Satellite M50-106: Can't install Windows XP service packs

Hi
I have a Satellite M50-106. I have a WinXP CD without SP1 or SP2 that I would like to install (don't ask me why:) Anyway, I can't get past the "setup is starting windows" screen, computer just freezes. Must be some driver issue. Does anybody know which driver is needen?
Peter

Hi
Its very strange and its not easy to give you a precise answer.
I recommend formatting the whole HDD.
If you install the Windows from the original Microsoft CD you should finished the OS installation. Then you should install firstly the SP1. Start the OS. Check if the SP1 was installed (you can see it in the system properties) If the SP1 was installed properly you have to install SP2.
After this procedure you can try to install the Toshiba stuff.
Good luck

Similar Messages

  • Satellite Pro S300L - Can I install Windows 7?

    Can I install windows 7 on my Satalite pro s300L if so which version 32 or 64 Bit?

    Hello
    First of all you can install what you want.
    Why?
    Its your notebook and you can do what you want with it! ;)
    In my opinion its depending on the RAM which version you should install If you use 4GB or more RAM, choose the 64bit version. Otherwise 32bit is enough and therefore you can get all drivers here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

  • Can't update windows 7 service pack 1, can I use windows 8 for AirPort Extreme on my laptop?

    I need help! I'm trying to set up AE with 3 laptops, a desk top, an ipad and two iPhones! Got the software downloaded onto all but one laptop. My laptop won't configure windows 7 service pack 1 so the AE software won't install. I've tried all Microsoft fixes and still nothing. Any ideas? Can I upgrade to windows 8 and proceed or can you tell me how to get this computer to configure properly?!

    Hey Me little
    You can set it up using the AirPort Utility app for iOS. It has the ability to set up the AirPort Extreme for you.
    AirPort Utility
    https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

    Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
    A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
    -What to do?
    CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
    Best regards
    /peter

    Hi Peter,
    Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
    Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
    In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

  • Satellite-A300-23E - Can I install Windows 7 Ultimate instead of Win7 Premium

    Hello,
    I bought a TOSHIBA laptop which has the following model: Satellite-A300-23E (Operational system is Windows Vista Home Premium)
    I know that TOSHIBA offers an upgrade to Windows 7 but the problem is that they will provide me with Windows 7 Home Premium which I don't want.
    Thus, I'm thinking to buy a full version of Windows 7 Ultimate (DVD).
    Will be there any technical/software problems in case I remove the original operational system of the laptop and install Windows 7 Ultimate ?
    By the way, I used Windows 7 Upgrade Advisor and the result was positive !
    Please, I need your help

    You should try Vista's drivers, as I know, they are compatible:
    For Webcam try this one:
    http://support1.toshiba-tro.de/tedd-files2/0/webcam-en-20090422172230.zip
    For touchpad, there are 2 drivers:
    Alps http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-en-20090320124756.zip
    Synaptics http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-en-20090320132707.zip
    talking about touchpad drivers, it can be Alps or Synaptics for your model, or can be both.

  • Satellite U500-10N - Can I install Windows XP?

    Hello,
    I have bought Satellite U500-10N and it has Vista but I want to install XP, is it possible?
    My plan is to back up all my files, and then put installation CD of XP, delete all files of Vista and record fresh new copy of XP. And then install all nessesery drivers for my laptop to functional normal? Is it possible? :\ I
    'm afraid if I install XP than some function on my laptop will not work.
    I'm looking for help, plz if anyone know something i will be grateful

    Hi
    Theoretically you can install Windows XP, why not? ;)
    But I dont understand why you want to use such an old operating system. I mean the Satellite U500 is really fast enough for Vista and in few days Windows 7 is the present. You should be happy with your preinstalled Vista version that should run well.
    The point is that Toshiba doesnt offer drivers for U500 and XP so you have to collect all drivers yourself on the Internet that takes a lot of time. Furthermore I think some special functions like the FN keys will not work because there you can only get a driver from Toshiba.
    Its your choice what you do but I would wait for Windows 7 if you dont like Vista Satellite U500 should also support Windows 7.

  • Satellite L450-136 - Can I install Windows XP?

    I have just got a Satellite L450-136 with Windows 7 and all Toshiba Utillities loaded. I dislike Windows 7 and much prefer Windows XP.
    Can I remove all Windows 7 and install Windows XP on this laptop?
    Thanks.

    Hey,
    > Can I remove all Windows 7 and install Windows XP on this laptop?
    Of course, you can install every OS that you want :)
    But dont forget to create the Toshiba recovery disk as mentioned in user manual. If you want Windows 7 back with all drivers and tools you can restore it from recovery disk because it contains an image of factory settings.
    Have you checked if you can get all drivers for your model and XP?

  • Satellite A100-011 - Can I install Windows 7 64bit?

    Can you please tell me if I install Windows 7 64bit where I can find drivers, because they are not listed on Toshiba site.
    Thanx.
    Akis

    Old notebook models are not supported for all operating system versions so you will not find these drivers on Toshiba support page.
    What you can try is to search them on hardware manufacturers pages but I don't think you will find all of them.
    You must also understand that new operating system is designed to run with newest hardware and it is always problematic to use newest OS with old hardware.
    What you can also try is to check if some Satellite A200 has the same hardware and if A200 is supported for Win7 64bit you can use these drivers and try to install them on your A100.

  • Satellite A200-137 - Can not install windows after hard disk crash

    last week my a200-137 crashed and now i have new hitachi 500 gb hdd on it, same as before the crash.
    I install with Toshiba recovery DVD windows Vista on it and after succesfull install i have to start windows, it says preparing windows for first use then i have to wait a moment and then i get the message that windows installation is not completed. But it is complete!
    After trying for 3 times installing with recovert I tried to install windows xp.
    After a couple of minutes and transering files, I get the message no disk found! It says that there is no hard disk on the laptop!
    But when I start up the boot menu or the setup menu I can see the 500 gb Hitachi hard disk!
    So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?

    > So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?
    On this virtual way it is not easy to say why you cannot install recovery image. It would be interesting to know if the same will happen when you replace HDD with the same or identical one.
    Which capacity has had original HDD?
    If possible try to obtain original Microsoft installation disc and check if HDD will be recognized by Vista or Win7 and of course if you will be able to install and start preinstalled OS.
    About WXP installation: it is well known that WXP installation will not starts properly due to missing SATA driver that must be loaded before WXP installation starts.
    Check this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

  • Satellite R630-11L - can not install Windows XP SP2 Prof

    I removed ald Hard disk -> insert new (SATA) Hard Disk -> Insert CD Windows XP SP2 Prof into DVD Driver -> Power Off.
    The Power On -> Laptop reads CD Windows XP SP2 -> Installation process
    But at the end, only "bluescreen": can NOT install (the CD ist already installed successfully for another old laptop.
    I have 5 times to try.
    Who has done successfully ?
    Thank a lot!

    I have a L650-PSK2cu that was a real hassle to get the drivers installed properly, but that was because I installed INTEL HD video drivers BEFORE the AUDIO and it made the installation of AUDIO drivers impossible. I had to do afresh install a second time. Once I did the 2ND fresh install and installed the COnexant Audio Drivers BEFORE the INTEL HD Video drivers it worked great. Live and learn. This machine with XP PRO runs 10 times better than Win 7 64 BIT. XP WON'T die for a while. I just hope people are archiving drivers before they become unavailable.
    Make sure if you have anewer chipset intel i3,i5,i7 etc... tha you set the bios to compatibility mode if possible as well.

  • Installing Windows 7 Service Pack 1

    Hello
    I am unable to install Service pack 1 for Windows 7 home premium (OEM edition) and a couple of other updates, in the past the macbook has downloaded and installed windows updates fine, In this instance it downloads but I get a error message error 800B0100. I have tried everything down the windows path but have got nowhere, a search on the web suggests that while some people install this update on a Bootcamp partition others cannot.
    Can anyone help.
    Thanks
    Stephen

    You have OS 10.7 but not Bootcamp 4?
    Friend of mine on OEM non Mac has similar long standing SP1 problem; as a possible/last solution,
    http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/64611492- 58b5-49d7-845e-59fb53c1c48f/
    I see from search for W 7 SP1 error 800B0100 in Windows forums:
    rename the \Windows\SoftwareDistribution folder to \Windows\SoftwareDistribution.old.
    I learned (by doing it) that you can rename outside of safe mode in same login session if you disable Windows Update completely via control panel. Then you could turn W. Update back on & try again. 
    You will see more on this from Microsoft itself by search for: rename \Windows\SoftwareDistribution

  • Cannot install windows 7 service pack 1 on my HPE-400z desktop

    I have an HP  hpe-400z desktop pc.  It is running windows 7 home premium operating system.   Ever since Windows 7 SP1 came out, my pc has been trying to install it.  Every time it tries to install, during the boot process the install fails and the system reverts back to original settings.  I get the error message E_FAIL  (0x80004005).  I have tried letting the automatic updater install this sp1 and I have also downloaded it, running the update, and then the same thing happens.  I have tried it without my security software running and get the same result.   This has been going on for so long now that I do not even bother to watch my machine boot up,- I know it is going to boot twice due to the failure of installing sp1.  Please help!

    I would suggest you download the Win 7 Readiness Tool (see list of OS versions) located here
    The System Update Readiness Tool can help fix problems that might prevent Windows updates and service packs from installing. For example, an update might not install if a damaged system file prevents the update from recognizing the version of Windows that's running on your computer.
    If your computer is having problems installing an update or a service pack, download and install the tool, which runs automatically. Then, try installing the update or service pack again.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • ITunes problems after trying to install Windows XP service pack 2

    Hey guys, I've been having trouble with my iTunes among other programs recently, and I was wondering if anyone might be able to help. Basically, my iTunes has been acting strangely ever since I tried upgrading my Windows XP system with Service Pack 2. When it ran through installation, it got all the way through. However, once I rebooted the computer, it told me it was unable to complete due to an unstable system. So it told me to uninstall the software, and I removed it from my program list.
    Unfortunately, once I complete removed it from my hard drive, several programs on my machine started to malfunction. Now, whenever I try to play iTunes, it just stops working all of a sudden along with the rest of the sound software on this computer.
    The big problem is, I forgot to back up my system before I did all this, so now I'm worried that I'm stuck with this dysfunctional hybrid of a computer system. So now, I've tried reinstalling the old Service Pack 1 onto the computer, but it always seems to cancel in mid-installation.
    I know this is probably of a topic that should be posted, on an XP forum, but I was hoping that maybe someone on here might be able to give me some advice on how to solve this problem. If not for my computer, than perhaps at least for my iTunes trouble.
    Thanks to all who might be able to help.

    The reason I would think your iTunes stopped working is because your system is no longer compatible as iTunes requires Windows XP SP 2 in order to work properly.
    If you want to back up your iTunes content then I would suggest opening My Documents>My Music and choose the whole iTunes folder and move it to an external drive. That is normally where all your content is saved, unless you didn't have 'Copy files to iTunes Music folder when adding to library' selected in iTunes then you might want to use the whole My Music folder as your backup.

  • Satellite L650-1GQ - Can't install Windows XP

    I bought new laptop L650-1GQ without Windows system. I wanted to install XP system, but any time I go to BIOS and choose that it will start from CD, on the beginning I got information : Check cable connection! PXE-M0F: existing Intel PXE ROM. No bootable device - insert boot disk and press any key.
    What's wrong? Please help me.

    Hi buddy,
    Have you already tried another Windows (XP) disk if you can boot from it?
    I think you get this error message because no operating system is installed and the notebook isnt able to boot from this disk. Maybe its scratched or something else

  • Satellite L555-S7008 - Can't install Windows 7 display driver

    Hi Guys
    I'm confused now
    I have a Satellite L555-S7008, I Installed a Windows 7 ultimate edition but unfortunately the display driver didnt work. Now I have Pain in my eys because of the resolution. What should I do in order to make it work?
    Hardware detected "Mobile Intel(R) 4 Series Express Chipset Family" but it doesnt support this type of hardware
    2) What driver should I installed for PCI Network communication controller?

    Thanks for ur reply freind
    I Followed the Below but with no success:
    * Microsoft Windows* Vista / Win7 "Have Disk" Installation Instructions
    1. Click "Start" then right click on "Computer" button and select properties.
    2. Click on the "Device Manager" selection on the left.
    3. IF UPDATING DRIVER GO TO STEP 5
    4. Double click "Video Controller (VGA Compatible)" if present under "Other Devices". (Go To STEP 6)
    5. Select "Display adapters" then double click on the graphics controller shown.
    6. Click on "driver" tab and select "Update Driver".
    7. select the following option: "Browse my computer for driver software"
    8. Select the following option: "Let me pick from a list of device drivers
    on my computer".
    9. Click on the "Have Disk..." button and then the "Browse" button
    10. Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Highlight "igdlh.INF"
    file. Click on the "Open" button
    11. Click on the "OK" button and then click "Next" button. The operating system will install the driver.
    12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded.
    But I Noted that the file "igdlh.INF" is not in the directory as i found inside it this" kit19757.inf""
    Pls help freind,Realy i have pain in my eyes
    Thanks

Maybe you are looking for

  • Error in Importing PAR file in NDWS

    HI Gurus, I am trying to import a PAR file in NWDS, but it is showing an error. below is the screenshot after pressing ok below is the screenshot for error here the project is being created but the coding part is not coming. help me.

  • Installed 11gXE on Win Professional (32-bit) - no connect to XE db nor APEX

    Hello - I have searched thru many threads here, but cannot seem to find my situation (exactly). Some threads look similar but their fix is not it. 1. I have successfully installed O11gR2XE (at least the install program says so). 2. Upon clicking on t

  • How can I make "grunge text" ?

    Using PS cs5 extended with win 7 pro.  I've been trying to figure out how to make grunge (sp?) text.  I figured  I would need to make some type of layer with lines on it, put it above the text and then use a clipping mask.  I don't know how to make t

  • Evaluate xmla expression in a variable

    Hi, I have a xmla code which I'm trying to put it in a variable. While evaluating the expression I'm getting the error as   The expression might contain an invalid token, an incomplete token, or an invalid element. It might not be well-formed, or mig

  • Time stamps on email wrong

    I upgraded from Office 2007 to Office 2010 and now the timestamp is wrong on the emails I receive on my iphone.  Any suggestions as to what I need to do to correct this?