Satellite P10-504 WXP driver for video, modem and SM bus controller

I have just had to replace the hard disk in my P10-504 and I now have lots of problems!
1 - I used the retore disks and XP home is installed BUT the video, modem and SM bus controller all all flagged in Control Panel and not having drivers installed! The modem I can live without but I would like the video to work properly and the SM bus controller is also pretty essentil. Guess what, I can't
a) find my model listed on the Toshiba website and
b) I can't find drivers for either the video or SM bus controller.
I have downloaded the 'universal' Nvidia driver but it doesn't work! As for the SM bus controller, I've no idea where to look!
Any ideas please?
Thanks
Tim

Hi
Your posting is a little surprise because all XP drivers for your notebook must be available on the Toshiba driver page.
Did you choose the right notebook series and did you download and install all necessary drivers???
As first its important to install the chipset utility and depending on installed graphic card
You have to choose and to install the right display driver!
Again! The drivers are on the page!
http://eu.computers.toshiba-europe.com -> Support & Downloads -> Support page -> driver download

Similar Messages

  • Satellite c885d-s5202 Laptop Device USB2.0-CRW AND MS Bus Controller

    I need how for issued my Satellite c885d-s5202 Laptop Device Usb2.0-CRW AND MS Bus Controller  Troubleshoothing  update  error massage displayed : Windown could not fin driver software for device. Also I tried download Toshiba driver update ready install but not working correctly....error massage Deteted Incampable ..Please help me ...thank you ...Have a nice day!

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

    Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below).  I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below!  Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

    Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable.  I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

  • I need drivers for PCI device and SM Bus controller

    I have a Hp 2000-2d19wm and I downgraded from win8 to win7. Now I'm trying to install the drivers and I can't find them on the HP website. Please help me.
    This question was solved.
    View Solution.

    Hi:
    You need this driver for the smbus controller...
    http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_118001_1
    You need this driver for the PCI Dev:
    Realtek Card Reader Driver
    File name: sp64801.exe

  • What format is best for an external hard drive for video editing on a mac?

    What's the best format for an external hard drive for video editing to be use with a mac only? I need to format my new hard drive and want to be sure I choose the right format.

    I concur with Kappy. His suggestion is correct.
    Allan

  • Multiple Hard Drives for Video Editing with Premiere Elements 8?

    I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
    The camcorder I used to shoot the footage is a Sony Handycam with  model number HDR-SR12. It's a digital HD video camera recorder that  shoots in NTSC 1920x1080i HD  recording. The footage was shot with AVC  HD  9M (HQ), which records in higher image quality mode. The  video  camera is connected to my computer through a USB cable.
    The  computer  itself is a Windows 7 desktop computer. The CPU is an HP  Pavilion Elite  HPE-150f PC with Intel Core i7-860 processor. I imported  the video into  Premiere by selecting "File" --> "Get Media From"  and then choosing the third  option from the top.
    My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
    At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
    Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
    Thanks for the help.

    staring-into-space wrote: My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    When you import the footage is there a red line across the whole of the timeline?
    staring-into-space wrote:
     I recreated the video, with Elements, and never ran into the problem.
    As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • What is the best way to set up an external drive for video storage

    What is the best way to set up an external drive for video storage?

    Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
    FAT32 and NTFS formatting will not work with iMovie.
    If necessary, you can reformat using Disk Utility.
    Make one large partition. No need for multiple partitions.
    Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

  • What is the best External Hard Drive for video edition?

    Hi guys, I'm looking for a good firewire external hard drive for video edition.
    I have 2 HD already but the bigest is a Seagate and is a trouble cause this one have an auto sleep system that is impossible to put out and when I'm printing to tape this one fall to sleep and the video that I'm transfering get a delay horrible!!
    I'm looking for a 1 tb or 2 tb external HD.
    Can you recomend me something??
    thanks a lot!

    Gufa wrote:
    Thanks Jouu, great prices but I need to know if those discs doesnt have the autosleep function!
    Thanks
    That was why I mentioned the 24/7 live Chat support, they (should) know the products they sell.
    8^)
    Joe

  • Need advice on purchasing an external hard drive for video editing

    Hi,
    I looking for advice on which external hard drive to get. The main purpose for the hard drive will be storing video files on for use with Final Cut Pro. I have the 12 inch powerbook G4 so I plan to use the FireWire (400) port to connect the drive. I'm interested in getting comment from others who use their external hard drives for video editing.
    Thanks!

    Firstly your decision to use FireWire is a good one, as not only will it free up the USB it performs much better on sustained transfers.
    That said you're still limited by the FireWire interface, so opt for a drive with a big cache (16MB would be good) and fast spindle speed (7200rpm+).
    Some of the newer enclosures are compatible with SATA drives. While these are easier to install and theoretically will perform better, I'm not sure that the performance would justify the extra cost.
    Matt

  • Satellite L30-114 - Need driver for sound and SM bus controller

    Hi, friends
    Plz I need your help on my Satellite L30-114. Am having problems with the sound and the SM bus controller, even I have downloaded the sound driver and install it, from my device manager sound is not sick, it always telling me my device is working properly? Plz i need help on that.
    Secondly my SM bus controller is sick it has the cormer sign plz how can I rectify it, even my wireless is working fine.
    Only the sound and sm bus controller is giving problems.
    Thanks will be waiting for your replies.
    newton

    Hi
    To be honest I doubt that you have installed all files from the Toshiba website. Normally the Toshiba website contains all drivers and tools that you need to restore factory settings after this there are no more yellow exclamation marks or unknown devices in device manager.
    By the way: What installation order you have used?
    On the Toshiba website you can find the installation instructions document. This is a list for the recommended driver installation order.
    Check this!!!

  • Driver for apple modem

    windows recognizes external apple modem in parallels, and wants to install it, but there is no driver. where do i get a driver for apple modem that windows will recognize in parallels?

    I'm not sure this will work in Parallels but Apple's Boot Camp software creates a drivers disk for Windows, which includes a driver for the USB modem. You might try downloading Boot Camp to get to the driver.
    Otherwise, I would suggest posting your question in the Parallels forums <http://forums.parallels.com/>.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

  • Satellite A100 (PSAA9) Display Driver for Windows Vista

    Hi Everyone,
    This link doesnt work so I didnt install my display driver for Windows Vista and system performance look really terrible. I wondering nobody use Satellite A100 (PSAA9) and Windows Vista. Because I was searching this driver on internet but i coudnt fint it anywere. This situation made me so sick.
    How can I warn or send e-mail to Toshiba customer support about broken link. Or anyome know direct download address for Vista driver? Please help me asap :(
    15/02/07 Display Driver nVidia Windows Vista 97.54
    Thanks for your help,
    Mehmet from Istanbul

    Hi Daniel,
    Thank you for post and advise. I downloaded Satellite P100 (PSPA0E) nVidia display driver but it doesnt work. Its look same but problem is doesnt support my display card. Its really strange and Toshiba doesnt fix yet :S
    15/02/07 Display Driver nVidia Windows Vista 9.7.5.4 World Wide
    http://support.toshiba-tro.de/tools/vista/nvi/display-vista-9754.zip

  • Satellite 1000-Z2: I need a driver for the display and the LAN

    Hi
    I have reformatted my laptop S1000-Z2, and I am having real trouble trying to find any information on this model !
    Basically I need a driver for the display, and the LAN ?
    Best Regards,
    Austin.

    What OS do you use???
    If you use the XP you will not find the LAN driver on the recommended driver site!
    I can not give you any advices where to find such driver because I dont know what LAN card is installed in your oldie.
    But why you dont check this yourself? Try to find out what LAN card you use and googel a little bit for compatible applications ;)

  • Can I use an external drive for Time Machine and storing other data?

    At the moment I have one external drive, a 500gb LaCie. My internal drive is 160gb. I don't think I'll be using all 500 of those gigabytes for a while, so I want to put them to good use. Can I make a partition on this drive and use that for Time Machine, leaving the rest of the drive for my documents and other files? If so, how would I partition the drive? I'm not fluent in Disk Utility and even though I'm pretty sure I know how to do it, I don't want to screw up. Also, how big a partition would you recommend?
    While we're here, I have a second question, somewhat relevant to the first. Could I move my Time Machine backups to a second drive if I wanted to? Also, if I used a big drive (say 1tb) could I use Time Machine to backup my current LaCie to a partition on that drive? Thanks in advance.

    videoCWK wrote:
    Does that also mean that I could back them both up on a very big drive?
    Yes. Time Machine will, by default, back up all of your external drives unless you specifically exclude them.
    Also, will Time Machine backups eat all my space after a lot of usage?
    It depends on what you do on your Mac. If you work often with very large files (video editing, heavy photo editing, big disk images, Microsoft Entourage data file, Parallels disk image file, etc) then your backup drive could fill up very quickly.
    I use my Mac mostly for e-mail, web browsing, iTunes, iPhoto, and the occasional iMovie project. I have 92 GB on my main hard drive (60 GB of which are my iTunes and iPhoto libraries, and one iMovie project.) My Time Machine backups consume 155GB on my backup drive, and that's after using Time Machine for a full year.

  • One Format External Hard Drive for Your Mac and PC...

    I have Formatted my External HD Passport 500GB = (465.8) and split it in two partition Mac OS Extended (Journal = 232GB) and FAT32 (Ms-Dos-FAT = 232GB) and reformat to NTFS using Windows...
    How to use one External HUD for your Mac and PC you have a PC and how to have two Partition in Mac OS Extended (Journal) and FAT (Ms-Dos-FAT)as you desire the size of your partition under application, Utilities and Disk Utility and covert the (FAT32) to (NTFS)using Windows Control Panel or just search by Start, search Computer Management or just right my Computer and format the second partition to (NTFS)
    Tips for Mac OS Extended (Journaled) FAT32 vs NTFS, what works and don't work...
    (1)Mac OS Extended (Journaled) Partition can't be use in Windows to transfer files but NTFS Partition can be use in Mac by transferring file from Windows to Mac and NTFS support for files over 4G in size...
    (2)FAT32 can be use in Mac and Windows but with a limitation that a file cannot be transferred to a FAT32 partition if the file is larger than 4GB such as a video file and FAT32 file system performs more slowly than NTFS...
    (2)Mac OS Extended (Journaled) can be use in Windows when you Reformat your HD to HFS+ by third-party app such as http://www.macdrive.com/ MacDrive for $50.or http://www.paragon-software.com/home/ntfs-mac/ NTFS For Mac 6.0 for $30...
    Reference link 1 External Hard Drive for Your Mac and PC...
    http://www.myfirstmac.com/index.php/mac/articles/1-external-hard-drive-for-your- mac-and-pc
    Best regards...
    JamesUFOs...
    http://www.youtube.com/user/JamesEBEs

    I have many external drives I use between my MacBook Pro and my Windows PC's. I use a free NTFS driver for Mac OS-X to give me full read/write access to any NTFS formatted partitions when running Mac OS. I also use MediaFour's MacDrive v8 on some of my Windows PC's to access any HFS+ formatted partitions.
    Most of my drives are formatted NTFS because I have more Windows machines than I have MacDrive licenses, and with the driver for Mac OS, they are fully accessible. I have a few drives I do keep formatted as HFS+ because I have encountered an app or two that don't work quite right when they don't get to write to files on an HFS+ partition (one of my backup programs is picky about this).
    As said before, FAT32 is fully accessible between the two OS'es but it also has it's own limitations.

Maybe you are looking for