Satellite M100-165 PSMA1E - Upgrade from XP Pro to Win7 Ultimate problem

During installation Win7 Ultimate (Eng) with current XP Pro the system shows en error (something like couldn't find a certain file) and the installation stops.
In the beginning of the installation I delete all the partitions and create new ones.
At the same time Win7 creates it's own partition with the size of 100MB.
Using the same disk I installed Win7 on Compaq Presario CQ60 with no problems. Also instead of XP Pro.
What could be a problem?
Do I need to download and use any special software from Toshiba?
Currently I just recovered XP Pro using Acronis Universal restore from an external USB drive.
I will really appreciate for your help.

Thanks a lot for your reply guys!
I've also checked all the possible knowledge bases before posting my message.
Yes, Win 7 disk is original, it's 32-bit version and, as I already mentioned, I installed it on my HP CQ60 with no problems...
It's also a pretty old laptop, but i didn't even need to install prepared drivers. Win7 did everything.
The only difference in my Toshiba now is that i've upgraged 80GB hard drive to SeaGate 320GB. Under XP Pro it works perfectly. But again, it shouldn't be a problem.
Ok. I've tried to install win7 three times already, but i will follow your advice and will set BIOS to default.
I will inform you about the results.
The case is very strange.
Thanks.

Similar Messages

Satellite M100-165 cannot shutdown - turns itself on after a few seconds

Hello!
I have the same or very similar problem to those described in threads:
Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]
When I try to turn off my Satellite M100-165 ("Turn Off" in Windows or even by pressing the power button while I'm in BIOS) it turns on after a few seconds. It doesn't turn on when it works on batteries. It also doesn't turn on when I press the power button for 4 seconds.
I tried to recover system with recovery CD (Windows XP Home). I also tried it with Windows Vista. Still the same.
Actually I have BIOS version 2.90 (upgraded from version 1.90 as far as i can remember) but with earlier version the problem also existed.
I think that when I had BIOS version prior to 1.90 this problem didn't existed (but I can't remember number of that version).
Thank's for all suggestions.

Hello
It is very unusual issue and, for me, there is no some simply explanation. It will be interesting to know what Toshiba experts say about this. Make a call and let us know what they say.
The strange is that the same happen with two different operating systems. I cannot say for sure why this happen but your notebook is somehow confused and obviously change shutdown with restart. If this is result of BIOS update service people should know about this.

Error 0x8007000E-0x2000C in upgrade from 7 pro to 8.1 pro

Issue with error on upgrade from 7 pro to 8.1 pro of error 0x8007000E-0x2000C. I have tried the install several times and this error returns every time.

Hi,
First, we need check the system requirements for Window 8.1:
System requirements
http://windows.microsoft.com/en-in/windows-8/system-requirements
Or, you can firstly run upgrade assistant tool to help you determine if you are able to install Windows 8.1.
http://windows.microsoft.com/en-in/windows-8/upgrade-from-windows-7-tutorial
if all things have been done, we can collect the following logs, maybe we can find something about this failure:
C:\Windows\Panther\Setupact.log
C:\$Windows.~BT\Sources\panther\setupact.log
Alex Zhao
TechNet Community Support

Where can i find the upgrade from logic pro 7.1.1 to 7.2?

Hello there.
Is the upgrade from logic pro 7.1.1 to 7.2 still available out there somewhere? I know I'm a bit behind the rest of the world but financially I'm taking the 'do the best with what you can' route!
Never used logic before, moving up from garageband and cubase sx cos everyone says it's a better program.
Many thanks,
GDx

Hi
If I remember correctly, the 7.2 update was a "Paid for" update, with a new dvd.... so you are most likely out of luck.
The good news is that Logic Pro is pretty cheap on the Appstore
CCT

How do I update/upgrade from Logic Pro 8 to 9?

How do I update/upgrade from Logic Pro 8 to 9?

There is no update, you have to purchase Logic 9 from the App Store, it's $199, which is close to the price of an update.
Warning, if you do purchase Logic 9 from the App store it will download 2GB of additional patches/sounds/loops...etc. This is for first time buyers so their App Store Logic will have some basics to work with before trying to download the additional 20+GB of loop/instrument data. If you have a full installtion of Logic 8 it's possible the 2GB of data Logic initially downloads will mess with the instruments and sounds you've been using, past projects may not load properly. Just something to be aware of.

HT5794 I just upgraded from Logic pro 9 to Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???

I just upgraded from Logic pro 9 to Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???
I have checked both the resource folders, and made backups from Logic pro 9, but its not recognizing them, or saying that they're missing a bunch of samples.
What do i do?

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

CS5 upgrade from premiere pro 1.5

Is it possible to upgrade from premiere pro 1.5 to CS5?

1st, CS5 is no longer sold, but you may still buy CS6 standalone, or a monthly subscription to CC on the Cloud
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
2nd, even if CS5 was still being sold, Adobe only offers upgrade pricing for one or two versions, so 1.5 would be FAR too old to qualify
-but, as I said above, you have not been able to buy CS5 for a long time, 3 or 4 years
If you are asking will CS5 upen a version 1.5 project file... not likely... too many changes between versions
If you have version 1.5 and can't get it to activate, read below for a special version 2 that you may use
CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?

Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?
Should I just ignore the nay-sayers and go ahead with X Pro?
Thanks in advance for anyone willing to bring me up to speed.
Dharmamitra
Kalavinka Press
Optional & Extraneous background data:
I've taken a break from book design, layout, and publishing since finishing 10 books 2 years ago (Kalavinkapress.org). But now I'm back into the thick of it with a another flock of long-doc books in my lap.
Result, I'm now faced with upgrading my IDCS3 & Acrobat 7 Pro. (I'm still OK with my P-shop & Illustrator versions), but am utterly clueless about the advisability of Acro X Pro over the still-available Acro 9 Pro. (I've seen some fairly loud squeaking about X Pro problems.)

It depends a bit on what you're going to use it for. I do mostly forms work and have both versions, but do most of my work with Acrobat 9, and even use Acrobat 7 for some things. There are some initial bugs with Acrobat 10 that need to be worked out, but I'd probably recommend it for most folks.

Upgrading from Adobe Pro 8 to XI

While upgrading from Adobe Pro 8 to XI it asks if I want to "Deactivate EPIC_APP_118". What is it and should I?

Looking through the forums, it appears that error message is related to a Zenworks Licensing Manager System. If you are installing in a enterprise environment, you might want to check with your IT people before you mess with uninstalling and installing new software.

Can i upgrade from Logic PRO 7 to Logic express 9 (upgrade version)?

Hello
I was about to upgrade from Logic Pro 7 to Logic Studio 9 when i noticed that all the fetures i need are actually now in cheaper Logic Express 9.
So would it be possible to upgrade to Logic Express 9 from Logic Pro 7? or will it only upgrade from older versions of Logic Express?
Many thanks
Tom

Hi,
guess that's not possible. But i strongly recommend upgrading your Logic Pro 7 to Logic Studio. It's not that much more money, but i bet once you have the new Express version, you'll desperately miss some of the features you only have with Logic Pro/Studio.
I would recommend to call apple support or ask a dealer to find the correct upgrade version.
Fox

I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

Need Detailed instructions to install new hard drive & upgrade from Vista Home to Win7 Enterprise

Hi folks,
I have this laptop machine:
Lenovo 3000 G530 4446-23U Laptop Computer - Intel Pentium Dual-Core T3400, 2GB DDR2, 160GB HDD, DVDRW, 15.4" WXGA, Vista Home Basic
I need to install another hard drive and I also want to upgrade to Win7 Enterprise Edition while doing the rebuild.
I am very nervous about doing this as I upgraded a W530 from Win7 basic to Win7 Enterprise and ran into all kinds of drive issues. And I thought that would be about as straightforward as you could get, but it a far cry from that.
I do not want to have to go through that again - I still don't have everything working on it.
Can someone please tell me the precise steps to take to do this upgrade and how to ensure that I obtain ALL the drivers for EVERYTHING on the laptop and how to ensure that all those drivers are correct and exactly how to install them.
If there are other issues associated with upgrading from Vista Home to Win7 Enterprise, please advise of those and the solutions.
Thanks very much.....
Gus

hi gmercanti,
Welcome to the Lenovo Community.
The easiest way to upgrade Vista to Windows 7 is to run the Windows 7 Installer inside WIndows. Follow this guide for instructions. After upgrading, you will need to install the Windows 7 Drivers for Lenovo G530 4446 via http://support.lenovo.com.
Spoiler (Highlight to read)
Let me know if you get any errors.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Satellite M100-165: message Network Cable Unplugged appears

My NEW notebook TOSHIBA M100-165 /model PSMA1E/ with network adapter Intel 10/100 VM Network Adapter have big problem when connected to my office network!!!
So many collisions I can see on my 3COM HUB /model TP800/. But this HUB is perfectly working with other computers in my office /another 5 computers works perfect on this HUB!
When I tried to connect my notebook directly to switch on the floor /model of switch is CISCO Catalyst 3500 series XL/ the message "Network Cable Unplugged" appears.
Only for testing I tried another notebook TOSHIBA in our network but with network adapter Intel 10/100 VE Network Adapter. And this notebook works perfectly.
I hope You can solve my problem as soon as You can!
Thanks in advance!
Best regards!
Ivo Vachkov

Hi
I hope that your unit has factory settings and the LAN card is installed and listed properly in device manager. Please check as first if the card is also enabled and configured properly.
Try also to talk with network administrator in your company. He can check all settings and be sure that everything is ok.

Acrobat X Pro Mac upgrade from 9 Pro Ex PC

I had been running Acrobat 9 Pro Extended on my PC and when I recently went back to a Mac, Adobe sales said I could just buy an upgrade and enter my old serial number and it'd all be good. Doesn't like my old serial number as it wants a Pro version from the Mac for a serial number to upgrade from. In need of getting this working ASAP and have been on ignore with tech support for the past 30 minutes after being told it would be a 3-6 minute wait. What do I do?

Order an Adobe product platform swap or language swap
Mylenium

Satellite M100-165 PSMA1E - Upgrade from XP Pro to Win7 Ultimate problem

Similar Messages

Maybe you are looking for