Satellite M645-S4110 Network drivers missing

Hello!
I'm trying to restore the network drivers for this model, but I can't even get connected when I have an ethernet cable connected directly to my modem.  I'm using another laptop entirely to post this question.  Please help!

Satellite M645-S4110
Downloads here.
What's the question?
In case you're doing a clean install of Windows 7, it's unlikely things will work out unless you install drivers in the right order.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here .
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 72 of the User's Guide.
   Satellite M640 Series User’s Guide
-Jerry

Similar Messages

  • HP Omni 120-1123w network drivers missing

    Network driver is missing and cant get online to do anything with me computer. Hp website kept spinning around and dont show me any drivers for this devices. Help please. thanks 

    Something else I've noticed is both browsers IE and FF hang a lot....'not responding'. This is usually what makes me have to do a hard shut down because they don't come back out of it for long before they go back into not responding mode and I just get fed up with the whole waiting on them to do whatever they have to do to function properly. So my browsers are affected as well.

  • Pavillion g6 network drivers missing win 7. missing

    Reinstalled win 7 os and now can not go on line missing network drivers

    Hi: For the ethernet (wired) adapter driver, download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false

  • Satellite A200-1DN - WXP Network Drivers for Imaging

    We have (by a prior employee) a number of Toshiba Satellite A200-1DN Laptops.
    As there are many, we intend to image them to reduce the labour overhead for updates and maintenance etc.
    However, Despite the WXP drivers being finally released, they do not contain instructions as to which files
    to put into an image so that the network drivers work.
    Any help or pointing to a set of instructions are much appreciated.
    R Price

    Hi
    It looks like the Satellite A200-1DN would belong to the PSAE0E series.
    You have to choose the XP drivers exactly for this A200 series. Thats important!
    As far as I know the notebooks supports also the LAN Chip from Realtek RTL8101 Family Fast Ethernet.
    If you want you can try to install the original XP driver from Realtek website. This one should also run.
    Good luck

  • Pavilion dv7 missing network drivers

    Hi Guys,
    My Notebook slowed down quite a bit a little while back (due to virus') , I restored the system to an eirlier point in time, doing so removed all my network drivers. I have been trying for weeks to find the right drivers but all efforts have been futile. My network controller hardware id is  PCI\VEN_14E&DEV_4727SUBSYS_1795103C . If someone could help it would be most apreciated.
    Cheers
    This question was solved.
    View Solution.

    Hi:
    This driver should work for you...
    Broadcom Wireless LAN Driver for Microsoft Windows 7
    File name: sp57965.exe

  • Missing network drivers

    hi,
    i recently changed OS to linux, then panicked and changed it back to windows 7 - i have managed to lose my network drivers and cant get back on line.  There are little yellow tags on the Ethernet, network and video devices, but it wont let me update them.
    I have seen from other posts that you may need the ID's of these to help out:
    Ethernet
    PCI\VEN_10EC&DEV_8136&SUBSYS_1584103C&REV_05
    PCI\VEN_10EC&DEV_8136&SUBSYS_1584103C
    PCI\VEN_10EC&DEV_8136&CC_020000
    PCI\VEN_10EC&DEV_8136&CC_0200
    network
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
    PCI\VEN_14E4&DEV_4727&CC_028000
    PCI\VEN_14E4&DEV_4727&CC_0280
    video
    PCI\VEN_8086&DEV_A012&SUBSYS_1584103C&REV_00
    PCI\VEN_8086&DEV_A012&SUBSYS_1584103C
    PCI\VEN_8086&DEV_A012&CC_038000
    PCI\VEN_8086&DEV_A012&CC_0380
    can you help me?
    thank you
    jb

    Ethernet = http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy​...
    Network =  http://global-download.acer.com/GDFiles/Driver/Wir​eless%20LAN/Wireless%20LAN_Broadcom_5.100.235.19_W​...
    Video = http://downloadcenter.intel.com/Detail_Desc.aspx?a​gr=Y&DwnldID=18496&lang=eng
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Windows 7 Network Drivers No Longer Works

    Bought a MBP a week ago, just installed Windows 7 on its own partition, installed bootcamp, everything worked fine for the first day. The next day, it did not recognize my network drivers (wireless, ethernet). Control Panel states that they are not installed correctly with an exclamation mark. I've tried installing the drivers from Windows, it 'could no find file'. I've tried reinstalling the drivers using MBP BC CD, after its finished, it reboots, and windows tries to install the remaining drivers. A windows popup keeps stating that 'driver was not installed correctly' and the BC CD does not resolve the issue. I've tried uninstalling the drivers and then manually installing as well as rebooting and allowing windows to reinstall the drivers. Nothing has worked.
    So that leaves me with this conclusion, the drivers are now missing from the Windows partition as they can not be found and the drivers on the MBP BC CD will not install successfully for some strange reason. It kind of makes it hard to do anything at this point.
    Before this happened, I did encounter a BSOD, but did not give me much information on why (there was a hex error code though). It's a bit frustrating not being able to install the drivers from disk, even manually. Not sure why it won't install successfully, shouldn't be a hardware issue since it works fine on OS X 10.6.
    Any thoughts, help or opinions would be much appreciated.

    Here are things I tried....which I accumulated from multiple forums....and, unfortunately none worked for me, but might work for you:
    http://discussions.apple.com/message.jspa?messageID=11518129#11518129
    What did work for me: deleting the driver. reinstalling it. rebooting my router about 5-7 times, and they finally connected.
    probably just dumb luck.

  • Satellite M645 - How to reset the touch buttons?

    Hello everyone.
    I have a Satellite M645 with Windows 7 / 64 bit and recently some of the touch buttons have stopped working. These include the eco utilities, wireless, lighting, play/pause, mute and touch pad on/off button. Strangely the volume up and down work fine.
    All the buttons are lighted all the time and when touched they go off (as regular) it is just that the function they're meant to do is not done.
    For this I found a similar threat (http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=248139&#248139), but when trying to install *Toshiba Value Added Package* and *Flash Cards Support Utility* from the website the file I download can't be installed as I get this message:
    "The version of this file is not compatible with the version of Windows is running. Check the computer's system information to see if you need an x86 or x64 version of the program and then contact your supplier."
    I've tried installing both (x86 & x64) but neither of them work. That's it for now, I really appreciate any advice or side solution you can give me.

    Hey,
    Where have you downloade Value Added Package and Flash Cards Support Utility? I have done a Google search and it seems that Satellite M645 is an US model and therefore all drivers and tools can be downloaded here:
    http://www.csd.toshiba.com
    Make sure you download the correct version of VAP and Flash Cards Support Utility. That means if you have Windows 7 64bit you have to download the 64bit version too.
    Another question: Have you installed all other drivers like chipset?
    Also try to load the default settings in BIOS and test it again.

  • Silly issue: Unable to install network drivers for Win2008r2 or Win2012r2

    It must be because it's Friday evening and I'm just lucky like that but for some reason I'm not able to install the network drivers for my Windows 2008 R2 or Windows 2012 R2 installs in B200-M3 servers.
    I've mounted the Cisco driver ISO (ucs-bxxx-drivers.2.1.3.iso) and in each OS I've gone to Device Manager, then had to View -> Hidden Devices to show the Network Adaptors, then tried to have it install drivers from the ISO but no luck.  I did go to the correct subfolder Windows -> Network -> Cisco -> etc.  and even tried just having it search the whole CD, searching subfolders.  It either says no drivers found, or--for Windows 2012-- it says that Windows has determined that the driver software is up to date.
    I've got to be missing something obvious.  Any help would be most appreciated!

    Hi Benjamin
    We have done this many times; which UCS version are you using ?
    Check
    Interop Matrix http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf
    and Installation Guide
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/os-install-guides/windows/b_B-Series_Windows_Install.pdf
    Please use
    ISO image of UCS-related drivers  Release Date 12-DEC-2013
    ucs-bxxx-drivers.2.2.1.iso
    Normally you are asked during the Windows installation if you would like to install additional drivers; say yes, unmap the install iso, map the above driver iso, install fnic and enic driver; then unmap driver iso, map Windows install iso; do a refresh.
    Good luck
    Walter.

  • MSI GAMING 970: Network drivers not found

    Good day,
    I have encountered an issue, made more confusing as i was playing a MMO when it occurred. MSI GAMING 970
    Network drivers are missing:
    "Windows did not detect a properly installed network adapter. If you have a network adapter, you will need to re-install the driver"
    so I try to reinstall them. then I get the error message :
    "The realtek network controller was not found. If Deep Sleep Mode is enabled Please Plug The Cable"
    The case has not been opened, the computer was on and running a game at the time of the fault.
    Anyone got any ideas?
    Thanks in advance for your help.
    AJS

    Quote from: tyrsfang on 14-January-15, 20:26:54
    I did give all relevant information as the issue is with the integrated network interface.
    Device manager shows nothing, drivers won't re-install because it can't see the device. Drivers are from CD. I can get (very) limited access to the internet with a wireless card but it's intermittently at best.
    Read the post.
    What CPU? What power supply? What memory?
    Without proper information we are going to spend many posts trying to figure out what the problem is. Instead of arguing it, just provide the information from the >>Posting Guide<< and we can more easily and better diagnose the problem.

  • Drivers missing

    Greetings. I'm stuck trying to find appropriate drivers for hp pavillion 17f151nr laptop after installing win7. Usb, network drivers are missing, also 4-6 unknown devices. Is out there of full set of drivers for this laptop model or some kind of driver recovery program?
    Thank you.

    Hi,
    Sounds like you have not run Windows updates. Pleasse install the following 2 drivers then reboot:
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23677&lang=eng
    after that, install the following drivers:
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66403.exe
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45205.exe
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52798.exe
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23734
    http://ftp.hp.com/pub/softpaq/sp61001-61500/sp61291.exe
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132782_1 
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Toshiba Satellite M645-4070 windows 7 64 bit reinstall

    I had to reinstall windows 7 on my computer.  Luckily I already had a legal copy of windows 7.  I need to know what exact Toshiba drivers to install to make sure my system is running right and there are no hardware conflicts.  Thanks, Andy 

    Satellite M645-S4070 Specifications
    Satellite M645-S4070 Downloads
    Unfortunately, you have probably wiped out the Toshiba Recovery partition on your HDD when you used the Windows 7 64bit retail disk to reinstall your OS. As well, it sounds like you never made a set of Toshiba Recovery disks before this mishap. The info for all this begins on page 61 of your Satellite M640 Series User’s Guide.
    Using the recovery utility would have rebuilt your HDD to its factory default out-of-the-box state, including the recovery partition, Win 7 64bit, all Toshiba drivers and utilities, and all software your system originally came with. If you do not think you wiped out the recovery partition when you reinstalled Windows, then while powering on the system you could try holding down the '0' (zero) key until you see the Toshiba Recovery utility menu. If this doesn't work see this article:
    Pressing the Zero Key While Powering on the Computer Does Not Start the Toshiba Recovery Wizard
    If none of the above works, you can still order a set of recovery media from Toshiba, which I would strongly recommend. Rebuilding the recovery partition, and having a set of recovery disks for backup, could save you a lot of grief on this, and on any future rebuilds.
    Ordering Recovery Media
    However, if your recovery partition won't work and you are unwilling to order a set of recovery media, then see these instructions and use this utility:
    How to Custom Install Windows 7 and add Toshiba-provided drivers & utilities with the Toshiba Softwa...
    Toshiba Software Installer for Windows 7
    Good luck.
    Mike

  • **I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

    **I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

    I have been through it again and at the end it came up with the error:

  • Is it possible to install a 3G SIM card reader to Satellite M645-S4070

    Hi there!
    I have Satellite M645-S4070 laptop with serial no. YA153766K.
    It is WiMAX ready and also has a SIM card slot but does not have a SIM card reader.
    I took a slight look inside and it does have something that has "3G" written on it.
    Would it be possible to install a SIM card reader to my laptop?
    I know, that I could also use a 3G USB modem but it would be a lot more convenient to get connection without additional devices around my laptop.
    Thanks!
    Taros

    Hi
    As far as I know there are models which supports 3G or Intel 4G WiMAX
    Your unit supports 4G (WiMAX)
    Im not quite sure if its possible to upgrade this unit with an 3G module but if it would be possible, this needs to be done by Toshiba authorized service technician.
    By the way: your notebook belongs to the Toshiba US series and was released for the US market therefore I recommend checking the Toshiba US forum:
    http://forums.toshiba.com/

  • Skipping problems on Satellite M645-S4050

    Hello,
    I have a Satellite M645-S4050 and I I bought it in July of this year.
    I've noticed that if there is something playing on my computer, whether music (on itunes) or a video, and the laptop is moved (even if the desk it's sitting on is bumped slightly or I put my elbow down too hard) it skips like the old walkmen used to. Once or twice it has even gotten stuck like a phonograph. I brought it in to where I bought it and the guy said that it was the way the new software was made in a lot of the faster hard drives and the only way to do anything would be to buy a more compact hard drive and transfer everything.
    But I notice it getting worse and I am disinclined to believe him because the point of a laptop is to have a modile computer. I cannot even listen to music or play minesweeper in the car because the skipping is so bad it messes with how the computer functions. Is this true and is there anything I can do to fix it?
    Thanks,
    na

    Hi na,
    I agree with as*** and if you have HDD protection utility, you should be able to reproduce this issue: Just move your notebook a little bit. You should notice this skipping problem again.
    As far as I know in options of this tool, you can change the sensitivity. Choose a lower value, maybe it helps! :)

Maybe you are looking for

  • Where can I buy the Mac Pro 2013 motherboard? Just the motherboard

    So where can I buy JUST the Mac pro 2013 motherboard? If you can, please link it. Thanks!

  • Help with Zen Ne

    Has anyone else's Neeon malfunctioned so that you can't add files to the player?It started out as a problem with the recording function, but then the player wouldn't recognize the files on it. I then removed all the files, and tried to retransfer the

  • Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?

    Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ? I can import Canon Raw images from my s120 into the iPad Air's photo roll but then the import from photoroll into LightRoom Mobile collections fails. Any ideas on how t

  • Essbase drillback to FDM - Error: 2067 - Shared Services Provisioning

    Working with EPM 11.1.1.3. Trying to get Essbase Studio to drillback to FDM. Getting the following error: Error: An error occurred logging on to the system using single sign-on. Please contact your administrator: Error: 2067 - You do not have access

  • Cannot Find Symbol

    Ok, I'm trying to make a program that when "java-ed" it opens another randomly selected file. When i try to javac the file, it tells me that it doesn't recognize some of the symbols. access.java:6: cannot find symbol symbol : variable hello location: