Satellite M200 monitor turns Off after boot & battery won't charge

Hello, I'm from Jakarta, Indonesia
I have a problem with my Toshiba Satellite M200 Notebook (Running Windows 7 Home Premium)
after i press the power button to power up my notebook, It works fine showing BIOS and Windows Boot Screen,
but after that my monitor just suddenly turn off when Windows supposed to show login screen.
sometimes the monitor don't turn off, but shows lower resolution (i don't know exactly what resolution, maybe 1024x768 or 800x600, i'm using 1280x800)
so the only thing i can do is press the power button again to shutdown improperly then press the power again to power up, my monitor works normally
try to shutdown then power up again in couple hours later, the problems comes again.
from the moment i install Windows 7, i use 8.15.10.1930 driver version (downloaded from Intel Download Center, which included Intel TV Wizard)
2 days ago my friend said that i should install the driver from Toshiba's support site, so i went to csd.toshiba.com and download the 8.15.10.1825 version from that site (which not included Intel TV Wizard )
my monitor works normally after I installed the driver i've got from csd.toshiba.com, so i think that the problem because Intel TV Wizard somehow messed up with my notebook. But this morning this problem comes again, my monitor just turns off suddenly ..
besides this problem my battery seems like failed to recharge, Windows shows my battery has fully charged, but when i plugged out my AC adapter,
it just remains for 15-20 minutes before my notebook shut down automatically
three months ago i just brought my notebook to local Toshiba Service Center and bought new motherboard to replace my old mobo (which have a VGA issue too!)
there's something i can do (related to Windows or software/driver) or i have to bring my notebook to the service center again?
are they somehow make a wrong wiring when replacing my motherboard?
and am i have to replace my battery pack too?
i've been using this notebook for about a year and half and there's nothing wrong with my battery before replacing the motherboard
any help would be appreciated :D

well, i can't find my model's driver in Toshiba Europe site,
in Satellite M series it only shows M100 and M70 and not including M200
i found http://pc.toshiba-asia.com which covering my region. after choosing my product they give me link to download Windows 7 driver, here's the link
http://support.toshiba-tie.co.jp/windows7/download/Satellite_M200_32_sp.htm
Windows7 Driver | Intel Display Driver | 8.15.10.1825
they have the same driver version (and same size too) with my current driver i've got from csd.toshiba.com
any other ideas besides the driver issue ?

Similar Messages

Monitor turns off after boot? macmini

I have a strange display issue.
I am running a dual monitor setup on my 2010 mac mini. It used to work fine but now suddenly the monitor using the minidisplayport won't work right. It just stays turned off.
If I unplug the HDMI monitor and only use the minidisplayport, the connected monitor turns on while the computer boots (grey apple screen), but instead of eventually showing my desktop the monitor just turns off. The computer acts as if nothing is wrong. If i switch the monitor to the hdmi everything looks normal.
Resetting pram makes no difference.
Starting in safemode makes no difference. no picture.
Apple hardware test shows no issue. (The weird thing is, AHT has no problem keeping the minidisplayport -monitor running)

Only the Hdmi monitor shows in systems pref/displays. Ofcause i dont know if anything is going on on the black screen. There is no arrange displays option though.
I only have bad experience contacting apple, so that will be my last option. I have no apple store near by. The mini is still under waranty, but i also think/hope it is just a software issue.

Monitor turns off after upgrade[SOLVED]

I installed arch on my other notebook just now and after I upgraded and booted up the monitor turns off right when UDev is trying to start. Anyone had this problem yet? I have no idea what`s going on and how to fix this.
Last edited by Danieldev (2010-06-11 17:05:03)

udev is a good hint - if I were you I'd check the udev wiki page and go from there

Satellite M60/M55: Turns off after disconnecting power

Reposting because the original threads are locked.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15285&messageID=55746
My M60 sometimes turns off immediately after unplugging mains power (either the AC mains or DC plug from the laptop), instead of resuming on battery power, although the battery is full.
The battery is OK & the laptop starts up regularly on battery power after pushing the on switch.
The Toshiba Power Saver seems to work OK & I have the latest BIOS.
I always save my work before disconnecting, but I still don't like this behavior & would appreciate some good advice.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19092
Satellite M55 turns off when disconnecting power cable when disconnecting my laptop from the outlet rather than switching to the battery, my laptop will often simply turn off even though the battery is completely charged. Other times things work as they should.
I had the motherboard replaced for another reason and was fairly surprised to notice the problem after replacement (but without OS reinstall).
The main suspect is the TPS and its driver; some months ago a new version was released on Toshiba support site for M60 (though the file dates are not fresh, and I believe I have installed this version earlier).
So, I removed both TPS and TPS driver. I tested many times and it did not happen again. Not even when I reinstalled them.
While testing I turned off HD write caching to avoid file corruption problems (but this slows down HD operation, most notably hibernation).
I'm not sure if this actually works because also earlier the computer would shut down just occasionally, not every time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the outcome is.

What to say dude. The problem is that this issue happens ONLY sometimes and therefore its not easy to locate the real reason for such shutdowns.
However, I would try to provide some useful hints but first of all it would be useful to know how old your battery is.
Fact is that old and stressed batteries lose the own performance very quickly.
My battery is about 3 years old and my notebook would run on the battery for about 10-20 seconds even though its fully charged. The performance is simple very weak!
At the other hand the issue could be related to the faulty power supply electronic on the board
As you see its not easy to say whats exactly wrong and as already suggested in the other threads (locked) you should ask a technician for a notebook check.
The guys could run some diagnostic tests and could locate fault.
Best regards

Pc turns off after booting on

I am running windows xp ,Barebone MSI 8SI 865 GM2 machine with 2.4 ghz processor .If I start the P.C. by pushing the button on the front of the machine it takes 2 minutes to boot up to the widows come page. After 3 minutes Machine turn off the mains power.
thanks for any help

I agree with stu on this one, sounds like an overheating issue, can you post some further details ?

Satellite P850 display turns off after only minute or two of inactivity

Hi,
I have my Display settings set to turn off display after 1 hour when on power and 10 minutes when on battery.
I have a screen saver set up to go on after 10 minutes.
However, my display often (but not always) turns itself off after only a minute or two of inactivity.
Can anyone explain this weird behavior?
It starts up immediately I move the mouse but I just don't like things happening that I haven't scheduled.
Thanks.
Hoges

Hi
Could it be possible that you changed the settings in the power profile which is not in use?
I mean in case another application like ECO Utility would control the display brightness, the changes in Windows power plant would be useless.
Toshiba ECO Utility for example contains some settings like dim display after
I think you should check this utility

Satellite A660-1EV turns off after 10min of gaming

I have problem with my cooling system.
The problem is that I run a game (FIFA 12) and after 10 minutes the laptop is turned off ... A while ago I sent it for repair from the place you bought it that I burn cooling and then the problem was gone .... Descriptions .. problem comes up after replacement of its cooling

hello, I was having the same problem with my A665-14F and I took it to Toshiba Authorized Service even though my warranty was expired. In exchange of some price they cleaned the dirt that was blocking the cooler (fan) to work properly and that solved my problem. I was afraid that the problem was due to some more serious hardware problems like graphic card or motherboard etc.
Message was edited by: ICK

MY MONITOR TURNS OFF AFTER 2 MIN OR SO HP TOUCHSMART 300-1330

MOVING THE MOUSE I GET TO THE LOG IN SCREEN,SCREEN SAVER IS TURNED OFF AND SET TO HIGH PERFORMANCE ??

I would start by opening the power options, selecting change plan setting, and then select change advanced power settings. There are a lot of setting that can be managed from this location. I hope this will work for you.
I am an HP Employee.
Jonathan

My mac turns off when the battery reach full charge, what's wrong?

It was working all right, but
after a trip, the Mac didn't start, when i try to start the mac only with the battery,
Started normally, i worked that way for a few moments, then i start to charge the battery,
a soon the battery reached full charge the mac turns off and i couldn't restarted.
Again i try only with only the battery, everything was normal again.

Hi irebecca16,
Thanks for visiting Apple Support Communities.
You may find this article useful for troubleshooting your battery issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy

Touchpad not responding. Cannot shutdown since I can't swipe to turn off. It also won't charge. Help!

iPhone 5s Stopped responding right after I finished a call. Touchpad doesn't respond and I cant shut down since I can't swipe to turn off. I updated to latest OS 8.1.3 a few days ago but it worked fine until now. I tried charging but it isn't responding to that either.

Thanks. I forgot to hold them longer. Is this because of the software update?
it still doesn't show that it is charging though. I Hope that fixes itself. Now my IPad is acting up. I think I'll reset that too!

My iPhone 4s won't turn on and the battery won't charge

Hello,my iPhone 4s battery has been completely drained and when I try to charge it, it shows the screen telling you to plug in the charger (even though the charger IS plugged in) Is something wrong?

Sorry, but we can't help you with problems occurring after you have opened and tried to fix some hardware of the phone, due to the Terms of Use of these discussions.
The warranty for the phone is gone now and Apple will not service the phone either anymore. You'll have to look for a 3rd party repair center to get that fixed.

Iphone turns off after a few mn of utilization with the battery full

My iphone 3GS turns off after the battery is fully regenerated. I can only use it a few minutes before it turns off. I have to plug it again to turn it on, and the indicator of charge is around 98 %. The problem does not come from the battery. Has anybody found the same dis-functioning? A solution? Thanks!

More than likely the iPhone has a hardware problem.
If there is an Apple store nearby, make an appointment to have this confirmed.

Monitor turns off at high resolution

Hi there,
I attached an external monitor via displayport to my lenovo x230 (Intel HD4000).
If I set the resolution to be 1920x1080 (or lower) everything runs fine. If I switch to the monitors native resolution (1920x1200) the monitor turns off after about 1 minute. The monitor tries to turn on again for two to three times, but only for few seconds.
If I dual boot to windows the monitor is running fine.
Any idea what might be the cause and how to fix it?
Thanks a lot

Config xorg, driver installed .... pick up the crystal ball and your answer in my thinkpad t430u (hd4000) with intel-dri, run perfect at 2560x.. or just the monitor is failing because raisins resolution supporting, i don't no. luck

Monitor turns off randomly?

My monitor turns off after a seemingly random amount of idle time. Messing with DPMS in either /etc/X11/xorg.conf or doing things with xset in the terminal seems to do absolutely nothing...please help! ^_^

Sorry, me=noob
Arch x86
New install from about a week ago, problem started either late wednesday or early yesterday
ATI Radeon 7000 with OSS ati driver
Old card, old (CRT) monitor
Gnome
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "StandbyTime" "15"
Option "SuspendTime" "30"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "record"
Load "glx"
Load "extmod"
Load "dri"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL E773c"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

Can not turn on the monitor on Satellite after dispaly turns off after 10min

hi..
I have a problem with my laptop..
when the display turns off after 10 minutes , it doesn't turn on again !!
i move the mouse, trying to type on the keyboard, but it doesn't work..
to turn the display on again i should close the lid to hibernate and open it again!!
i hope that you will help me @_@ !

Hello
Check please http://support.microsoft.com/kb/917332/en-us
To correct the behavior please download and apply the patch (KB917332) which could be found in the detailed resolution below. I hope it will help.

Satellite M200 monitor turns Off after boot & battery won't charge

Similar Messages

Maybe you are looking for