Satellite M40X-169 when connected to wireless unit shuts down with blue screen and restarts

Hello.
I got the problem with my notebook when i'm connecting and getting connected to the wireless network. My notebook is shutting down with blue screen error and then restarts.
Maybe you can help me to solve this problem, because i can normaly work when i need to be connected.
Plaese help me.

Hi
It is not easy to give you some precise answer but try to remove WLAN card from device manager and restart the unit. You can also check Toshiba download page and try to install the latest WLAN card driver.

Similar Messages

  • Mac OSX will not boot, when I log in, it shuts down after grey screen and grey loading bar show up: PLEASE HELP (:

    So here is a lowdown on my problem.
    I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted").  Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual.  I enter my password, hit the enter button (like I always do), and this is where my problem begins.
    After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath.  This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down. 
    No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
    NONE of the startup/boot commands work except holding the alt/option key.  I can't hold: Command plus r; command pr  to reset PRAM; shift to enter safe mode.
    I really dont know what to do here :/.  I have files that I want on the hard drive, that are pretty important but not critical.  I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
    More information that may be helpful:
              I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
              My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
              The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open.  Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
              Again, boot commands will not work, except for holding the alt/option key.
    So if anyone can help me fix my problem(s), which are:
    1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
    I would love you forever.  I would really prefer 1 or 2.  Thanks for reading this.

    Oh and one more thing, I do not have a disc drive in the mac osx.  The version I have comes without one.
    I am very puzzled about what to do right now.

  • Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

    hello i have a problem when i start woorksheet, my computer crash with blue screen.
    OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
    I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
    The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
    Thanks for your help.

    The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
    -The Help-->Report information - this will tell us more about the computer, video and installed memory
    -Installed hardware - what DAQ devices are you using (exact models!)
    -The worksheet that crashes - we need to see how the timing is configured in the worksheet
    -What other programs are running at the same time?
    -Does the worksheet crash every time?
    -Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
    Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
    Regards,
    -cj
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • HT4463 Hi downloaded grand auto theft from apple store,appeared to download but when I open it , it starts with blue screen and turns of the game. can anyone help

    Hi downloaded grand theft auto from apple store but when I open it, it starts the programme then switches off. Can anyone help

    Restart the iPad, if it still continues, trash it and redownload again....

  • When shutting down shows black screen and grey spinning weel and is slow

    i just bought my macbook air a week ago and at first it shut down real quick but now it takes about 20-30 seconds and shows a black screen with a white/grey spinning weel/circle before it turns off.
    also my safari is running slow and i use barely nothing only safari, spotify, word and agenda.
    thanks for the help
    macbook air 13 inch 1.4ghz i think and 128 GB 2014 i think

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • I have been using xfinity for some time with no problem. Now when I open it, it shuts down. I have reset, restarted, and done a sync. I also deleted and reloaded to no avail

    I have been using the xfinity ap for some time with no problem. Now every time I open the ap it shuts down. I have updated software, reset, done a sync, rebooted to no avail any ideas

    My Xfinity App does the same thing.  Hope they are coming out with a app update.

  • Satellite L650 - frequent computer restart with blue screen

    Hi, I bought an L650 about 2months ago so it is still under warranty.
    Recently (maybe last 2 weeks) it has continued to shut down with blue screen of death. It seemed to occur more if I opened up many tabs in internet and i thought it might be adobe flash but don't think so anymore.
    It says if there is new hardware or software installed try reinstall it but I do not know which software and there is no new hardware.
    "a problem has been detected and windows has been shyt down to protect your computer
    A process or thread crucial to system operation has unexpectedly exited or terminated.
    technical information:
    *** STOP: 0x000000F4 (0X00000000000003, OxFFFFFFFFAB007A4B30, 0xFFFFFFFFFA(rest off screen from camera)
    xFFFF800035C#1EO
    Somthing like above although its quick video on my camera so some numbers may be wrong.
    Can someone help if this is a hardware malfunction or my fault somehow?
    Is this a warranty problem or what should I do?
    I never made any windows CD or anything when I bought laptop unfortunately so do not know if I can reformat harddrive?
    Thanks.
    Kadin

    Hello
    It is worst than at the beginning with STOP: 0x000000F4 error message. It is always problematic to help with such problems because your notebook configuration, preinstalled software and activity is not known to us.
    In my opinion you should back-up all your important data, install OS again using HDD recovery option and test functionality with original OS without any additional software installation.
    If the BSOD will occur again and again I recommend you to contact nearest Toshiba service and ask for help. I have two Toshiba notebooks and until now I didnt notice BSOD at all.

  • ITunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    iTunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    For reasons unknown I found copies of many of these tracks as 256 kbps .m4a files in my Trash. As such I was able to remove the existing 128 kbps .m4p (Purchased) files (but not deleting them from iCloud), add the 256 kbps .m4a files to iTunes and then Add to iCloud whereupon, the original 128 kbps listings with the download from iCloud link switched to 256 kbps (Purchased) files. For a few of the files I accidentally deleted the 128 kbps (Purchased) from iCloud and when I added the .m4a to iCloud they appeared as 256 kbps (Matched) songs instead. Not sure why the difference, but it worked for several of these problematic files. But I still don't understand why/where these .m4a versions came from as most of these purchased predated iTunes Plus (e.g., my original purchases were 128 kbps). My new list of recalcitrant files is:
    Anna Nalick: Breathe (iTunes SOTW)
    Coldplay: Parachutes (tracks 4 + 5)
    Dave Matthews Band: Stand Up (tracks 3-6, 11, 12)
    Feis: One Evening (iTunes SOTW)
    Future Leaders…: Let Me Out (iTunes SOTW)
    Hinder: Get Stoned (iTunes SOTW)
    Living Things: Ahead of the Lions (iTunes SOTW)
    Low Millions: Eleanor (iTunes SOTW)
    Spymob: Sitting Around Keeping Score (iTunes SOTW)
    As you can see, most of these are iTunes single of the week (SOTW) offerings, so I'm not too bothered about them.

  • I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    Hi..
    Delete the app then reinstall.
    Hold the app icon down until all the apps jiggle then tap the x then tap Delete. Press the Home button once or twice to stop the jiggling.
    Then go to the iTunes store and re download the app.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    That should download the most recent version including whatever update was available.
    You won't be charged again.

  • Satellite L40 won't shut down with power connected, and won't go in standby

    Hi everybody. I hope someone can help me. Basically, there are two problems: one with shutting the laptop (Satellite L40-17U (Vista 32-bit Home Premium SP1) ) down when the power is connected, and one with closing the lid and putting it to sleep.
    1. Since a few weeks, it suddenly doesn't want to shut down, whenever the power is connected. When it is on battery, it will shut down. When the power is connected and I try shutting it down, it seems like it shuts down (all activity ceases and the LEDs go off) for about 1 or 2 seconds, and then it goes back on.
    2. When I close the lid (all settings in Vista are set to put the laptop in 'sleep' status when the lid is closed) the laptop goes into a state from which it can only be recovered by shutting it down by pressing the on/off button for about 10 seconds to completely shut it down. When closing the lid, only the battery LED keeps blinking orange (the way it should be), but apparently the laptop keeps consuming power, because when I reboot it later (first having to shut it down as described above) the battery tends to be quite a emptier than it was before rebooting it (like going from 100% to 65% in 30 minutes, while being in 'sleep' state). Also, when I open the lid, the other LEDs do go on again (green), but nothing happens.
    After rebooting by first pressing the on/off button for 10 seconds to shut it down, I frequently get a message that Windows could not be started, and have to run System Repair.
    I've just done a completely clean installation with the product recovery CD (didn't install SP1 yet), upgraded the BIOS to v1.90, but the problem remains.
    I'm afraid my only option will be to bring it away for a warranty repair, but knowing that these repairs can take weeks, I'd prefer to try a solution anyone here could recommend me first. If you have any ideas, please let me know.
    Thanks,
    Daniel Breslauer

    Hi guys
    Never had such issue on my notebook but regarding to another users here in the forum the BIOS might help to solve such strange notebook behavior
    To be honest the shut down issue is not known to me I noticed an standby issue on my notebook but the BIOS update helped.
    Therefore I recommend updating the BIOS firstly.
    If the issue will still appear, then the ASP should take a look into the notebook.
    Good luck

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

    My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts  to works. Anyone already have simmilar problem?

    A windows error message appears saying iTunes has encountered a problem and needs to shut down.
    let's get a crash log from itunes, and send it to the Apple engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Using FaceTime and iMessage when connected to wifi - am I correct this is free and not charged by mobile supplier?

    Using FaceTime and iMessage when connected to wifi - am I correct this is free and not charged by mobile supplier?

    FAcetime and imessage uses internet connection. If you are turning it on only when you are connected to wifi then it is free. However if you leave it on and you are already away from the network then it will be using your data which is provided by your carrier. It will be costly then

  • When I try to turn on my ipod the connect to itunes logo comes up on my screen and it won't let me do anything.

    When I try to turn on my ipod the connect to itunes logo comes up on my screen and it won't let me do anything.

    Restore it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

    i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

Maybe you are looking for

  • How to Open JPM files in Acrobat

    Is there is any option available for opeining JPM files (Image file with extension .jpm) in any version of Acrobat? Thanks, Rajasekaran A.

  • Beachball doesn't go away with certain project

    My PC Imac, Final cut Pro X 10.0.2 on Mac OSX Lion 10.7.3, 8GB, 2.7 I5 I was 95% done my project (Shanghai), and I was going to make one more edit before going to bed, but I got  beachball. I woke up and went straight to the pc and there was still a

  • Listener complications in second oracle homes after 11.2.0.3 upgrade

    Hi Everyone, I am running Oracle 11.2.0.1 64-bit on Windows Server 2008 R2, and Application Express 4.1.1. I decided to upgrade to 11.2.0.3 for the security/general fixes. I installed 11.2.0.3 into a separate home directory (home2) and then upgraded

  • How to remove iAntiVirus (freeware version)

    can't find any de-installtion routine to remove iAntiVirus (freeware version). Does anybody can help me? Thx

  • How to use jar -C programmatically

    Hi, I am creating a jar file programmatically. I want to use jar -C option. e.g jar -cvf myjar.jar -C anotherDir . Can anybody tell me how to do it?