Satellite M645-S4048, factory reset, image driver not working correctly

After searching the Toshiba support site for a way to reset my computer to factory settings, I attempted the preinstalled method (holding 0 while starting up the laptop), and everything looked to be fine until the system began installing Toshiba drivers. Once it installed the "Intel graphics driver", and restarted the computer to complete it's installation, I couldn't get past the BIOS without the screen going blank. I can hear Windows starting up and popups for auto-restarting the computer before the computer restarts and does the same thing all over again, but no image. It seems like the computer makes no connection to the monitor whatsoever past the BIOS. I attempted to restart in Safe Mode, where windows shows a popup stating "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer." But the I also tried plugging in an external monitor, but I get the same response there as well. If I need to reattempt the factory reset, is there a way I can prevent Toshiba from installing that Intel graphics driver?

I don't believe there is a way to do that, no. However, I agree that reattempting the factory reimage would be your best bet.
- Peter

Similar Messages

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Satellite A305-S6858 win XP video driver not working

I recently bought a Satellite A305-S6858 in the States and I downgraded the Vista Home premium pre-installed
to Win XP 32 sp 3. I had several problems in getting the computer up and running. After reading several posts
on various forums I managed to install the OS but I am still unable to use the Intel video driver.
After installing the ones available on the toshiba web site I still have in Device Manager under the video adapter node
2 Mobile Chipset 965 entries with an exclamation point.
I recently discovered that not having the video driver installed the OS doesn't allow Stanby and Hibernate as power down options.
Has anyone stumbled in the same issue?
Thank you

You need to install the Base drivers first.
Try installing the Intel Chipset Driver first, then the Display Driver.

SPA922 Factory Reset Procedure Does Not Work

Is there a hard reset option?
Thanks!

Linksys FAQ states:
4: Lost web password for SPA device
To reset your SPA device to the factory default values, unplug your Ethernet cable, access the voice menu (****), and press 73738#.
Leaving power on the phone of course, and unplugging the Ethernet doesn't allow access to voice menu via (****); I am able to access the phone menu and select 8.VoiceMail which prompts for the password, but entering 73738# returns a wrong password response.
We received 10 of these phones from our property managers as a signing bonus for our new offices because they new these phones would work with our voip services. Half of the phones did not have passwords and are already configured along side our Polycom SIP Phones, the remaining have this password issue.
My definition of potential hard boot process as an example; is holding down some sort of a rest button or internal jumper setting and powering it up to clear the onboard PROM, EPROM, EEPROM, etc.
Thanks for your response!

Satellite A45-S1202...sound driver not working?

Greetings. I couldn't find this problem by browsing/searching the forum, so here I am:
My laptop's sound works, but ONLY if I'm using the Imaging disc that came with the comp. I've tried a copy of XP Professional w/ SP1...no sound, so I reinstalled the drivers, and it still didn't work. Here's where it gets confusing: I've taken my laptop to a computer store and had XP Pro installed by them and everything worked fine. The tech even included copies of all the drivers he installed, so I could do it myself. I tried it again a few years later, and I didn't have sound. I was fine with keeping it with the very basic version of XP that the thing came with, but in order to get the new version of iTunes, I needed SP2, and my new iPod needs SP3. So, I install SP3 and yep, no sound again. It looks like the newest sound driver for this computer is six years old (which means more it was a year old when I got the dang computer). Any way to fix this?

Actually...it's fixed itself. I don't understand, but hey!

Moving an image does not work correctly

I have Photoshop CS4, version 11.0.2, installed on a 64-bit Windows 7 system. I am attempting to complete an exercise which requires me to move one image on top of another. I do not recevie an error messge. The function simply fails.
All software is up to date. I have 4 gigs of RAM. Lots of free disk space. My video card is an Nvidia GTX 460 (1 gig).
I have the two images open side by side. I select the move tool. I click and attempt to drag one image on top of theother. Rather than moving on top of the otehr image, the selected image moves behind the other image. That is, the selected half of the window moves behind the other half of the window.
The exercise calls for holding down the shift key when I do the move. If I hold down the shift key, the two images move right or left in tandem. That is, they simlutaneously slide to the dege of their window and stop.
It feels like I have something set wrong somewhere.

Usually when moving layers between images, one would use the move tool
(click on the image in the document window and drag to the other document)
and hold the shift key down if you want the layer pin registered (aligned and
the images are of the same dimensions) and if the images are of different
dimensions, holding down the shift key centers the new layer.
Added:
MTSTUNER
Message was edited by: MTSTUNER

Zoom image slider not working correctly

I am using the {tag_largeimage,zoom,600,360} on http://meluka.worldsecuresystems.com/bedroom/bedside-cabinets/low-storage-on-castors. I want to either 1. make the slider work for the full width (600px) as at the moment the slider effect works for what looks like the deafault 150px width & then has no effect, or 2. Customize the slider width to 150px width (keeping the image at 600px wide). Does anyone know if this is possible with css/javascript & if so, can you please point me in the right direction?

I just upgraded from the original iPhone 8Gb model to the iPhone 4 32Gb model. One of the first few days after I got the phone I had this problem and couldn't accept a call from my mother. A few days ago my wife tried to call me and the same thing happened. On the same day my wife tried to call, the unlock screen was black and the slider would not unlock the phone. I could pull the slider all the way to the right side of the screen, but it would just stay there and not wake the phone. Unfortunately, my wife's uncle was standing right next to me when this happened, and he just got the Droid X, and promptly took it out and unlocked it easily while mocking me. I never had this issue on my original iPhone, and it's kind of annoying, even though it doesn't happen very often, I hate having the question of "will I be able to answer my phone this time?" in the back of my mind. Reception is great, and I can hear people soooo much better than on my original iPhone, but this unlocking issue is the thing making me irritated. Especially when I'm right next to someone holding a brand new Droid X and showing me how easy it is to answer a call.

DVD Drive not working correctly after Lion install

Lion is doing something strange to the DVD drive in my Mac Pro. Sometimes it works, sometimes it just freezes up apps that are associated with it (such as finder, disk utility etc). The only way to eject is a reboot. It will not read the contents in this scenerio.
I have tried different DVDs, repairing permissions - everything you can think of. I am 99% confident this is somehow related to a bug in Lion.
Anyone else have a similar issue?

I may have found it.
I use Kepler 64b and I do have an Apple 1.6 JDK installed in the JavVirtualMachines folder.
Below is my copy of /Applications/eclipse kepler/Eclipse.app/Contents/MacOS/eclipse.ini
-startup
../../../plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.200.v20130 807-1835
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XstartOnFirstThread
-Dorg.eclipse.swt.internal.carbon.smallFonts
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
-Xdock:icon=../Resources/Eclipse.icns
-XstartOnFirstThread
-Dorg.eclipse.swt.internal.carbon.smallFonts
You may notice the line that says “-Dosgi.requiredJavaVersion=1.6”. I dont know if that is significant but our two systems are subtly different.

Combo drive not working correctly AppleCare Question

If I decide to take the system to my Genius Bar will Labor part of replacing the current drive with a superdrive be covered by my AppleCare Plan? Also is there anyway for me to know the price of a superdrive at the Stamford CT Apple Store?

if your combo drive has suffered a manufacturers defect then your combo drive would be covered if you are within your applecare coverage period. There are no upgrades.

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
(113079)

I have purchase iphone4 from someone,it is not factory unlock ,how can i get it factory unlock,its safari not working and its not showing drive on my computer

i have purchase iphone4 from gray market,it is not factory unlock,how can i get it factory unlock,
its safari not working and it is not showing drive in my computer.

iPhones are sold in carrier-locked and unlocked versions. If the phone has a carrier lock on it, you must contact the carrier to have it removed (you probably need to bring the phone to the carrier for the process). If you don't know the carrier, you won't be able to get it unlocked. US carriers will not remove the carrier lock and it cannot be removed.
How is Safari behaving that makes you say that Safari is not working? The lock status of the phone won't affect Safari, except that if the phone is locked and you aren't using the carrier (and SIM provided by the carrier) to which it is locked, then you can't use the phone or 3G service, only Wi-Fi.
The iPhone should not appear as a drive on your computer, so there's no error there.

Hello?wish you all success in your work.I used what you bought a 3GS.Factory Reset, and am not turned on.What to do now?please help me?

hello?wish you all success in your work.I used what you bought a 3GS.Factory Reset, and am not turned on.What to do now?please help me?

Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069

Image capture not working in lion

Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

MacBook Pro Late 2011 : Optical Disk Drive not working?

MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.

Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw

The reset feature is not working

I have tried resetting a 4th generation ipod touch but the reset feature is not working. Is there an alternate?

On the iPod Touch itself there is a factory reset option under;
Settings -> General -> Reset (scroll all the way to the bottom) -> Erase All Content and Settings.
OR
Put your device in DFU mode , and iTunes will do a restore. Plug the device into your computer then; Hold the lock and home button for 10 seconds, then release the lock button but remain holding home for another 10 seconds until iTunes opens and asks you to restore.
hope that helps,
thanks!

Satellite M645-S4048, factory reset, image driver not working correctly

Similar Messages

Maybe you are looking for