurred, please try again later".
We are secured by "Cyberoam" so I don't have access to proxy sites.
By the way these observations are for Windows 7.

Network Error - Sync Using LAN with TCPIP 100mbps

Hi im facing an unknown issue while sync.
1. Using a gprs line i can sync the db (Fairly a large db 400mb)
But when use the LAN it says Network Disconnected during async -Check for network Active.
username/password and server url are correctly entered.
From lan when ping the server no timeouts or any errors.
It does the compose,sending
When receiving phase after about 15minutes i get this message.(Using a vista win32 client)
We have not restricted LAN for anything. For other applications the lan works fine.
Any suggestion is appreciated.
Thanks

Is this timing out on a particular publication item? You probably need to do some SQL tuning on a publication item.
Here are a couple things you can put in the polite.ini
[SYNC]
TIMEOUT_MAX=900
RESUME_CLIENT_TIMEOUT=900
The RESUME_CLIENT_TIMEOUT parameter is the number of seconds that the client should use to timeout network operations. The default is 60 seconds.
The fix involved introducing a new parameter (TIMEOUT_MAX) in polite.ini section [SYNC] which can be used to configure the maximum tolerable timeout period during the receive phase.
So if TIMEOUT_MAX = 60 (value to be entered in seconds) then once OCAPI gets a timeout error it will wait a maximum of 60 seconds before returning an error to the user. During the 60 seconds' period OCAPI may attempt DM reads mutiple times (the number of times depends on the socket timeout value and the TIMEOUT_MAX value).
References
Bug 5491228 - SYNC HANGES IN PROCESSING PHASE WITH FC_TIMEDOUT

Trying to use itunes card an dasking for security questions

I am trying to reset my 2 security questions, went to manage my account and says it will send instructions on how to reset but I never get the email

They only sent to your rescue email address.
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

What is needed to network 2 computers using Airport card

I know I need an airport card in my eMac, but is there any other cards that have to be in the computer? I want to network my eMac with an iMac using a DSL line. The eMac will be downstairs and the iMac will be upstairs. I'm waiting for delivery from Apple of the iMac. It has everything built in that is needed to network but my eMac doesn't. To make my eMac wireless is all I have to buy is an Airport Card and a Wireless Gateway for the iMac which is the computer connected to the DSL modem and Wireless USB adapter with connects to the eMac? What type of Airport Card do I need to buy for my eMac (model #'s etc.) It is the card that inserts above the super drive in the front of the computer. Is there any software that is needed to install Airport?

I am also doing some configuration changes (we have one Imac and two eMac's)
but one eMac does not have a airport card and is hardwired (ethernet) to the high speed cable modem then a apple airport. One Imac and the Emac with a airport card work fine, it is a bit tricky finding the correct airport card (or airport extreme card if you have a ATI graphics card (use about the mac/system profiler then click on more to see if you have a graphics card (which affects which airport card you need, there are alot of resellers on the net so you should find what you want.
If in doubt there is a free program mactracker which provides data on every mac made (available off off versiontracker.com (free site just register) it will guide
you on the type of card needed. I was quite amazed at the amount of different spec eMac's made in their relativealy short history.
Macwireless.com does sell eMac cards (for two models) but also antenna type
or flash drive appearing USB based wireless connectors that may help.
I found the mactracker program helpful (alot) as alot of web sites provide some vague info and I would hate to se you get stuck with a non returnable card.
The actual card install does not look hard (its done through the cd rom drive door.
I am not sure why we did not get a airport card for ours when we bought it.
Wish I did as it would have saved some $ (maybe) and surf time making sure I find the right one.
We did have a antenna wireless antenna for a "green" Imac (long gone) and it ran on OS9 but it was finicky when we had the airport base station upstairs
and the Imac and antenna in the basement (about 50-75 feet)
Best of luck
Hope this helps, I am not a expert, the serial number on the cd drawer will
nail down the model you have and what you need.
We have been working adding a laser printer and airport express and the two macs with cards work fine but the Emac with no card can not be set up yet. The laser printer will sure save on ink!

Hi, I am from Palestine trying to use visa card to purchase an application. It doesn't work because my country seems not included in the list. I hope to find a solution for that . Thanks in advance

my country is not included for visa card options

Nope. You can only have one credit card attached to an account at a time. Its not that big of a deal to use two accounts, users do this all the time. Create the second account(UK Account) in iTunes on your computer...sign out of your Italian account first. Then authorize your computer for this new account: Store>Authorize this computer. Then sync your phone. Now, to switch accounts on your phone: Settings>Store...tap the ID shown...sign out...then sign back in with the ID you want to use.

I have my foctory unlocked iphone 4s , I over seas for vication tried to use SIM card to activate that but it did not activate, i tried to restore it also ,now the iphone did not show any of the i cons or any thing the only thing it shows SIM Not Valid so

Hi this my consorn about my iphone i m over seas now for vacation and have hard time to activate my SIM card and when I restore my iphone and update the new soft wear ios6 shows just like it is not working

We need to get your service up and running drakewit! Thanks for all the thorough information and everything you've tried. Let's start here, where did you get the HTC 8X? Did you purchase from VZW? We need to make sure the phone isn't on a lost/stolen list, or active on another account.
Please Follow me and send a Private Message with the full name on account, as well as your 10-digit mobile number so I can access your account and check things out. If you could also include a number to follow up with you, if needed, it would be great!
Thank you,
Vanessa_VZW
Please follow us on twitter @VZWSupport

Windows 8 - Unidentified Network problem

I am facing unidentified Network the problem in windows 8 .
Problem : unidentified Network
I am using wired connection.
Note : It is not a permanent issue, it gets resolved automatically ,but after a week it again arises.
It was working fine today but stopped without any error message.
Thanks in advance for the solution

Hi,
Here is some methods you can try to fix this problem.
Firstly, excute these command below in evevated CMD:
netsh winsock reset
netsh winsock reset catalog
netsh int ip reset c:\resetlog.txt
ipconfig /flushdns
If problem persists, try to reinstall Network Card driver for test.
If no use, try to update the firmware of your router.
Roger Lu
TechNet Community Support

Satellite C660d-14G: network controller is not installed

Hi.
I installed windows 7 on my toshiba,
I have problem with the wireless driver.
I downloaded all availible drivers on the site, but there is no change.
In the device manager write that the network controller is not installed.

Hi
> network controller is not installed.
Network controller could be Lan card or Wlan card.
Are you sure that you need to install the Wlan driver?
As far as I know the notebook has been equipped with the Atheros AR9285 802.11bgn Wlan card.
The LAN card is 10/100 Base-TX Realtek 8105E-GR
By the way: The latest Wlan drivers can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads

Vendor Payments using Credit Card

We are trying to use credit cards as a payment method in F110 for vendor payments. Does anyone have any documentation or please share your experiences on paying vendors using credit card?
Process would be : Pay vendors using Corporate credit card and then pay credit card company.

I would set up a GL account for the credit card company and use it like a bank account, assigning it to the payment method credit card in bank determination in FBZP. Then you can use F110 to clear the vendor items and credit the credit card account. You probably pay the credit card company by direct debit so this can be posted aginst the GL account directly from the bank statement.

How to use wild card with variable in powershell

HI
i am trying to use wild card with variable but getting an error message, "You cannot call a method on a null-valued expression."
$src = 'C:\Temp'
$TabletzipPath = $src + "tab*.zip"
i would like to copy the tablet zip file which is placed in in $src to be copied in $TabletzipPath.
i am using tab* because this file name changes continuously. so if i give a fix name for example tablet1.zip than it works fine.

Not sure if the wildcard will work without seeing how you're using the variable.
That said, I can say that it looks like you're missing the backslash between the $src path and the wildcard filename. As-is the above code assigns a value to $TabletzipPath of "C:\temptab*.zip" instead of what you are likely expecting ("C:\temp\tab*.zip")
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Windows 7 x64 802.11n Wirless LAN Card #2 Randomly stops working

Hello, I've had a re-occurring issue with my network card over the past 2 weeks, it randomly started after I received a windows update. Often as I'm playing a game / surfing the web I will experience a moment where I lose all connectivity and my wireless
connection is telling me it is "Limited connectivity". Although this happens if I go to my Device Manager and scan for available hardware changes to my network adapters, my Wireless LAN Card adapter disappears, after scanning a couple more times
it will return and I will regain all of my connectivity and the issue will not happen again until I reboot my computer.
I'm not sure how I can fix this as I have opened my computer to check if the network card was loose, and everything seems like it should be working properly. It is also strange that it began occurring after an update.

Download and install the latest Wireless LAN Card driver from the website of the manufacturer.
S.Sengupta, Windows Entertainment and Connected Home MVP
Turned out that the manufacturer switched websites which must have messed up something with the auto updating, thanks.

Satellite L850 - Unidentified network trying to use LAN card

Similar Messages

Maybe you are looking for