Satellite M70-394: WLan does not work after wake up from standby

Hi all....
I have a problem with my WLan connection and hope one of you may be able to help. Starting my computer from off there isn't a problem with the WIFI connection but if I put the computer into standby by closing the lid and then restarting it from there the light comes on briefly for wi fi but then goes off and the only way I can connect is through a cable.
Any suggestions would be gratefully appreciated.

Hi
I have read in the forum that some similar "Wlan standby" issues were fixed by BIOS update.
I think you should compare the BIOS version on the notebook with the BIOS which is available on the website. If there is a new update try to upgrade it
Be sure that you have chosen the right BIOS.

Similar Messages

Satellite M70-181: Wlan does not work

Hello,
I am in New Zealand at the moment and a couple of weeks ago I changed my bios password but forgot it. To solve that problem I send the laptop to Toshiba in Christchurch and they reseted it for me. But since that day my wireless does not work. When I turn it on not even the light goes on. It's not shown in any of the normal places (as in the network enviroment or how ever you call it).
Could it be any problem with the hardware and is it easy to fix by myself cause I don't have the time to wait till they do it in Christchurch again.
Thanks for any answers

They might have damaged wifi card antenna inside you computer. If you have technical skills you could fix it by yourself, but if you don't just send the laptop back, and let them check it again.

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

Wireless keyboard does not work after waking up from idle

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Tecra S3 - Wlan does not work after Win XP installation

Hello everyone,
I have recently purchased a Tecra S3 PTS30E-0TL059GH without operating system.
I've installed WIndows XP professional.
Everything works, except for the wireless lan. I can switch it on, but it doesn't seem to find the right drivers.
The device manager states problems with the networkcontroller and two other unknown devices.
I've installed all drivers from the toshiba website, but it still won't work.
Any help is appreciated!
Thanks!

Hi
I think the notebook supports INTEL 802.11 B/G WLan card but I'm not 100% sure about that...
In my opinion you should try to identify the WLan module.
How to do that?
In such case the usage of the PCI database should be very helpful.
More details here:
[How to identify an unknown device (e.g. Wireless LAN module)?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]
Knowing the exact WLan specs, it should not be a big deal to get the right driver.

Satellite L870-165 does not work after being repaired by their service

Laptop Toshiba warranty does not work after being repaired by their service twice.
Model: Satellite L870-165
Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
After reboot still happening the same.
I called Toshiba phone incident and after trying several options I said take him to repair the service.
They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

>Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
This message pops up because the notebook cannot find the Windows system.
There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
You said that the service agent changed the HDD. But did someone install the Windows system?
You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Satellite M70-394: WLan does not work after wake up from standby

Similar Messages

Maybe you are looking for