Satellite M30X-122: How to use headphone and speaker at the same time?

Hi,
is there any possiblity to use the headphone and the speaker at the same time?
When I plug the head phones in the socket, the speaker is swtiched off now.
Thanks
Peter

Hi Peter,
Unfortunately there is no way to use both the headphones and the speakers at the same time. This is because tghere is as physical disconnection of the current to the internal speakers when you plug in the headphones. It is not software controlled. The only way of bypassing this would be to dismantle the headphone socket and permanently solder the connections which are broken when you insert the headphone socket.
regards,

Similar Messages

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Using headphones and speakers at the same time: Audi

I have the audigy. My friend does this with his comp. He plays games through his headphones while his computers mp3 plays through his speakers. Possible with the audigy? If so how do I do this.
I have Vista btw.

bump?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Headphones and Speakers at the same time on ZS 2

Hiya
I have the Audigy 2 ZS sound card.
I have a set of normal speakers with the one connector and a set of headphones that has 2 connectors, one for the mic and one for the headphone speakers. This is also a USB set so i have that option aswell.
Now i know i can put the headphones in the front panel but i dont really want to do this as my pc would mean have the fron panel open.
My question is, how am i able to use both the headphones and speakers at the same time. At this moment if i plug the USB headphones in they take over and no sound comes out of the speakers.
I would like both if poss
Thx
Paul

You can get a stereo splitter adapter/cable and with it, you can have the headphone and speaker connect to the same output jack from the soundcard.
Jason

How to stream Webcam and Desktop at the same time?

Hey Guy,
I just got a little Problem with FMLE... I want to stream live during a Game, but I dont know how to stream Desktop and Webcam at the same time ^^. The streaming Platform i want to use is twitch.tv.. the most common Gamin Platform I think...
I got an IMac i7.
Pls help me I dont get how all these ProGamer do it -.-
Thanks in advance
Kathi

You're going to need additional software or hardware. If you're running a Macintosh, try CamTwist. It's free and allows you to create virtual "cameras" from just about anything you can see on your computer. It's a bit clunky getting used to the interfact and how it works, however.
Hardware solutions (like scanline converters and video switchers) can get pretty expensive. So you may want to go with a piece of software that can handle on-the-fly video compositing/switching. There are two applications that come to mind right off the bat -- and lucky for you, both of them can also output to a live streaming server.
Wirecast is a popular choice, although the pricing starts around $500. It's Macintosh/Windows.
A very popular choice among gamers is XSplit (Windows only) and is a subscription-based model (you pay a small fee by the month, quarter, or year). XSplit has some very impressive compression happening under the hood, and was originally designed for gamers who wanted to share their desktop, XBOX, or PS3 adventures... all while also being able to lay over banners, PIP (picture-in-picture) of themselves, or anythhing else they wanted to clutter the screen with.
If you're running on Windows, give XSplit at shot. It can easily handle your desktop (or most anything else) as a "camera" as well as being able to lay your webcam on top of the desktop feed.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

How to post aquisition and depriciation at the same time

Hi Gurus,
Could you please let me know how to post aquistion and depriciation at the same time.

Hi
What do you mean by postin at a time, is it uploading the balances to SAP
if not there is no question of posting at a time
Thanks
Kameshwar Rao

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

How to use 10 touch points at the same time ?

I want to project game which use about 10 touch points? How can I use all of them at the same time ?
Please give me a sample code.

Firstly you must know how many touch points can accept your device. For example iPad and iPhone can't handle more than 5.
1. Enable touch input mode by
Multitouch.inputMode=MultitouchInputMode.TOUCH_POINT;
2. Use same method as for mouse input but instead use TouchEvent API

How to record midi and audio at the same time?

Hello,
I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
Thank You.

Hi
Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
The audio track must be 'Record Ready':
HTH
CCT

Can WRT54G use WPA and WEP at the same time?

I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
Do I have to buy a 802.11g wireless print server? Or is there another solution?
I don't supposed the linksys router can do both WPA and WEP at the same time?
Connecting the print server to the router with a cable is not feasible. They are on different floors.

both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
 Cheers, Tom

Satellite M30X-122: How to use headphone and speaker at the same time?

Similar Messages

Maybe you are looking for