Satellite M-115 S1061 Ethernet Controller not configured correctly

Hi all. I'm the third person who's owned this laptop and I have none of the original documentation, software - nothing. I recently had to reinstall the OS and since I didn't have the original OS I had to use another copy of WinXP pro that I had. Well, the network adapter is installed fine and working correctly, but the ethernet controller is not. I don't know a lot about these things, but I thought that if one was working right the other should be too. Do they use different drivers? I tried the file here:
http://cdgenp01.csd.toshiba.com/content/support/downloads/lan_driver_realtek_25058B.exe
and I tried the latest file from the realtek site, for my Realtek RTL8139 Family Fast Ethernet NIC.
Neither of those solved the problem. The Ethernet Controller is still there in DM with an exclamation mark next to it - along with the SM Bus Controller. Could the bus controller be the reason the controller won't install right?
What am I missing? Any help will be greatly appreciated.

Thanks, all, I appreciate the replies. Unfortunately, the problem persists. I've downloaded all drivers, installed everything I could find for the M115. Everything is working fine (including now the SMBus controller) EXCEPT the Ethernet Controller. It's still not installed properly. I've manually searched for a working driver in every lan driver download for the M115 I could find, and also the PCI_Install pack from the Realtek site. None of them work.
Someone please clarify something for me: is the ethernet controller a component of the Network adapter or is it related to the wireless card? I'm thinking it must be for the wireless because I don't have it on my desktop system, which doesn't have a wireless card. But if it's for the wireless, why can't I get an internet connection through my cable modem? The Network adapter on my laptop is working, and I see that all the settings are exactly the same as on my desktop, and when I run IPconfig it shows an IP address and subnet mask, but I keep getting that message that my conenction has limited or no connectivity. In addition to the Client, File & printer Sharing, QoS Packet Scheduler, and the Internet Protocol, should I be seeing anything else when I look at the Connection Properties of my laptop? (And for the record, I've installed the wireless drivers too.)
Could the problem have something to do with me using WinXP pro rather than the home edition originally installed on the laptop? Maybe none of the drivers are compatible with the pro version? Doesn't seem likely, but I'm getting desperate here. Also, is it possible I get no internet connection because I'm not using the original computer I set up my internet on? Something to do with different MAC addresses or something?
TIA!

Similar Messages

Satellite C50 - Secure Boot not configured correctly Build 9600

Hi,
Recently purchased a refurbished Toshiba Satellite C50 running windows 8.1 operating system. Was very pleased with it but found the message 'SecureBoot not configured correctly Build 9600' in a watermark in the bottom right corner of my desktop.
Decided to search the internet for a resolution and after going on 3 troubleshooting sites, found out about the BIOS Setup required, however it warned that this was for advanced users who know their stuff about the technicalities of computers. Whilst I am computer literate, I'm not someone who likes to mess with the advanced options. Then, I stumbled across a reliable computer blog which had a detailed post on SecureBoot.
( Link to blog and specfic post:
www.techrepublic.com/blog/windows-and-office/deal-with-the-secureboot-isnt-configured-correctly-watermark-in-windows-81/ )
I thought this would resolve my issue, and I will admit it did help, telling me to use windows powershell as a precaution before using the BIOS setup. I was glad I did as it came back telling me that I have a non-production SecureBoot policy present on my laptop in which case I would have to ask for technical support for a system specific solution which would typically be a firmware update.
I did try to phone, but the line was very busy and felt it might be easier to post this issue on a forum.
If anyone has an answer please help as I really would like to enable SecureBoot if possible, as I believe computers should be set up with the best security options possible and it makes me feel comfortable knowing that it is set up securely.

Someone commented the blog and posted this solution:
The registry fix to remove the watermark is as follows.
1. Start the Registry Editor with Admin rights (C:\Windows\regedit)
2. Navigate to the following path
-> HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System.
3. There, the two values " ConsentPromptBehaviorAdmin "and" EnableLUA "set to" 0 ".
You can also try to enable the secure boot option in BIOS (in case its not already enabled)
To get into the BIOS, press F2 while powering ON the unit.
Additionally recommend checking this Microsoft page:
http://windows.microsoft.com/en-us/windows-8/secure-boot-watermark

Labview error GPIB controller not adressed correctly

I get this Labview error: GPIB controller not adressed correctly (LV5.1, win NT4) when i try to send data to a HP4275A LCR meter. How ever it works on an older system running with LabView 5.0 (also NT)!!!
How can I get rid of this problem????

Hi Diego, thanks for the hints!
I tried to configure (GPIB) everything standard.
when I try a 488 command initialze, I get the controller conflict, when i don't do this I get atime out problem either by 488 write-command or by 488.2 send-command.
the differences between the systems where it works and where not are:
working: Win 95, LV 5.0, GPIB-card/TNT (plug & play)
not-working: WinNT, LV 5.1, GPIB-card/PCI
i tried to set baord config to the same parameters...
on the faulti system however I see the instrument with the MAX and I can send commands, without problems !!!!
Also the driver you posted does not work (but the NI-communicate program ;-)
i have no clue what else to do!
btw. how do I copy the spy output when running the program? I may provide
this to find errors.
Since MAX indicates the board is all right I guess it is not necessary to reinstall the boarddrivers?!

PerformancePoint Services is not configured correctly but I'm Site administrator

Hi experts
I recenlty create a business intelligence site and set my active directory user as administrator.
I'm server and database administrator too.
but when I want to create a data source I get this error:
The Data source cannot be used because PerformancePoint Services is not configured correctly
I see some solution in then interent but some of them say that should set unattended user for performance point service.
I'm site administrator and Why I should set unattended user?
thanks
semi developer

You should set the Unattended Execution Account if you don't want to set credentials for data sources.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Guest variable 'guest info.return_code' not configured correctly.

Hi,
I'm converting a SQL Server 2012 from Base DBVM to Base DB Template. After a while working on the conversion I get this error:
"Guest variable 'guest info.return_code' not configured correctly."
If I double-click the error I get the following message: "Cannot get detail information for the specified resource bundle."
I'd really appreciate if anyone can help with the issue.
Regards
Fernando

carlasummers wrote:
...Error: variable hourlyRate might not have been inialized and variable hoursWorked might not have been inialized. ....Haven't read your code, but whenever I see an error like this, I find that usually correcting what it tells me to correct helps: initialize the variables.
i.e.,:
    double hoursWorked = 0.0;
    double hourlyRate = 0.0;
    double weeklyPay = 0.0;also: never use float when you can use double (there are exceptions but they are few).
also: You need to get the employee name within the loop. Also it would help to add the prompt: "enter \"stop\" to quit" or something of that nature. Assume that the users of your program are idiots.
Also, when posting code here, please use code tags so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
[code]
// your code goes here
// notice how the top and bottom tags are different
[/code]Best of luck.
Edited by: Encephalopathic on Apr 25, 2009 6:56 AM

Lookup properties not configured correctly

Hi,
I have configured lookup query ,in which I am taking value from the RO form data like below.
UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$'
Although the resuls are coming as expected I am getting "Lookup properties not configured correctly" this message in lookup popup window.
Please provide some guidelines.
Thanks,
Pallavi

Lookup Query :
select distinct UD_IDMSP_IDMS_User_ID from UD_IDMSP where orc_key in (select orc_key from oiu where ost_key in (select ost_key from ost where ost_status in ('Provisioned', 'Enabled') and obj_key = (select obj_key from obj where obj_name = (select lkv_decoded from lkv where lku_key = (select lku_key from lku where LKU_TYPE_STRING_KEY = 'RETS.RODisplayName.Lookup') and lkv_encoded = 'IDMS'))) and UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$')
Lookup Column Name : UD_IDMSP_IDMS_User_ID
Column Captions : User ID
Column Names : UD_IDMSP_IDMS_User_ID
Column width : 100
This is all

Lookup Query error: "Lookup properties not configured correctly"

Hi!
I have come up with some problems on configuring lookup query.
I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
For Lookup Query:
This were the steps done on design console -->form designer-->properties tab:
On " Grupo(lookupfied) " I set the following properties:
Column widths = 100
Lookup Query = select Organization from test_lookup
Lookup Column Name = Grupo_teste
Column Caption = Organization
Column Names = Grupo_teste
On design console for Lookup definiton I set the following:
code: Lookup.KON.Grupo_teste
field: Grupo_teste
Lookup type: checked
Required: uncheked
Code key | Decode Key
Organization Organization
Any idea why this is hapenning? Any suggestion is more than welcome!
Thank you.
Kind Regards,
Kon

Refer this:
User list lookup
Column Names = usr_key,usr_first_name,usr_last_name
Lookup Column Name = usr_key
Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
Column Captions = User Key,First Name,Last Name
Column Widths = 10,100,100
Have you tried this:
b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
In lookup coloumn name=act_key
In coloumn width =100
In coloumn names=act_key
in coloumn caption =Organization Key

Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

Using LV 2012 and ULx 2.02 LV driver:
LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH. All my configurations are correct on the hardware and Instacal tests the ports OK. I've reinstalled everything and still see the same issue.
Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped. This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
I've attached my VI I'm using for debug.
Jeff
Attachments:
test of Wilmington.vi ‏19 KB

I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations. There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH. I'm currently using .net calls to work around the issue until the ULx driver is updated. I'll post that when I see it. Attached are the .net VI's that I'm using for simple static IO.
Attachments:
USB SSR DOT NET Write Bit.vi ‏20 KB
USB SSR DOT NET Read Bit.vi ‏21 KB

"This device is not configured correctly: Code 1"?

I have a brand-new iPhone 5c and every time I try to repair the connection between my phone and my computer, I get the message "This device is not configured correctly (Code 1)."
What on earth does this mean, and how can I fix it?
Thanks.

Then we simply will not tell you anything.
Good luck.
FYI, making such statements is a good way to be either ignored or get snarky responsed. We are users like yourself. Leave the attitude out.

Tecra-S11 - Ethernet-Controller not installed (Win7)

After setting up Window 7/64 (exactly Win2008 server R2 enterprise) newly I installed all 64-bit-Drivers. for the Ethernet-Controller (INTEL) it still says "...not installed". When executing the related driver (TC00248700A.exe) the extracting works but afterwards nothing happens....
(Tecra-S11 13M)
Can somebody help? No hits with ethernet-controller in the forum yet....

I have checked Toshiba download page and Win7 64bit LAN driver for your Tecra must be THIS one.
Test it please.

Enabling CredSSP Authentication Protocol - not configured correctly.

Hello,
I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
I have tried the following on the client machine:
Ran these commands on an Administrative PowerShell (Windows 7):
1) Enable-PSRemoting
2) winrm quickconfig
3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
5) PS C:\Windows\system32> Get-WSManCredSSP
The machine is not configured to allow delegating fresh credentials.
This computer is not configured to receive credentials from a remote client computer.
Since it did not succeed I looked in the settings:
1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
- Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
There was WSMAN/*.mydomain.com in the list.
- I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it
did not change the outcome.
3)  Local Group Policies Editor -> Computer Configuration
-> Administrative Templates -> Windows Components -> Windows Remote Management (WinrRM) -> WinRM client
- Enabled the setting, "Allow CredSSP authentication".
4)  Computer Configuration -> Windows Settings ->
User Rights Assignment
- Double-Click the setting "Enable computer and user accounts to be trusted for delagation"
- Added my user and computer to the delegation list.
I re-ran the commands from above but still got the same output.
Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
Thanks!

Hello,
I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
I have tried the following on the client machine:
Ran these commands on an Administrative PowerShell (Windows 7):
1) Enable-PSRemoting
2) winrm quickconfig
3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
5) PS C:\Windows\system32> Get-WSManCredSSP
The machine is not configured to allow delegating fresh credentials.
This computer is not configured to receive credentials from a remote client computer.
Since it did not succeed I looked in the settings:
1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
- Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
There was WSMAN/*.mydomain.com in the list.
- I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it
did not change the outcome.
3)  Local Group Policies Editor -> Computer Configuration
-> Administrative Templates -> Windows Components -> Windows Remote Management (WinrRM) -> WinRM client
- Enabled the setting, "Allow CredSSP authentication".
4)  Computer Configuration -> Windows Settings ->
User Rights Assignment
- Double-Click the setting "Enable computer and user accounts to be trusted for delagation"
- Added my user and computer to the delegation list.
I re-ran the commands from above but still got the same output.
Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
Thanks!
See
Secrets of Powershell Remoting book by Don Jones
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

TFS Test Controller not configuring

While upgrading to TFS 2013 test controller to update 4 I received this error during the configuration process.
Service cannot be started. Microsoft.VisualStudio.TestTools.Exceptions.EqtException: The Controller service could not be started. TF400324: Team Foundation services are not available from server http://tfs.podserv.modelsysllc.com:8080/tfs/modelsyscollection.
Technical information (for administrator):
Page not found.
The remote server returned an error: (404) Not Found.
at Microsoft.VisualStudio.TestTools.Controller.ControllerServiceBase.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
The collection mentioned is a project collection that no longer exist and not the one I pointed to in the sonfiguration setup.
Any help would be great.
Thanks,
James
Architect

I re installed a crashed TFS installation and upgraded to TFS 2013 update 4. The Test controller has been upgraded to 2013.4 and when I follow the configuration process I get the error below;
Service cannot be started. Microsoft.VisualStudio.TestTools.Exceptions.EqtException: The Controller service could not be started. TF400324: Team Foundation services are not available from server http://tfeserver:8080/tfs/modelsyscollection.
Technical information (for administrator):
Page not found.
The remote server returned an error: (404) Not Found.
at Microsoft.VisualStudio.TestTools.Controller.ControllerServiceBase.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
The project collection address I selected in was (http://tfeserver:8080/tfs/modelsysllc). I have tried several time to reconfigure the test controller but it still grabs this no longer exiting project collection during the configuration
process. Where can I find this setting and clear it, so that my setup can continue?
Thanks,
James
Architect

USB Ethernet will not configure

Hello,
Today I started to have problems with my USB Ethernet dongle on my Yosemite Macbook Pro Late 2013 Retina. I deleted the device from Network Utility then rebooted thinking I would re-initialze it. After rebooting, the System Info recognizes the USB LAN device but Network Utility does not list it. This appears to be software issue. I have confirmed the dongle works fine on another laptop (Windows). Any ideas how to fix this issue?
TIA

The driver is built into Mac OS X. The dongle worked fine for weeks on Yosemite. It is a Cable Matters Cable Matters USB 2.0 to 10/100 Fast Ethernet

Windows xp Ethernet controller not installed

I have created a windows xp partition using bootcamp. However the ethernet and network drivers are not installed. they show up with Question marks and no amount of updating drivers seems to work. Any ideas?

Hi jugla,
if your winXP is running then insert your macOS Install disk - that's where the drivers are...

Intel - Solaris 7 - Realtek Ethernet Card - Not Configuring - WinNT

I have a Intel system with a Realtek card on it. I am wokin in a network of WinNT/Linux systems.
The card specification is : Realtek RTL8139.
Well i am not able to ping nor connect to my other systems within my network. Please guide me. Thank you.

I have a Intel system with a Realtek card on it. I am
wokin in a network of WinNT/Linux systems.
The card specification is : Realtek RTL8139.
Well i am not able to ping nor connect to my other
systems within my network. Please guide me. Thank you.

Satellite M-115 S1061 Ethernet Controller not configured correctly

Similar Messages

Maybe you are looking for