Satellite M70-193: How to complete the drivers download list?
Hi, I am trying to clean install XP Pro. On my m70-193 (done), but I was stuck in some of the drivers required to complete the installation. I downloaded all the drivers in toshiba for my machine(65 driver) but I can't fined the rest of them (almost 25 driver) would you please advice ?
Thank you in advance
Musa
Without precise notebook hardware status list it is not possible to say what are you missing. Maybe you dont missing drivers but some tools and utilities.
I recommend you to download Installations instructions documents and install all stuff using this installations order. Like you can see there are many Qfixes but you must not to install all of them. If you have time it is ok, if not be sure SP2 is preinstalled and after first start Windows update using Internet explorer. All missing stuff will be installed automatically.
Bye
Similar Messages
-
i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?
How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual. -
I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?
See... Updating to iOS 5
http://support.apple.com/kb/HT4972
If you are using windows...
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT -
How to get the drivers for Dell PowerEdge M620 in INF format?
How to get the drivers for Dell PowerEdge M620.
We tried downloading
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-m620/drivers but they are in exe?
How to get inf files for those?As Jason pointed out, they can be extracted, I believe this can be done with 7zip also... Or you can just install one M620 from scratch, install the Dell drivers and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to grab the drivers in .inf format. -
How to hold the value in List box.
Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
RakeshHi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
if list[] is initial.
perform SHP_COND.
endif.
form SHP_COND .
*DATA: SHOP(80).
clear : GT_VSBED, list.
refresh : GT_VSBED, list.
select vsbed
from knvv AS K
into table GT_VSBED
where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
and K~vtweg = vbak-vtweg
and K~spart = vbak-spart.
select VSBED vtext
from TVSBT
into table list
for all entries in GT_VSBED
where spras = sy-langu
and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = NAME
values = LIST[]
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " SHP_COND
Thanks,
Rakesh -
Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
How to restrict the st loc list applicable to particular plant mm01
Hi,
While creating material master user after selecting a particular plant user sees all the storage locations available in the system.How to restrict the storage location list applicable to particular plant while material creation
Best Regards,
BMHi,
As Mahesh said , you need to put validation there, please contact your development team for this.
Though you are able to see all storgae location you are not able to create the material master, it throws as error if you select incorrect storage location which is not maintained for that particulare plant.
It gives an error message
Entry Plant SL does not exist in T001L (check entry)
So user will not be able to create material master for improper plant SL combination.
Thanks,
Ravi -
How is the "Top Downloads" list calculated?
Does any one know how the "Top Downloads" on the iTunes U site is determined? The "Top Downloads" list has some correspondence with our weekly iTunes U report (I'm looking at the "Tracks" sheet in the report), but they're not nearly identical.
I don't know how "Top Downloads" is calculated exactly, so this is just a guess…
iTunes U usage data is held for the last sixty days. This corresponds to 8 weeks and 4 days. The weekly usage stats spreadsheets, on the other hand, go back just 4 weeks. In other words, if you request it, Apple can tell you what was going on with your site 60 days ago…even though the spreadsheet you get "this week" will only show activity for the past month. The admin guide also hints that "Top Downloads" is re-calculated one or more times each day, likely using the past 60 days' data. -
How to see the To do List on the iCal in the iPad
Hi! Does anyone know how to see the To do List on the iCal in the iPad?
I've bought some applications from Itunes (Bento, Iwork..) and none of them allow me to see my calendar and the To do list on the same screen
Thanks!!I assume iPad is in the same boat as the iPhone, which has been discussed here:
http://discussions.apple.com/thread.jspa?threadID=1936638
In short, you can't. -
How to reconstruct the missing parts list (co24)
Dear All
How to reconstruct the missing parts list (co24).by using report PPCOXPR1.?
Rgds
Pankaj AgarwalHi Pankaj,
You need to run the program "PPCOXPR1" using SE38. This program will create missing part index in RESB table.
Hope this helps you, Reward your points.
Regards,
Prasobh -
How to access the stored password list of N9 nativ...
How to access the stored password list of N9 native browser?
most everything should be listed here.
there was a way to see the website data and stored information, but not the passwords. they were ************
you were only able to delete the login information, and unfortunately, since i have not used the device in so long, have forgotten the language.
so you will have to dig a bit.
it was a command that you would enter into the browser address bar.
if it comes to me i will repost, but for now...check here.
http://talk.maemo.org/showpost.php?p=1104892&postcount=1 -
How to change the drop down list "Category" in the Risk page (PWA 2013)
Hello,
How to change the drop down list "Category" in the Risk page of a Project Site. I need to change the list of elements.
ThanksHi Robert,
You actually cannot edit the current template.
The process is as follow:
create a brand new project site from the existing template,
edit the site configuration (list, column, webparts, image, logo, theme...),
save it as a template,
associate it to an EPT.
See reference below:
http://blogs.msdn.com/b/brismith/archive/2010/03/15/customizing-the-project-site-in-project-server-2010.aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
I can't seem to get the drivers downloaded on my windows laptop for my iphone 5s, the info is coming up generic and im getting a code 1. Please help
All necessary drivers are included in the iTunes install package.
Please clarify exactly what the problem is.
the info is coming up generic and im getting a code 1
That's not very informative. -
THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)
Maybe you are looking for
-
Has Access Manager yet added the ability to do "form memory" for easy SSO integration to applications performing form based authentication. This is a feature found in products such as Netegrity Siteminder and CA's stuff. This is easier for legacy app
-
Plz give me work flow of film editing in Final Cut Pro..
Hello Everyone... I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro . I want know the work flow of f
-
Dear Team, Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to
-
When I open firefox first thing it opens but the home page is not working. So I have to re-install it. Then it is ok for the rest of the day but only to go down again the following day. What can I do to stop this happening? I use bt.com home page.
-
Can the message pane be moved above the preview pane in lion mail?