Satellite P - Dust grain between display and front

Hello.
After some weeks suddently i have a dust grain between display and front glas.
how can it get there and I must therefore send in the notebook to service?
Greetings from germany and sorry about my bad english.

Hi
I think its difficult to say something about this but I think in this case you can do nothing. The only chance is contacting an authorized service provider because the technicians can disassemble the notebook and check this case. If you disassemble the notebook yourself you will loose the warranty so I wouldnt do this
If you dont know where is the nearest ASP you can search here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Just contact the technicians. You will see that its interesting to talk with them a little bit and they are friendly. ;)

Similar Messages

PLMD_AUDIT - Toggle between Display and Change - Important!!

Hello all,
I've a problem when I work on PLMD_AUDIT.
Pre-requisite for replicating the issue.
1> Change the settings in PLMD_AUDIT (a face like icon) to Display mode
When I run PLMD_AUDIT for an Audit with Action, it displays me the "Grouping" field and the "Involved Persons" tab values correctly.
But when I toggle from Display to Change, the value in "Grouping" and the "Involved Persons" tab vanishes.
Can you please check in your system and let me know if you also face this issue?
Thank you in advance,
Vaishnavi

Hello Keerthi,
Thanks for your reply.
Please follow the below mentioned steps.
1) Change your time zone to a different time zone other than the created time zone of the action.
say if action has been created in London time zone, change system zone to some other than London.
2) Change the Settings in PLMD_AUDIT tcode (face like icon) to Display
3) Open any audit WITH ACTION.
4) When you double click on Action inside the audit, the action will be opened in Display mode.
5) Now toggle between Display and Change.
6) Kindly check if the values in the "Grouping field" and BUPA roles in "Involved Persons" tab are present now after toggling?
Please let me know at the earliest.
Your assistance is highly appreciated in this regard.
Thanks in advance,
Vaishnavi

Miix 2 10" led diod on the switch filter between display and edge frame

Hello,
i have Lenovo Miix 2 10" and i find out, that indicative led diod on the switch filter between display and edge frame of tablet when is the dark.
It is obvious in the night and tablet is moderately incline...
https://onedrive.live.com/redir?resid=2193765AA1BD42F1!7232&authkey=!AJ7TZCTfNtVztuI&v=3&ithint=phot...
Is it reason for reclaim?
Thanks
sg

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

701: dust between display and glass

Hi there,
I have a beautiful Nokia 701 that I bought in March. I noticed that dust is getting into it, between the touchscreen glass and the display... it's really annoying to have a clearblack display or whatever it's called and see dust in between...
Could Nokia just put some sealant at the glass edge to prevent dust to come across? I had to dismantle my old 5800 and there was actually a thin ring made of some silicon rubber (or it was glue) at the edge, between touchscreen and display... and it stayed dust-free for three years... why can't a 0,01 cent rubber ring be added to a 701 shocks me!
Back to dust in my 701... Is there a way I can get rid of it?
Thanks!
m

I lost faith and decided to keep it as is. Also I'm considering dumping my 701's warranty and trying to do something on my own. Despite Nokia Care is run by kind and competent guys, I just can't get the reason why a NEW phone must undergo their intervention that often.
I'm sorry but I have to acknowledge POOR CONSTRUCITVE QUALITY, terrible organization in releasing firmware variants (701 has, only for 112.010.1404 sw version, 285 variants... a nightmare to roll-out).
I'll look for some how-to guide over the internet to learn to dismantle my 701 without damaging it, and then I will stick some sealant at the edge of my phone's display. Otherwise, I'll just keep it as is with all the dust until I find some other phone. Wouldn't be surprised if it's not another Nokia :-(

A slight gap between display and the aluminium housing

I just bought an iMac 2 months ago. Recently, while dusting off the display, I noticed a slight opening (about 2mm) between the display and the housing on the top side of my iMac. I worry that dust might accumulate inside the display over time.
Has anyone seen something similar on their iMac? Could this be a defect?
Regards.

Yeah, it's a defect alright. Just over the weekend, a yellow vertical line appeared towards the middle of my screen. I think this might be permanent, and somehow related to the slight opening on my iMac.
Called Apple Support. Was hoping they would exchange the entire machine for me, but no such luck

Re: Satellite A200-1AX - black image display and delay

My Satellite A200-1AX is 3 weeks old and its LCD was replaced by Toshiba Center here in Kuwait because of defects.
After placing the new LCD i have notice that whenever I am turning on and shutting the unit off, a delay of black image is being displayed and slowly disapperaing.
Can you please tell me if this is normal in appearance just like what the technician in Toshiba Service Center is telling me?
is there any problem with the installation of the new LCD?
I find this thing as an abnormal display when booting and shutdown state of the unit.
Hope you give sometime answering me and best regards.

Thank you Jack Black for your immediate response. I really do't know what transpire to that problem and maybe you are correct that it has something to do with the replacement. The image i am noticing wherein the Technician in Toshiba Service Center here in Kuwait saying that it is normal which I contradict is similar to this scenario, let say you blew up air in a glass or window, you will notice some fog on it and suddenly the fog will gone away.
That is how i describe the black image being display momentarily and and it is disapperaing very slowly which is not normal to compare with the laptop
i am using now which is also toshiba and to all the computers which i had used.
I am bothered with this and i suspect it might have some other problems after the replacement.
Again thak you and hope you can still help me to sort out this problem.

How to remove the dust between Lcd and Front glass (Early2009)

I just bought the new Imac less than 1 month
then I found the dust over there
---Should I go to the apple store????

You can quite easily remove the glass front, it's only held on with magnets.
Use either a sucker, like that of a car sat nav or mobile phone holder, or if you dont have that, just get a bit of parcel tape and stick it firmly in the bottom lower corner and gently pull and the glass comes straight out no problems, peel the tape off, doesnt leave a residue then when you've done cleaning offer the glass back upto the frame and the magnets will grab it back into place.

Formation of moisture between LCD and front panel in a iMac

Hi Guys
I am using a 21,5" iMac for the last 18 months or so. Every monsoon (which is pretty heavy in Bombay) I face a strange problem. A few minutes after starting the mac, moisture starts accumulating between the LCD panel and the front glass which covers it. I have complained to Apple several times but there is no satisfactory reply. In fact one of their service center girls sent me this email explaining the reasons behind this problem
Hi , Sir !
Greetings of the day ............
This is with regards of ongoing problem with your iMac display issue.
I have understand it from the technician who have visited your place regarding this issue.Pls correct me ,if your imac display issue is different than belows.
Problem Reported: u see Some fog/condensation forms in that middle or corner of the screen(behind the glass). computer, But after turning it ON a large spot is clearly visible. [Deepak J] Your understanding is Correct .After turning of the computer, The fog disappears in just about 20 or 30 minutes.[Deepak J] No its not correct that fog/condensation goes in 20 or 30 minutes rather it takes more than 8 to 10 hours to get disappear and nature of the problem is intermittent. This is an environmental issue that happens with most of the iMacs here in mumbai during monsoon.it is because of humidity/moisture in the air.mostly it happens if there is a open window right behind the iMac or imac is very close to the AC.[Deepak J] My early PC which I used for more than 5 Years was also kept in the same way / environment in which iMac is Kept & I bought iMac for 4 times more than the Cost I purchased my Old PC.
Since the iMac goes Glass > Space > LCD it wouldn't be totally surprising that condensation would show up there if there is a lot of humidity and the temp variations between the outside of the glass and the inside of the glass.
The space between the glass and lcd is not air tight. The glass is just a "cover" and not affixed to the actual LCD. It's held on by some magnets but there's still air going to and from between the lcd and the section that connects to the glass. It's like when you get condensation/ie., fogged windows in a car. The temp difference the air outside the glass and the air inside the glass as well as both surface sides it's a matter of physics that a fog will appear if the conditions are optimal.
So,only few below things can help u in this case.
1.Keep the iMac On,as much u can.we can keep the system in sleep all the time with energy saver settings.we will help u to do the same.[Deepak J] I use PC for Max to Max 2 to 4 hours in a Week so are you suggesting that I keep the PC on for rest of 160 Hours
2.use of de-humidifier will might help.[Deepak J] Can you please tell me what is de-humidifier ?
3.Removing the glass panel(But not advisable.)[Deepak J] I don’t want to do that
Trust me ,it happens only in rainy seasons where humidity level is very high in our city and there is no technical solution to fix this as imac is design that way.[Deepak J] This the First rainy season after I purchased iMac
Hope,the above information will help u.
Pls let me know ,if u need any more information from our side.--
Thanks & Regards,
Rupali Mandve
Admin Asst.
For
 Unicorn Infosolutions Pvt. Ltd.
301, Kotia Nirman, New Link Road
Andheri (W), Mumbai - 400053
Tel: +91-22-67354000
Mobile :- 9769276811
[email protected]
www.uipl.co.in
Its pretty obvious from this email that they have no clue on how to solve this problem. Combined with the fact that Lion has a lot of bugs, my impression is "Apple is the new Microsoft".
whats your experience guys
best regards
Tejash

Hi Shilpa
Its not the lack of testing. I am sure moisture is a problem in many other parts of the world. More irritating are the 'suggestions' by so called apple experts.
One solution could be to seal it from all sides. Should be a pretty standard job.
best regards
Tejash R Majmudar

IPhone 5 - gap between display and metal frame

Hello, I have an iPhone 5 black and I found out that on top between metal frame and display is a gap where I can fit a paper. Is it okay? What should I do?

Have the same issue & plan to send to Apple to replace/repair. Was wondering if you know by chance how long this fix will take?
(Tried to reopen my support case to ask Apple directly but it keeps failing to open)
Thanks.

CMS Replication between Edge and Front End

Hello Support
We have a global Lync Deployment with CMS Store located in UK
We have installed new AU Lync-FE and Edge server but the CMS replication between Front End Server and Lync Edge is not working
I have test 4443 and certainly open. Lync Edge server or the FE server does not logs anything in event viewer.
I have used OCSlogger but I could not find any issue
I have checked certificates and they are all valid.
Can I please get some guidance.
Thanks
Naimesh Mistry
+61401446946
Naimesh Mistry

HI NImesh,
First if you are looking at Lync control panel you might see the Cross because Edge server is non domain machine.
you can check the command Get-CsManagementStoreReplicationStatus
Also there are Cert problem which could lead this issue
The root CA certificate should be located in Trusted Root Certification Authorities ONLY,
and must be removed from any other container.
The intermediate CA certificate should be located in Intermediate Certification AuthoritiesAND Trusted
People ONLY, and must be removed from any other container
Also create the below registry values.
created2 registry values in:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL as follows (to prevent schnnell.dll from
interfering with validating the certificates by Edge server):
Value
1:
Name: SendTrustedIssuerList
Type: DWord
Value: 0
Value
2:
Name: ClientAuthTrustMode
Type: DWord
Value: 2
then try to reboot the server and run this command Invoke-CsManagementStoreReplication
Hope this works.
Regards
Zahoor

Satellite P10 switching randomly between Battery and AC

I have a satellite P10 that's been having some strange power issues for about a year now.
My laptop will switch over to battery power even when plugged in. I will then either use the computer until the battery drains and have it shut down or hibernate before the battery will charge.
I thought I had fixed it by downloading and installing a new Bios from the toshiba website, which seemed to work for a while but now it the problem seems to have returned.
I have also bought a new battery and power bar, thinking this was the problem...but this did not solve the problem.
Anyone else out there with similar problems or a method of fixing this?
any thoughts would be great.

Hi Greg,
I suffered this phenomenon on my SA30-141, and by trial and error I found it to be a poor contact between the AC socket on the notebook and the AC plug on the adapter cable. Using the technique that Dennis described I tried waggling the power plug when it was connected and found that I could induce the notebook to switch to battery power following which it would not return to AC power without a complete re-boot.
I resolved this problem by anchoring the AC cable to the back of the notebook with a small strip of plastic wrapped around the cable and then clamped to one of the nuts on the back panel of the notebook with a spare bolt. This stopped any lateral movement of the AC plug when it was connected even if the notebook was moved about.
regards,

IPod touch has dust in between Glass and touch screen.

A few days ago I noticed there were several specs of dust inside my iPod touch screen. As the days have gone by, there are now considerably more, some of which are Very noticeable on bright or white pictures. They are mostly near the bottom which leads me to believe they've come in through the dock connector somehow, but there are some near the top of the display as well. I'm wondering if this is a known issue and whether or not it can be repaired or cleaned. Has anyone else had this issue?
Thanks in advance,
Simon Leonard

Maybe its just that model, or just you guys. Ive have my 8GB for a little over a month and I haven't had a problem like you are describing. Give Apple a call and see what they have to say it about it. Thats just my two cents.

Differences between authorization role display and display change document?

Dear All,
I want to know what are the differences between activity authorization between display and display document change?
Regards
Aishah

Dear Mr Robert,
thanks for replying me. actually, it is to prevent user from other dept to change the PO even print/message. when i check inside authorization the configuration is only for their own dept by putting dept code at pur org field of change. but still can change. it is because of the me22 layout screen?

Dual display and VRAM usage.

Hi, back in the days I wanted a 12" iBook but couldn't afford one, last autumn thought I decided to get a Macbook Pro, the update came and...
.. it had 128MB vram.
I want to use dual screen and maybe even occasional gaming, I couldn't decide if this where sufficient for my needs or not so I waited for the june update.
The mid-07 MBP arrived and, it had 128MB vram AGAIN!
Why oh why Apple? Oh, don't answer that, it's because you're in bed with Intel and want to force feed us useless highest end CPUs. But all I care for is the VRAM, why do I have to pay a ****-of-a-lot for a 1/11th faster CPU?
Anyway, I tried to decide if I should "bit the sour Apple" and get the mid modell or just get the low one because that one is much more price worthy. A few days ago I ordered the low end one.
But then I've seen on barefeats that he says that a 30" ACD display would use 128MB vram of the 256MB vram modell, are vram always splitted between displays in OS X?
You see, if the extra 20" 1680x1050 display only use 1680x1050x(3 or 4) bytes that is ok, maybe even if it's double buffered (is it?), because then I will probably have like 100MB vram left for all my windows and for desktop usage that is probably ok. But if the vram is shared between displays and my 20" which I will use most only get 64MB vram that's quite low.
I know I can turn of the sleeping capabilities of the MBP and shut the lid and only use one screen but that's a quite lame solution.
I hate how Apple does this, and it seems to worry a lot of people. Some get the more expensive modell and hate that they had to do it, some doesn't, and some don't buy a machine at all .. I would probably have stayed in the last crowd.
256MB vram can't have cost them many tens of dollars, why not have that in all modells? Why is the middle one even needed? Just make 2.4GHz CPU and option in that case.
Anyway, does anyone know how much vram my screen will have available? Will 128MB work for me with all the regular desktop apps I will have running? Or should I really go with the 256MB one? The tricky part is that my MBP might be shipped today or similair.
I've called Apple support three times but noone of them knows how this works so they aren't for much help.
(Dell vostro 1500 sells here in Sweden for less than half the price of the mid MBP and comes way more balanced, you can even get a 1680x1050 screen. Sure it has 2.0GHz CPUs or whatever but I don't care about that. Where is the old "omg MHz myth"-Apple? Please understand CPU speed isn't everything. Instead of leading the MHz myth fight it ;D, start calling the CPUs T7300 and so on aswell ;D)

Hi Johan, actually the VRAM used by OS X is likely to be quite a bit more than just your screen resolution multiplied by 3 or 4, since each open window is composited offscreen for the shadow effects and for things like zooming (Ctrl-Mousewheel) and the "Genie effect".
I'm pretty sure the total VRAM isn't divided in half for each of the two displays though, as it will be allocated from the video driver on an as-needed basis. In practice, with both displays active and a few windows open, you should still have maybe 80-90% of your VRAM available for applications.
Games and other VRAM-heavy applications are a special case as these will typically use as much VRAM as you can give them, and swap out to system RAM via the PCI-X bus when they need more (and unlike swapping to disk, swapping into VRAM from system RAM is still pretty fast).

[help] have any distortion between printing and monitor

Our company has long used Photosop adobe cs 2 cs of the series served until thepresent cs 4,
why yes we can not print as the existing color on the monitor screen?often darker, sometimes the color is too far off the mark?
what more whenassociated with skin color?
is there an additional tool for adobe Photosop CS4 to solve this problem?
pliss help

graphic design division in my office often foul - tempered because it was hard to find the desired color in Photoshop or other graphics programs, but when printed color is always misses and sometimes very different, ie green is desired, but printed to be brown. I've tried setting up the monitor for more light and use a color profile that is in the program phototsop, but still, the results differ between display and printouts

Satellite P - Dust grain between display and front

Similar Messages

Maybe you are looking for