Satellite M100 - After BIOS update it doesn't boot anymore

Hey everybody :)
BIOS problem: I was updating *BIOS* by WinFlash and my laptop "freezed" so BIOS is DAMAGED. Laptop does't boot up.
I was updating my XP laptop to *BIOS 3.00* version.
How to repare BIOS?

Hey mate,
I agree with Akuma and I think in this case you can do nothing. If the notebook froze during BIOS update I think the ROM module is now destroyed and must be reflashed or exchanged. In this case only an ASP can help you.
On the Toshiba website you can find a list of ASPs and you should contact the nearest one. Speak with the technicians and they will try to help you.
Good luck! :)

Similar Messages

Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.

Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

Satellite Pro A300 (PSAG9E) - After BIOS update Windows doesn't boot

Reboot went fine after BIOS upgrade and Windows XP logo appears loads for few seconds then beep and reboot - last known good or start Windows normally same effect.
Rebooting back to start again - this is a brand new laptop - using BIOS from Toshibas official download site.
Pretty annoyed as trying to figure out how to refresh or downgrade BIOS.
Have taken battery and RAM out to see if I can clear it?
Any ideas anyone?

Hi
Hmm this is very strange usually if something would went wrong during the BIOS update procedure then your notebook would not boot up.
It would be dead.
But in your case the notebook boots up but just the OS does not start properly
Maybe you should try to reinstall the OS again?
I see you are using the Win XP I think the Vista was preinstalled. Am I right?
Hmm. in my opinion you should try to boot from the Toshiba recovery disk and should try to reinstall the OS in order to check if this issue could be solved.

Satellite A300 - After BIOS update black screen

Hello all,
I just applied the BIOS update on my Satellite A300. After the update successful, the system does a reboot. Now when I try to power it up I get no display, I can hear the hear running, the CD Drive reading the DVD, led blinking.
The Toshiba ASP tolled me (phone call) the mainboard should be replaced after a unsuccessful bios update, but it's very expensive for me, :(
Please can you tell me if they are any way to fix it without mainboard replacement? The bios is a Insyde and according to the website the bios has bios [Recovery Technology|http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP doesn't know that.
Please can you tell me how to start the recovery procedure if it's possible (key combination?),
Any help about fixing the laptop without mainboard replacement will be much appreciated.

There are cases when the chip that containes the bios is removed from the motherboard and with a memory writing device (special to do this) it is posible to rewrite the bios(in my country, Romania it is not possible at the Toshiba Service, they change the motherboard wich cost 400-500 euro, but there are guys in electronics who do things like this...).
This is the happy case to rewrite, when this is possible. But there are exceptions when you can't do anything and you have to change the motherboard.(bad bios update coud burn your entire motherboard or several components /parts).
In what I've read " For example, on other manufactures PC compatible systems with Award BIOS and AMI BIOS there is dedicated small area, often about 8 kiB or so, called bootblock which starts first" , if your bios si from award or ami they have lets say a small progam which starts first, checks if bios is oki then is booting normal , if not it tries to recover it and boot.
In your case this is not possible even if you have the specific computer with that kind of bios because the screen doesn't start.
*Your case is simillar to mine* so you could hope that your video card is broken and not your motherboard.
My advice to you is to go to the service and diagnostic the problem and see what is the solution.

Satellite P500 - After BIOS update the number pad isn't working anymore

I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
Anyone have any ideas? Thanks in advance

I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
*EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
Message was edited by: Matrixion

Satellite L - After BIOS update it won't start up again

I just got an email saying there was a BIOS update for my laptop. It started to install but my computer shut down and won't start back up
PLEASE HELP!!!!!!!
The update was: ACPI Flash BIOS version 1.90 for Sat/Sat Pro L355D/L305D (PSLE0U, PSLC0/1U)

Hello
And what Satellite notebook you have exactly? Is your notebook designed for this update or is it another model?
After a failed BIOS update you can try this workaround: Remove the AC/DC adaptor and battery then wait one hour. After this connect the AC/DC adaptor and battery again. Now try to start the notebook again.
If the notebook doesnt start you need help from a notebook technician. Therefore contact the nearest authorized service provider. They can help and will try to reflash the ROM module I think or the mainboard must be exchanged.
Greets

Satellite M40- after BIOS update sound doesnt work anymore

After i was update my Toshiba M40 (ATI) from default bios to version 1.5, my sound card (audio) was disabled...
I can't use audio - after reinstall of drivers - it's found a new hardware - but say - is broken...
What's up?

Hello polewiak
I am a little bit confused with your BIOS update. I have checked the Toshiba download page and there are updates available but you must be careful which one you use.
Version 1.50 is designed for units with INTEL graphic chip and version 1.20 for units with ATI graphic chip. If I am understood you right you have updated INTEL BIOS version on your ATI unit. Am I right?

Satellite M40X: After Bios update keyboard keys don't work properly

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
How can I resolve my problem?
Can I recover the old bios version?
Thanks
Gabriel

Hi there,
no you wont be able to recover the old BIOS. The only two options are:
1. Retry the BIOS update and check if its working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
Greets

Satellite L - After BIOS update the screen is black

Hello,
I made a BIOS update on my Windows 7 64 bit and then the OS get frozen. After I restarted the laptop, there is only black and nothing appears on the laptop.
What can I do?

Hi
Have you tried to remove the battery and AC/DC adaptor? You should test this and after one hour you can connect both devices again.
In worst case you need help from an authorized service provider. The technicians can try to reflash the ROM module.
Sorry, but I think in this case you can do nothing.

After BIOS update I can't boot in EUFI anymore

Hello everyone, I recently replaced my HDD for a SSD and installed Windows 8.1. Then I wanted to install the drivers because some features did not work. So I went to this:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad-z580 and started at the top. I installed the 64 bits BIOS update for Windows 7 and 8. I followed the instructions... At first I installed 5fcn95ww_public 64bit.exe. The laptop restarted and after that I was not able to boot my laptop anymore . I coulnd even boot from a USB to reinstall windwos (I thought this might help but this BIOS problem has noting to do with windows)
I am able to go in to the BIOS and change settings... I tried to reset the BIOS but it did not help. Then I changed the boot mode in "legancy support". Now it is able to boot from my SSD. But I want it to boot from in UEFI mode.
Please help me. I think I just destroyed my laptop. (I'm sorry for my bad English)

Hi mezian, and welcome to the Lenovo User Community!
That's not right . I suggest you return the laptop and exchange, or call support to get it repaired.
I don't work for Lenovo. I'm a crazy volunteer!

SATELLITE A105-S4074 BIOS UPDATED AND NOW DONT BOOT!

Hi,
I just have updated my old A105-S4074, with the lastest bios update available ACPI Flash BIOS version 6.00 for Tecra A7 (Intel) (PTA70U) and now is not even showing the post screen to enter to the BIOS
I flashed it using the cdrom way, and everything worked fine and finish sucesfully, but just when it restarted i got black screen!
The fan start,cdrom, but no hd light... just that and no video.
I tryied removing battery and ac, presing the power button for 30 sec, etc, and is just not working.
Any idea?
Thanks you in advance!
Regards

It's bad news that you may have corrupted your BIOS, even though you used the boot CD update method.
Regardless, you can try all these steps first:
Computer will not turn on
If nothing above works, see these intructions, and try to work your way through them for your make of BIOS. The BIOS.ROM file they mention, should be on your BIOS update CD.
BIOS Recovery procedures
Good luck.
Mike

Pbms w T400 after bios update: long time to boot, TPM&internet connect pbms

Hello,
I have a T400 thinkpad, type 7417 that I bought in the US in Nov 2008 (it was downgraded from vista to xp). In November 2011 the computer was running slow so I decided to clean it up a bit and then do the maintenance recommended by the thinkvantage program. I proceeded to do all the smaller updates and the last one that was recommended was updating the BIOS (from what I understood). I left the computer doing these updates overnight, making sure it was plugged into a power source as specified by the update.
The next morning I found that my computer took 5-10minutes to start up and when it did, the screen resolution was altered as if it was in safe mode or something…I removed the HD and saved my data, then tried to use the Rescue and Recovery program to revert to factory settings. Although it seems that the factory settings were indeed restored I still have many problems with the computer. 1. it takes 5-10min to start (blank screen pre-windows logo) 2. it gives me 2 error messages once it has booted: 2a. "Tvttcsd application has encountered a pbm and needs to close." 2b. "There was a pbm connecting to the tpm (security devie) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled driver could also cause this problem. Please refer to the online documentation for more information." 3. it cannot connect to the internet (either wifi or ethernet) 4. Ad-aware tells me it detects a malicious program running but cannot seem to clear it. I have seen several threads about these problems but cannot figure out if they are all connected or not. Before touching anything I was hoping for some help on how to proceed - I am no expert but I can follow instructions I am currently running avast on the computer to hopefully get rid of whatever viruses there may be and see if that can solve the problem. All help is really really welcome please!!!! lore
Solved!
Go to Solution.

lore schrieb:
"There was a pbm connecting to the TPM (security device) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause the pbm. Refer to oline docs for more info."
When I try to look into the Windows firewall I get the following error message:
"Cannot start Windows firewall/internet connection sharing service."
Not sure if both of these are related or not. Any ideas? Would re-installing windows help?
Thanks so much for your help! lore
Did you "optimize" your computer with "Tuneup utilities"? This might cause problems like that.
Also check, whether the services "Windows Firewall" is set to start "Automatic" and running.
Third party desktop-firewall like Zonealarm, Kaspersky or Symantec Internet Security also can cause that problem. In that case remove it including all policies, test the connection and re-install it. Activate training-mode and disallow automatic blocking unknown outgoing connections.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

Satellite M100 - After BIOS update it doesn't boot anymore

Similar Messages

Maybe you are looking for