Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

Similar Messages

Sound not working after installing ios6

Sound not working. After double clicking bar at bottom has the line for sound but button to slide is mssing

Uninstalled IDT software from programs, removed/rolledback the drivers, downloaded the HP Support Assistant and it recommended an IDT software, installed that via HP Support Assistant. Everything is working fine now.

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

Keyboard and Mousepad does not work after installing windows support software.

I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard stopped working again.
Computer: iMac 21.5 in. late 2012
Used Windows 8.1 Pro 64bit
The keyboard and mousepad that I have is bluetooth.

Hi,
Have you checked it from Sounds yet. Please
Right click the speaker icon
Select Recording devices
You should see a "tick", otherwise Right click it and enable it.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Webcam not working after installing Windows 7

Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}

arby96 wrote:
Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}
Which version of Windows 7 is installed? (32 or 64-bit)
I see there is a BIOS update available only in Vista. You may wish to consider cloning your hard disk to an external storage device. Macrium Reflect Free is ideal for this. Recover your OS to the Vista OS and apply the BIOS update. Use Macrium Reflect and the clone image file that you created to return your notebook to Windows 7. Once you have done that, try the webcam updates available at the HP web support portal for your TouchSmart notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

USBs not working after installing Windows 7. Please assist.

HP - Beats Special Edition
Model: 15-p030nr SKU: 7018105
Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS.
I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...
I notice there is not any CHIPSET driver folder.
Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found.
Please advise.
This question was solved.
View Solution.

Hi:
See if downloading and installing the amd chipset drivers works for you. Reboot after install.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Sound not working after installing beats audio

Laptop: HP DV6-7001TU
OS: Windows 7 Home Premium (the laptop came with HomeBasic, I had a copy of HomePremium used that).
I have ran into this problem lately that was not there before, I bought the computer almost 5 months ago, as soon as I bought it, I did a complete format and installed Windows 7 Home Premium on it (hate the bloatware that comes + it came with HomeBasic).
The audio worked fine uptill now, my brother got a new DV6 laptop with beats the other day, and the sound felt better than what I had. So I figured it was the default sound drivers that I had. I went over here and got my self the sound drivers. Now eversince I update the drivers I have no sound from my speakers if I am not using sound for a long time, if I restart the sound comes back, but if I am not using anything sound related for a while and then try to use it agian it disappears.
The workaround I have found (to restarting computer everytime), is that if I click on the vloume icon in the taskbar, and then click the speaker icon which opens the "Speakers and Headphones Properties", and then just click OK on the window that opens, the sound comes back.
Things I have tried so far
Once I have no sound again, I tried the Windows "Find and fix audio playback problems", it found nothing.
I uninstalled/rolled back the IDT codec from device manager, the default drivers were loaded and sound was back, once I did a restart Windows found the IDT drivers and the problem was back.
I uninstalled/rolled back the IDT drivers, uninstalled the IDT software from the add & remove programs, downloaded a fresh copy from the link above and installed again, same problem.
Please help! This is driving me crazy, I get a lot of Skype calls during my work hours and I constantly have to hang up on my clients and than fix the sound and call them back agian, this is highly inconvient.
This question was solved.
View Solution.

Uninstalled IDT software from programs, removed/rolledback the drivers, downloaded the HP Support Assistant and it recommended an IDT software, installed that via HP Support Assistant. Everything is working fine now.

Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

touch screen keybord is comming but touch screen is not working no responses...plz help me

Hi @jewaxen
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your touchscreen is not responding.
Was there any changes made before this issue occurred?
Have you checked for viruses or malware? Microsoft Malicious Software Removal Tool
Have you ran the HP Support Assistant to aid with HP updates and resolving issues?
Have you tried using Using automated troubleshooting (Windows 8)
Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
If after completing the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Help please! Keyboard not working after installing windows XP sp3 on T61

I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard customizer utility from some online information, however, it's not helping. I searched the lenovo support website, but there are lots of drivers there,I don't know which to pick. Does anyone had met the similar issue or know how to solve it? Thanks a million!

I have exactly the same problem. It is not related to docking for me - just regular standby/resume. A reboot solves the problem. Not exactly what you'd expect from a high-end business model. This is the first time in my over 22 years history of using computers that the keyboard fails randomly. Fix this IMIDIATELY Lenovo!
Message Edited by Chigu on 06-13-2009 12:39 PM

Scanner not working after installing Windows 7

Just installed Windows 7 and lost the ability to use the scanner function in Adobe. My scanner still works with my HP C6380 softwar
e. Was wondering if another driver was available for Windows 7. Yes or no, send if possible
I am usin Acrobat 9.0
I have already done the following.
1)    a. Launch Acrobat
       b. Click menu File->Create PDF->From Scanner->Custom Scan...
       c. In Custom Scan dialog, select the driver installed.
       d. Click Options button in Input section.
       e. Set Data Transfer Method as Native Mode.
       f. Initiate Scan process. Or, remove any compression settings in scanner's user's interface while scanning (Set compression to None).
2) Login with new user Account
3) Deleted Preferences folder.
4) Download the update for 9.1.
5) Repair Acrobat installation.
6) Scan the image into another application as a TIFFfile, and then convert the TIFF file to a PDF file.

Does your scanner work without using Acrobat? If not, you should go to HP's web site and see if there is a Windows 7 driver for your scanner you can download and install.
You should also update Acrobat to 9.3.

DVD ROM NOT WORKING AFTER INSTALLING WINDOWS 7

i am using hp dv1050ei with windows 7 ultimate 32bit. before i was having vista. since i have installed 7 on my notebook most of the times my dvd rom doesnt read the dvd. i can hear the sound from drive and light blinks but nothing happnes and it doesnt read the dvd.
what to do please i am facing great trouble because of this issue.

I HAVE FOUND A FIX! Searching through the support blogs paid off in a big way. A minor registry edit is all it took and my drive is working like new! Here's the fix. My system is Windows 10 64-bit.  Resolution 5: Create a registry subkey
Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go tohttp://support.microsoft.com/gp/admin
Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.
To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the Run box. (or right-click on windows icon in lower left corner)
    Type regedit in the Run box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to New, then click Key.
    Type Controller0, and then press Enter.
    Right-click Controller0, point to New, and then click DWORD(32-bit) Value .
    Type EnumDevice1, and then press Enter.
    Right-click EnumDevice1, click Modify....
    Type 1 in the Value data box, and then click OK.
    Exit Registry Editor.

RDP not working after installing Windows 2008 R2 Service Pack 1

Hi,
We have Windows 2008 R2 Data center editions with Service Pack 1 which we recently implemented. Now when i create new virtual machine in Hyper-V with Windows 2008 R2 Standard edition without Service Pack then i can able to take RDP of virtual server. But
when i install Service Pack 1 on Windows 2008 R2 Standard edition (Virtual Machine) then i can't able to take RDP.
By using local administrator i can take remote desktop but using domain administrator i can't take remote desktop. Domain Administrator is part of Remote Desktop Users group. I tried to reinstall and uninstall KB2667402.
Your help is highly appreciated.
Regards,
Arjun
Arjun V.

Hi Arjun,
It might happens that it occurs due to some antivirus software. You can try to disable or uninstall the 3rd Party security software in the Windows Server to see whether same issue still exists.
In addition for your issue, another suggestion to try uninstalling the 2 windows updates and then again re-install the update manually with below link provided and restart the server. After restarting check whether the issue still occurs. You need to uninstall
& re-install manually below 2 updates:
1. KB2667402 – Download Link
2. KB2621440 – Download Link
Hope it helps!
Thanks.

MBA sound not working after installing Mavericks

I updated my MacBook Air to the OSX Mavericks, and now the sound doesn't work. It'll work right after I restart my computer, but if I put the laptop to sleep and turn it on later, the sound won't work at all, whether I'm trying to use the built-in internal speakers, headphones, or external speakers. This only started happening a couple of days ago, and all of the solutions I've looked for online haven't helped. Is this a problem with the new operating system update? Is there any way I can fix it?

Sounds like a reinstall of Mavericks to me
It's either that or wait until Apple sends out a fix, if ever.
Do you know how to reinstall OS X?
Remember to backup your stuff before doing anything.

Sound not working after installing security update

I went into the Audio panel in System Preferences, but it says there is no output device.

Reset the PRAM. It contains files relating to audio out.
http://support.apple.com/kb/HT1379?viewlocale=en_US

Dvd/cd player won't work after installing windows 8.1

I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

Hello Gindel95,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows did you have installed on your computer before upgrading to 8.1?
Has your computer completed all of its important Windows Updates?
In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Satellite M100 sound not working after installing Windows 7

Similar Messages

Maybe you are looking for