Satellite M115-S3154 will not start Windows XP

Opened new post per Jerry concerning my 3yr old Satellite: M115-S3154 w/ Windows XP Media Ctr Ed 2005
Yesterday upon start up, I immediately rec'd message stating:
- "windows did not start successfully - recent hardware or software changes might have caused this"
- it gave options to restart in the 3 different Safe Modes, last known configuration and start normally - none of these worked. I've tried numerous times yesterday and today with absolutely no luck.
When I shut laptop down 2nites ago, it seemed like it shut down extremely fast?! Today I realized that battery yellow light was on and thought maybe it wasn't charged enough. Charged for over 2hrs, have a blue light, but still had same experience as above.
- I removed and replaced battery - no luck
- I removed and replaced HDD - no luck
I just now, followed your advice on pressing F8 immediately after start - however, there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop - what I do have is
= the 3 different Safe modes - tried all these, no help
= Enable Boot Logging - tried this, no help
= Enable VGA Mode
= Last Known Good Configuration... - tried this, no help
= Directory Services Restore Mode (Windows domain controllers only) - tried this, no help
= Debugging Mode -    tried this, no help
= Disable automatic restart on system failure
= Start Windows Normally - tried this, no help
= Reboot - tried this, no help
= Return to OS Choices Menu
I attempted the Microsoft Knowledge Base article suggested by Jerry -
Advanced troubleshooting for general startup problems in Windows XP - but no help.
I also tried MS article 310353 - How to configure WinXP to start in a "clean boot", but under Method 1, the downloadable guided help would not run on this computer i'm using to figure out the Toshiba problem. Method 2 of this guide requires you to be able to open windows - pretty dumb since I can't get windows to run in first place! So I'm still stuck.
I do have the original Toshiba Recovery and Applications CD - I have many files and pics that I do not want to lose.
thanks roo

Satellite M115-S3154  
there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop
That was for the Windows Vista thread you jumped in to.
= Disable automatic restart on system failure
Did you try this one? Instead of a reboot, it should give you a blue screen with the STOP error and possibly the file responsible. We could use that information.
Ihave many files and pics that I do not want to lose.
If the hard drive is still okay (there's no reason so far to doubt that), we should be able to rescue the files.
One way is to put the hard drive in an enclosure and plug that into another computer.
You can also make a bootable CD with tools. Let us know.
-Jerry

Similar Messages

  • WDS service will not start Windows Server 2012 R2 with Update

    Greetings,
    After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
    Any suggestions?  Am I missing a Win-PE boot Image?  Should I do something else?
    Please assist,
    Bob Hessenauer

    All,
    The problem was a conflict between DHCP and WDS.  Followed the instructions in this article and all is now fine:
    https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
    Just so you know,
    Bob Hessenauer

  • Toshiba Satellite A305-S6872 Will not start up

    I have the above mentioned computer and it is 2 years old. Last year in January the hard drive crashed and had to have new one installed at Best Buy. Now it will not start up. When I turn it on the Toshiba screen displays with F2 and F12 options. Then the creen goes black and the following displays:
    Intel UNDI, PXE-2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation
    For realtek RTL8101E/8102E PCI-E Ethernet Controller v1.07 (080320)
    PXE-E61: <edia test failure, check cable
    PXE-MOF: Exiting PXE ROM
    No bootable device -- insert boot disk and press any key
    I insert the recovery CD and it says windows loading files then has a screen that says Selecting a Process: Toshiba Recovery Wizard or System Recovery Options. I choose System Recover Options and then choose English language and US keyboard layout. Then the following screen comes up: Select an operating system to repair .... If you do not see your operating system listed click Load Drivers to load drivers for your hard disks. When I choose Load Drivers I do not know where to find the OS driver. When I click Next and choose Startup Repair it says it is unable to fix the problem automatically.
    I don't want to choose Toshiba recover Wizard because it says it will erase everything. Does anyone have any suggestions on how to fix this problem? 

    The exact same thing happened to me yesterday Feb 5!!!
    During normal use of windows 7 the computer crashed and went through the same boot procedure as described by the previous poster.
    Now I can't do anything with my hard drive. I tired everything. I even tried restoring it from the backup image that I have, but it said that it cannot find hard drive!
    I do not have Toshiba Recovery. Can I download it from somewhere?
    Does anyone have any suggestions? After booting from Win 7 Recovery Disk, I even tried fixing the MBR and partitions, but I would always get an error message that the system doesn't support the software I tried using (guessing because it's 64bit?)
    Please, any suggestion is most welcome and appreciated!!!
    Thanks,
    Djape

  • Satellite A105 Reboot, will not start up

    Hi....
    Laptop belongs to my wife and this morning I am told that it will not start up.
    Problem is .... Begins to start and shows symptoms of previous post by tommy1980murf.
    Quick flash of a blue screen with text, then moves onto options for Safe Start, Safe network start ...etc...
    No matter which optoin is chosen the laptop goes through the process bringing up the Windows XP logo then abruptly shuts down almost like a reboot. Process automatically starts over again and again.
    Options on immediate power up are F2 and F12.
    Does anyone have any advice to offer?
    Thanks in advance for your help ...Andy

    WIll it boot into Safe Mode?  If so right click on the My Computer Icon and select Properties.  Click on the Advanced Tab, then the Setting sbutton by Startup and Recovery.  Now make sure that the Automatically Restart checkbox is NOT checked then OK your way out.  Now when the blue screen appears the system will stop giving you a chance to read it and tell us EXACTLY what it says.  Not something like, EXACTLY WORD FOR WORD.  The lines you will be needing to post will be the ones in this picture http://www.pcstats.com/articleimages/200409/BSOD_2​.gif that state:
    STOP: and a string of NUMBERS (they are zeros not letter O's)
    and the
    Driver_IRQL_NOT_LESS_OR_EQUAL line.
    Also look to see if they list any specific driver, file, or program.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • New Satellite Pro L300 will not start up or operate

    My new laptop will not start operating.  I have done everything by the book in regard to installation, but once it asks for my user name and password, it goes to a page where it says "Preparing your system".  Then after about 10 mins it goes back to the sign in page with my user name and password, and repeats the whole thing.  
    How do I fix this?  The laptop was bought new from ebay as a gift.

    Getting a DOA is so random that it probably won't matter when you place your order. Right out of the box,the machine should start up instantly when you press the power button. Yours doesn't.
    It sounds like it arrived with a dead battery and the power adaptor is not charging the battery. Even so, it should start up from the power adaptor alone. It could be that the power adaptor is not being recognized.
    If you still have it, you could try resetting the SMC, which could possibly get things working again:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    Your satisfaction is important to Apple. If your machine has problems out of the box, they would rather give you a replacement immediately than to mess around with one which obviously has a problem of some sort. The one you return will go to the repair depot and the problem will be found and repaired if possible. Then it goes to the online store and is sold as a refurbished machine.
    A power issue like yours may be simple to fix, or it may not be. The last thing you want to do with an expensive brand new machine is to find out it is defective in some way and have to send it off for repair. You would much rather just give back the defective machine and get another one that is not defective, and I think Apple realizes this.
    There's really no reason to wait before submitting a new order--you can do it at your convenience.
    Good luck!

  • Satellite L450D-13U will not start at all

    Yesterday the screen on my L450D when blank and then the machine closed down.
    Now it will not start at all.
    There are no lights on display when the power cable is attached.
    When the start button is pressed all that happens is there is a momentary flash of the On light (not sure if that's the right name) and the DVD light.
    You can also hear the fan starting up but that immediately goes off.
    That's all that happens.
    I've tried without the battery, tried discharging the battery.
    Has my laptop just died?
    Is there any hope or should I just move on?

    I will agree with checking your RAM.
    The best way to do so before you buy anything is to check each stick.
    Remove the battery and AC cord, and press the power button several times to make sure the system is fully discharged.
    Once it is discharged, ground yourself and pull the RAM cover. Remove the top stick ONLY. Plug the laptop back in, and try to boot it.
    If you get nothing, swap the stick you pulled for the one that is still in the system, and try again.
    After that, if it still does not want to boot up, take it to a shop. It could be something as simple as the BIOS battery being dead, or a burnt out power mosfet.

  • Foxfire will not start. windows 7 home premium

    After downloading and installing FoxFire, and pinning the icon to the taskbar, it will not open when it is selected. I can double-click the icon on the desktop, in the taskbar, or under the start button, all that happens is the spinning circle appears with the mouse pointer for a few seconds, then disappears. The program does not open, nor does it appear in the task manager list of running applications. If it won't open, I can't use it, rendering it useless.

    hello BobLewis, as such a problem can sometimes be caused by malware that is active on the system, i'd recommend to run a scan with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan].

  • Satellite L655D-S5050 will not start

    Hello! I have owned my Satellite L655D-S5050 for a little over a year, and this is the first major problem it has given me.  I'll try to explain as best as I can. A few days ago, I was using my computer as I usually do, and closed the lid when I was finished using it. I have my computer set up to hibernate when I close the lid. I came back about 20 minutes later, and found that my computer was still on, but the screen was blank. I tried several different things, but I eventually had to do a hard reboot. When I rebooted the computer, the screen remained blank and the fan ran at full speed. The BIOS screen never appeared, and Windows never started. The HDD access light never lit up, and I could not hear any HDD activity occurring. I tried pressing CTRL+ALT+DEL to reboot, but it didn't do anything. I had to do another hard reboot. After pressing the power button again, the same thing happened, and it happens every time I try to start the computer. This is where I am currently at. Has anyone else experienced this before? Anybody have any possible fixes? Thanks in advance!!

    I just got my computer to start up!!  What I did was similar to the "towel trick". I turned on the computer, closed the lid, and then covered the computer with my bed's comforter. After about an hour or so, I noticed that the fan was no longer running full-speed, but was still running. I held down the power button to turn off the computer, then pressed it again to turn it on, and was greeted by the Toshiba logo! After trying (and failing) a startup repair, Windows is now running as it should.  I am now pretty sure that this is being caused by a hardware failure. Based on what I've heard from a few other Toshiba Satellite owners, this appears to be the result of the solder joints on the southbridge failing, and therefore breaking the connection between the southbridge chip and the motherboard. I truly hope Toshiba looks into this, and if it is found to be a manufacturing defect, will respond properly.  Anyway, I am sure that this will happen again in the future, but for now I can use my computer again! I'll let you all know what happens.  EDIT:I tried restarting the computer, and it once again failed to start. After the towel trick, I got it running again, and am currently using my computer! It is obvious that this is just a temporary fix, but it's better than nothing.

  • Itunes will not start windows 7

    trying to install itunes onto a friends brand new windows 7 computer.  Did all windows updates (all manditory ones) and then installed quicktime, then itunes.  When you click on itunes nothing happens, you get about 1/2 a second of the spinning circle and then nothing.
    Holding ctrl/shift you get the message about starting in safe mode, then after hitting OK it goes away and nothing happens.
    In task manager once you click it you can see the processes come up, but nothing ever comes on the screen/leads you to believe it is started. 
    After all of this I tried pulling the partition and once again reinstalling vanilla windows 7, no luck.  Uninstalled everything that says apple on it and did a full windows update, reinstalled itunes, same thing.
    I am at a total loss.  Tried installing it on my personal PC and it goes perfectly, starts right up.

    i have this problem
    Itunes is a total joke

  • Satellite P105-S9337 will not start

    I just had a customer bring in a Satellite P105-S9337 laptop. She said that at one point she did a system restore and then someone called her and they did something in her system - details are pretty sketchy there. Anyway, when I got it, I tried to boot it up, there are no beep codes; there is no flicker of video. I have tried to boot with the hard drive in; hard drive out; with a boot CD, without; reseated the memory modules; put a different hard drive in but still no video. I even tried hooking it to an external display - no video. I know in a desktop, I would look at the video card and/or mother board - any other thoughts on this?? Thanks.

    Satellite P105-S9337
    Just try a system reset and see if that makes any difference. Power off the computer, unplug the AC from laptop, remove battery, press and hold down the power button for 30 seconds, replace battery and AC, power on, if/when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, and try to reboot into Windows.
    Please let us know if it makes any difference. Good luck.
    Mike

  • InDesign CS5 will not start Windows XP Pro

    Error message
    InDesign.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
    Error Signature
    AppName: indesign.exe AppVer: 7.0.3.535 ModName: objectmodel.dll
    ModVer: 7.0.3.535 Offset: 0001625c
    My Indesign was working fine until about 3 weeks ago when it started crashing when exporting a pdf. For one day last week that seemed to resolve itself, then just yesterday I cannot open the program at all.
    I am going to check conflicts, any advice?

    Start by replacing your prefs. See Replace Your Preferences
    If that doewsn't work, try a System Restore to a point before the crash (probably won't work), and then a "Repair" from the original installer. If nothing works, it's time to uninstall and reinstall.

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

    I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions?  It worked perfectly fine on my old computer which was windows 7.0

    Hey,
    I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
    For better understanding, please refer this kb file:
    Compatible web browsers and PDFMaker applications
    Regards,
    Anubha

  • ITunes will not start up... Keeps giving Windows Error Message.... help!!

    My Itunes will not start at all... When I try to start it I get a Windows Error Message saying below:
    *iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.*
    *In the Error Window The following is there...*
    _AppName: itunes.exe AppVer: 8.0.1.11 ModName: quicktime.qts_
    _ModVer: 7.55.90.70 Offset: 00990007_
    Can Anyone help me as I can’t use my ITUNEs and am Handicapped when it comes transferring ITEM on and OFF my IPHONE...
    Thanks

    That error suggests you may have a QUicktime problem rather than an iTunes problem.
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
    If so uninstall them. They are bad news for Quicktime.
    Then download the version of Quickime without iTunes:
    http://www.apple.com/quicktime/download/win.html
    Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
    Restart you computer
    Install the stand alone Quicktime and check if it starts.
    If it does you are in a position to find out if iTunes is OK.

  • Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing.  Then another box indicates "Error 7 (Windows error 126).  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing".  Then another box indicates "Error 7 (Windows error 126)".  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Maybe you are looking for

  • Read Data from "virtual" Cube with different ConsUnit Hier. Version

    Dear all, I got a odd request. I need to load data from the virutal Reporting-Bapi Cube for a certain Data Version. This Version has been attached to a new consUnit Hierachy a few weeks ago. Now we get a request to read data in the past for units whi

  • Unable to access Internal HTTPS through VPN conn

    Anytime I have internal websites with HTTPS connections that do not have valid certificates, our VPN users are unable to make a connection. The wireshark trace shows acknowlegement number = broken TCP.  I have run Packet Tracer and it shows a problem

  • Problems centralizing windows on dual monitor

    Hi all, every time I create a JFrame on my aplication, I use the method setLocationRelativeTo trying to centralize it. I used to pass null to this method every time I call it, but recently I got a dual monitor and discovered that passing null to it m

  • Crash when saving to second server

    Hello, This is a problem that is "recent" but I can NOT pin point when it started. I'm not aware of any specific update or newly added software that may have caused the problem. While at work, Ethernet plugged into system, I work in PhotoShop with jp

  • Photoshop Elements 11 cannot find Qtcore4.dll

    Photoshop Elements 11 cannot find Qtcore4.dll. I have removed the program and re-installed twice and have run sfc/scannow. I still get the error on starting the program. A web search does not give any definite answers