Satellite P10-804: How to remove the HDD?

I'd like to remove the 60Gb internal hard drive from my satellite P10-804 and replace it with a bigger drive, but cannot figure out how to get inside the case to remove the HDD.
Does anyone have details on how to do this?

Hi
In my knowledge the HDD must be placed under the optical dirve.
To remove the HDD, first remove the battery pack and optical drive, then follow the steps below:
1. Remove four black screws securing the aluminum shield covering the HDD and lift it out.
2. Gently pull the HDD toward the computers front panel to disconnect it from the system board, then lift it out.
3. Remove the four silver screws that secure the HDD case to the HDD.
But be careful. If you have no experiences ask someone with more experience in such replacements.

Similar Messages

Satellite P10-804: How to enable the battery icon visible on the task bar?

how do I do enable the battery icon visible on the task bar? currently I can only have the type of power save mode e.g. bulb & colour.
I have tried to activate right clicking taskbar/properties/notification areas, found required icon & instructed to always show, however the batery icon remains hidden.
Help??

One question: Did you try to set several settings in the Windows own power options?
However, I would say some registry keys are corrupt and therefore the battery icon cannot be displayed in the task manager.
Probably only the new installation can help you displaying the icon in the task bar.

S35dvd: How to remove the HDD?

Can anyone tell me how to remove a hard drive from a s35dvd please? I can not find a service manual anywhere and I need to remove the drive to try to remove a load of viruses that i can't remove with windows running or even in safe mode.
Thanks

Hi
Unfortunately this Toshiba unit it unknown to me and I dont have found any officials documents about the HDD replacing.
But as far as I know there should be only 2 possibilities how to remove the HDD.
1.) The HDD slot is placed at the bottom of the unit and you need to remove only the HDD cover.
Or
2.) The HDD is placed in the notebook. In this case you have to remover the keyboard and some covers to replace the HDD
Well, I can give you only this info. I think if you want to know the detailed instruction you should contact the Toshiba service partner because he has a more detailed informations about such cases.

Satellite 1410-902: How to remove a HDD

Hi. Does anyone know how to remove a HDD from a Toshiba Satellite 1410-902?
Opening the panel there it is the HDD, but there is no clear way to get it out...I don't want to force.
Thanx for the help.
Luca.

Hi
The HDD slot is placed at the bottom of the unit. You have only to remove the screw which secures the slot cover. Then you can simply remove the HDD.
But be careful.

How to remove the HDD passwordon Portege R500?

Hello,
do you know how to remove HDD password? I know current password, but if I try to remove it by changing from current password to blank password it doesn't work.
There is still current password.
Thanks

Hi
I hope you are using the correct and right HDD password because its needed to remove and to delete the existing HDD password.
If you would forget the HDD password then the HDD would be locked and you would be not able to unlock the HDD!!!
Generally the HDD password can be deleted in the BIOS.
Please ensure that other password would be removed too.
I found a useful forum thread about a similar HDD password issue:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=66386&#66386
According to the info posted by user jonr17 you should firstly ensure that all other passwords like BIOS, User and Supervisor passwords are removed.
Then try to remove the HDD password from the BIOS.
Bye

Satellite A200-10X: How to partitioning the HDD

Hi there guys!
I have a pro with my satellite A200-10X, it has only one HDD volume, and i want to make them two... and everytime i use the product recovery CD, it formats the HDD... but i do not know how to partition the HDD two get two volume spaces...
and whats worse is that when i keep on doing that over and over it eats the HDD free space... so how can i partition the HDD and recover the 200GB space the computer originally have?
i appreciate your help ..
thanx

Hello Sherif
If you use delivered recovery media you have follow options:
1. the whole HDD capacity can be used for partition C
2. the HDD capacity can be split and you can create two partitions
When you use both options Vista will create 1,4 GB partition but this partition will not be visible when you use OS.
If you want to have two partitions (C and D) start recovery procedure and after choosing the language use SETUP button on the right side. In the middle of the screen occurs small window and there you can set how much capacity should be reserved for partition C. when the recovery procedure is finished and Vista starts open Computer Management.
On the left side choose Disk Management. After doing this on the left side you will see partition marked as black. This is second partition but still not visible. Click there with right mouse button and choose option to create logical drive. Follow the setup procedure.
After few steps this partition will be set as logical drive and after formatting it will be visible in Vista Explorer.
If you have more questions please post again.
Bye

Satellite Pro A120: How to remove the CD/DVD drive

I have 2 main problems and can't seems to fully open case.
Does anyone know how to remove the dvd-rom?
But my mainproblem is the power swith ribbon (blue) has come loose from the motherboard. But as i can't fully open the case im using tweezers to try to recconect it.
Doesn't seem to want to go in.
Is there a clip on the motherboard connector or is it just push in? A photo or diagram would be useful.
Any help would be appreciated.
thanks

One question; why do you do this?
I mean why your want to open the notebook?
Fact is that the Pro A120 Satellite is not a old notebook and I presume the warranty is valid.
If you remove the notebook covers you will lose the warranty!!!
The CD/DVD removing is very easy.
Usually it is secured with one screw which can be found at the bottom of the unit. You have to remove it firstly and then it should be able to take off the ODD.

Satellite Pro 4260: How to remove the DVD drive?

I have a Satellite Pro 4260 and it appears that the DVD drive is broken and I want to replace it. I cannot figure out how to remove the old one.
Does anyone know how? Is there a manual available showing how?
Thanks

Hi
This notebook is not know to me but a checked some sites in the net and it seems that the top cover must be removed.
Then lift up the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD board from PJ15 on the system board.
Remove two screws securing the CD-ROM/DVD-ROM connector board.
Separate the CD-ROM/DVD-ROM connector board and CD-ROM/DVD-ROM connector brace from the CD-ROM/DVD-ROM drive
Well, I think its not easy for someone with no experience.
Therefore if you dont know how to do it and you have no much experience you should ask someone how knows what to do ;)

Tecra R10 - How to remove the HDD?

Is there a description available hoe to remove a harddisk in a Tecra R10 and plugin a new harddisc?

Hi buddy,
As far as I know the HDD is placed under the notebook cover and therefore a lot of parts must be removed like CD drive, keyboard, base assy, etc.
In my opinion its a tricky procedure and should only be done from a notebook technician because a lot of screws must be removed as well.
Is current HDD defective or why you want to exchange it?

On a new imac how much of the HDD is already used with the OS,iLife,apps..

Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
cheers

Here's are some disk usage information from my 20" white C2D. The numbers
are running totals that include periodic software updates and some of my own
stuff -- but that would be less than 0.5 GB of the final total.
OS-X with "no optional packages" is a very usable system; it includes 'core'
applications such as Safari, iTunes, Quicktime. It does not include any of the
iLife apps or the iWork/MS_Office test-drive bloatwares.
The large increase in disk usage for a minimum Leopard system is partly due
to the inclusion of more apps in the 'core' OS package. Some things that were
optional in Tiger have become part of the "minimum" Leopard install.
The Xcode software development tools are a standard part of every OS-X
distribution, but since most customers have no use for them, they're not
included in the factory-installed disk image. If you don't plan to install
them, subtract 3.4 GB from the final tally.
Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
IMO, 250 GB is FAR more than you'll ever need for installable software plus
a sizeable collection of music/photos. OTOH, no amount of disk space will
ever be enough for an avid music/photo/video junkie, and everyone should
have an external backup drive. So, stick with the standard internal drive and
buy more external storage.
...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
Looby

How To Remove The Hard Disk On A HP Pavilion Slimline s5220y Desktop

Hello. I need to replace the HDD on my wife's s5220y pc. This model has a case that only the side panel comes off . Other simular models have a case that the side and bottom panel comes off in a L shape making it easy to remove the HDD. Can someone explain to me how to get the HDD out of this model or refrence me to a video or a diagram. Thanks much.
This question was solved.
View Solution.

Hi:
Please see if the info in the upgrading and servicing guide is of help to you:
http://h10032.www1.hp.com/ctg/Manual/c01859458.pdf

Satellite P10-804 wireless card upgrade

Hi,
Ive been trying to find a list of compatible wireless cards to upgrade my Satellite P10-804 but can't find any.
The the current wireless card is a Toshiba PA3171U-1MPC but it doesnt do the 802.11G standard and no WPA security.
Anyone know of what are good replacement cards that will work on my laptop?
Ive come across this one but Im not sure if it is compatible or not as I can't find any compatibility info for it: PA3416U-1MPC
Thanks,
Mark

Hi
I think the PA3416U-1MPC should be compatible.
I mean the notebook supports the miniPCI Wlan card and the PA3416U-1MPC is a miniPCI Wlan card.
The WLan antenna behind the notebooks screen should be connected to the connectors placed on miniPCI WLan card.
The two connectors are marked with MAIN and AUX. Normally a white cable goes to the MAIN and a black to the AUX
bye

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

Satellite P10-804: How to remove the HDD?

Similar Messages

Maybe you are looking for