Satellite P10-835, Instructions to connect to wifi using Atheros client utility?

i have a P10-835 and need to configure the Atheros client utlitiy to connect to a Netgear 834G wireless router. Are there any instructions on how to configure the Atheros client?

Hello
1. START button > All Programs > Atheros > ACU > Atheros Client Utility
2. 2. Select "Profile Management" tab an click on "New"
3. Put the right Profile name and Network name
4. Check Security tab and put the password if your network is encrypted
5. Check also if the windows wireless configuration disabled it
(IT MUST BE DISABLED if you use some client for wireless connection)
You can find this option in Wireless Network Connection properties under Wireless networks.
Bye

Similar Messages

If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

At your end you will be using your WiFi signal. At the other end the iPhone would be using the 3G cellular signal. The cellular plan would need to be provisioned to allow FaceTime calls over cellular.

I can not connect to wifi using iphone 4s

I can not connect to wifi using iphone 4s

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

Connect to Wifi using LEAP in iOS 8.1

I was able to connect to wifi using LEAP (Lightweight Encryption Authentication Protocol) credentials with iOS 7.1 but as soon as I updated to iOS 8.1, I am not able to connect any more.
Did some R&D over this, got to know that Apple has explicitly disabled LEAP due to some security reasons.
Please comment if there is some solution or workaround to fix this issue.

Hi,
Have you test that other device could find this AD-Hoc network? You can try to recreate this network for test.
Based on my research, An ad hoc network is automatically deleted after all users disconnect from the network or when the person who set up the network disconnects and goes out of range of the other users of the network, unless you choose to make it a permanent
network when you create it. Therefore, please check whether you encountered similar situation.
I suspect that the error message means that the profile “MyNetwork2” doesn’t exist. Therefore, you may create the profile first.
To do this, please refer to the section “add profile” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary]
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Roger Lu
TechNet Community Support

Satellite MX35X: Atheros Client Utility cannot create or modify profiles

Atheros Client Ultility is all greyed out. Won't let me create or modify profiles. Under the Profile Management tab, eveyrthing is greyed out. Any ideas?
I'm trying to set up a wireless connection for my Satellite MX35x and have just switched isp's to AOL if that helps. I've tried updating the drivers and have also reinstalled the Client Utility from the recovery disc.
I'm stuck!

Hi Graeme
I dont use the Atheros Client Utility and I dont know exactly how it works but a similar issue happened on my notebook with different WLan connection tools.
I think all the options in the Atheros utility are grayed out because the WLan connection configuration will be done by Windows OS.
Therefore you should firstly check if the option Use Windows to configure my wireless network settings in the Wireless network connection properties was disabled. If not do it!

Satellite P10-873 Wireless LAN Connection

Hi all,
I have a Satellite P10-873 laptop. I've just purchased a Netgear DG834GT wireless modem/router and cannot get fully connected to the internet via Tiscali (ISP).
The problem manifests itself in that I can connect to the router and can even ping various sites on the net. However trying to connect to a site using MSIE I just get "cannot connect" rejection page.
In addition using the CMD prompt, attempting a Telnet session to a web site on port 80 is rejected e.g "www.bt.com 80".
I've set all security to a minimum with no effect.
I have an other notebook which connects and functions perfectly with the Netgear/Ticali setup. I've also identically configured MSIE on both machines without success.
Does anybody have any ideas what could be causing this???
Thanks Mike
[Edited by: admin on 14-Oct-05 11:49]

I have just set up the same router/modem (yesterday). I had a similar problem until I disabled Norton's Personal Firewall. (Windows Firewall already disabled) It then connected and I set up Nortons again afterwards (despite the manual saying do not use 3rd party firewalls. I also need help with my P10-304. I can't get the Intel 2200BG wireless minicard to work. Any ideas?

Can I connect to wifi using a dongle.

I have ipad 2 with wifi not 3G. Can I use a dongle to connect to wifi?

A dongle will not work. Get a Mi-Fi.
http://en.wikipedia.org/wiki/MiFi

I cannot connect on WiFi using my Airport Express even though the light is green

Why can't I connect via WiFi even though my Airport Express shows a green light?

Hi Jose,
Thanks for visiting Apple Support Communities.
If you can't connect to your wireless network, trying these steps first can help to isolate the issue:
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router...
See the full article for more troubleshooting steps:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
If you're using an iOS device, see this article as well:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Best,
Jeremy

ORA-12154: TNS:could not resolve the connect identifier specified using TOAD client

I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.

948021 wrote:
I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.
see: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ (ora-12154 TNS:could not resolve the connect identifier specified)
And for background info
see: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
see: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ ( Help! I can’t connect to my database (part duex) )

Connect to Oracle using DAC Client in command line

Hi,
I'm trying to connect to Oracle DB using DAC client. I have configured a connection and tested, it works. When I use the connection to connect to the DB, its giving me an error
"unknown error, please start in command line mode and see the stack error"
How do I start in command line mode? Could anyone provide more information on this.
Thanks in advance,
RK

In oracle db, you can create 3 different types of users:
(1) create user x identified by pwd.
In this case the user x will connect to the db using username/password, in this example x/pwd
(2)create user ex identified externally;
In this case the user ex will connect to the db using "/" and the sqlnet.authentication_services parameter value in the client and server sqlnet.ora will be used in determining the oracle external authentication adapter to use. For oracle windows client/db server, this is by default set to NTS. NTS is the oracle windows authentication adapter.
(3)create user gx identified globally as 'CN=gx,O=Oracle';
In this case also the user gx will connect to the db using "/" and oracle ssl will be used to authenticate this user to the db.
It would not be possible to "Create user x identified externally" and connect with x/pwd.
Please clarify.
To help you in isolating the problem, I will need the following info:
(1)
what are you connecting as to execute your plsql. Are you using sqlplus ? How are you connecting (connect "/ as sysdba", connect "/", connect x/pwd) ?
(2)
what create user statement did you use to create the user
(3)
is odp.net and the db server on the same machine.
(4)
did you run your plsql from the same machine as the db server.
(5)
if odp.net is on a different machine than db server, did you try connecting from odp.net machine to db server, using sqlplus ?

Can connect to exchange using eM Client, but not Outlook 2013

Hi There,
I have been using eM client to connect to an exchange server with no problems for months. The reason I chose eM Client was because it was free (ha) and it could sync my email, calendar and contacts using Exchange Web Services (EWS).
But then I decided to make the plunge and get myself an Office account so I could use Outlook. The problem is I just can't connect. I have to use a address in eM client that ends with ews/exchange.asmx to connect, but for there is no option
to that in outlook.
Thanks for any help.
Mike
(Also, in case I am in the wrong place, I was referred here after I posted @ answers.microsoft.com)

Hi Mike,
Is there any update on this thread?
As Ed mentioned, have you checked the settings of outlook anywhere ?
In addition, you can refer to the following article to configure:
Configure Outlook Anywhere in Outlook 2013
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Satellite P10: How to enable Intel 2200BG WiFi card

Hi
I have a Satellite psp10e which I have recently installed an Intel 2200BG WiFi card. After having problems getting it to switch on I have put tape on pin 13 on the card to switch the radio on.
I have installed all the latest drivers/ BIOS updates and spending hours searching the internet I am still yet to find a cure to get the hardware switch/fn+f8 and the WiFi led to work.
Is there something that anybody has figured out to make the hardware switch/led work? There must be a better cure than a piece of tape!!! It is it the BIOS that has anything to do with the hardware switch?

You cannot get it work with the switch because the Toshiba wireless cards have another pin to power off. And noone knows that pin. You could get one original toshiba from somewere and put it in and check out which pin is connected to the power switch.
Then you could change the pins on the new 2200b/g card. As the pins are very small and close together - it is nearly impossible to isolate them... But make your try ;)

After a power interruption, iMac no longer connects to wifi using time capsule. IPad connection to wifi remains intact.

I am prompted "the network (network name) requires a wpa password." after inputting my password, I have no success. Network status is on but is not connected to a network.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

How do I get my MBP to connect to WiFi using WPS?

I keep forgetting my WiFi password, and since my router has one of those fancy WPS buttons, I wanted to use it to get online.
HOWEVER, I can't seem to on my MBP. All it says is "Enter Paraphrase" and there isn't any option for using WPS. Google isn't any help, and keeps pointing me to .wps support which is not what I'm looking for.
Do I need to upgrade my OS or did I miss any patches? Alternatively, do I need to install any third party software to get WPS working?
Cheers,
W

Thanks for your helpful response. I do have an Apple TV device that is hooked up to my TV & router and is working OK. I can link to iTunes on my main computer and stream photos etc OK. The Apple TV device also links to internet OK.
What I can't get to Apple TV device to do is link to my IPad2. I followed the instructions on using & setting up Airplay, and found the Airplay symbol OK,. When I tap it it shows my iPad & Apple TV. When I tap on the TV symbol it doesn't show the dialogue box indicated. I can't seem to get the iPad to stream from Photos, and the iPad doesn't show up on the TV under Computers.
Clearly I am doing something wrong, but what?
Any ideas?

Not able to connect to wifi using iPhone 4 with OS5, sees the network but won't connect.

Recently upgraded my iPhone 4 to the OS5 and I keep having sporadic issues with connecting to my home wifi, it sees the network but never connects. I turned of Location Services and Cellular Data for that had worked sometimes, but now it just keeps spining and never connects. I tried to reset network settings, reset my wifi router and reset my phone and nothing, it will connect at my church for example and other places but not at home. I have MAC addressing security set on my router and I verified my iPhone MAC address is authorized. Any other suggestions?

Try restarting your router first, turn it off for a minute then back on. then go to settings on your phone, then wifi, tap on the blue arrow to the right of your wifi 's name, then tap forget this network. Then go to the home screen, Then hold the home and off button down until the apple symbol comes up. Then go back into wifi and try to connect.

Satellite P10-835, Instructions to connect to wifi using Atheros client utility?

Similar Messages

Maybe you are looking for