Satellite M70: accessing data of temperature and fan

While we hadn't such problems with other laptops, we didn't find a way of accessing the data of temperature and fan on a Satellite M70.
A friend tried this under Linux but didn't succeed and also with XP I don't find a way of reading the data (current temperature of CPU or state of fan-cooler).
Since I notice several irregularities while operating (fan is working though cpu-load is very minimal), working is sometimes going to be a bit uncomfortable.
thanx for hints / gw

I dont know if it will help you but in this posting someone has managed to run a hardware monitoring application.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14284
Possibly it will work on your notebook.
But in my knowledge Toshiba doesnt support such application and Im not sure it it will work.
Anyway, trying is for free ;)

Similar Messages

NOrmal Temperature and Fan Speed of MacBook Pro 13

Hi,what`s the Normal Temperature and Fan speed of MBP 13 during idle and when browsing or something?...please help..

The notional idle speed for the fan is 2000 rpm. If you turn it on you'll get about that and a temp of about 36 degrees in a cool room if you don't do anything. Opening a browser over wireless and say streaming a TV programme from the BBC will push the fan up to over 3000 rpm and the temp up to 60 degrees or so. Fan will drop to about 2400 rpm and temp to 53 degrees with gentle browsing.
Or that's what I get with a 2.53GHz 4GB memory machine. I took the 250GB disk out as it was noisy and put in a 120GB one that came from a Mac Mini so that may use a bit less power. (And the 2GHz Mac Mini has a rock solid 1500 rpm fan and rarely gets hotter than about 65 degrees - this has similar components to the Macbook Pro and so shows what a slightly bigger air access can do I guess).
The fan is rather faster and more noticeable than I was expecting with the Macbook, but the most noise came from the Toshiba disk which has now been banished to an external enclosure.

Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?

My desktop computer m9200T running Win7 Home Premium crashes often. It seems to be temperature related.
I had tried SpeedFan, but my computer crashed everytime I ran it. SpeedFan window scrolled 20 some lines of text than the computer crashed. Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?
This question was solved.
View Solution.

Hi,
Only have one temperature monitoring application running or you could end up with erroneous readings.
Try PC Wizzard. Depending on your hardware, you should see temperatures for CPU, GPU and disk. At the same site you can also try HW Monitor.
I am running a custom motherboard and it comes with its own software for this purpose. HW Monitor seems fairly complete.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Sun PCi II and Chip Temperature and Fan Speed

Dear All,
I have just installed a Sun PCi II card and am running it under Solaris 10 all seems to be working fine.
Looking at the environmental stuff in the BIOS revealed that the CPU Temperature is 94*C and the CPU Fan Speed is 0 RPM. Should I be worried ?
Do you think the fan has failed or is it just a bogus report. I would have thought if the chip got that hot the system would shutdown.
Thanks in advance,
Hugh

Dear All,
> I have just installed a Sun PCi II card and am
running it under Solaris 10 all seems to be working
fine.
>
> Looking at the environmental stuff in the BIOS
revealed that the CPU Temperature is 94*C and the CPU
Fan Speed is 0 RPM. Should I be worried ?
>
> Do you think the fan has failed or is it just a bogus
report. I would have thought if the chip got that
hot the system would shutdown.
>
> Thanks in advance,
> Hugh
Getting exactly the same CPU temperature and fan speed in a SunPCI II just installed in a Sun Blade 2000. Also noticed that the BIOS PC Health Status Page reports a Shutdown Temperature of 60 *C, i.e. the reported CPU Temperature is above the Shutdown Temperature but the system is still runing...
Not sure if the "micro cooler" device fitted over the CPU has a fan, or uses some other cooling technique.

Ultra 40 M2 core temperature and fan speed

Hi,
I'm using a Sun Ultra 40 M2 with two dual core AMD opterons 2218 running openSUSE 10.3. I have been trying to use lmsensors to monitor core temperature and fan speeds. It seems to be working and I have been able to use gkrellm as well.
At low load I get temperatures around 40C on all cores (as measured by k8temp-hwmon), and fan speeds of about 1500 (rpm?; as indicated by lm85-hwmon2/fan1 and lm85hwmon2/fan2; only two fans?). However, at full load all core temperatures go up to 70-75C (steady) and fan speeds increase up to 2500 (which does not seem to be the maximum speed of the fans, as they are much noisier at booting stages). I wonder if such an increase in temperature is normal and how can I setup the fans' speed, if at all possible.
Thanks,
Marcos.

I'm currently running dual 2222se chips, an fx3500, and a single samsung 15000 146gb with an idle temp of 40-42c. But, I've run into a problem. For some reason, when my system boots, the fans run through the BIOS checks, but after post, the fans stop entirely. I've gone into the BIOS and fiddled with a few of the settings, but haven't been able to rectify the problem. Is there a specific setting that I may need to change to get the fans to actually run after post?
I got this workstation used, so I was unable to get the tech support information I was looking for without paying an additional fee. So any help whatsoever would be MUCH appreciated.
ChinGimLeong, as far as your idle temp goes, that sounds about right for the setup that you're running. You may want to look into purchasing some thermal grease and cleaning your chips and totally reapplying the grease. Improper application can hinder the heat transfer, causing a bit of a high idle speed. But if you apply too much, you WILL fry your board and processors. Another thing that you may want to try would be adding an external ventilation source to help get a bit of faster airflow. I use an 8 inch desk fan, it adds a bit of extra noise, but noise is nothing when you're protecting your system.
Let me know what you think.

Temperature and Fan Speed Terminal HELP

So, I've been browsing the interwebs looking for a solution to my problem of monitoring temperature and fan speed within the OSX Terminal, while I do have a functioning way of determining them, it does require third party software that I personally would like a different way. Does anyone know of a command that I'm able to locate either of them? I know ioreg previously was able to locate these, but currently I can no longer grep my way through to locate any mention of them. If anyone has any ideas, please let me know!

You might consider the Ruby gem iStats. Ruby was updated in 10.9.3 to v2.0.0p451, and iStats does work with this version. This information is newer than on his github site.

Temperature and Fan Speed for 13inch i5

What is the normal temperature and fan speed of the early 2011 13inch MBP while using for a normal use (surfing the net, play music via itunes, movie via quicktime etc?
What is the highest/hottest temperature and fan speed of this MBP while using heavy load like photoshop CS5, playing games etc?
Thanks in advance!

Mine (13" i5) reaches 95C whilst watching hulu and browsing the web. Seems a tad high to me for what I am doing.
Hopefully you will get some more good answers.

Satellite C855 - Average CPU temperature and fan speed

Hello!
I've had this toshiba Satellite C855 since march this year. it's only recently that the CPU temp and Fan speeds have been worrying me.
When I'm not playing games or doing a livestream my CPU temp stays around 35-40% with the fanspeed at steady 50% or not on at all due to it been cool.
When I do play games however the fanspeed is going up to around 66-68% with the CPU been around 55-60%
I was wondering if this is normal? or do I need to clean it out by taking it apart. if it is the second option then I am worried since I do not want to damage anything inside. plus I am not that great with the inner workings of a computer.
Any help or information would be very appreciated thanks.

In my opinion there is no reason for panic. T is logic that under stress CPU activity is higher and CPU produces more heat. Notebook must be cooled down properly so sensors that control cooling fans register growing temperature and cooling fans will run on higher speed.
There is no reason for cleaning. And one day if that must be done please dont do it alone. You are not authorized for doing this.

Normal woring temperature and fan speed?

Hi,
I have installed vista x64 bit on macbook pro and have some questinos.
FIrst, can someone help mi to find keyboard shortcuts for turning on/off wireless network and bluetooth... if is this possible.
Second, I have installed "input remaper" that allow me to reconfigure some keyboard shortcuts, and it automatic control fans and monitor CPU tempereature. It is between 60-70c and fan speed is set on 2000 rpm minimum... Is it this ok, mean this temperature because machine is sometimes really hot....
Regards,
BA

I too have been wondering the same things. My temps are very high as well 68-69C for the GPU and 65-67C for the CPU cores when under Vista. I do not believe that Vista has any method to control the fans at all for the new unibody macbook and macbook pro models, at least that is the conclusion that I have been coming to myself. I have tried speedfan, riva tuner, coretemp, input remaper, and ati tool, all to no avail. Nothing knows how to properly access and control the fans for the laptop under Vista, and on top of that, the 9600 GPU is the one in use when under Vista, which means even more heat at idle. This really needs to get fixed with an update of bootcamp or a full driver release for vista.

Snow Leopard, iMac Temperature and Fans?

Since getting my iMac eighteen months ago I have checked the temperatures regularly.
Unfortunately I did not write them down and cannot remember what the highest "normal" temperature was, though the hottest place was always the "Power Supply Position 1".
One thing I am certain of is that I thought the 3 fans just had one set speed because every time I checked the Optical Drive was always around 699rpm and the HD and CPU fans were always 1199rpm.
Until a couple of weeks ago I had not updated the original OS which was 10.5.2, but then I updated to 10.5.8 in one go and last week I upgraded to Snow Leopard 10.6.1 by installing it over Leopard.
Today I was doing some simple editing in Final Cut Pro for an hour and checked the temperature.
The Power Supply Position 1 was 176 degrees F. I can't be sure but I have a feeling that I have never seen it above 169.
I then put a 20 minute video in Compressor to encode and the temperature rose to a maximum of 179.6 and the CPU fan was around 1500rpm which I have never seen before.
Has SL had any effect on temperatures or fan speeds?
Are these figures normal?
My room was only 66 degrees which is fairly cool.

Thanks K T and Pondini.
That's really what I was looking for Ikrupp, some figures from other users under moderately intensive operations (not writing emails!).
Yesterday, when I had finished using Compressor the temperature started dropping from almost 180°F and when it reached 176°F the fan had also dropped to 1199rpm so it looks as though it doesn't speed up until the temperature exceeds 176°F.
It appears that your figures are pretty close to mine. However, if others could give me figures they get under moderately intensive use, it would give me final confirmation that all is well (or not).

My MBP temperature and fan speed

Hi,
My problem is that my MBP seems to be getting rather hot (the F panel at the top, and underneath in particular).
I used to notice when I used skype video that the fans spun a little faster and it seemed to keep my MBP at reasonable temperatures. But recently its getting very hot (almost untouchable) and the fans aren't spinning faster to offput the higher temperatures.
I installed smcFanControl2 and it showed my fans running at 1000 rpm while my CPU temperature was about 62 degrees Celsius. I've looked around the forums here and most people seem to be reporting a normal idle speed of about 2000 rpm, so thats the first thing that struck me as odd, as I'm not even using any particularly CPU intensive apps. I used Activity Monitor to check.
I then used smcFanControl2 to up my fan speed to 4000, and it ducked underneath 50 degrees celsius, so I reduced the fan speed back to 2060 (couldn't select exactly 2000) and now its running at about 53 degrees (I'm running system profiler, console, skim, textedit, itunes, mail, and finder right now). This seems to be a much more normal temperature, and I can barely even hear the fans.
*Now my question:*(thanks for sticking with me so far): Shouldn't my MBP automatically have upped the fan speeds to keep my CPU temperature at a reasonable 50 degrees or so? Or is the cutoff point higher and I've just never noticed before? Also, is there a program (like smcFanControl2) perhaps that I can use to set a particular temperature I want to keep my MBP at and it will automatically set the fan speed to keep it at that temp?
NB, I recently swapped my 1 GB of Apple memory for 2 GB of Crucial memory. I'm assuming this might have bumped the temperatures up a little bit but I definitely found my MBP was warmer than usual even before the upgrade.
Thanks for any replies!

sternkanz,
In general, the upper operating limit for all Macbook Pros is in the 80-90 C range. In other words, the cut-off point is higher than you think, and you just haven't noticed it. The EFI firmware and PMU is designed to managed the fans such that 80-85 C is about as hot as the CPU gets, but of course, they (the fans) ramp up a bit earlier and slightly higher temps are not just possible, but common.
Adding the additional memory may be a contributing factor, but not by much. Certainly, having a second DIMM in place moves the heat being produced by the RAM (considerable, BTW) closer to the bottom of the Macbook Pro's case, and therefore adds to the heat you'll feel underneath. And, just having more RAM will marginally increase the amount of power your Macbook Pro uses; more power equals more heat.
In the end, this is all normal, and I don't see that you have anything to worry about.
Scott

Temperature and Fan speed? screen freeze

I Have 2011 MacBook Pro 13inch . I was having the screen freeze issue from a hot graphics card it cpu that so many others have with this year macbook. After a night of playing videos (not realizing it was in loop) connected to my hd tv using thunderbolt. After the first one it happened a few more time after playing any video for a few minutes. Screen freeze with little pixelated boxes, yellow or blue. After some research I reset SMC and seems sit of fixed it. I am not running SMC FAN AND Temperature Monitor apps and my fans run about 2000 all the time. When I get hit it speeds up but not to much, seems on point. Except when I play hd videos the system get gets to 75-80c . I still have not had the freeze but that's because I have temperature monitor to launch SMC fan set at max fan speed when it get a to 80 d
Degrees C. I'm wondering if anyone knows the safe temp the 2011 MacBook Pro should be running at When playing hd video. I know it gets hotter when playing hd video by without SMC it seems my fans don't kick on to max speed untill the MacBook reached about 85-90c. Once the fans max it cools it right away. I know the fans are working cause I hear them but should the fans kick on faster before it gets to that hot if a temp. And is it safe to play hd movies of its running at about 80-85c?
Thank you for any information you might have on safe and average temp and fan speeds. If anyone has a macbook pro please let me know when your playing hd video for about a half hour or more how hot your cpu is showing.

Macs have established a reputation for being inferior game machines. PC's dominate that area and if that is a high priority, I always recommend a PC.
Pauletronic wrote:
I'm happy to know that 85-90 is normal for video but my maCOBOL did almost fry my logic board from over Heating.
I doubt that you almost' fried' the logic board, but you may have approached thermal shutdown.
I also have a 2011 MBP and have run applications that are CPU/GPU intensive with no issues (the MBP certainly does heat up and gets very warm). I have never felt the need for a third party fan control.
If you wish to run games a lot, a cooling pad and a cool environment would help the situation.
Ciao.

Looking for OIDs for 2960s Temperature and Fan

Hi all
I'm looking for the OIDs for FAN, Temperature and Powerstate of each 2960s Switch in a Stack.
I can do a
show env switch 2
But were ist the OID für these "counters"
Thanks
Willem

Hi Ganesh.HThanks, this is what I was Looking forTemp:IOD: 1.3.6.1.4.1.9.9.13.1.3.1.3.1008 for the first Switch, 2008 for the second ...Return. Value CelciusFAN:IOD: 1.3.6.1.4.1.9.9.13.1.4.1.3.1007 for the first Switch, 2007 for the second ....return: 1= NormalPowersupply:OID: 1.3.6.1.4.1.9.9.13.1.5.1.3.1006 for the first Switch,1007 for the second .....return 1 = NormalWillem
Hi Willem,
That Great post has helped out ..it will be helpful if you can mark this thread has answered so that others get benifitted !!
Ganesh.H

Temperature and fan on T420

Hello everybody !
(I'm French, please escuse my English)
I have a T420 but it seems like it warm a bit since Lenovo change my motherboard (garranty).
With "Open Harware Manager" I can see the following temperature (just beeing on the internet) :
- CPU Core 1 : 47 (Max 68)
- CPU COre 2 : 46 (Max 68)
- CPU Package : 48 (Max 68)
- GPU Core : 44 (Max 47)
- Hard Drive (SSD) : 35 (Max 35)
I notice my fan is always running making some noise but I can't remember how it was before the intervention.
What do you think of these temperatures ?
Maybe I am interresting in changing my fan. I have a look at theese page :
http://support.lenovo.com/fr_FR/downloads/detail.page?DocID=PD008442
Do you know the difference bitween "fan assembly, integrated" and "Fan assembly, discrete" ? Sould I understand integreted fan + the metal conduction or with metal conduction or something else ?
Last question, do you what is the difference between 04W0407 and 04W0409 or 04W0408 and 04W0410 ? Can I take any of theese or not at all ?
Thank you very much for you help.
Have a nice day
Leirbmu

Welcome leirbmu
As long as the fan is still working without error message, replacing the fan is not required.
You could contact Tech Support to inform them that your machine is overheating after a motherboard replacement, they will either replace a fan with fresh thermal paste or they would help you to clean away existing thermal paste and put a new coat of it.
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10"
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

Satellite M70-190 - Program for diagnostics and WLAN

Toshiba Satellite M70-190.
What is the program and how it to establish?
Appeared in the right bottom corner of the monitor. In it there was computer diagnostics, a wireless network....
Help to restore it?

Im really wondering where you search for the drivers when you can find it for Vista only.
ConfigFree > HERE
All drivers, tools and utilities for your notebook you can find on Toshiba support page http://eu.computers.toshiba-europe.com > Support & Downloads.

Satellite M70: accessing data of temperature and fan

Similar Messages

Maybe you are looking for