Satellite L875 - No Stereo Mix for recording or streaming sound

I've seen other posts about this problem, but would like to know if there is a solution for an L875 laptop running Windows 7 64-bit version.

Hmm maybe you should update the sound driver too
As I said in my first posting, I could enable the stereo mix on my Satellite. But there is one difference to the P300-16N; my notebook supports Realtek sound chip, your notebook supports Conexant CX20561 sound chip
Maybe this is the reasons why the stereo mix is not available.

Similar Messages

Satellite A300 - Series Stereo Mix not available with Conexant sound driver

Hi . . .
I have Toshiba Satellite A300 PSAJ0E notebook . . .
I was useing Windows XP Professional . . .
But I am not able to use Stereo Mix the peculiarity . . .
I installed Conexant HD SmartAudio 221 Driver . . .
What can I do in this subject . . .
I thank right now . . .
Best Regards . . .

Unfortunately, but you cannot do much
The point is that this is a Conexant sound driver issue. This options or setting is simply not available in Conexant sound driver and therefore the Stereo Mix port is not available and cannot be used.
I think only an sound driver update can helps so lets wait for a update.
Cheers mate

No stereo mix for iq520 need help

need stereo mix for iq520 . win 7

Hi actionman3. Not sure exactly what you are looking for. Are you looking for drivers or how to change audio settings?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

"Stereo mix" or record what you hear... Soundblaster u

With my onboard audio there is no "stereo mix" or record what you hear option in the recording control ...So when I am listening to an audio feed I can not record it with Adobe audition (as I can with another computer)
If I disable onboard audio and add a sound blaster 24 USB card will I have that function?Message Edited by k2koq on 0-22-200707:49 PM

I will answer my own question:
Just got the Blaster Li've 24 USB..
Installation...easy
sound ...excellent
Does it record what it hears..YES!
thank you soundblaster.

Satellite P300-16N: No stereo mix for sound recording

Hello,
I'm french also excuse me for my english...school ^^
My problem is that:
I have a toshiba Satellite P300-16N and I will recording the sound of a music in internet starting from my PC...
But, I don't have the "stereo mix"...
I have a "conexant high definition audio smart221" and in the menu to notch: "to post the decontaminated peripherals" but nothing... :(
Help me please :(
http://images4.hiboox.com/images/3008/9849a2fadd2adf1f7cc2cba4c7e06e6c.jpg

Hmm maybe you should update the sound driver too
As I said in my first posting, I could enable the stereo mix on my Satellite. But there is one difference to the P300-16N; my notebook supports Realtek sound chip, your notebook supports Conexant CX20561 sound chip
Maybe this is the reasons why the stereo mix is not available.

Audio output low using stereo mix under recording HP Pavilion Dv6 Win Prof Prod# A3E82AV

HP Pavilion Dv6 Win Prof Prod# A3E82AV with High Def Audio Codec
When I bought this I asked if it had "What you hear" under recording and was told it had "Stereo Mix" instead and it would do the same. I accepted that as my Gateway has this as well and it works great. However, using the same settings as for the Gateway and using either Audacity (Latest Version) or DAK7 Wav Editor it's like I can't get the recording signal high enough. Sound barely register on the wave chart with the recording level as high as I can get it both in the programs as well as under the Stereo Mix Property. Playing back what I record require the volume to be at max and the quality is very bad. Am I missing something?

I have had the same problem ever since I bought my laptop with "beats audio". In my former PC this worked perfectly with Realtek HD Audio. Someone please help!

Satellite L645 - No stereo mix

I hava a Toshiba L645, but it no have stereo mix even if i checked "show disabled devices" in "recording" tab of sound option in Control Panel. Anyone help me. please! thanks.

ATTENTION: FOR WINDOWS 7, 64BIT ONLY.. I have slightly modified the drivers that COME FROM TOSHIBA FOR THIS LAPTOP.. And re-enabled Stereo Mix.. Full list of install instructions, and driver download links are available on my blog. http://tinyurl.com/stereomixfix This is no joke, This is tested, working, using the drivers FOR A WIDE RANGE OF LAPTOPS. Everything works, Mic, Stereo Mix, Everything.

Software for recording audio streams?

Is there a recommended software for capturing audio and converting to mp3?

Hi everyone -
I was using Audacity (freeware) for recording streaming audio and able to edit or convert at will . However for Mac ( being a new user) I am not sure what software is suitable. Recently bought an iSoundStudio from Apple but find the functions extremely restricted. Appreciated very much if someone out there can recommend a good one similar to audacity. BTW, audacity has the Mac version but my system blocked the download,
Gnol

Any Sample code for recording+playing streaming live video?

Hi all,
I'm new to FMS3,
I wanna create a page for webcam live recording and playing,
is there any sample code for reference (i can only found the code
for live recording but do not have live record+play)?
Many thanks.
I have installed FMS3.0 and FME2.0 on my machine, so is it
capable to do so?
Many thanks.

Thanks for your reply, but I have another question:
My live file (test.flv) is recorded under this path:
C:\xxxx\FMS3\applications\path\streams\_definst_\
But seems FMS3 can only play video under this path:
C:\xxxx\FMS3\applications\vod\media\
My only success is on this source path rtmp://ip/vod/test in
the component FLVPlayBack.
So is it happen to all free version of FMS3 or I have to type
sth more?
Many thanks.

MSI 975X with Realtek HD drivers - cannot adjust recordin levels, stereo mix gra

Called MSI and they could not help me.
Have XP and 975X Power up board. I know there is a shortcoming in the Realtek software drivers as per what I read on Google. Have not found a fix, wonder if others have.
Recording Sliders (volume) are grayed out and not move-able (locked) for recording volume for anything except Master Volume.
Cannot adjust line-in volume or stereo mix for recording.
Ideas without putting in a 3rd party card?
Thought I had this working once but perhaps I never did.
Tried uninstall, reinstall, safe mode install, old drivers, new drivers, blowing away drivers, every checkbox under the sun. Thought I found a registry fix somewhere but I cannot find now.
Thanks so much
Peter

Hello Peter,
Quote
Recording Sliders (volume) are grayed out and not move-able (locked) for recording volume for anything except Master Volume.
This does not have anything to do with your mainboard. It is basically a limitation of the Realtek Sound Drivers for Windows XP. Google "Realtek Mixer XP" and look at the images you find. No individual recording sliders to be seen, no matter what board. Here is an ASUS Example Screenshot:
If you need to adjust microphone input volume, go to the Playback part of the mixer and scroll it to the right using the <> buttons until you find a slider for the jack you microphone is plugged in (compare picture above, I don't have an MSI Screenshot at hand). You can enable microphone boost here and adjust the input volume. The same is true for Line-In.
In case of microphone problems, make sure you microphone is calibrated. There is an application in the Realtek installation folders called "miccal.exe". Run it to calibrate your microphone.

Is Stereo Mix available for the Satellite L300?

Hi,
I have been looking far and wide to see if I can find out how to get stereo mix for the L300 and I can't seem to find anything for it.
Is Stereo Mix available for the satellite L300?
Can I get it and if I can how?

Take a look here:
+Not possible to record sound from Internet+
http://aps2.toshiba-tro.de/kb0/TSB8A02HA0000R01.htm
At the end of this document you will find this:
+The Conexant Audio Device does not support "Stereomix" device.+
+This is specification of the Conexant hardware+.
If you have Realtek sound chip then the Stereo Mix is supported!!

Recording mixer for F756NR notebook

Hi All,
I have been using a Presario F756NR notebook for awhile and revisted an old chat client. This chat client uses recording mixer(like in xp). I did some searching on how to get to this in vista. I found a website that suggested enabling hidden devices in the recording tab of the Sound applet of control panel. My computer is a Presario F756NR notebook using Vista 32 - bit. The purpose for wanting/needing the recording mixer is to play mp3's though sound card in this chat client. Any and all help would be appreciated!

Hi all,
Just for some further clarity, I tried the show hidden devices and nothing happened. i've since scoured the web for info. This is what I found from another board:
Here is official answer from Microsoft:
http://www.stereo-mix.com/stereo-mix-issues/no-stereo-mix-for-conexant-hd-audio.html
So, you have only one way:
http://www.stereo-mix.com/stereo-mix-issues/stereo-mix-not-supported-here-is-universal-solution.html
BUMMER is all I have to say...the second link is not recomended. Suggestion: if you choose to pursue that route start with volume low so you dont damage your sound card!!

No stereo mix Satellite L75 A7380

Hi all
No stereo mix on a Satellite L75 A7380. Tried installing Win 8.1 Realtek drivers. Still no luck. Has anyone figured this out?
Thank you!

Not a single person knows how to add stereo mix to recording options?

Satellite C655 Stereo mixer no available?

How do I get a stereo mixer on this laptop so I can do online karaoke?
Got Satellite C655.

Hi
As far as I know the unit supports Conexant sound chip and as far as I know the stereo mix is not supported by Conexant.
Found this:
No Stereo Mix for Conexant HD Audio
http://www.stereo-mix.com/stereo-mix-issues/no-stereo-mix-for-conexant-hd-audio.html

Info please...control surface and mixer for fcp and audio recording

i'm looking for a control surface for final cut pro and also xlr/line inputs for recording guitar and vocals in cubase or audacity.
read all the info here after numerous searches. still some questions.
was looking at the tascam 1082 but not sure of the build quality...i saw one and it looked a bit cheaply built. the two demos at guitar center were falling apart. didn't look nearly as well built as the mackie. also i have been reading here and elsewhere about bugs/problems etc.
was looking at the m-audio...not sure about that one...$1250...
was also looking at mackie control surface...but no firewire...how do you hook it up to a mac? also no audio inputs. what would i need to buy to work in conjunction with that for recording audio? if i bought the mackie, i'd still have to buy an audio inpur device and that would end up costing as much as the m audio.
i know i could just buy a mixer for recording and forget the control surface...i already have a shuttle pro which works fine and i have gotten used to using the mixer in fcp...no problems. but the motorized faders on a control surface sure would be nice
so questions:
how does the mackie connect to a mac and what other device(s) would i need to record audio and how would they hook up...would they play nice together?
ppl who own the tascam...happy with it? used the mic and line preamps? are they noisy?
do i need an additional firewire bus reguardless of which control surface i get?
how does one route the audio for these when in fcp? i currently route my audio through my dsr 11 deck. will the control surface just go through firewire or would i have to actually jack into the control surface with additional cables and have to remove my present cables from my speakers everytime i want to use the control surface?
sorry so many questions. it's really tough to make an informed decision in buying something if you don't understand the mechanics of it.
btw, appreciate the info so far that i found doing my searches.
thanks
carl

I've got the Tascam FW1082 and I absolutely love it. I can't believe I ever edited without it. I'm considering upgrading to the 1884 in the future.
As for the mic preamps, they sound great. Nice and clean. There's no such thing as a line preamp, but the line inputs are clean as well.
For routing, I go to the 1082 via firewire until I turn on my external video monitor, at which point I send both video & audio to the deck and route the audio from the deck into a pair of the mixer's analog inputs. That way you avoid the delay of external monitoring. The 1082 allows you to listen to both the computer & the inputs at the same time, so switching back and forth is seamless.
As for durability, I've had it out on a few location recordings, but most of the time it's on my desk. It's still in mint condition. I'm sure if it was on a display where any 10 year old could come mess with it, it wouldn't be in as great of shape, but then again, a Neve console wouldn't look that great if every little brat that walked in the door could play with it. If you take care of your stuff, you'll have no issues with this mixer.

Satellite L875 - No Stereo Mix for recording or streaming sound

Similar Messages

Maybe you are looking for