Satellite MX35X: Atheros Client Utility cannot create or modify profiles

Atheros Client Ultility is all greyed out. Won't let me create or modify profiles. Under the Profile Management tab, eveyrthing is greyed out. Any ideas?
I'm trying to set up a wireless connection for my Satellite MX35x and have just switched isp's to AOL if that helps. I've tried updating the drivers and have also reinstalled the Client Utility from the recovery disc.
I'm stuck!

Hi Graeme
I dont use the Atheros Client Utility and I dont know exactly how it works but a similar issue happened on my notebook with different WLan connection tools.
I think all the options in the Atheros utility are grayed out because the WLan connection configuration will be done by Windows OS.
Therefore you should firstly check if the option Use Windows to configure my wireless network settings in the Wireless network connection properties was disabled. If not do it!

Similar Messages

  • Satellite P10-835, Instructions to connect to wifi using Atheros client utility?

    i have a P10-835 and need to configure the Atheros client utlitiy to connect to a Netgear 834G wireless router. Are there any instructions on how to configure the Atheros client?

    Hello
    1. START button > All Programs > Atheros > ACU > Atheros Client Utility
    2. 2. Select "Profile Management" tab an click on "New"
    3. Put the right Profile name and Network name
    4. Check Security tab and put the password if your network is encrypted
    5. Check also if the windows wireless configuration disabled it
    (IT MUST BE DISABLED if you use some client for wireless connection)
    You can find this option in Wireless Network Connection properties under Wireless networks.
    Bye

  • My firefox is running in the background, unvisible. It will not allow me to uninstall/ reinstall because it says it is running. I cannot create a new profile because it says that firefox is running? How do I fix this??

    I have tried restarting my computer, tried uninstalling, tried reinstalling but it always tells me that Firefox is open and running. When I select the task manager, there is no "firefox" under process. I have tried checking to make sure that the "read only" box is not checked under the profile properties. it seems like my only option now is to create a new profile. However, the profile manager won't even come up because it says firefox is running in the background. So frustrating!

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox version if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    You can force Firefox to create a new default profile if you remove the profiles.ini file.
    * http://kb.mozillazine.org/profiles.ini_file
    You can find that file here:
    C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\
    The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Firefox does not start in MacOS in 10.6.7. For some reason I cannot create a new profile as recommended (error message Error: Platform version '1.9.2.16' is not compatible with minVersion = 1.9.2.17 maxVersion = 1.9.2.17) further help only for windows

    tried to create new profile using Terminal but error message. cannot open in safe mode, instructions are only for windows All my bookmarks are in firefox

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • Cannot create a new profile on my 5800 after facto...

    Hi
    I did a search and find nothing related.
    I reseted my 5800 to factory settings, after that I'm not able to create new profiles.  I googled this and found that others have had the same issue but I didn't find a fix.
    When I go to create new profile the phone does nothing, after this I cannot even change the current profile until I exit profiles and enter again.  Try to create new profile again and can't do it.  If I keep trying the phone freezes
    Can you please help me?  Is there a fix for this or I won't be able to create new profiles?  What went wrong with the resetting to factory settings?
    Thanks for your help

    make a back up if you dont already have one, read those carefully and go down the list. the second option should sort it, and what profiles are you talking about? connectivity or user profile for phone, text, email stuff? 
     1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
    2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance. 
    Message Edited by radical24 on 27-Aug-2009 09:59 AM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • 10.5.6 windows cannot create server based profiles

    Hi @ all,
    at time i plan to migrate my 10.4.11 tiger to 10.5.6 leopard, this fileserver stores the user home and profiles for 40 Windows Users.
    I installed a new server with leopard 10.5.6 and tested the server if the user who are loggin into my OD gets his porfile and home from this server.
    Yes right, it won't work.
    Following is the setup
    Windows XP sp2 joined in the domain MYDOMAIN and gets his profile and home from filesrv1 (this setup works)
    filesrv3 with AFP/NFS/SMB
    smb standalone, identifiedy by NTLMv2 & Kerberos/NTLM/LAN-Manager, Latin 1(850), Use wins sever xxx.yyy.zzz.
    sharing a folder /Volumes/System/Users as Users with SMB guest access allowed and owner rights read&write
    sharing a folder /Volumes/System/Users/Profiles as Profiles wit SMB guest access allowed, strict locking, owner rights read&write
    Now setting in the WGM the home directory and the windows Profile to filesrv3 following appears
    By Logging in in Windows, windows says cannot load profile check you directory ... bla bla...
    The logs on my server says the following
    ....snip....
    ==> /Library/Logs/WindowsServices/log.smbd <==
    [2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
    brcheck1 (172.17.35.52) closed connection to service profiles
    [2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
    brcheck1 (172.17.35.52) closed connection to service vroni
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(319)
    checkntlmpassword: Authentication for user [] -> [] FAILED with error NTSTATUS_NO_SUCHUSER
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(309)
    checkntlmpassword: authentication for user [vroni] -> [vroni] -> [vroni] succeeded
    [2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:makeconnectionsnum(1087)
    brcheck1 (172.17.35.52) connect to service profiles initially as user vroni (uid=1033, gid=20) (pid 5310)
    [2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
    brcheck1 (172.17.35.52) closed connection to service profiles
    ....snip....
    In the profile folder the directory for this user is created but nothing more.
    The Home is mapped to V: after login but no profile is created or loaded.
    It seems the the samba cannot speack correctly with the LDAP.
    anyone knows somthing about this?

    This doesnt work for me either, I ended up setting the profile path to C:\Documents and Settings\shortname which is OK for me but I only have a few users and a handful of PC's.
    This results in proper authentication using OD, and a roaming profile that exists on the local XP computer. I map H: to my home directory and store everything there and I am done.
    When Roaming Profiles work properly Id like to implement them. But even then, because Id like to implement 'group policies' I need more and it seems hard to avoid a Windows server for profiles and policy management. I would prefer not to have any Windows admin machines.
    Angus

  • Cannot create or modify global parameters

    Hello,
    when I try to add global parameters, I can do so and they appear in the list in the global parameters dialog. When I close the dialog and open it again, the newly created parameter has vanished. Same for changes on existing parameters, the changes are not applied.
    What's the reason for that?
    Kind regards,
    Matthias

    Hi,
    these are the NW configurations:
    System XMT      
    Message Server
    Host:      xmtdb01a
    Port:      3900
    Enqueue Server
    Host:      xmtdb01a
    Port:      3200
    Database
    Name:      XMT
    Host:      xmtdb01a
    Type:      Oracle (Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production With the Partitioning and Data Mining options)
    Software Components      all components...
    Name      Version      Applied
    sap.com/SAP-JEECOR      7.00 SP15 (1000.7.00.15.0.20080216073628)      20080408151839
    sap.com/SAP-JEE      7.00 SP15 (1000.7.00.15.0.20080216073456)      20080408151802
    Instance JC01      All processes running
    Host:      xmtdb01a
    OS:      Linux (amd64) 2.6.5-7.244-smp
    dispatcher      Running
    VM      system properties...
    PID:      27981
    Name:      IBM J9SE VM
    Vendor:      IBM Corporation
    Version:      2.2
    VM Parameters
    Cluster
    Node ID:      17346800
    Kernel Version:      7.00 PatchLevel 110760.44
    HTTP Port:      50100
    HTTPS Port:      50101
    P4 Port:                      50104
    Telnet Port:      50108
    server0      Running
    VM      system properties...
    PID:      27982
    Name:      IBM J9SE VM
    Vendor:      IBM Corporation
    Version:      2.2
    VM Parameters
    Cluster
    Node ID:      17346850
    Kernel Version:      7.00 PatchLevel 110760.44
    SDM      Running
    VM       
    PID:      27983
    SDM Port:      50118
    Cheers,
    Matthias

  • 1100 with Local Radius Server problems Atheros Client

    I have Local authentication turned on for the 1100 and am using the Atheros Client Utility configuring LEAP with username/password and it is failing, here is the debug from the 1100.Any help much appreciated.
    Xcon-ap1100#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Xcon-ap1100(config)#radius
    Xcon-ap1100(config)#radius-server local
    Xcon-ap1100(config-radsrv)#no nas 10.201.1.5
    Xcon-ap1100(config-radsrv)#nas 10.201.1.5 key thiskey
    Xcon-ap1100(config-radsrv)#end
    Xcon-ap1100#debug radius
    Radius protocol debugging is on
    Radius protocol brief debugging is off
    Radius protocol verbose debugging is off
    Radius packet hex dump debugging is off
    Radius packet protocol debugging is on
    Radius packet retransmission debugging is off
    Radius server fail-over debugging is off
    Xcon-ap1100#term mon
    Xcon-ap1100#
    *Apr 3 16:26:26.961: RADIUS: AAA Unsupported [248] 10
    *Apr 3 16:26:26.961: RADIUS: 43 61 72 64 69 66 66 4E [CardiffN]
    *Apr 3 16:26:26.962: RADIUS: AAA Unsupported [150] 3
    *Apr 3 16:26:26.962: RADIUS: 32 [2]
    *Apr 3 16:26:26.962: RADIUS(000000FC): Storing nasport 246 in rad_db
    *Apr 3 16:26:26.962: RADIUS(000000FC): Config NAS IP: 10.201.1.5
    *Apr 3 16:26:26.963: RADIUS/ENCODE(000000FC): acct_session_id: 251
    *Apr 3 16:26:26.963: RADIUS(000000FC): Config NAS IP: 10.201.1.5
    *Apr 3 16:26:26.963: RADIUS(000000FC): sending
    *Apr 3 16:26:26.963: RADIUS(000000FC): Send Access-Request to 10.201.1.5:1645 id 21645/158, len 130
    *Apr 3 16:26:26.963: RADIUS: authenticator 74 20 7D 86 32 7B 1A 65 - 88 DE A7 58 51 91 FA 5D
    *Apr 3 16:26:26.963: RADIUS: User-Name [1] 6 "test"
    *Apr 3 16:26:26.964: RADIUS: Framed-MTU [12] 6 1400
    *Apr 3 16:26:26.964: RADIUS: Called-Station-Id [30] 16 "000f.f751.7970"
    *Apr 3 16:26:26.964: RADIUS: Calling-Station-Id [31] 16 "0090.963d.7bf6"
    *Apr 3 16:26:26.964: RADIUS: Service-Type [6] 6 Login [1]
    *Apr 3 16:26:26.965: RADIUS: Message-Authenticato[80] 18 *
    *Apr 3 16:26:26.965: RADIUS: EAP-Message [79] 11
    *Apr 3 16:26:26.965: RADIUS: 02 02 00 09 01 74 65 73 74 [?????test]
    *Apr 3 16:26:26.965: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
    *Apr 3 16:26:26.965: RADIUS: NAS-Port [5] 6 246
    *Apr 3 16:26:26.965: RADIUS: NAS-IP-Address [4] 6 10.201.1.5
    *Apr 3 16:26:26.965: RADIUS: Nas-Identifier [32] 13 "Xcon-ap1100"
    *Apr 3 16:26:31.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
    *Apr 3 16:26:36.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
    *Apr 3 16:26:41.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
    *Apr 3 16:26:46.965: RADIUS: No response from (10.201.1.5:1645,1646) for id 21645/158
    *Apr 3 16:26:46.965: RADIUS/DECODE: parse response no app start; FAIL
    *Apr 3 16:26:46.965: RADIUS/DECODE: parse response; FAIL
    *Apr 3 16:26:46.966: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed
    *Apr 3 16:26:50.070: RADIUS: AAA Unsupported [248] 10
    *Apr 3 16:26:50.070: RADIUS: 43 61 72 64 69 66 66 4E [CardiffN]
    *Apr 3 16:26:50.071: RADIUS: AAA Unsupported [150] 3
    *Apr 3 16:26:50.071: RADIUS: 32 [2]
    *Apr 3 16:26:50.071: RADIUS(000000FD): Storing nasport 247 in rad_db
    *Apr 3 16:26:50.072: RADIUS(000000FD): Config NAS IP: 10.201.1.5
    *Apr 3 16:29:29.041: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed
    *Apr 3 16:29:52.253: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed

    I have a very similar situation here. Took me a while to figure out why existing user certificates are OK but no new users can enroll. I checked all certificates for expiry. No go. It was not the expiry ("Valid to") time, but rather the "Valid From" time that is messed up.
    This is what happens: The rollover gets created and replaces the original one (which remains in memory, no flash) But the new one is valid from the expiry of the old one - in my case TOMORROW and after a power-outage the day before yesterday (the most definitive way to get a reboot!) I only have the new NOT YET VALID certificate.
    OK, I can wait until tomorrow and see if it works. But the design is far from intelligent. The industry standard is that when you renew a certificate, the validity of the new one is immediate - even if it means it runs for a few days longer than the designated lifetime.
    So much for the overlap period of 30 days (as you can see from your own post) if the old certificate goes away after a reboot and the new one is not yet valid! (The CA certificate expiration timer gets reset to some Unix time-zero ( 01:00:00 CEST Jan 1 1970) which I take to mean "not valid yet".)
    I only have a few days of trouble - and just one to go after finally working it out, but it could have been up to 30 days if I for any reason had rebooted after the roll-over certificate got created.
    Cheers
    Bernhard

  • I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location.

    I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE   TI/-Tmp-”
    I've also been getting others errors about cannot create or modify temporary files when trying to install other programs.  Also some of my documents on my computer will not open and crash. 
    Any help would be helpful.
    I've tried doing this as read not sure if it helps:
    ls -Odel $TMPD
    This is what I had in response:
    drwxr-xr-x  36 root  admin  - 1224 Dec  9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/

    Which os version are you using? 
    What is Lighthouse? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • Cannot delet or modify a discoverer viewer connection

    I created a connection with Discoverer Admin 9.0.2, then uninstalled, and installed 9.0.4. Now, in Discoverer Plus the old connection is there, but grayed out and undeleteable. What can I do to delete this obsolete connection?

    Hi Graeme
    I dont use the Atheros Client Utility and I dont know exactly how it works but a similar issue happened on my notebook with different WLan connection tools.
    I think all the options in the Atheros utility are grayed out because the WLan connection configuration will be done by Windows OS.
    Therefore you should firstly check if the option Use Windows to configure my wireless network settings in the Wireless network connection properties was disabled. If not do it!

  • Cannot load the roaming profile in MAC OS X  Leopard (10.5.4)

    Hi
    i am using leopard 10.5.4.my users have a default windows profile path at /Server HD/Users/Profiles/username.when i login from windows clients some users cannot load the profile.the following error is displayed in windows clients
    windows cannot load your roaming profile.
    please help me to resolve this issue
    regs
    S.Mohan

    Roaming profiles via Mac OSX Server are different from Roaming Profiles via Windows Server.
    Some things you must do, to keep the profiles syncing... First understanding that an database (db) files will create issues. Windows does not do a good job of releasing / unlocking the files. This will show up in Thumbs.db and newly created Favorites located within the profile.
    1. Disable thumbnail caching on the windows clients.
    2. Disable web client services (optional).
    3. Move any db,s (like ACT 2008) out of the profile.
    3. Move Favorites out to the profile (we use teakUI to relocate it to c://)
    On boot, the error that a roaming profile can't load, will also present (about 20 seconds) the path of the bad file.
    Hope this helps.

  • My boyfriend and I have our own iPhones but share an iPad. How do we create two different profiles or user accounts, etc?

    My boyfriend and I have our own iPhones but share an iPad. How do we create two different profiles or user accounts, etc?

    Unfortunately, at the moment you cannot create two user profiles on one iOS device.

  • I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloa

    I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloaded the numbers app thinking this would be a default software to open any and all spreadsheets.
    Please Help!
    Ipad 2- iOS5

    You may need a version without macros on it. Unfortunately, pretty much all apps are skinned down versions of their original program, often with less functionality. For example in a word document I can italicize,bold and underline, but I only have a handful of fonts to play with and I don't think I can insert tables or images.
    It is very possible that the app simply cannot run macros, which means that document may never work on an iPad.

  • Solution Manager EWA - cannot create session in satellite system

    "Hi,
    I want to configure EWA self service using Solman 4.0. I succesfully did the following :
    a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
    b. Assigned the system to a logical system.
    c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
    d. Activated and maintained required RFC in SDCCN in satallite system.
    My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
    Did I miss out any steps. Can any one share any help ?
    FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
    I  have the same problem as Solution Manager EWA - cannot create session in satellite system
    tried all of solutions,  but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

    Dear Sapbcer,
    Have you tried the following option :
    Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
    Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
    Hope this helps.
    Regards
    Amit

  • Cannot create HTTP client Exception in Http -- XI -- RFC scenario

    Hi,
    We are testing Http --> XI --> RFC scenario
    While testing this scenario from RWB we are getting following error message in the SXMB_MONI logs:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
      <SAP:P1>1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Cannot create HTTP client (exception 1)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Following is the info from the Trace:
      <Trace level="1" type="System_Error">cl_http_client exc = argument_not_found</Trace>
    We have tried following things:
    1. In SICF we made sure the /default_host/sap/xi/adapter_plain is active
    2. Applied SAP Note: 716739
    Any response will be greatly appreciated.
    Thanks,
    Paresh

    Hi UDO,
    Thanks for your reply. The error was gone when I tested again this morning. I am guessing it must be the SAP Note 716739 that we applied and might not have refreshed the cache.
    I am still intereseted in confirming what exacly fixed this issue.
    As per your suggestion, I looked at the left Nav bar and the error was at the "Call Adapter" step. Even in the log message it says the same. The reciever/interface determination and mapping were successfull. I could successfully test the scenario in the integration directory.
    Here is what the 716739 Note said:
    Symptom
    If you call the Integration Server from a sending Integration Engine (proxy), the following error message occurs:
    Category = XIServer
    Area = INTERNAL
    Id = CLIENT_CREATE_FAILED.
    In transaction SXMB_ADM, you used the Configure Integration Engine function to enter a URL of the type http://<host>:<port>/sap/xi/engine?type=entry instead of a URL of the type dest://<name>.
    Other terms
    SICF, SXMB_MONI, SXMB_ADM, XI
    Reason and Prerequisites
    You have configured the communication route from the sending proxy (Integration Engine) to the Integration Server using the URL of the type
    http://<host>:<port>/sap/xi/engine?type=entry and have saved the logon data on the Integration Server in the Service
    /sap/xi/engine (transaction SICF).
    A program error has occurred: the communication log is not correctly set when the HTTP client is set up.
    Solution
    The problem is eliminated with SAP_BASIS Support Package 2. To eliminate the problem, you can use an URL of the type dest://<name>, where <name>  refers to the name of a HTTP destination that you have maintained with transaction SM59.
    Now, I was not using the proxies but Http post to XI. Do you guys also think this might have fixed my issue?
    Thanks,
    Paresh

Maybe you are looking for