Satellite M300 with Win 7 64 wont register bluetooth mouse

I have just updated my M300 to Win 7 64 and can't get MS Bluetooth Notebook Mouse 5000 to register. I have updated the BIOS and drivers. Any suggestions would be gratefully received. It worked perfectly on this computer with Win 7 32.
Thanks in advance.

Akuma is right.
You need the Toshiba Bluetooth stack!
Reinstall the BT stack and enable BT using the FN + F8
Note; the FN+F8 controls the WLan too. You need to press this key combination several times in order to get BT enabled.

Similar Messages

Satellite U200 with Win XP - Display device change utility is not working

Hi there,
I reckon there's nothing wrong with his installation since I experience the same problem.
Fresh install of win XP on a U200 satellite Pro.
WXP updated to sp3 straight away. Then downloaded all drivers baseD en serial number from toshiba website, then installed them in the same order as advised on the installation list but I get the same error installation message as sjoemie1 when I tried to install "hotkey for display device" etc.
ANYONE KNOW HOW TO REINSTALL THOSE TWO FILES?

Hi
The Common Modules v6.05.00 for Win XP needs to be installed firstly.
Furthermore there are two tools called
*Hotkey Utilities for Display Devices v3.4.4.1-XP*
and
*Display Device Change v2.3.0.0*
Both software part allows you to switch the display device from LCD to LCD+CRT or CRT mode by pressing Fn+F5
So if you have any problems installing the first utility, forget this and try the second one.

Satellite Z930 with Win 8 - How to enable virtualization?

Dear Support,
I bought yesterday a Toshiba Satellite Z930/01E with 3rd Generation Intel ULV Core i5-3337u 1.8 GHz - 2.7 GHz
The hardware is beautiful but the software windows 8 basic is a piece of rubish, I'm a heavy computer user I need to run several virtual machines in my current laptop a dell xps 15 in a normal day I have 2 windows xp + linux + windows 7,
I spent my day yesterday trying to get working virtualbox or vmware player on windows 8 on this laptop
and it doesn't work at all, can anyone please tell me if you are using any virtualization software on this laptop ?and if you are what is the trick ??
How do we enable virtualization on this laptop ??
Please help I'm considering in returning this latop and get instead a mac, I got enough issues with windows just to run such a basic application.
Thanks
Ivan
Message was edited by: ivanoch79nnn\

After restarting the pc several times change every single paramenter in the bios and restore to factory defaults
its working now thanks for nothing.

Control buttons don't work on Satellite A300 with Win XP

Hi,
I bought a new Toshiba A300-1MX a few days ago.
I had windows XP installed. Service Pack 3. BIOS is version 1.50 (says so in the BIOS).
The problem: My shiny media keys dont work. They just dont respond.
Anyone with any suggestions?
I have downloaded the commute models models driver for XP plus the hotkey utility for XP, and after installing it the FN keys (ESC, F1-5-6-7-10-11) work (altho the F2,3,4,8,9,12 dont work).
Thanks people.
Sascha

Because the A300-1MX belongs to the PSAGCE series you have to choose and download the XP drivers for this model.
I checked the Toshiba driver page and there is a BIOS 1.40 only. So dont understand why you talk about 1.50 Bios.
Secondly the Toshiba media buttons will function if you would install the Toshiba Controls utility from the page.
Last but not least you need Common Modules to get the FN buttons working.
The single FN buttons like F9 for example need a additional tool like Touch Pad On/Off Utility
The Fn F2 or FN F3 will work if a Power Saver has been installed and hibernation has been enabled.
So as you see you need further tools!

"PC health monitor driver" on Satellite L750D with Win 8 not working

Hi,
I use a Toshiba laptop (model: Satellite L750D psk4ye).
Yesterday I upgrade this Windows 7 to Windows 8 pro (32 bit).
I installed some driver but when I try to setup pc health monitor driver in my computer it is not working.
I try one more time but failed again.
Ive download again this driver from
www.toshiba.eu/innovation/download_drivers_bios.jsp but its not working.
Now what can I do. Please help me..........

Hi
Try to download the PC health monitor released for newer models like for example Satellite L870.
As far as I know it should be possible to install such tool since the health monitor isnt model specific tool.

Satellite P850 with Win 8.1 - Hercules rmx dj controller not working

Since installing windows 8.1 on my P850, I have been unable do use my Hercules dj rmx controller.
The support team at Hercules state that the issue is the usb 3.0 eXtensible Host Controller entry and recommend going to the link and follow the instructions there for updating the relevant drivers, as this is a power management issue from the upgrade.
They haven't solved my problem so they said talk to my pc manufacturer.
Can any body help or had this problem.
+Message was edited: dead link has been removed+

Hi
The USB 3.0 eXtensible Host Controller is developed and designed by Intel.
The point is that Intel provided the own drivers only for Windows 7.
Why? Because the Windows 8 and Windows 8.1 use already native in-box USB 3.0 driver
+Source:+
http://www.intel.com/support/chipsets/usb3/sb/CS-033977.htm
So if Hercules support means, its a compatibility problem between the Dj controller and the USB controller, they should provide an fix for that because Intel does not provide any special driver updates for the USB 3.0 eXtensible Host Controller
By the way: this is an user-to-user community

Satellite C50D with Win 8.1 - screen printing

I have a C50d which is running windows 8.1. Im trying to screen print and following the suggest keys which is windows key and the PRTSC and nothing happens.
Any suggestion?

To print the screen you have to press PRTSC button.
Now open an pic edit software like Paint and press CTRL + V to paste the screenshot.
More details here: [Take a screen capture (print your screen)|http://windows.microsoft.com/en-US/windows/take-screen-capture-print-screen#take-screen-capture-print-screen=windows-8]

Lennovo T60 with Win 8.1 Pro: Bluetooth not working

Hi,
I have a T60 with win 8.1 pro. Bluetooth menu doesnt show up in device manager or under the PC and Devices.
Please help to get the bluetooth menu on PC, I need to connect a microsoft bluetooth mouse.
Thanks
Sal

Hi om prakashfrombangalore,
Welcome to the Apple Support Communities!
I understand that you are having an issue where Bluetooth on your iPhone is not working as expected. In this situation, I would recommend reading over and working through the troubleshooting steps provided in the attached article.
iOS: Troubleshooting Bluetooth connections - Apple Support
Best regards,
Joe

Satellite M300: speach recognition works only with external usb hub

Hi All
I have the Satellite M300 which I was able to operate the speach recognition program prior to having the motherboard replaced due to the usb's failing.
I have found using the headset I cannot achieve high enough quality to operate it.
The only way I can operate the speach program is use an external usb hub with its own power supply.
Would the problem relate to the audio card or just simply not enough voltage?
And is there na fix?
Cheers
Craig

Hi
The notebooks USB ports provide a standard power of 500mA.
As I said this is a standard but in different cases the external 3rd party USB devices need more power.
For example one of my external USB 2.5 HDDs must be connected to two USB ports at the same time to ensure that the HDD would get enough power to work properly.
Your external card is not known to me but possibly it needs more power as usual.
Greets

Re: Satellite Z30-A with Win 8.1 - Driver update confusion

Hello,
I have a question regarding driver updates. Currently, Windows Update recommends me to update the audio driver (important) and the LAN driver (optional). Toshiba Service Station, however, doesnt offer new drivers for these devices.
My question is whether I should install these updates (particularly the important one) or if they are not approved by Toshiba yet?
Moreover, does anyone have a changelog for the new 3.8 Bios?
Thanks!

Thanks for the quick replies! I was just tempted because one of the updates was classified as "important", for whatever reason, which are normally those updates that should be installed (e.g. for security reasons). In fact you are right, I dont have any problems with my laptop.
Sorry, forgot to state the model: Z30-A with Win 8.1
Any ideas about the bios update?
Thanks!

Satellite m300 won't boot! please help!

Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
Min

Quote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare.

Satellite M100-126 - Win 7 32bit indicates "only" 3GB of usable memory

Hi,
Here's the situation:
I have a Toshiba satellite M100-126 (PSMA1E - 0PV021FR) running Windows 7 32bit.
It originally had 2gigs of Ram, but after my brother's laptop broke down (motherboard failure) I took his 2x2gig ram and installed them in my laptop.
At first, the BIOS only detected 3gig, so I flashed the bios using the one recommended by Toshiba Download center, i.e. v 3.0 , direct link http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=66238 (if it works). There is also a version 5.6, only for Windows Vista, but I did not use that one.
So now, the bios detects 4gigs, and so does Windows, but windows indicates "only" 3gigs of usable memory.
In Windows resource allocation, 1gig is "hardware reserved", so it's 3gig usable memory. If I replace one of the 2gig modules by a 1gig module, I get only 2mb of hardware reserved, and the 3 installed gigs of memory are usable...
Here are the questions, now:
I am aware of the memory limit for 32bit systems, and that I won't be able to use the full 4gigs anyway, but my brother got 3.5 gigs of usable memory on his 32bit system... Is it

Thanks for the answer, 3.2gigs then, must have understood the little bro wrong.. :-)
Yet, under Windows, in resource allocation, the memory used by the video card is indicated as similar whether I install 4 or 3 gigs of memory...
Oh well, not a big loss, when I find the time I'll run benchmark tests with both installs and see if there's a difference.
Any idea on whether I'd gain anything with Win 7 64bits or would it just be wasted on a 3y old system (Windows indicates it's 64bit compatible)
Thanks!

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Satellite L755 - after Win 8.1 upgrade cannot use FN+F8

Hi Sirs;
After I update my laptop Toshiba Satellite L755 to Windows 8.1 and when I press FN+F8 to off or on the Wi-Fi or Bluetooth it is not working.
I removed VAP then system driver and then functions key utility and re installing it not Success to turn of,
please any advice?

Windows 8.1 does NOT support the Value Added Package anymore!
The VAP was released for Windows Vista, Windows 7 and Windows 8 Upgrade
Notebooks which were preinstalled with Win 8 do not contain VAP anymore!
But the Satellite L755 does not seem to be Win 8.1 supported.
So you will be lucky man if you will get these function buttons working.
I can recommend you to check the Win 8.1 driver released for Satellite L855 series.
Install the Toshiba Function Key Utility and Toshiba System Driver
Maybe it would help

Satellite M300 - DVD Drive Problem

Hi
I have a Satellite M300 and when I insert a DVD movie to watch the DVD drive spins and hums but the disk is not read. The drive stays like this and when I try to eject the disk there is no response at all form the computer.
When I try to eject through windows media player it says the drive is busy, but still nothing happens.
The drive continues to spin and hum loudly without reading the disk and the only way to stop the disk spinning and to eject the DVD is to restart the computer and eject during load up before the computer tries to read the disk again.
I am only a novice at notebooks so any help or suggestion would be greatly appreciated.
Also the computer was purchased in Australia and I am currently living in Germany
Please reply in English
Thanks Daniel

its is a strange problem, it will do it with more so original DVD's, but does happen on occasion with burnt or created disks
with original disks it might happen a few times then on an off chance the disk will be read and works fine, but more so it is not read

Satellite M300 with Win 7 64 wont register bluetooth mouse

Similar Messages

Maybe you are looking for