Satellite M70 - Not all FN buttons available in Win Xp

Satellite M70
PM 750, 1G DDr2, ATi x700
I use XP + Vista, first I updated my BIOS to 5.10 under VISTA,
Fn works fine in vista. However, in XP only ESC+F1 ,F2 ,F3,F4, F10,F11,F12 work
Only F1 has a icon when I press LCD brightness, wifi, tounchpad on/off and Fn+space not working.
No change, no indicate icon?
Anyone had this problem before?

Hi
The FN buttons dont work on your notebook under Win XP because of the BIOS.
You have updated the BIOS which is designed especially for the Vista OS.
So you will be able to use the FN button in Vista but some single buttons will not work using the Win XP
There is also other BIOS (at this time 1.50) which was designed especially for the Win XP.
So if you are using both OS; XP and Vista, then you have to decide what OS has to support the FN buttons.
Regards

Similar Messages

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?

Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Field Explorer help, not all Database Fields available

Greetings all, I'm new to Crystal Reports (version XI by the way) and Tigerpaw. I've had some great luck editing existing reports to the specifications we've needed thus far. But now I've run into a real problem, it seems small, but it's important to me.
The one change I'm unable to accomplish on our new invoice report:
-Adding the Tigerpaw field, Account Name, to an invoice. The "Account Name" field is a field pulled from the tblAccounts Database Fields category in the Field Explorer. But when I'm in my invoice template, I do not have that category available, I only have tblSysListViewPrint and tvwr_Invoices categories, the latter does have the field for "Account ID" which is close for our purposes, but not the same. So how might I go in and pull from the tblAccounts category...specifically to get the tblAccounts.AccountName field. Copying that field from another existing report does not work either, "one or more formulas fail to compile".
I'm not sure how it decides what Database Fields to pull from, because on other reports, the tblAccounts category is available, but not the tvwr_Invoices category, so I am quite confusedl.
Hopefully this makes sense to someone out there.
Thanks.

Thanks, V361,
When I go to create a blank report, I get no databases available. My first prompt is the "Database Expert". The "available data sources" list is Current Connections (no items), Favorites (no items), History (no items), and Create New Connection. The "selected tables" list on the right is blank. I honestly don't have a clue how connect to whatever server contains those items. I realized since I first posted that I need to figure that out to make any progress. All the created reports already have the database field categories set up already, but it looks like all the available fields were not initially chosen for the reports.
So what I believe it comes down to is the fact that I need to figure out how to "Create New Connection" to find my available database fields.

Not all Typekit Fonts available in Muse?

Hello,
it seems that not all the fonts that are available in Typekit can be used in muse... has anyone a suggestion?

Hi grafiklieschen,
Abhishek is correct: you can only use and preview the free and open-source Typekit fonts in Muse. The full Typekit library isn't included in the font menu.
You can still use Typekit on your website, though; the fonts just won't show up in the Muse preview. The Muse Insider wrote a post on how to insert the Typekit embed code from the Muse interface:
http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
Or you can add the embed code to the Page Properties dialog within Muse, which will include it in the <head> of the page when you export your website.
We hope to have a more complete integration of Typekit with Muse in the future, but I can't say yet when that will be available.
I hope that this helps! Best,
-- liz

Service Desk - Expert Mode - Not all actions are available

Dear SAP colleagues,
I have just implemented the Service Desk in our SOLMAN system.
1. I choose Incident Management
2. I click on Queries
3. I click on a ticket (Transaction ID).
4. I edit the message
5. When I select Actions, I only have the 4 following options :
    - Send Message to SAP
    - Maintain SAP Logon Data
    - Display SAP Action Log
    - Update SAP Message
When I consult some demos, there are many differents options available in Actions menu, as, for example :
- Open System fro SAP
- Confirm Message to SAP
- E-Mail to Message Creator (Mail)
- Print Message
- Create Change Document
- Call Solution Manager Diagnostics.
Is it due to an missing authorizations (roles and profiles) ?
Thanks for your input.
Best regards
CP2009

Dear Rajeev,
First of all, thanks for your input.
I have choosen SIVA when I have activated BC Sets.
Should I activate also BC Sets for transaction type SLFN ?
1. I have started SPPFCADM and follow your recommandations.
2. I have choosen CRM_ORDER
3. I have then click on "Condition Configuration (Transportable Conditions)
4. There are many entries related to the Support and Service Desk
Example : Support Desk Message Action Profile
I have 5 actions defined -
Action 01 : Send Message to Processor
Action 02 : Create/Change Basis Message from CRM Procedure
Action 03 : Send Notification to SAP
Action 04 : Update Message from SAP
Action 05 : Confirm Message to SAP
I have activate BC Sets for transaction type SIVA, not for SLFN.
Best regards
CP2009

Satellite M70 not rebooting - HDD flash once

my m70 keeps freezing then having to shut down manually, then will not reboot, will flash on harddrive once and then nothing.

Try please to remove the battery and use just AC adaptor. Start the unit and check what happen. Can you enter BIOS settings?
Describe please what happen exactly.

Client Installing But Not All Components Are Available Post Install

Hi,
Now I am not positive how the posy client install process works but it seems the CM client normally installs and has only base components, then downloads a policy and installs the other components based on the policy?
I have 2 DP's that is PXE enabled. 1 DP works fine installing the CM client via task sequence on W7. What happens at the other DP is after the task sequence runs it seems like the CM client is stuck and won't install the additional components. The way you
can usually tell there is a problem with the CM client is there are only 6 of the 7 tabs present when you open the CM client and if you click on the Actions tab half the actions are missing. What logs should I be looking at to try and troubleshoot this?
Here is the policy agent log from the client that has the issues described above:
<![LOG[Processing PreShutdown event]LOG]!><time="16:39:11.202+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2832" file="policyevaluatorendpoint.cpp:1234">
<![LOG[Processing PostStartup event]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="1652" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="3000"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="1652" file="startuptask.cpp:113">
<![LOG[Not rerequesting policy on site code change in provisioning mode.]LOG]!><time="16:39:19.375+300" date="02-03-2015" component="PolicyAgent_ReRequestPolicy" context="" type="1" thread="2380"
file="rerequestpolicyendpoint.cpp:252">
<![LOG[Processing PostStartup event]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2396" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2236"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="2840" file="startuptask.cpp:113">
<![LOG[Processing PostStartup event]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2376" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2780"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="2776" file="startuptask.cpp:113">
<![LOG[Triggered update of user S-1-5-21-1078011946-2056399665-367356602-4899 settings]LOG]!><time="16:31:25.834+300" date="02-04-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="3176" file="policyevaluatorendpoint.cpp:1262">
<![LOG[Processing PostStartup event]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="3016" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2156"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="3016" file="startuptask.cpp:113">
<![LOG[Triggered update of user S-1-5-21-1078011946-2056399665-367356602-4899 settings]LOG]!><time="08:43:16.153+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="2152" file="policyevaluatorendpoint.cpp:1262">
<![LOG[Requesting Machine policy assignments]LOG]!><time="08:51:06.091+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2792" file="requestassignmentstask.cpp:1485">
<![LOG[Requesting Machine policy from authority 'SMS:MCT']LOG]!><time="08:51:06.091+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2792"
file="requestassignmentstask.cpp:1549">
<![LOG[Synchronous policy assignment request with correlation guid {2BC97ED8-61B2-4B0D-AE85-00DDC29EA652} for Machine XXXXX completed with status 80004005]LOG]!><time="08:51:06.597+300" date="02-05-2015" component="PolicyAgent_RequestAssignments"
context="" type="2" thread="2792" file="requestassignmentstask.cpp:1843">
<![LOG[Requesting User policy assignments for 'S-1-5-21-1078011946-2056399665-367356602-4899']LOG]!><time="08:51:15.233+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="4968" file="requestassignmentstask.cpp:1489">
<![LOG[Requesting User policy from authority 'SMS:MCT']LOG]!><time="08:51:15.249+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="4968" file="requestassignmentstask.cpp:1549">
<![LOG[Skipping request for user policy assignments due to agent configuration for authority 'SMS:MCT'.]LOG]!><time="08:51:15.249+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context=""
type="1" thread="4968" file="requestassignmentstask.cpp:1621">
TIA

Clients stuck in provisioning mode are usually due to unexpected reboots or unexpected state changes within the task sequence. Double reboots caused by a handful of software updates are a common culprit as of late. Really, the only way to troubleshoot
this is trial and error. Remove things from your TS and run it again to see if the client agent stays in provisioning mode or not. Start with the Install Software Update task.
Jason | http://blog.configmgrftw.com | @jasonsandys

Adobe Customization Wizard XI with Reader XI-not all options are available

I'm using the Adobe Reader XI redistributable (yes, I got the license and special download, etc.)
I've followed the Enterprise administration kit which makes me extract and build an AIP. All is well
What I notice is that the Customization Wizard has some options grayed out.
For example, the DOCS for the customization wizard say that I can fill out username, organization, etc.
But those are grayed out.
Also, I cannot select the Installation Options -> Remove previous version of Acrobat (it's grayed out). I can only select the Remove all versions of Reader.
Any idea why this is?
I point it to the AIP reader .MSI File when i built the customization kit.

You should post this on the Enterprise Deployment forum but the username, organization, etc... are for Acrobat only. The ability to uninstall Acrobat is for Acrobat only. It would be a bad thing for Reader to uninstall a more capable product like Acrobat Standard or Acrobat Pro no matter what the version.

ALL RADIO BUTTONS NOT SHOWING UP ON WEBSITES

WHEN I LOAD SOME WEB PAGES NOT ALL RADIO BUTTONS SHOW UP. HAVE TO SCROLL ALL OVER PAGE TO SEE IF ANYTHING SHOWS UP. IT HAPPENS ON A LOT OF SITES.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Not all iphoto pictures are available for sync with ipad2

Hallo,
I am a new apple user. Have iTunes latest version on my MacMini. Want to sync all of my photos from iPhoto to my iPad2. Problem: not all Photos are available for sync.
Why doesn´t iTunes see all of my Photos?
Thanks for answer.
Iceman21

It is not a problem of iPad2 because I have the same problem with my iPhone.
e.g.: I can see the event in iTunes but with 0 photos. So iTunes find the events but not the content???

Multimedia touch panel buttons on Satellite A500 are not all working

Hello,
I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corresponding function is not executed.
For example, the Eco button at the top doesn't switch on/off the eco and the mute button does not mute the volume.
Device manager shows all devices as working correctly.
There are no errors in the Event Viewer Application or System logs.
Please advise!
Thank you,

Hello
Try please to reinstall Toshiba value added package.
Remove preinstalled version, restart your notebook and install latest version from Toshiba download page.

Satellite M70 - Can I use all 2,5" HDDs?

Does all HDD 2.5" can be put into Satellite M70 or they have to have specific dimensions? For example i thin about Samsung spinpoint [this model|http://www.pricerunner.com/pl/36-765680/Hard-Drives/Samsung-SpinPoint-T166-320GB-SATAII-7200rpm-Compare-Prices].
Will it be OK for my laptop?

Hi!
As far as I know the Satellite M70 was available with SATA HDDs and IDE HDDs. If you have a SATA HDD, you can use this HDD.
The Satellite M70 supports only SATA150 (SATA1) but this is no problem. All SATA2 HDDs runs in SATA1 mode and are 100% compatible.
Bye

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

Satellite M70 - Not all FN buttons available in Win Xp

Similar Messages

Maybe you are looking for