Satellite not showing wireless networks, adapter seems ok

my satellite is not showing wireless networks and i can't figure out what networks are available. the adapter seems to be working properly according to windows device manager. i had to uninstall configfree, although i'm not sure that caused any problem. i have had to run a bunch of anti-spyware programs, registry cleaners etc., system seems much better but a few glitches.

It's possible, but it might be a lot more work to do so. It all depends on how soon you need to get it fixed. I'm not a network specialist so I can't really offer much in the way of assistance other than what I already did. It's possible someone else might have other ideas, but since you didn't post this in the Networking and WiFi Forum where it belongs it's quite possible that those networking specialists will never even see your post to respond to it. I know that I rarely go into the Networking Forum as it isn't my strong suit.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

Cannot find wireless network adapter - Satellite A100-467

Hi,
I have Toshiba Satellite A100-467 running Windows 7 on it.
Yesterday I put my notebook to hibernation and when it woke up wireless network was not working.
I checked Device Manager and there is no wireless network adapter available, seems it is not enumerated by the system.
I have tried to download and reinstall drivers for Wireless network but without success.
Any suggestion?

I launched windows Backup and Recovery tool to see whether some software change had not disabled wifi adapter, that is what I meant.
There is no Ethernet Controller in Device Manager, nothing pointing to Wireless adapter.
I have tried to remove battery already before but it did not help. Tried again today with the same result.
Today my Wifi was suddenly working for a while, that made me think it would be probably a hardware issue, maybe something moved inside. I just wanted to rule out software issues before I send it to repair.
Now it is where it was before, not even displaying in Device Manager.

New Intel WIFI Wireless Network Adapter does not recognize Wireless Router

I have had a Linksys BEFW11S4 Version 4 Wireless router for quite some time. It works like a champ and I have one Laptop wired to it and a second using Wireless working just fine. Recently, I received a new ThinkPad W500 Laptop with an Intel WIFI Link 5100 AGN wireless network adapter. The older laptop that works just fine with the router uses a
11a/b/g Wireless LAN Mini PCI Express Adapter by Atheros. However, the NEW laptop with the Intel Adapter fails to connect to the Router. It will either indicate a failure while "Waiting for Association" or it will indicate a failure when waiting to "renew IP Address". Sometimes, it will show a signal strength close to ZERO (Even as the older laptop with the other adapter is showing a signal strength close to 100%) When I called Linksys support, I was told that the facts that the Router (a) works find with the wired Laptop and (b) works fine with the 11a/b/g NEtwork Adapter and (c) works fine when WIRED to the new laptop all indicate that the problem is NOT with the router at all -- but with the Network Adapter. Can anyone tell me what has to be adjusted in the Adapter settings? Right now, I am using IBM Access Connections for BOTH of the wireless laptops. I have made sure to set IDENTICAL values for SSID and WEP (128-bit) [static] password. I have also ensured that all OTHER settings are the same for the two laptops. Yet, in one laptop, there is NO PROBLEM while in the other, I can not get the Wireless Adapter to "see" the signal from the Router. TO further check this, I have [temporarily] disabled the WEP password, enabled SSID broadcast, and disabled the MAC address restrictions that I put in (so that the system would be totally "open") yet the Intel Adapter STILL did not "find" anything. In addition, when I use the "Find WIFI" feature in Access Connections, I find that SOMETIMES the network with SSID is found and sometimes, it will display "unknown network" and not pick up the SSID.
This is all very frustrating. If anyone has experience with the Intel WIFI Link 5100 AGN Adapter, I would appreciate any hints, tricks, ideas, etc.
Think you!!!!
--Zvi

I installed the LATEST version of IBM Access Connections as well as verifying that I have teh LATEST drivers for the Intel Wireless NEtwork Adapter.
What now happens is that I am able to authenticate to the Router. However, I get a failure on "renewing IP Address" -- which [according to the diagnostic message] means that the Rotuer fails to provide me with an IP address to use. Do you have any suggestions?

Atheros AR5007EG Wireless Network Adapter - With any driver: "The device instance name is invalid"

Hello there,
I was trying to install various "Atheros AR5007EG Wireless Network Adapter" drivers, with versions ranging from 2007 to 2010, both from the manufacturer and specifically for this computer (a Fujitsu Siemens Esprimo Mobile) and others from here:
http://www.atheros.cz/atheros-wireless-download.php?chipset=22&system=3
All of them are for Windows Vista 32bit.
The computer had previous drivers installed and working, but also had a network problem. In the process of figuring out what was causing it, I tried to install newer drivers to see if that was the problem. It turns out the network problem was due to a different
thing that is now fixed (some dependencies of the WLAN Configuration service were turned off), but I'm still stuck installing the new drivers.
TL;DR:
However, every time I install new drivers, after install, Windows says that
"The device instance name is invalid", regardless of what drivers I install. I even tried to install drivers for different hardware in that slot just to see what it told me and IT STILL gave me the same error. I also tried to uninstall the
current driver, checking the box to delete the driver's software, running CCleaner and then deleting
"athr.sys" from the Windows/Drivers folder and
"oem8.inf" from Windows/Inf as those files were referenced in the driver's properties. The install still gives me the same error.
The fact that it gives me this error with any driver leads me to believe it's Windows' fault and not the driver's.
Note: I am translating from the original in Portuguese. "The device instance name is invalid" is the closest/correct translation and seems about right with the info I find online regarding the english version of Vista and how it refers to devices.
This (https://groups.google.com/forum/#!topic/microsoft.public.development.device.drivers/yFa_XnlcLJQ) and this (http://finderr.net/windows/pt-PT/O-nome-da-inst%C3%A2ncia-do-dispositivo-%C3%A9-inv%C3%A1lido-/2082573452) also seems to confirm that, though it
doesn't help me. It may be that the text is actually different in english Vista but I also searched for driver instead of device or stuff like "The device instance name appears to be invalid" and can't find anything either.
I also did SFC /SCANNOW a while ago and it found no errors. I then repeated it again after this problem and this time, SFC found errors BUT it couldn't repair all of them. Here is the CBS log:
https://www.dropbox.com/s/bayum2rsezxpmre/CBS.log
Thank you for the help!
EDIT: The Notebook model is a Fujitsu-Siemens ESPRIMO Mobile V5535 and their support drivers can be found here (after specifying the OS and model):
http://support.ts.fujitsu.com/download/ShowFiles.asp
EDIT2:
The last SFC /scannow scan repaired everything left to repair. The system restore option can't be used because the earliest one still has the (suposedly faulty) drivers installed.
This computer has a Win Vista serial number, but no CD and the second partition doesn't have any kind of backup. The second partition is empty though. So, as a last resort, if I really don't have a choice, I'll try to do an upgrade install to see if that fixes
it and if that still doesn't fix it I'll have to move everything in the users folder to the second partition and format the first which is a bummer :/
EDIT: Here is the setup.api.log that was inside C:\Windows\Inf and details the instalation process of all the drivers:
https://www.dropbox.com/s/tyxs1e4r7rxofch/setupapi.dev.log
I'm still trying to read into that setup.api.log file.

So, can I assume that the only way to fix this error is to download an iso of Windows Vista, unninstall my service packs, upgrade install Vista, run Vistalizator to change the language to Portuguese and then install Service Pack 1 & 2?
EDIT: Alright, so I formatted the thing since the driver bug wouldn't give me a break. The details on that can be found searching for the same thread title either on tomshardware or vistaforums if anyone happens to find this looking for the same error.
I have a real knack for bumping heads with errors that nobody else gets that somehow turn into unfixable bugs. At least if someone else searches for this problem they'll know what to do.

WRT54G & XBOX 360 Wireless Networking Adapter-Router doesn't see my SSID

I purchased a XBOX 360 networking adapter yesterday. I hooked it up and serched for networks and it doesn't see my SSID through the linksys router. Before I purchased the 360 adapter, I could hard hook it to the router and it worked fine. I called 360 and they suggested that I open my MAC on the Linksys Router so that it would recognize it, but I do not know how to do that. I know how to get into 192.168.1.1, but don't want to do anything crazy. Please advise. I'm not a novice, but not an advanced router owner. Thanks,
WRT54G v.8

SSID Broadcast should be Enabled on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab-
Here select manual configuration...Wireless Network mode should be mixed...SSID Broadcast should be Enabled...Check what is your SSID(change the SSID if it is Linksys)...Click Save Settings if you have changed anything...
Click on the subtab Wireless Security, if the Security Mode is WPA/WPA2 change it to WEP, if it is WEP take not of Key1(this is your wireless security)...
X-Box Setting :
1. Connect the appropriate wireless network adapter to the console. On the Xbox, a Wi-Fi adapter that connects to the Ethernet port (sometimes also called a wireless network bridge) must be used. Alternatively, the Xbox 360 is also designed to work with certain Wi-Fi game adapters that connect to a USB port.
2. Turn on the console and navigate to the wireless settings screen. On the Xbox, the menu path is "Settings -> Network Settings -> Advanced -> Wireless -> Settings" On the Xbox 360, the menu path is "System -> Network Settings -> Edit Settings."
3. Set the SSID (network name) on the Xbox to match that of the wireless router. If your wireless router has enabled SSID broadcast, the SSID name should appear pre-selected on the Xbox display. Otherwise, select the "Specify Unlisted Network" option and enter the SSID there.
4. Specify "Infrastructure" as the Network Mode. (Infrastructure is the mode used by wireless routers.)
5. Set the Security Type to match that of the wireless router. If your router uses WPA encryption and the type of adapter connected to the Xbox does not support WPA, you will need to change your router settings to use WEP encryption instead.
Note that the standard Microsoft Xbox 360 Wireless Network Adapter supports WPA while the standard Microsoft Xbox Wireless Adapter (MN-740) only supports WEP.
6. Save your settings and verify the network is functional.
On the Xbox, the Wireless Status screen displays whether a connection has successfully been made with the wireless router, and the Connect Status screen displays whether a connection has successfully been made through the Internet to Xbox Live.
On the Xbox 360, use the "Test Xbox Live Connection" option instead.

Msi star key 2.0 3x faster wireless network adapter with windows 7

Hi,
I have msi star key 2.0 3x faster wireless network adapter product. Could anyone please provide me information whether it is compatible with both 32-bit and 64-bit Windows 7 operating system? Thanks in advance.

Quote from: tempaccount1234 on 05-April-11, 19:27:06
Could anyone please provide specific information? Will the Vista drivers work for Windows 7. I am not able to use them. Is there any setting required? Please help......
No Vista drivers often do not work in W7.
You better buy a new device that has W7 drivers.

Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

In my apple 4s model no a12221 not showing 3g network, in my apple 4s model no a12221 not showing 3g network

my iphone 4s 64 gb not showing 3g network...plz help

Thanks, that is no where near A12221. Check the back of the phone and see what the model number is there.
This shows as an AT&T iPhone 4S. Are you trying to use this with an AT&T network?

TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

When I connected iPhone 4,5 and 6 it's showing connected and working, only not showing wireless icon on top of screen

As per attached wireless design I have two outdoor access points connected to cisco 5508 controller, everything is working fine only problem is that when I connected iPhone 4,5 and 6 it's showing connected and working! only not showing wireless icon on top of screen (see the attached icon), but when I connected to Android like Samsung it's showing connected and showing icon as well top of screen.
Advanced thanks and highly appreciate

I have an iPhone 4, 5 & 6 and when successfully connected to the controller all does have the wireless icon on the top left. I don't think they are connected to the wireless... Might be associated, but not authenticated. Look at the client on the controller and see if they are in the policy state: RUN If they are not in the RUN state, then they are not connected.
-Scott

HT1695 Ipad will not find wireless networks that it used yesterday, but MacBook Pro still finds and uses these networks.

Our ipad will not find wireless networks that it used yesterday. Our Mac Book Pro finds them and uses them.
we have reset the cable modem and wireless router, turned off the ipad and turned it back on. Turned wireless off and back on.
but it just spins trying to find networks but finds none.
What do do next?

Settings for wireless network connections are actually stored in two separate places on your Mac, so in addition to the correct advice offered by Jolly Giant, you will also need to delete old network listings in KeyChain Access.
Macintosh HD > Applications > Utilities > KeyChain Access
Locate the name of the wireless network that you want to delete and click it to highlight it
Click Delete on your keyboard
It would be a good idea to go ahead and also delete the current connection as well in case it has become corrupted. This will clear out the old settings and when you next connect to the network and enter the password, the new settings will be preserved.

HT202639 Why My iPhone 4 Not Showing A Network Name So i Could Connect To Wifi ?

Why My iPhone 4 Not Showing A Network Name So I Could Connect To Wi-Fi ?

Hello Lil Bizz,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when Wi-Fi on your iPhone is not working as you would expect. In this situation, I would recommend the steps in the attached article to help troubleshoot this situation.
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Best regards,
Joe

WRT54GX4 Wireless Router and Xbox 360 Wireless Networking Adapter

I just got an Xbox 360 with a Wireless Networking Adapter. The adapter will recognize the network, but won't connect to it. Even if I remove the security, the Xbox 360 won't connect. Is there something else via the router I'm supposed to be doing? I called Microsoft and they said to open the port settings, but I don't know if that's really the issue and I don't know how to do that if I need to.
The ports they gave me were:
TCP 80
UDP 88
UDP 3074
TCP 3074
UDP 53
TCP 53
Thanks for any help if you can.

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Linksys WRT54G compatible with XBOX 360's Wireless Network Adapter?

Is the Linksys Wireless G Broadband Router (WRT54G) compatible with XBOX 360's Wireless Network Adapter?

Use the LAN port and cable. That way you'll get no interference and great data transfer. Or this maybe helps. http://www.xbox.com/en-US/support/connecttolive/xbox360/homenetworking/equipment.htm
Message Edited by iknownothink on 06-21-2007 03:44 AM

Satellite L500-19X - no wireless network adapter

Laptop says can only connect to the internet with an ethernet cable (how I'm connected now). After looking online at different forums I have tried everything that's been said, like install the wireless LAN driver, but nothing seems to work.
The only thing in the network adapters, in the device manager, is "Realtek PCIe FE Family Controller". So therefore no wireless one.
What should I do?

I did write exactly what I done but I won't let me post it for some reason!
Basically, downloaded zip folder, opened file inside, went through everything and said it would open setup automatically.
It didn't open automatically, so I opened the setup manually going through the C drive. Opened that file, went through and installed everything. It said it's successfully installed but still can't search for wireless networks and nothing has changed in the device manager.

Satellite not showing wireless networks, adapter seems ok

Similar Messages

Maybe you are looking for