Satellite M40 - How to reflash BIOS with the same version?

Hey guys been reading the forums trying to find a fix for my problem. After I reformatted hardrive with the original CD everytime you reboot computer the wifi will drop even though the switch is in "on" position and won't come on untill you manually switch off and back on again.
Last time I fixed it by updating BIOS to 1.70 (newest) this time I cant reflash BIOS as it's window based flash and it checks that I already have 1.70. I reinstalled newest drivers and software for everything. I also searche a lot for older BIOS files if anyone mind sending over older 1.60, 1.50, for this computer would be greatrly apriciated it's M40 (PSM40E) it's the model with Nvidia 6600 video card.
Or any idea how I can reflash 1.70 again?
Thanks Daniel

Hi!
Reflashing the BIOS with the same or older version is not possible. Therefore you must go to an authorized service provider.
The technicians can relfash it with the same or older version.
If you dont know where is the nearest ASP you should look on the Toshiba website. There you can search for it.
Bye

Similar Messages

  • SharePoint 365 Deploy App -- "another App with the same version and product ID."

    Hi all
    When I want to deploy App I got this message:
    2>Active Deployment Configuration: Deploy App for SharePoint
    2>  Skipping deployment step because a pre-deployment command is not specified.
    2>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    2>  Install app for SharePoint:
    2>  Uploading the app for SharePoint...
    2>Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.
    If the App exist why it doesn't uninstall it. And also its not possible to Retract:
    Skipping the uninstall step because the app for SharePoint is not installed on the server.
    I solved my problem by changing ProductID manually but I don't want to make the server with dirty small apps.
    Any idea?
    Thanks

    Hi,
    Check the Site URL in project properties to which the app is installed.
    You have to choose the right path first where the app is installed and then Build>Retract.
    Then change the path to new one and try build. It looks like you are trying to retract from wrong Site URL.
    Thanks
    Jashandeep K

  • Cann't open a *.fmb file (with the same version of Form Builder)

    Hello everybody,
    My Form Builder 6.0 cann't open a *.fmb file, created with the same version, even with the same Form Builder tool.
    I worked for long time ago at this module, I saved it many times, I compiled it and it worked very well. But last time it didn't want to work(open). I couldn't open it (FRM-10043: Cannot open file). But the corresponding *.fmx file is working.
    Here is some additional information:
    When I try to rename or replace this file an Windows "There has been a sharing violation. The source or destination file may be in use" error appear. But that file is not in use and it is not shared. Is this helpfull?
    Is there something which can be done?
    Thanks in advance,
    Euge

    Sure. I did that many times. I checked the volume for the errors. I interrupted any share connection. I tried to change the extension of the file and to change it again to *.fmb(I did this on a copy of that file).

  • Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

    I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
    to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
    Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
    per my business requirement.
    The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
    to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
    "Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
    same version and product ID."
    Please assist me anyone. It will be so kind of you.....
    Naveen Kumar
    Steria India Ltd.

    Did you updated the  AppManifest.xml file
    and change the version.
    If this helped you resolve your issue, please mark it Answered

  • I used to drag and drop newly loaded CD's from Recently Added to one of my iPod Classic playlists. I have no idea how to do this with the new version of iTunes. I thought perhaps checking Sync might give me a clue but it warned me Syncing would wipe conte

    I used to drag and drop music loaded from CD's from the Recently Added folder to a Playlist on my iPods Classic. Can't see how to do this with new iTunes version. Probably need to sync somehow but when I checked on Sync it warned me it would wipe out my iPod contents. Don 't know why Apple makes something that used to be simple so difficult. Can't even figure out how to display both my library and iPod contents on same screen.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • How to display data with the same text and key in the drop down list?

    Hi All,
    Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
    REPORT ZTESTING.
    TYPE-POOLS: VRM.
    DATA: NAME  TYPE VRM_ID,
          LIST  TYPE VRM_VALUES,
          VALUE LIKE LINE OF LIST,
          c(20) type c.
    *      c = 'select any'.
    data:begin of itab occurs 0,
          kunnr like kna1-kunnr,
          name1 like kna1-name1,
         end of itab.
    data:begin of jtab occurs 0,
          kunnr like kna1-kunnr,
          land1 like kna1-land1,
         end of jtab.
    PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                              default 'SELECT'.
    AT SELECTION-SCREEN OUTPUT.
    NAME = 'p_list'.
    VALUE-KEY = 'Name'.     "---> Data for key is the same with text
    VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
    APPEND VALUE TO LIST.
    VALUE-KEY = '2'.
    VALUE-TEXT = 'Country'.
    APPEND VALUE TO LIST.
    CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    start-of-selection.
    select kunnr name1 up to 20 rows from kna1 into table itab.
    select kunnr land1 up to 20 rows from kna1 into table jtab.
    case p_list.
    when '1'.
    loop at itab.
    write:/ itab-kunnr,itab-name1.
    endloop.
    when '2'.
    loop at jtab.
    write:/ jtab-kunnr,jtab-land1.
    endloop.
    endcase.
    <Added code tags>
    Moderator Message: Please use the "code" tags to format your code snippet.
    Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

    shawnTan wrote:
    Hi All,
    >
    > Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
    >
    >
    REPORT ZTESTING.
    >
    > TYPE-POOLS: VRM.
    >
    > DATA: NAME  TYPE VRM_ID,
    >       LIST  TYPE VRM_VALUES,
    >       VALUE LIKE LINE OF LIST,
    >       c(20) type c.
    >
    > *      c = 'select any'.
    >
    > data:begin of itab occurs 0,
    >       kunnr like kna1-kunnr,
    >       name1 like kna1-name1,
    >      end of itab.
    >
    > data:begin of jtab occurs 0,
    >       kunnr like kna1-kunnr,
    >       land1 like kna1-land1,
    >      end of jtab.
    >
    > PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
    >                           default 'SELECT'.
    >
    > AT SELECTION-SCREEN OUTPUT.
    >
    > NAME = 'p_list'.
    >
    > VALUE-KEY = 'Name'.     "---> Data for key is the same with text
    > VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
    > APPEND VALUE TO LIST.
    >
    > VALUE-KEY = '2'.
    > VALUE-TEXT = 'Country'.
    > APPEND VALUE TO LIST.
    >
    > CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    >
    > start-of-selection.
    > select kunnr name1 up to 20 rows from kna1 into table itab.
    > select kunnr land1 up to 20 rows from kna1 into table jtab.
    >
    > case p_list.
    > when '1'.
    > loop at itab.
    > write:/ itab-kunnr,itab-name1.
    > endloop.
    >
    > when '2'.
    > loop at jtab.
    > write:/ jtab-kunnr,jtab-land1.
    > endloop.
    > endcase.
    >
    > <Added code tags>
    >
    > Moderator Message: Please use the "code" tags to format your code snippet.
    >
    > Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
    This surely seems to be a bug to me(if not by design),  did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
    -Rajesh.

  • Having upgarded to Firefox 5 my desktop will not download from the Internet, it's working on my lap top with the same version and Norton 360

    I am trying to download a System scan from http://www.crucial.com/uk/systemscanner/ but its only downloading the shortcut logo, not the scan. It works on my Laptop with the same Firefox upgrades and Norton 360. This has only happened since I upgraded to V5.0

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • How to select paths with the same stroke width

    I would like to know how to select all the paths inside a document whose stroke width are equal to 0.361 points
    I will appreciate any help.

    here you go
    #target illustrator
    // script.name = selectPathsThisSize.jsx;
    // script.description = selects pathItems that have the same supplied stroke width; limited to 3 decimals;
    // script.required = a document with at least one path item;
    // script.parent = CarlosCanto // 6/5/11;
    // script.elegant = false;
    var idoc = app.activeDocument;
    var strokewidth = prompt ("Enter Stroke Width in points of paths to be selected", 0.361, "Select Paths this size:___");
    for (i=0 ; i< idoc.pathItems.length; i++)
              var ipath = idoc.pathItems[i];
                   if ( (ipath.strokeWidth).toFixed(3) == Number(strokewidth).toFixed(3))
                             ipath.selected = true;
    app.redraw();

  • How to share music with the same account.

    can anyone help?
    i have an ipod touch with lot sof music on already, i just bought a new iphone and have registered it to the same account, however only the applications sync to the iphone and the music doesnt sync.

    Whatever is in your iTunes Library can be synced with either or both devices.
    Have you gone through all the tabs in iTunes with your iPhone selected under "devices" and checked off the selections you want?

  • How to create colums with the same Field

    Hello every body,
    I have this report only with one field how i can create columns in base of rows for example some times  this field containing 40 rows then I need to create 2 columns of 20 that when is even or 15 then create 2 columns one with 8 rows and the other with 7.

    you can try making the report layout with multiple section. Please the field in detail section and right cick on the detail section and go to section expert and select the option "format with multiple columns" and then go to layout tab and select the each column width and select the printing direction option as down then across and click on OK.
    Now you will be able to see the multi column report.
    regards,
    Raghavendra.G

  • How Does FXHome compare with the latest version of Motion?

    Motion is the only application in the FCS suit that I dont have much experience with. I suspect there are quite a few people like myself that would tend to put motion as a last priority when getting to grips with FCS.
    I've been spending some time looking at the FXHome website (http://fxhome.com/) and watching their tutorials. It looks very impressive for what you get for the money. There are a suit of applications that they bundle which appear to cover everything motion can do and a whole lot more.
    IS there anyone using the FXHome software with Final Cut Studio? I'd be really interested to know.
    thanks

    hi
    i dont know much about fxhome, but looking at the site briefly it appears to be a hole mess of products and add ons. it says it works with fcp and premiere, so i presume its a plug-in type thing? it seems to double up on a lot of the features of motion, and while some of them may be more features, i doubt it offers the flexibilty and power that motion offers overall.
    i'd say make motion a higher priority!
    adam

  • Can I reflash BIOS on Satellite C855-12K PSKCEE to the same version?

    I want to *REFLASH* Toshiba BIOS to *THE SAME* VERSION. In other words, I want to force flash utility to install the same BIOS version despite it's already isntalled (instead of just displaying popup "the newest version laready isntalled" and closing application after this popup).
    Is this possible? Is there any way to fool flash utility to reinstall BIOS to the same version? Or to force older version install?
    Any workaround is appreciated.
    Thanks in advance.
    Satellite C855-12K PSKCEE

    Toshiba EU driver page provides only the windows-based BIOS version for download because its safe and easy to perform such BIOS update
    The traditional BIOS update procedure requires another method and other BIOS version as far as I know such version is available for authorized service engineer only.
    But the mentioned .exe file isnt an real exe application but this is an zipped folder.
    Using WinRAR or WinZip its possible to unzip this exe file clicking right and choosing Extract here

  • Pick a particular file and keep on target side with the same file name

    Hi Guys,
    I have got couple of files in a folder. I need to pick only two files, I have setup BPM procedure 2 payloads merge. To keep these merged file with  the same source filename.
    Source side file Directory
    abc_12345_20100408101029.xml (abc_seq number_timestamp.xml)
    xxx12345.xml
    test.xml
    abc_12345_20100408101149.xml
    Target Side, How do I keep with the same file name?
    abc_12345_20100408111239.xml ---  same file name with diffrent timestamp.
    One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
    Does anybody has got quick idea, any links etc.,
    Your quick and positive response will be much appreciates.
    Kind Regards
    San

    Hi,
    One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
    For this you can Availability time planning (i.e you can schedule the file adapter to poll for the files with in the time interval i.e 2 -5)...
    for generating the file name at target side you need to look for the Dynamic Configuration as you need to change the timestamp for the file..and i am not sure how this works in BPM..
    in normal scenarios dynamic configuration will help....
    HTH
    Rajesh

  • Satellite A660 How can i turn off the lighting of the power button?

    Hello, I recently bought a new Toshiba A660-1FL.
    However bothers me is the lighting of the multimedia keys, if I work in the dark.
    In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
    This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
    My question is: How can i turn off the lighting of the power button?

    Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
    Yes in fact, the difference is color, design, but also location and brightness of the LED.
    For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
    I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
    I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
    P.S. Also the fingerprints on the glossy keyboard do not look nice.

  • How do i create more than one account in Mail with the same isp?

    I am using suddenlink and have set up one account for Mail. It seems to work ok. I want to set up two others with the same provider but can't.
    Let's call the first account, account1
    It works.
    I set up another and call it account2.
    It is using the same provider which already has the account set up on their end, but how do I set it up to work on my end? Does it need to use the same username as account1 or can it use the user name for account2? I hope this makes sense.
    I just want to use three email addresses from the same provider with mail. I need some help. Please?

    Initially you need to configure via the provider's own web based control panel multiple e-mail accounts. If they don't have one, work it out with their customer support to have three distinct mail accounts. Then you can setup multiple logins by adding new accounts to mail. Since mail checks all accounts per Mac OS X user account simultaneously, it probably is best to use different usernames on the same internet provider. If you don't want mail to show all the information from all three mail accounts simultaneously, configure Apple menu -> System Preferences -> Accounts to have multiple users on your computer, and configure each of the internet service provider accounts for each separaet user on Mac OS X.
    Message was edited by: a brody

Maybe you are looking for