Satellite M70-164 PSM71E - SD Secure Module does not work

My laptop was installed in all new
Currently have Windows XP Professional with SP3
I can not install the SD Secure Module
They can help me.
Thank you

Hi
The SD Secure Module version 1.0.2; this software is an *update* for your TOSHIBA Secure Digital-Host controller.
So you have to install firstly the Cardbus Driver 2.0.0.1.
Cheers

Similar Messages

FP TC 120 module does not work

I have a FP-TC-120 module connected to a FP-1600 Ethernet module. But the software FieldPoint Explorer seems not to recognize it. It recognizes my FP-1600 module, and a FP-AI-110 module also connected. The FP-TC-120 power LED keeps flashing frequently, and the Ready LED does not light. What can be happening? I have tried everything, but it does not work at all.

Actually, technically, the FP-TC-120 module does not have a STATUS LED. Network modules have STATUS LED's that will flash a number of times, pause, and flash again but I/O modules do not. All I/O modules have Power and Ready LED's and some I/O modules have additional LED's.
The FP-TC-120 has an LED on each channel to indicated Open Thermocouple detection. In an I/O module, a Power LED that is failing to turn on wil typically signify that one or more components in the system is damaged. The most typical example would be bent pins between the terminal bases or between the I/O module and the terminal base. Alternatively, some forms of damage to the I/O module could also conceivably cause this sort of failure mode. In any case, once the faulty component
is isolated (terminal base or module), it will probably need to be sent to National Instruments for repair.
Regards,
Aaron

Satellite P20: Fn+F5 and TV-button does not work

Satellite P20, Windows XP SP2 keyboard problem.
When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
How to repair this problem?

Hello
Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
I hope it will help. If not please write again.

Satellite L300D-202: Restore using Recovery disk does not work

Good Afternoon,
Wonder if anyone can shed some light on the following error message I get when trying to restore my laptop...
"Setting access permissions V:\HDDRecovery...
V:\HDDRecovery The system cannot find the file specified
Unpack WinRE...
ImageX Tool for Windows
Copyright Blah.....
Error Opening file [V:\HDDRecovery\SWImg\06546XSP.svml
ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm Index 1 from HDD to W:!
Press any key to continue..."
After this I am left with the Toshiba recovery software running with no action and an Active DOS screen but nothing happening...
I'm guessing HD fault, Recovery media received today from Toshiba for this system
Laptop is:
Satellite L300D 202
NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
All help much appreciated,
Thanks in advance,
Rick0684

> NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
Hmm... for me it looks like the notebook does not boot from the disk (DVD) but it tries to boot from the HDD....
Anyway, did you try to boot from another disks; for example Win XP, Linux Live CD?
Do this and check if this is possible... if yes, format the HDD and try to boot from the recovery disk again!
PS: Did you try an HDD recovery option?
Power up the unit, press F8 and in choose Repair my Computer
After that choose Toshiba HDD recovery option if possible.

Jaas Login module does not work

Hello,
I am developing simple web application wich uses jaas for authentication, but something strange happens, i have written security information in my web.xml:
<security-constraint>
          <web-resource-collection>
               <web-resource-name>simple</web-resource-name>
               <url-pattern>/security/*</url-pattern>
          </web-resource-collection>
          <auth-constraint>
               <role-name>admin</role-name>
          </auth-constraint>
     </security-constraint>
     <login-config>
          <auth-method>FORM</auth-method>
          <form-login-config>
               <form-login-page>/login.seam</form-login-page>
               <form-error-page>/login.seam</form-error-page>
          </form-login-config>
     </login-config>
     <security-role>
          <role-name>admin</role-name>
     </security-role>my login module looks like this:
package com.auth.security;
public class SimpleLoginModule implements LoginModule {
     // initial state
     private Subject subject;
     private CallbackHandler callbackHandler;
     private Map sharedState;
     private Map options;
     // the authentication status
     private boolean succeeded = false;
     private boolean commitSucceeded = false;
     // login info
     private static final String[] userNames = { "admin", "guest", "user1", "user2" };
     private static final String[] passwords = { "admin", "sesame", "pass1", "pass2" };
     // current user
     private String username;
     private char[] password;
     // user's principal object
     private SimplePrincipal userPrincipal;
     public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options) {
          System.out.println("INITIALIZE");
          this.subject = subject;
          this.callbackHandler = callbackHandler;
          this.sharedState = sharedState;
          this.options = options;
     }// end initialize()
          public boolean login() throws LoginException {
          System.out.println("LOGIN");
          // prompt for a user name and password
          if (callbackHandler == null)
               throw new LoginException("Error: no CallbackHandler available " + "to garner authentication information from the user");
          Callback[] callbacks = new Callback[2];
          callbacks[0] = new NameCallback("\nuser name: ");
          callbacks[1] = new PasswordCallback("password: ", false);
          try {
               callbackHandler.handle(callbacks);
               username = ((NameCallback) callbacks[0]).getName();
               char[] tmpPassword = ((PasswordCallback) callbacks[1]).getPassword();
               if (tmpPassword == null) // treat a NULL password as an empty
                    // password
                    tmpPassword = new char[0];
               password = new char[tmpPassword.length];
               System.arraycopy(tmpPassword, 0, password, 0, tmpPassword.length);
               ((PasswordCallback) callbacks[1]).clearPassword();
          } catch (java.io.IOException ioe) {
               throw new LoginException(ioe.toString());
          } catch (UnsupportedCallbackException uce) {
               throw new LoginException("Error: " + uce.getCallback().toString() + " not available to authenticate user.");
          boolean usernameCorrect = false;
          boolean passwordCorrect = false;
          String passwordString = new String(password);
          for (int x = 0; x < userNames.length; x++) {
               if (username.equals(userNames[x]))
                    usernameCorrect = true;
               if (usernameCorrect && passwordString.equals(passwords[x])) {
                    // authentication succeeded!!!
                    passwordCorrect = true;
                    succeeded = true;
                    break;
               } else {
                    // authentication failed -- clean out state
                    succeeded = false;
                    usernameCorrect = false;
               }// end if/else
          }// end for( int x = 0; x < userNames.length; x++ )
          return succeeded;
     }// end login()
     public boolean commit() throws LoginException {
          System.out.println("COMMIT");
          if (!succeeded) {
               return false;
          } else {
               // add a Principal (authenticated identity)
               // to the Subject
               // assume the user we authenticated is the SimplePrincipal
               userPrincipal = new SimplePrincipal(username);
               if (!subject.getPrincipals().contains(userPrincipal))
                    subject.getPrincipals().add(userPrincipal);
               // in any case, clean out state
               username = null;
               password = null;
               commitSucceeded = true;
               return true;
          }// end if( succeeded == false )
     }// end commit()
     public boolean abort() throws LoginException {
          System.out.println("ABORT");
          if (succeeded == false) {
               return false;
          } else if (succeeded == true && commitSucceeded == false) {
               // login succeeded but overall authentication failed
               succeeded = false;
               username = null;
               if (password != null)
                    password = null;
               userPrincipal = null;
          } else {
               // overall authentication succeeded and commit succeeded,
               // but someone else's commit failed
               logout();
          }// end if/else
          return true;
     public boolean logout() throws LoginException {
          System.out.println("LOGOUT");
          subject.getPrincipals().remove(userPrincipal);
          succeeded = false;
          succeeded = commitSucceeded;
          username = null;
          if (password != null)
               password = null;
          userPrincipal = null;
          return true;
}I am using Jboss-4.2.3.GA and configured login-config.xml like this:
    <application-policy name="simpleLoginModule">
     <authentication>
      <login-module code="com.security.auth.simpleLoginModule" flag="required">
      </login-module>
     </authentication>
    </application-policy>I have jboss-web.xml also correctly configured.
The problem is that when i type correct username/password happens the error:
HTTP Status 403 - Access to the requested resource has been denied
So can anyone help me? What i have to change/modify in my loginmodule java code?

Hi,
no need to change the authschemes.xml file when you don't know if your code works (you can perfectly break logon to other applications when doing so).
Configure your application to use declarative authentication; this is done in the web.xml of the application:
http://help.sap.com/SAPhelp_nw70/helpdata/en/08/0f0e4d1ffece4d8b9c5b84793aac50/content.htm
http://help.sap.com/SAPhelp_nw70/helpdata/en/40/97ffdb74939747b402b0200780cab5/content.htm
http://help.sap.com/SAPhelp_nw70/helpdata/en/b9/9482887ddb3e47bd1a738c3e900195/content.htm
example:
     <login-config>
          <auth-method>FORM</auth-method>
          <realm-name>REALM</realm-name>
          <form-login-config>
               <form-login-page>logon.jsp</form-login-page>
               <form-error-page>error.jsp</form-error-page>
          </form-login-config>
     </login-config>
With declarative authentication the AS Java will use the logon modules you confired in the VA for the application.
br,
Tobias

Custom Login Module Does Not Work

Hello,
Can someone give me some suggestions on what I should look at to fix the following error. I created jaas custom login module. Within the module I authenticate against an active directory. I've put many trace statements throughout the login module code. So I can actually follow everystep of the way through the login process. The user authenticates correctly and in the commit() method of the login module, the security principal is created and added to the principals and true is returned from the method. Everything looks like it worked correctly... but the user doesn't actually get into the portal. The login screen is redisplayed. This login module is the only login module in the stack being used to authenticate. According to the tracing, everything should of worked. Does anyone have any suggestions on what I should look at?
thanks,
Keith
NW04 SP14

Marcel,
The reason we are using a custom login is we want to handle different situations when logging in, for example, if a password is expired we re-direct to a change password page that allows the user to update their password.
In our EP6 sp2 environment, this is working. I then recoded the login module so it would work in NW04, be we are having no luck.
Here is the weird thing, it works on some userid's but not on others. For example, with a userid like "kjanks" it works fine. But with a userid like "t.portal08" it fails, then your back at the login screen with the userid field displaying the userid, but the password field is empty. You can then click the login button again without doing anything else and then it works and you get in the portal. So it seems like the "." in the one userid is causing trouble.
Any Ideas?
thanks,
Keith

Internet Security Suite does not work with Vista 64 bit

After attempting to use the Chat Help, twice, and spending hours in queue before getting kicked off, I finally called Support to find out why my new Vista computer was not running the Internet Security Suite that I downloaded. Yes, I found the link to "download to a second computer" and went thru all the steps. Got lots of positive feedback: little bars were filling in letting me know I was 40%, 72%, 100% done, etc.. Was given a window allowing me to Run or Don't Run the software. It all seemed to go very well. However, when the "download and installation" was complete, there was no new software running anywhere on my computer. Couldn't find it in the Control Panel, the Start menu, or the system tray. Called Support and spent at least 30 minutes on the phone with a "technician" (and I use that term VERY loosely) who had to have major assistance from a co-worker before he could even start screen-sharing with me and, during the course of our time together, made the following brilliant remarks:
Upon seeing my desktop wallpaper (which is a lovely photo of some cliffs and a lake - and it came with Vista), he wanted to know what the picture was. Not where it was taken, but just what it was. His exact comment was "Does your screen always look like that?". I had to dig deeper to determine if he was asking about a particular icon or some other computer related concern that he saw (he was "technical support", after all), but he was just asking about the stupid photo.
He couldn't find the Control Panel in the Start Menu until after trying several times, and then he couldn't navigate to the Programs area very well (I had to give verbal hints as to where it was), and his brilliant comment then was "I really need to go to my mom's house and get on her new laptop and try out Vista." Can you believe that Verizon has technical support folks who have never used Vista? It's not like Vista just came on the market yesterday!!
So, when he finally decided that he was not going to be able to help me, he didn't offer me any other recourse. He just stated over and over that he was not sure how to solve this issue. Oh, and this was after I re-downloaded ISS (again, "successfully"). I had to ask if there was someone else there who could possibly help me. He offered to put me on hold (for the 2nd or 3rd time at this point) to check around. When he returned to the phone, it was obvious that someone else was operating the mouse in the screen sharing mode because the operator moved confidentially around the screen and went immediately to system properties and saw that I am running Windows 64 bit. The other operator then told my guy to tell me that ISS only works with Windows 32 bit. Their final resolution was that I should call billing on Monday and end my subscription. I think that may be the only good advice I was given that day.
So, am probably going to renew my trial version of Norton on this new computer and remove ISS from the laptop and put Norton on there as well. Apparently, they are up to date with this fancy new technology. At least they probably know about sophisticated and highly technical stuff like desktop wallpaper.

I have been trying to get somewhere with this Internet Security Suite...and now have come to the conclusion this is not going to work. Now running Vista 64 bit, and have gotten nothing but the run around to try to complete the downloading of the program. I've contacted Verizon Tech Support...then tell me that this works with the 64 bit but I need to contact Windows as there is a glitch and they give you the steps to get thru it. Windows advises me to contact Verizon again as there are no problems with the OS. Also have contacted Radialpoint and once again nothing...Obviously the Secuirty is not compatible with Vista 64 bit yet, which I just can't believe like you said...it's not like it was just yesterday this OS came out. My frusteration comes from nobody steps up to take any responsibility as to what the problem is. If it is not compatible yet then say so and not waste my whole weekend trying to get a straight answer. I have other computers that I am currently using the service on and do like the program, but as for my Vista 64 bit looks like I may go to Macafee for protection. It just amazes me as big as Verizon is and as popular this Vista has become they are not on the ball in keeping up with technology.

TP8's Ericsson module does not work after update to win10 & two more unknown devices

So after update I installed: Intel Platform Device Driver, DPR Util, Ericsson driver (just as I did on win8) but have no luck! And I tried to insert working sim but no effect. Please help. http://i.imgur.com/eVgRkks.png?1 (See Device Manager: blue highlighted is possible Ericsson module)

to correct bad spelling:
a) What to do to get the imac sending WIFI out again?

Satellite P500/024: NUM LOCK & ECO button does not work

Hi,
The Numlock keyboard has stoped working and does nothing since windows 7 upgrade, i can toggle the numlock button but this does nothing i have searched the forum and a bios update is reccomended but toshiba australia dont provide one on their site
also the "eco button" has done the same, i have both the TVAP and Eco programms installed and they are both the latest release.
Has anyone got any ideas, the full part number is PSPE8A-024008
Thanks

Please follow the thread which you have already created here in the forum:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182178

Satellite Pro C855-1TC boot error - backup does not work

Hi
My laptop went curput 2 days after I done a back up.
Came up with an error code: oxc00000f
I tried using the backup disk but ask to delete all on hardisk which i didn't
I have all my photo's etc on there,
I tried all the other options. It says came up were windows is installed the drive is locked and unlock and try again. How do you unlock?
Also the laptop was preinstalled. The laptop didn't come with the disk
How do you find your product key code?
Its not on a label on the laptop. Just Windows 8 home sticker,
Typicaly, warranty run out month before grrr.
I can borrow a friends windows 8 disk but I need my key no so frustrating
Im no techno fob just need advise please.
Thanks amanda

The laptop did not come with any disks because there was a possibility to create own recovery medium (USB or Disk) using the preinstalled software called Toshiba Recovery Medium Creator.
If you dont have such disk, you order this here:
http://backupmedia.toshiba.eu/landing.aspx
Now back to your issue:
Press power button and then F12
Now you should see some bootable devices. Last option is HDD Recovery.
Check if you could recover the notebook using the HDD recovery option.
Regarding the images on your disk.
Well, its possible to remove the HDD and to connect this HDD to another computer using external USB-SATA caddy. This allows you to move the pictures to another computer.
Note: this needs to be done before running the HDD recovery process.

Secure trash does not work in deleting a folder

I downloaded a file with MAC Games and it is hidden in 2 folders - first folder name is 40 games for Mac - when i click on it second folder is called Program Files - click on that and it opens a folder with games that says cannot play using the version of operating system i have Panther OSX 10.3 and if i want to switch to classic
I do not want to see this folder in my trash can anymore - can someone help in removing this once and for all
thanks

Hello Edward:
This knowledge base article
http://docs.info.apple.com/article.html?artnum=106272
will help you empty the stubborn trash.
Barry

FM LDB_PROCESS with PNP or PNPCE does not work...

This is the code. This do nothing, no errors, no results.(The system have employees.)Please help with some advice.
José.
TABLES: PERNR.
TYPE-POOLS: RSDS, RSFS.
DATA: CALLBACK TYPE TABLE OF LDBCB,
      CALLBACK_WA LIKE LINE OF CALLBACK.
DATA: SELTAB TYPE TABLE OF RSPARAMS,
      SELTAB_WA LIKE LINE OF SELTAB.
DATA: TEXPR TYPE RSDS_TEXPR,
      FSEL TYPE RSFS_FIELDS.
Refresh: Callback.
Clear: Callback.
CALLBACK_WA-LDBNODE     = 'PERNR'.
CALLBACK_WA-GET         = 'X'.
*CALLBACK_WA-GET_LATE    = ' '.
CALLBACK_WA-CB_PROG     = SY-REPID.
CALLBACK_WA-CB_FORM     = 'PROG_PERNR'.
APPEND CALLBACK_WA TO CALLBACK.
Refresh: Seltab.
Clear: Seltab.
SELTAB_WA-SELNAME = 'PERNR'.
SELTAB_WA-SIGN    = 'I'.
SELTAB_WA-KIND    = 'P'.
SELTAB_WA-OPTION = 'EQ'.
CLEAR SELTAB_WA-LOW.
CLEAR SELTAB_WA-HIGH.
APPEND SELTAB_WA TO SELTAB.
Refresh: TEXPR, FSEL.
Clear: TEXPR, FSEL.
CALL FUNCTION 'LDB_PROCESS'
EXPORTING
    LDBNAME                     = 'PNP'
    EXPRESSIONS                 = TEXPR[]
    FIELD_SELECTION             = FSEL[]
TABLES
    CALLBACK                    = CALLBACK
    SELECTIONS                  = SELTAB
EXCEPTIONS
    LDB_NOT_REENTRANT           = 1
    LDB_INCORRECT               = 2
    LDB_ALREADY_RUNNING         = 3
    LDB_ERROR                   = 4
    LDB_SELECTIONS_ERROR        = 5
    LDB_SELECTIONS_NOT_ACCEPTED = 6
    VARIANT_NOT_EXISTENT        = 7
    VARIANT_OBSOLETE            = 8
    VARIANT_ERROR               = 9
    FREE_SELECTIONS_ERROR       = 10
    CALLBACK_NO_EVENT           = 11
    CALLBACK_NODE_DUPLICATE     = 12
    OTHERS                      = 13.
   case sy-subrc.
      when 1. raise ldb_not_reentrant.
      when 2. raise ldb_incorrect.
      when 3. raise ldb_already_running.
      when 4. raise ldb_error.
      when 5. raise ldb_selections_error.
      when 6. raise ldb_selections_not_accepted.
      when 7. raise variant_not_existent.
      when 8. raise variant_obsolete.
      when 9. raise variant_error.
      when 10. raise free_selections_error.
      when 11. raise callback_no_event.
      when 12. raise callback_node_duplicate.
    endcase.
if sy-subrc ne 0.
      message id sy-msgid type sy-msgty number sy-msgno
           with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*&      Form PROG_PERNR
*       text
*      -->NAME       text
*      -->WA         text
*      -->EVT        text
*      -->CHECK      text
FORM PROG_PERNR USING NAME TYPE LDBN-LDBNODE
                      WA    TYPE PERNR
                      EVT   TYPE C
                      CHECK TYPE C.
    message id sy-msgid type sy-msgty number sy-msgno
           with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
CASE EVT.
    WHEN 'G'.
      WRITE: / WA-PERNR.
      ULINE.
    WHEN 'L'.
ENDCASE.
ENDFORM.                    "PROG_PERNR

Yes, this is the best way of fill out these tables. But my problem is different, I'm trying to get the infotypes info through a BADI or function module.
I received a response from SAP about how to resolve this issue. I need to use the old way:
SUBMIT...RETURN to call another report with the PNP/PNPCE Logical Database.
That's the reason for use the LDB_PROCESS function module. (SUBMIT...RETURN uses too many memory and processor resources) Now I know that this function module does not work with HR Logical Databases because the Infotypes structures.
Thank you by your quick reponse.
José

Satellite M70-181: Wlan does not work

Hello,
I am in New Zealand at the moment and a couple of weeks ago I changed my bios password but forgot it. To solve that problem I send the laptop to Toshiba in Christchurch and they reseted it for me. But since that day my wireless does not work. When I turn it on not even the light goes on. It's not shown in any of the normal places (as in the network enviroment or how ever you call it).
Could it be any problem with the hardware and is it easy to fix by myself cause I don't have the time to wait till they do it in Christchurch again.
Thanks for any answers

They might have damaged wifi card antenna inside you computer. If you have technical skills you could fix it by yourself, but if you don't just send the laptop back, and let them check it again.

Satellite L300 (PSLB8C-0H901X) does not work

My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no POST, nothing, Get power and charge lamp when pluged in nothing else, any known issues? Any fixes, Thanks in advance for your help.

Hmm sounds like a serious hardware issue.
If you are a lucky man the issue could be related to RAM module.
The RAM modules can be replaced easily. The memory bay is placed at the bottom of the unit secured by one screw.
But the question is if its really related to RAM.
Well, you will know this if you would replace/check this
Otherwise I recommend asking an professional notebook technician for a help

Error in ERM: Function module does not exist

Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AM

Log extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Satellite M70-164 PSM71E - SD Secure Module does not work

Similar Messages

Maybe you are looking for