Satellite M105-s3064: Need software to create image of my fingerprint

is there anyway that could use the fingerprint reader of my laptop to read fingerprint and save them as image format (ex: *.bmp) .. any software is able to handle this?
I just want to store the image and then apply my own work on it.
Please i need help.
Any one have a sloutions. Please if u have inform me.

Hi
You will not find such software here on the Toshiba page and telling truth I dont think that such software exists
But who knows maybe you will be able to find it somewhere in the World Wide Web.
Google simply
Regards and good luck

Similar Messages

What is the best compatible graphics software to create images in ibook author?

What is the best compatible graphics software to create images in ibook author?

What you choose may depend on your budget, skills, etc.
Preview comes with OS X.
GifConverter and Pixelmator are in the (Mac) App Store and work well.

Need software to apply image filter to text

I am looking for software which will apply a filter or effect to text to mask or fill images into text. The software is a suite of several packages offering different image fills per pack. I do not remember the name of the software nor do I recall the name of the manufacturer. Uggh.
Please help if you know the name of the software or manufacturer I am speaking of. The software has a series of pre-defined library of images to apply to text with a "click of a button". I do not remember if the text is rendered in 3D or 2D. The software I am referring to is either a separately packaged application OR a plug-in or filter for Photoshop. It offers 3 or 4 volumes of images or textures to apply to text.
For example, it has filters like Swiss Cheese or Sponge. The Swiss Cheese example would fill the text with cheese but also have the edges distorted if a hole in the cheese intersected with the edge of the text thereby creating a "dent" or "hole" in the surface. Some other effects were bubbles, stone, grass, flowers, giraffe, zebra, etc.

Alex,
Could it be the Extensis PhotoTools (note: name might have changed, since I got it many years ago)?
Good luck,
Hunt

I need software bios full image to programmer bios chip for my labtop

hallo i need bios software for programmer bios chip because my labtop does't work after up date bios
I used the program bios, which is on the site, but it did not work for the piece I need a full copy of the bios to programming on my own programming
The model number of the device dv6-7030ee
thank you

abowdee wrote:
Well I want a file bios so I can run the machine what is the solution, so I will not run the computer what is the solution when hp Company
plz help me
thank you
No one will give you that. You only can download to update the bios you will not get the source code and any bios you download and edit is use at your own risk. And since we have no P/N no one can direct you to the BIOS update your system needs. If HP support didn't give you this information why do you think the HP user are going to have access to that information.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Need to reset Protector Suite fingerprint reader - Satellite M105-S3084

My wife was interested in using the Protector Suite fingerprint reader that came on her Toshiba Satellite M105-S3084.
She tried to enroll, but it looks like someone already enrolled, and it needs the original enrollee's fingerprint or password.
I extracted a confession from my teenage daughter, but it does not recognize her fingerprint and she can not recall the password.
She is thinking one of her friends were playing with it (this would have been a year ago).
Any way we can reset everything, so that my wife can start fresh?
Thanks in advance.
EK

Hi
Seems same problem I have.... Follwoing error message box appread;
<Error
Operation Failed. Duplicate tempplates already exist>
I used to use VISTA and I registed forefinger's finger print until yesterday .I deleted all partition then installed Windows 7 and installed all drivers. I could successsfully register middle finger but I was not able to regisger forefinger anymore.
Some other reason, I created new windows profile and deleted old windows profile. After this, I could not register not only forefinger but also middle finger as well. I guess these finger print data stored outside of windows user profile but I cannot find where it is. How could I delete registerd information?
Device: Portage R600 11B PPR61E
Please adivese.
mabo
Message was edited by: mabo

Need help to create report with jpeg/gif image

Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
John

Hi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John

Hi, In need of help creating a simple effect to image.

Attached is an image which shows more or less the effect I am needing to achieve.
http://i303.photobucket.com/albums/nn149/Jaybeedubya/FotoliaComp_635945_xs3N3VFLwPNTIOm1.j pg
I created the image above by desaturating the colour image of the man and then adding a new purple layer and selecting 'vivid light' from the layer palette drop down box. In doing this the man became purple but the white area surrounding him stayed white...I then adjusted the layers on the first layer so that the white part became purple - the final result is what you see in the attached image.
The problem is this - I need to create this effect for 15 or so images all with a specific purple pantone colour, I need to create these for print ready artwork. All the pictures (ie the man) I will be using, need to look the same kind of shade. The way I was creating these before was to adjust the bottom layer so its grey rather than white so that the white area becomes purple.
Confusing huh, If you dont understand my question (and I dont blame you!) then all I need is to create a set of 15 images that look like the attached image (using a specific pantone) but I have no idea how the best way to do it is.
How would you guys achieve that? Any help greatly appreciated.

So its gonna be a two-color-job?
Because with the extreme depths adding Black at least might be beneficial.
You could make a Selection of a black&white-version-of-the-photographs luminance, inverse it and, in the Channels-Panels PopUp-menu, choose Add New Spot Channel for the Foreground color and select the Pantone color.
Then Add New Spot Channel for the background-color and fill that solid black and hide the layers that contain the composite of the photograph.
This should leave You with blank composite channels and the two Spot Channels visible.
Indesign can handle either psd- or DCS2-files containing Spot Channels.
The problem I perceive here is that depending on the print-process and the background color selected it might proof necessary to knock out the foreground elements if the company is very strict on their CI colors. Unfortunately simply inversing the foreground selection would probably not work as this might leave the mixed-color-areas greyish.
Are the prints gonna be offset or silkscreen?

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Need your advice about image creation

Hi,
I am trying to create image of my c partition on Satellite A100-529 - no luck. Norton ghost freezes (booted from DOS) just after start, g4l cannot load (kernel panic), partimage, being a part of SystemRescue CD package does not see the hd drive! Has anyone tried using any image creation/restore software other than Toshiba Recovery CD? Any luck with it? Please let me know.
Thanks in advance for any help on that matter.

Hello Czeslaw
I have very good experiences with NORTON GHOST 2003 (Version 2003.775). This application runs under Windows and I have tested it with several Toshiba notebooks. It works perfect.
I use my unit just for work and I create image every two or three weeks. I create it always on partition D and if something goes wrong I can start Ghost application and restore the unit from partition D. If you want you can also create DVDs.
Bye

Need to square various images - some tall, others wide - ideas?

I have several thousand images. They vary in size and some are tall and others wide.
I need to have all images square. Not wanting to lose resolution or have smaller images expanded and look bad.
How can I make all of my images square? Which if any of your programs would do that in a batch process?
examples:
An image 200 x 400 end up 400 x 400
an image 800 x 600 end up 800 x 800
and so on. Or if anything make them all 600 x 600 wand resize down large images or give white space around smaller images.
Which program if any will do this?
thanks,
Dave

Mass resizing tutorial
So you're wanting uniform size? You can use Image Processor script along with an action to make them all square in 1 simple click of the Run button (after you apply the right settings, of course.) Yes, all however many thousand images you have! We want to get this done in 1 swoop, which is possible, especially since all the images are ending up being the same size. I'm going to hold anyone's hand and do this step by step for anyone who has minimal to expert experience in photoshop. This explanation is very simple to follow.
1: Preparation to make them square
Heres the first step for the canvas size to be made uniform and square-y with a simple action. If you don't want square-y but still want uniform, skip this step. Let's say you want to make those thousands of pictures all 600 x 600 pixels. This is the preparation step. Make a new blank document 400 x 400 pixels. Make a new action, and name it Canvas Resize, and hit the record buton to start recording your actions. Change the canvas size to 600 x 600 pixels, and after you do that, stop the action recording. Close the document.
2: Organize so PhotoShop can process all your photos in 1 swoop
So we want to make everything 600 x 600. I'm using CS4, but CS3 and CS2 (and probably older versions of PS) all have a feature called Image Processor. This is the time to consolidate all the images you want to process into 1 main folder for an easy 1 click operation. Make two folders on your desktop and label one Pictures and the other Processed. You can either toss all your picture files which you want to process into the Pictures folder for a giant mess, or if you're organized, toss a bunch of organized folders into the Pictures folder, and you can keep your folder organization automatically. I'd recomming copying (NOT moving your pictures, COPYING) and organizing your pictures to be processed in the Pictures folder so that you don't potentially ruin your current organization of your photo archive. I've made my messes before moving files around and trying to figure out where I pulled them from.
3: Now that we're organized:
After you've consolidated your files, we will use photoshops Image Processor feature. First, click on File -> Go to Scripts -> Click Image Processor. A dialogue box will pop up with a bunch of options. Section 1 (section numbers are on the left) is "Select Images To Process." Click the Select Folder button and find the Pictures folder on the desktop with your images in it, and select the folder. Click OK. If your images are in multiple sub-folders inside the Pictures folder, and you want to process everything in each folder, check the Include Sub-Folders box so itll process everything inside. In section 2 of the Image Processor, "Select the Location to Save Processed Images," select where your batch of images is going to be saved. Select the Processed folder for this. If you have your photos organized in a sub-folder folder structure, and want to keep that organization, check the "Keep folder structure" box so it will structure your folders inside the Processed folder the same way it was structured inside the Pictures folder. Now for the file type. Choose whichever file type you want to save your photos as. Check "Resize to fit", and in the resolutions for width and height, put the same number in both. This will NOT stretch the images, but it will take whichever dimension is larger and scale it your specified number, and keep the aspect ratio the same! For example, say you have an 1800 x 1200 image, which is a 3:2 aspect ratio. If you type 1200 x 1200 in the dimensions, wether vertical or horizontal, it will resize the long dimension of the image to 1200, and the shorter to 800 and keep the 3:2 ratio. Cool, huh? This makes it painfully easy to do thousands of pictures overnight if you want them the same maximum dimension wether vertical or horizontal.
Now for the magic:
In section 4, "Preferences" in the Image Processor, you can have PS apply actions to pictures after they've been resized. Ain't that fancy? Check the Run Action box, and select the Canvas Resize action we created earlier. Since we created an action that changes the canvas size to 600 x 600 pixels, the action of making it square will be done all in 1 shot! Any picture 600 x ? will be made into 600 x 600 with whatever color you chose your background to be in recording your action. Now, click the Run button, and your computer will angrily churn all your images into perfect 600 x 600 pixel squares. All numbers I used were for expample only. Pick whatever number you want. If you want 3000 x 3000 squares, punch in 3000 x 3000, make the canvas resize action for it, and go for it!
Anyone who reads this and tries it, let me know how easy or difficult it was to use this tutorial for you. This method is how I organize the CDs or DVDs which I submit to register my photos to the US Copyright office. I generally make a batch of 800PX JPEGs, images out of all the photos I selected to copyright, burn em, and I'm done within the hour. For my first copyright CD, I made a copyright CD for registration in less than an hour for 4 years of my photographic work.
And P.S.: Upsizing always dulls or pixelates a photo unless you're going to take the time and enlarge each one with enlarging software, and that's a whole new batch of processing in its own. And.. yes, I wrote this whole tutorial just for this post, lol. I enjoy teaching technical knowledge. Hope this helps and whoever reads this enjoys it!
-Bruce P.
-overfocused.com-

System Image Utility seems stuck in "Create Image" step.

I'm building a NetRestore image with Snow Leopard 10.6.8 as base OS, but added 3rd party software packages. When I hit the "Run" button, it checkmarked all the steps before "Create Image." So I just left it to run the last step, but it's been running now for three days.
I didn't add THAT many packages. I checked the Force Quit window today, but SIU is not shown in red saying that it stopped responding. Creating this image shouldn't be taking this long.
SIU is running in XServe 3,1 with OS 10.6.8, and 24GB RAM.
Any suggestions?

I do not believe that's
The server they have is in english yes.....
I can not believe!!!
i will try monday and tell you some thing.
Brian can you say one more thing
how do I create a script to insert in the post-install script They have in System Image Utility. "package and post-install script ."
The file need to be in " .sh "??
i can put the welcome message appear to select the portuguese language but i need to login in single user and put the;
/sbin/fsck -fy
/sbin/mount -uw /
touch /var/db/.RunLanguageChooserToo
Shutdown -h now
And works.
if i can put this in the installation process i thing it will will work.?
Thanks again for your help

Create image of audio CD?

Hi there,
I'm still new to Mac and have learned a great deal of new stuff over the last few weeks - including some great information found here in this forum.
Most issues have been pretty minor and were resolved more easily than I thought. So far a good experience for my needs.
I'm stuck with two issues. This is one of them:
I occasionally need to create audio CDs, then generate some sort of an image file of that CD, and then ftp it to other people's server. Those people are Windows based and need to take those image files and burn regular audio CDs again. Sounds simple enough and we've been doing this with Nero easily before. Only Nero is not available for Mac.
And just to get it out of the way: yes, I do own the copyrights for the content. And no, CDs are not dead (yet) and simple moving stuff to MP3 or other formats is not an option in this case.
So what is the easiest way so that I can have an image file that works on both Mac and Win? I'm willing to buy a piece of software on the Mac side but not for the Win counterparts. So ideally I need to create something that Nero or any of the free tools for Win can burn to audio CD again.
Just learned that .iso is not an option for audio CDs. Never knew that. So the way the app "Burn" does it seems not to work in my scenario.
Thanks

dhort,
You are confusing me as well.
What do you think a PC-user could do with a .CDR-image in HFS+ format?
And what a Macuser should do with this file too?
I think anamorphis wanted to offer a format what can be used to burn it directly as Audio-CD;
PC-user could burn bin/cue-files for example with Nero directly as Audio-CDs.
For Macusers are also a lot of applications like Toast or maybe LiquidCD for burning this image as Audio-CD.
Sure, as Macuser you could copy the Audio-files from .CDR-image into iTunes or burn-apps, but thats not the smart way.

Creating Image Files

Is it possible in Tiger to create image files that are readable on a PC using Disk Utility? I a trying to copy my Canon software as a backup that can be used on both my Mac and PC. Disk Utility creates a .CDR file but I don't think that is compatible.

          but if you wanted to:
          http://www.acknowledge.co.uk/snippets/java/code_examples/servlets/writetoate
          mporaryfile.html
          "Bob Lee" <[email protected]> wrote in message
          news:[email protected]..
          > If you're dynamically creating it, there may be no need to write it to a
          > file at all. You could just dynamically generate it and send it straight
          to
          > the client. Then you wouldn't have to worry about the cleanup either.
          >
          > Bob
          >
          >
          > "Mike Voltin" <[email protected]> wrote in message
          > news:[email protected]..
          > > I am dynamically creating an image file from within a servlet based
          > > upon user selections. Where is the best location to save these jpg's.
          > > I will have an img tag, <img src=theLocationAndNameOfTheImageFile>,
          > > in the HTML that I am generating.
          > >
          > > Also, what's the best way to remove these image files so that they are
          > > cleaned up properly.
          > >
          > > Thanks.
          > >
          > > Mike V.
          >
          >

Satellite M105-s3064: Need software to create image of my fingerprint

Similar Messages

Maybe you are looking for